Freescale Semiconductor Technical Data MC100ES6056 Rev 4, 06/2005 2.5 V/3.3 V ECL/PECL/LVDS Dual Differential 2:1 Multiplexer MC100ES6056 The MC100ES6056 is a dual, fully differential 2:1 multiplexer. The differential data path makes the device ideal for multiplexing low skew clock or other skew sensitive signals. Multiple VBB pins are provided. The VBB pin, an internally generated voltage supply, is available to this device only. For single-ended input conditions, the unused differential input is connected to VBB as a switching reference voltage. VBB may also rebias AC coupled inputs. When used, decouple VBB and VCC via a 0.01 µF capacitor and limit current sourcing or sinking to 0.5 mA. When not used, VBB should be left open. The device features both individual and common select inputs to address both data path and random logic applications. The 100ES Series contains temperature compensation. DT SUFFIX 20-LEAD TSSOP PACKAGE CASE 948E-03 Features • • • • • • • • • • EJ SUFFIX 20-LEAD TSSOP PACKAGE Pb-FREE PACKAGE CASE 948E-03 360 ps Typical Propagation Delays Maximum Frequency > 3 GHz Typical PECL Mode Operating Range: VCC = 2.375 V to 3.8 V with VEE = 0 V ECL Mode Operating Range: VCC = 0 V with VEE = –2.375 V to –3.8 V Open Input Default State Separate and Common Select Q Output Will Default LOW with Inputs Open or at VEE VBB Outputs LVDS Input Compatible 20-Lead Pb-Free Package Available VCC Q0 Q0 20 19 18 1 SEL0 COM_SEL SEL1 17 16 15 0 ORDERING INFORMATION Device MC100ES6056DT TSSOP-20 MC100ES6056DTR2 TSSOP-20 MC100ES6056EJ TSSOP-20 (Pb-Free) MC100ES6056EJR2 TSSOP-20 (Pb-Free) VCC Q1 Q1 VEE 14 13 12 11 1 0 1 2 3 4 5 6 7 8 9 10 D0a D0a VBB0 D0b D0b D1a D1a VBB1 D1b D1b Warning: All VCC and VEE pins must be externally connected to Power Supply to guarantee proper operation. Figure 1. 20-Lead Pinout (Top View) and Logic Diagram © Freescale Semiconductor, Inc., 2005. All rights reserved. Package Table 1. Pin Description Pin Table 2. Function Table Function D0a* – D1a* ECL Input Data a D0a* – D1a* ECL Input Data a Invert D0b* – D1b* ECL Input Data b D0b* – D1b* ECL Input Data b Invert SEL0* – SEL1* ECL Indiv. Select Input COM_SEL* ECL Common Select Input VBB0, VBB1 Output Reference Voltage Q0 – Q1 ECL True Outputs Q0 – Q1 ECL Inverted Outputs VCC Positive Supply VEE Negative Supply SEL0 SEL1 COM_SEL Q0, Q0 Q1, Q1 X L L H H X L H H L H L L L L a b b a a a b a a b * Input function will default LOW when left open. Table 3. General Specifications Characteristics Value Internal Input Pulldown Resistor 75 kΩ Internal Input Pullup Resistor 75 kΩ ESD Protection Human Body Model Machine Model Charged Device Model > 4 kV > 400 V > 2 kV Thermal Resistance (Junction-to-Ambient) 0 LFPM, 20 TSSOP 500 LFPM, 20 TSSOP 140°C/W 100°C/W Meets or exceeds JEDEC Spec EIA/JESD78 IC Latchup Test MC100ES6056 2 Advanced Clock Drivers Device Data Freescale Semiconductor Table 4. Absolute Maximum Ratings(1) Symbol VSUPPLY Characteristic Conditions Power Supply Voltage VIN Input Voltage IOUT Output Current Rating Units Difference between VCC & VEE 3.9 V VCC – VEE ≤ 3.6 V VCC + 0.3 VEE – 0.3 V Continuous Surge 50 100 mA mA ±0.5 °C IBB VBB Sink/Source Current TA Operating Temperature Range –40 to +85 °C Storage Temperature Range –65 to +150 °C TSTG 1. Absolute maximum continuous ratings are those maximum values beyond which damage to the device may occur. Exposure to these conditions or conditions beyond those indicated may adversely affect device reliability. Functional operation at absolute-maximum-rated conditions is not implied. Table 5. DC Characteristics (VCC = 0 V, VEE = –2.5 V ± 5% or 3.8 V to –3.135 V; VCC = 2.5 V ± 5% or 3.135 V to 3.8 V, VEE = 0 V) Symbol IEE VOH –40°C Characteristics Min Power Supply Current 0°C to 85°C Typ Max 30 60 VCC–960 VCC–880 Min Unit Typ Max 30 60 mA VCC–930 (1) VCC–1085 VCC–860 mV (1) VCC–1950 VCC–1695 VCC–1500 VCC–1950 VCC–1705 VCC–1500 mV Output HIGH Voltage VCC–1025 VOL Output LOW Voltage VIH Input HIGH Voltage VCC–1165 VCC–880 VCC–1165 VCC–880 mV VIL Input LOW Voltage VCC–1810 VCC–1475 VCC–1810 VCC–1475 mV VBB Output Reference Voltage VCC–1380 VCC–1290 VCC–1220 VCC–1380 VCC–1290 VCC–1200 mV VPP VCMR Differential Input Voltage (2) Differential Cross Point Voltage IIH Input HIGH Current IIL Input LOW Current (3) 0.15 1.3 0.15 1.3 VCC –2.3 VCC–0.8 VCC –2.3 VCC–0.8 V 150 µA 150 0.5 0.5 V µA 1. Output termination voltage VTT = 0 V for VCC = 2.5 V operation is supported but the power consumption of the device will increase. 2. VPP (DC) is the minimum differential input voltage swing required to maintain device functionality. 3. VCMR (DC) is the crosspoint of the differential input signal. Functional operation is obtained when the crosspoint is within the VCMR (DC) range and the input swing lies within the VPP (DC) specification. MC100ES6056 Advanced Clock Drivers Device Data Freescale Semiconductor 3 Table 6. AC Characteristics (VCC = 0 V; VEE = –2.5 V ± 5% or –3.8 V to –3.135 V; VCC = 2.5 V ± 5% or 3.135 V to 3.8 V; VEE = 0 V)(1) –40°C to 85°C Symbol fmax tPLH, tPHL Characteristics Min Maximum Frequency D to Q, Q SEL to Q, Q COM_SEL to Q, Q tSKEW Skew Output-to-Output(2) Part-to-Part tJITTER Cycle-to-Cycle Jitter VCMR tr / tf Max >3 Propagation Delay to Output Differential VPP Typ 300 300 300 200 Differential Cross Point Voltage 500 600 650 ps ps ps 10 50 200 ps ps 1 ps 800 1200 mV VCC–1.1 V 230 ps VCC–2.1 Output Rise/Fall Time (20%–80%) 70 GHz 400 430 490 RMS (1σ) Minimum Input Swing Unit 120 1. Measured using a 750 mV source, 50% duty cycle clock source. All loading with 50Ω to VCC–2.0 V. 2. Skew is measured between outputs under identical transitions. Duty cycle skew is defined only for differential operation when the delays are measured from the cross point of the inputs to the cross point of the outputs. Q D Driver Device Receiver Device Q D 50 Ω 50 Ω VTT VTT = VCC – 2.0 V Figure 2. Typical Termination for Output Driver and Device Evaluation MC100ES6056 4 Advanced Clock Drivers Device Data Freescale Semiconductor PACKAGE DIMENSIONS PAGE 1 OF 3 CASE 948E-03 ISSUE B 20-LEAD TSSOP PACKAGE MC100ES6056 Advanced Clock Drivers Device Data Freescale Semiconductor 5 PACKAGE DIMENSIONS PAGE 2 OF 3 CASE 948E-03 ISSUE B 20-LEAD TSSOP PACKAGE MC100ES6056 6 Advanced Clock Drivers Device Data Freescale Semiconductor PACKAGE DIMENSIONS PAGE 3 OF 3 CASE 948E-03 ISSUE B 20-LEAD TSSOP PACKAGE MC100ES6056 Advanced Clock Drivers Device Data Freescale Semiconductor 7 How to Reach Us: Home Page: www.freescale.com E-mail: [email protected] USA/Europe or Locations Not Listed: Freescale Semiconductor Technical Information Center, CH370 1300 N. Alma School Road Chandler, Arizona 85224 +1-800-521-6274 or +1-480-768-2130 [email protected] Europe, Middle East, and Africa: Freescale Halbleiter Deutschland GmbH Technical Information Center Schatzbogen 7 81829 Muenchen, Germany +44 1296 380 456 (English) +46 8 52200080 (English) +49 89 92103 559 (German) +33 1 69 35 48 48 (French) [email protected] Japan: Freescale Semiconductor Japan Ltd. Headquarters ARCO Tower 15F 1-8-1, Shimo-Meguro, Meguro-ku, Tokyo 153-0064 Japan 0120 191014 or +81 3 5437 9125 [email protected] Asia/Pacific: Freescale Semiconductor Hong Kong Ltd. Technical Information Center 2 Dai King Street Tai Po Industrial Estate Tai Po, N.T., Hong Kong +800 2666 8080 [email protected] For Literature Requests Only: Freescale Semiconductor Literature Distribution Center P.O. Box 5405 Denver, Colorado 80217 1-800-441-2447 or 303-675-2140 Fax: 303-675-2150 [email protected] MC100ES6056 Rev. 4 06/2005 Information in this document is provided solely to enable system and software implementers to use Freescale Semiconductor products. There are no express or implied copyright licenses granted hereunder to design or fabricate any integrated circuits or integrated circuits based on the information in this document. Freescale Semiconductor reserves the right to make changes without further notice to any products herein. Freescale Semiconductor makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does Freescale Semiconductor assume any liability arising out of the application or use of any product or circuit, and specifically disclaims any and all liability, including without limitation consequential or incidental damages. “Typical” parameters that may be provided in Freescale Semiconductor data sheets and/or specifications can and do vary in different applications and actual performance may vary over time. All operating parameters, including “Typicals”, must be validated for each customer application by customer’s technical experts. Freescale Semiconductor does not convey any license under its patent rights nor the rights of others. Freescale Semiconductor products are not designed, intended, or authorized for use as components in systems intended for surgical implant into the body, or other applications intended to support or sustain life, or for any other application in which the failure of the Freescale Semiconductor product could create a situation where personal injury or death may occur. Should Buyer purchase or use Freescale Semiconductor products for any such unintended or unauthorized application, Buyer shall indemnify and hold Freescale Semiconductor and its officers, employees, subsidiaries, affiliates, and distributors harmless against all claims, costs, damages, and expenses, and reasonable attorney fees arising out of, directly or indirectly, any claim of personal injury or death associated with such unintended or unauthorized use, even if such claim alleges that Freescale Semiconductor was negligent regarding the design or manufacture of the part. Freescale™ and the Freescale logo are trademarks of Freescale Semiconductor, Inc. All other product or service names are the property of their respective owners. © Freescale Semiconductor, Inc. 2005. All rights reserved.