NT353 Semiconductor NPN Silicon Transistor Descriptions • Switching application • Interface circuit and driver circuit application Features • • • • With built-in bias resistors Simplify circuit design Reduce a quantity of parts and manufacturing process Complementary pair with NT354 Ordering Information Type NO. Marking NT353 Package Code B SOT-923 unit : mm • Equivalent Circuit 0.90~1.10 0.05 Max. 0.75~0.85 OUT 0.55~0.65 0.36~0.42 IN 0.15 Max. 0.36~0.43 R1 0.22 Max. 0.35 Typ. 0.27 Max. Outline Dimensions R2 COMMON PIN Connections 1. IN 2. COMMON 3. OUT KSD-T5G003-000 R1 R2 10KΩ 10KΩ 1 NT353 Absolute Maximum Ratings (Ta=25°C) Characteristic Symbol Rating Unit Output voltage VO 20 V Input voltage VI 15,-10 V Output current IO 50 mA Power dissipation PD 50 mW Junction temperature TJ 150 °C Tstg -55 ~ 150 °C Storage temperature range Electrical Characteristics Characteristic Output cut-off current (Ta=25°C) Symbol IO(OFF) Test Condition VO=20V, VI=0 Unit - - 500 nA 60 - - - DC current gain GI Output voltage VO(ON) IO=5mA, II=0.25mA - - 0.15 V Input voltage (ON) VI(ON) VO=0.2V, IO=5mA - 1.8 2.4 V Input voltage (OFF) VI(OFF) VO=5V, IO=0.1mA 1.0 1.2 - V VO=10V, IO=5mA - 200 - MHz VI=5V, IO=0 - - * VO=5V, IO=10mA Min. Typ. Max. Transition frequency fT Input current II Input resistor (Input to base) R1 - 7 Input resistor (Base to common) R2 - 7 0.88 mA 10 13 KΩ 10 13 KΩ * : Characteristic of transistor only KSD-T5G003-000 2 NT353 Electrical Characteristic Curves Fig. 2 IO - VI(OFF) ㎂ Fig. 1 IO - VI(ON) Fig. 3 GI - IO The AUK Corp. products are intended for the use as components in general electronic equipment (Office and communication equipment, measuring equipment, home appliance, etc.). Please make sure that you consult with us before you use these AUK Corp. products in equipments which require high quality and / or reliability, and in equipments which could have major impact to the welfare of human life(atomic energy control, airplane, spaceship, transportation, combustion control, all types of safety device, etc.). AUK Corp. cannot accept liability to any damage which may occur in case these AUK Corp. products were used in the mentioned equipments without prior consultation with AUK Corp.. Specifications mentioned in this publication are subject to change without notice. KSD-T5G003-000 3