FEDL7582B-06 Issue Date: Jun. 21, 2012 MSM7582B π/4 Shift QPSK MODEM 1/29 FEDL7582B-06 MSM7582B 2/25 FEDL7582B-06 MSM7582B 3/25 FEDL7582B-06 MSM7582B 4/25 FEDL7582B-06 MSM7582B 5/25 FEDL7582B-06 MSM7582B 6/25 FEDL7582B-06 MSM7582B 7/25 FEDL7582B-06 MSM7582B 8/25 FEDL7582B-06 MSM7582B 9/25 FEDL7582B-06 MSM7582B 10/25 FEDL7582B-06 MSM7582B 11/25 FEDL7582B-06 MSM7582B 12/25 FEDL7582B-06 MSM7582B 13/25 FEDL7582B-06 MSM7582B 14/25 FEDL7582B-06 MSM7582B 15/25 FEDL7582B-06 MSM7582B 16/25 FEDL7582B-06 MSM7582B 17/25 FEDL7582B-06 MSM7582B 18/25 FEDL7582B-06 MSM7582B 19/25 FEDL7582B-06 MSM7582B 20/25 FEDL7582B-06 MSM7582B 21/25 FEDL7582B-06 MSM7582B 22/25 FEDL7582B-06 MSM7582B Notes for Mounting the Surface Mount Type Package The surface mount type packages are very susceptible to heat in reflow mounting and humidity absorbed in storage. Therefore, before you perform reflow mounting, contact ROHM’s responsible sales person for the product name, package name, pin number, package code and desired mounting conditions (reflow method, temperature and times). 23/25 FEDL7582B-06 MSM7582B REVISION HISTORY Document No. FEDL7582B-02 FEDL7582B-03 FEDL7582B-04 Date Nov. 2001 Page Previous Current Edition Edition Description – – Final edition 2 – – Final edition 3 13 13 Partially changed the Transmitter Digital Input/Output Setting Time.. 13 13 Added tM12 Corrected values of Serial Port Digital Input/Output Setting Time 15 15 Added tM12 Corrected Figure 8 Serial Control Port Interface Jul. 2004 Jun. 8, 2007 FEDL7582B-05 Oct. 13, 2011 – – Company Name Change FEDL7582B-06 Jun. 21, 2012 – – Modification of property information 24/25 FEDL7582B-06 MSM7582B NOTES No copying or reproduction of this document, in part or in whole, is permitted without the consent of LAPIS Semiconductor Co., Ltd. The content specified herein is subject to change for improvement without notice. The content specified herein is for the purpose of introducing LAPIS Semiconductor's products (hereinafter "Products"). If you wish to use any such Product, please be sure to refer to the specifications, which can be obtained from LAPIS Semiconductor upon request. Examples of application circuits, circuit constants and any other information contained herein illustrate the standard usage and operations of the Products. The peripheral conditions must be taken into account when designing circuits for mass production. Great care was taken in ensuring the accuracy of the information specified in this document. However, should you incur any damage arising from any inaccuracy or misprint of such information, LAPIS Semiconductor shall bear no responsibility for such damage. The technical information specified herein is intended only to show the typical functions of and examples of application circuits for the Products. LAPIS Semiconductor does not grant you, explicitly or implicitly, any license to use or exercise intellectual property or other rights held by LAPIS Semiconductor and other parties. LAPIS Semiconductor shall bear no responsibility whatsoever for any dispute arising from the use of such technical information. The Products specified in this document are intended to be used with general-use electronic equipment or devices (such as audio visual equipment, office-automation equipment, communication devices, electronic appliances and amusement devices). The Products specified in this document are not designed to be radiation tolerant. While LAPIS Semiconductor always makes efforts to enhance the quality and reliability of its Products, a Product may fail or malfunction for a variety of reasons. Please be sure to implement in your equipment using the Products safety measures to guard against the possibility of physical injury, fire or any other damage caused in the event of the failure of any Product, such as derating, redundancy, fire control and fail-safe designs. LAPIS Semiconductor shall bear no responsibility whatsoever for your use of any Product outside of the prescribed scope or not in accordance with the instruction manual. The Products are not designed or manufactured to be used with any equipment, device or system which requires an extremely high level of reliability the failure or malfunction of which may result in a direct threat to human life or create a risk of human injury (such as a medical instrument, transportation equipment, aerospace machinery, nuclear-reactor controller, fuel-controller or other safety device). LAPIS Semiconductor shall bear no responsibility in any way for use of any of the Products for the above special purposes. If a Product is intended to be used for any such special purpose, please contact a ROHM sales representative before purchasing. If you intend to export or ship overseas any Product or technology specified herein that may be controlled under the Foreign Exchange and the Foreign Trade Law, you will be required to obtain a license or permit under the Law. Copyright 2012 LAPIS Semiconductor Co., Ltd. 25/25