Surface Mount JYPQ-30+ JYPQ-30 Power Splitter/Combiner 2 Way-90° 50Ω 16 to 30 MHz Maximum Ratings Operating Temperature Features • low insertion loss, 0.2 dB typ. • good isolation, 28 dB typ. -40°C to 85°C Storage Temperature -55°C to 100°C Power Input (as a splitter) CASE STYLE: BJ293 +RoHS Compliant 1W max. Permanent damage may occur if any of these limits are exceeded. Applications • HF • radio communication • instrumentation • modulators Pin Connections SUM PORT 8 PORT 1 (+90°) 1 PORT 2 (0°) The +Suffix identifies RoHS Compliance. See our web site for RoHS Compliance methodologies and qualifications e and Reel Available Tapra cost at no ext Devices/Reel 10, 20, 50, 100, 200 500 Reel Size 7” 13” 4 GROUND Electrical Specifications 2,3,6,7 50 OHM TERM EXTERNAL 5 FREQ. RANGE (MHz) Outline Drawing ISOLATION (dB) INSERTION LOSS (dB) Avg. of Coupled Outputs ABOVE 3 dB PHASE UNBALANCE (Degrees) AMPLITUDE UNBALANCE (dB) fL-fU Typ. Min. Typ. Max. Max. Max. 16-30 28 20 0.2 0.7 3 1.5 Typical Performance Data Frequency (MHz) Total Loss1 (dB) Outline Dimensions ( inch mm ) K .065 1.65 D .100 2.54 L .425 10.80 E .230 5.84 F .100 2.54 G .100 2.54 wt grams 0.80 Demo Board MCL P/N: TB-216 Suggested PCB Layout (PL-100) Phase Unbalance (deg.) VSWR S VSWR 1 VSWR 2 S-2 16.00 16.40 16.80 17.40 18.00 3.78 3.70 3.62 3.51 3.41 2.63 2.70 2.77 2.87 2.96 1.15 1.00 0.85 0.64 0.45 30.28 30.10 30.04 29.86 29.65 89.48 89.43 89.44 89.41 89.46 1.15 1.15 1.15 1.15 1.15 1.04 1.04 1.04 1.04 1.04 1.14 1.14 1.15 1.15 1.15 19.50 21.00 22.50 24.00 25.50 3.20 3.05 2.93 2.87 2.85 3.18 3.36 3.51 3.62 3.70 0.03 0.31 0.58 0.75 0.86 29.20 28.73 28.27 27.84 27.38 89.52 89.55 89.61 89.77 89.94 1.16 1.16 1.17 1.18 1.19 1.04 1.05 1.05 1.05 1.05 1.15 1.16 1.16 1.17 1.18 27.00 28.40 29.20 29.60 30.00 2.85 2.89 2.94 2.97 2.99 3.74 3.75 3.73 3.72 3.70 0.89 0.87 0.79 0.75 0.70 26.98 26.55 26.31 26.18 26.05 90.19 90.32 90.50 90.61 90.72 1.20 1.21 1.21 1.22 1.22 1.06 1.06 1.06 1.06 1.07 1.18 1.19 1.20 1.20 1.21 1. Total Loss = Insertion Loss + 3dB splitter loss. JYPQ-30 TOTAL LOSS S-1(dB) 4.0 JYPQ-30 ISOLATION 33 4.4 S-2(dB) ISOLATION (dB) J .065 1.65 C --- TOTAL LOSS (dB) H .047 1.19 B .500 12.70 3.6 3.2 2.8 2.4 31 29 27 25 23 16 18 20 22 24 26 28 30 FREQUENCY (MHz) 16 18 20 22 24 26 28 30 FREQUENCY (MHz) electrical schematic JYPQ-30 PHASE UNBALANCE 90.8 PHASE UNBALANCE (Deg.) A .395 10.03 Isolation (dB) S-1 PCB Land Pattern Suggested Layout, Tolerance to be within ±.002 Amplitude Unbalance (dB) 90.4 90.0 89.6 89.2 16 18 20 22 24 26 28 30 FREQUENCY (MHz) Notes A. Performance and quality attributes and conditions not expressly stated in this specification document are intended to be excluded and do not form a part of this specification document. B. Electrical specifications and performance data contained in this specification document are based on Mini-Circuit’s applicable established test performance criteria and measurement instructions. C. The parts covered by this specification document are subject to Mini-Circuits standard limited warranty and terms and conditions (collectively, “Standard Terms”); Purchasers of this part are entitled to the rights and benefits contained therein. For a full statement of the Standard Terms and the exclusive rights and remedies thereunder, please visit Mini-Circuits’ website at www.minicircuits.com/MCLStore/terms.jsp Mini-Circuits ® www.minicircuits.com P.O. Box 350166, Brooklyn, NY 11235-0003 (718) 934-4500 [email protected] REV. E M151107 JYPQ-30 HY/TD/CP 170426 Page 1 of 1