2017-V1.0-0111 Specifications NFC Programmable LED Power Supplies LGHU-96CV Series, 96W PAIRUI ELECTRONICS No. 545 Museum Road Yangzhou, Jiangsu China 225009 Tel: 86 (514) 8279 1592 Fax: 86 (514) 8769 3159 2017 led power supplies PRODUCT SPECIFICATION NFC Programmable LED Power Supplies LGHU-96CV SERIES, 96WATT, IP67 RATING Features 5 Year Warranty Universal Input Voltage Range: 90~305Vac NFC Programmable Technology without driver power-on Constant Power Programmable Design Dim to Off Option All Round Protections: Short Circuit, Over Voltage, Over Current, Over Temperature Optional Dimming(0-10V, PWM, Timer) Applications √ Street Light √ Other Light Fixtures for Outdoor Use √ Tunnel Light √ Flood Light Electrical LGH U 96 - CV 40 A F Dim to off Blank = Non-dim-to-off F = Dim-to-off Dimming Blank = No dimming A = 3 in 1 dimming(0-10V, PWM, Timer) Maximum Output Voltage(Vdc) Output Mode Output Power(W) Input Voltage Range U = 90-305Vac Series Name PAIRUI ELECTRONICS www.pairuigroup.com Updated 2017-V1.0-0111 Page:1/10 led power supplies PRODUCT SPECIFICATION Electrical Nominal Input Voltage Constant Power Output Voltage Range Programmable Constant Current Region Working Voltage Range Certificate LGHU96-CV36 100-277VAC 24-36V 1600-4000mA 14.4-36V CE, UL LGHU96-CV48 100-277VAC 36-48V 1070-2670mA 21.6-48V CE, UL LGHU96-CV80 100-277VAC 48-80V 800-2000mA 28.8-80V CE, UL LGHU96-CV140 100-277VAC 80-140V 480-1200mA 48-140V CE, UL LGHU96-CV233 100-277VAC 140-233V 270-690mA 84-233V CE, UL Part Number NOTE: Other output models are may available on request. PAIRUI ELECTRONICS www.pairuigroup.com Updated 2017-V1.0-0111 Page:2/10 led power supplies PRODUCT SPECIFICATION INPUT PARAMETER CONDITIONS MIN TYP MAX UNITS Input voltage 90 305 Vac Input frequency 47 63 Hz A A Input current Full load, Vin=115Vac Full load, Vin=230Vac 0.94 0.45 Inrush current Cold start, Vin=230Vac Power factor(PF) Full load, Vin=115Vac Full load, Vin=230Vac 0.99 0.97 Efficiency Full load, Vin=115Vac Full load, Vin=230Vac 87 90 % % Surge voltage L-N L, N-FG 4 6 KV KV 65 A PAIRUI ELECTRONICS www.pairuigroup.com Updated 2017-V1.0-0111 Page:3/10 led power supplies PRODUCT SPECIFICATION OUTPUT PARAMETER CONDITIONS Line regulation Vin from 100Vac to 277Vac ±0.3 % Load regulation Vout from min. to max. ±0.6 % 2%Vo mVp-p Ripple THD Output load≥50% MIN TYP MAX UNITS % 20 Protection Short circuit In hiccup mode, it will recover automatically after fault condition is removed Over voltage 130% Vout, in hiccup mode, it will recover automatically after fault condition is removed Over current 95~108%, constant current limiting, it will recover automatically after fault condition is removed Over temperature In hiccup mode, it will recover automatically after fault condition is removed PAIRUI ELECTRONICS www.pairuigroup.com Updated 2017-V1.0-0111 Page:4/10 PRODUCT SPECIFICATION led power supplies Environment PARAMETER CONDITIONS MIN Ambient operating temperature Startup at rated voltage (Derating required) Operating relative humidity TYP MAX UNITS -35 +70 ℃ Non condensing 10 100 % Storagetemperature Humidity 5 ~ 100% RH - 40 + 85 ℃ MTBF Fullload, 220Vac input, 25℃ambient temperature(MIL-HDBK-217) 200 Temperature coefficient ±0.05%℃(0~50℃) Vibration 10~500Hz, 5G 12min./1 cycle, period for 72 min. each along X,Y,Z axes Waterproof rating IP67 Dimension(LxWxH) 207.0 x 70.0 x 37.0mm Weight 760g Khrs Safety/EMC Safety Design refer to UL8750, UL935, CSA-C22.2 No.107.1, EN61347-1, EN61347-2-13 Withstand Voltage I/P-O/P: 3.75KVAC Isolation resistance I/P-O/P: 100M ohms/500VDC/25℃/70%RH EMC Emission Compliance to EN55015, EN61000-3-2 Class C(≥60% load), EN61000-3-3 EMC Immunity Compliance to EN61000-4-2, 3, 4, 5, 6, 8, 11, EN61547, EN55024 NOTE: Unless otherwise specified, all the above parameters are measured at ambient temperature of 25℃andVin=100Vac to 277Vac. PAIRUI ELECTRONICS www.pairuigroup.com Updated 2017-V1.0-0111 Page:5/10 led power supplies PRODUCT SPECIFICATION Mechanical 300±20 Black(ACL) White(ACN) Green(FG) 130 Tc 30 300±20 Red(V+) Black(V-) 70 207 180 37 37.2 PAIRUI ELECTRONICS www.pairuigroup.com Updated 2017-V1.0-0111 Page:6/10 led power supplies PRODUCT SPECIFICATION Electrical Curve DERATING CURVE STATIC CHARACTERISTIC CURVE 100 Load(%) Load(%) 100 80 40 20 -15 -30 15 0 30 40 50 60 70 80 40 20 90 100 120 150 180 210 240 270 305 Temperature(℃) Input voltage(Vac) THD vs Load PF vs Load 20% 0.98 0.94 15% THD PF 0.90 0.86 0.82 10% 5% 0.78 0.74 50 60 70 90 80 100 0% Load(%) 50 60 70 80 90 100 Load(%) Efficiency vs Load Efficiency(%) 92 90 88 86 120V Input 84 220V Input 82 80 277V Input Lifetime(KHr) 50 135 120 105 90 75 60 45 30 15 0 45 60 70 80 Load(%) 90 100 Lifetime vs Tc 50 55 60 65 70 75 80 85 90 Case Temperature(℃) PAIRUI ELECTRONICS www.pairuigroup.com Updated 2017-V1.0-0111 Page:7/10 led power supplies PRODUCT SPECIFICATION Dimming Function 0-10V Dimming & PWM Dimming Non-dim-to-off 100% Io/Ir 80% 60% 40% 20% 0% 0 1 3 5 7 9 2 4 6 8 10 0% 10% 20% 30% 40% 50% 60% 70% 80% 90% 100% Vdim PWM Duty Dim-to-off 100% Io/Ir 80% 60% 40% 20% 0% 0.8 0 1 3 5 7 9 2 4 6 8 10 0% 10% 20% 30% 40% 50% 60% 70% 80% 90% 100% GND Gery Vdim PWM Duty Input Source Current Dimming wire 0-10V & PWM Purple 10V AUX Source Current 10V AUX Yellow PWM Frequency Range Input Dimming Voltage 0-10V PWM High Level 0-10mA 20mA 0.5~3KHz 10V NOTE: 1. Io is actual output current, and Ir is rated current without dimming control; 2. For the driver to operate properly, the load voltage must be in the working voltage range; 3. The driver has dim-to-off option that can be programmed by the NFC controller; 4. Maximum input voltage at dimming wire is 12V; 5. AUX wire is only for source, it cannot connect to other voltage source. PAIRUI ELECTRONICS www.pairuigroup.com Updated 2017-V1.0-0111 Page:8/10 led power supplies PRODUCT SPECIFICATION Dimming Function Timer Dimming I(mA) I2 I1 t1 t2 t(h) NOTE: 1. The dimming time can be programmed by the NFC controller; 2. The time of t1 and t2 can be set by the NFC controller; 3. The value of I1 and I2 can be set by the NFC controller; 4. Current changes from I1 to I2 need a few minutes. PAIRUI ELECTRONICS www.pairuigroup.com Updated 2017-V1.0-0111 Page:9/10 led power supplies PRODUCT SPECIFICATION NFC Controller Display: 1. Driver Type 2. Current Set 3. Voltage Set 4. Transmit 5. Time 1 Set 6. Time 1 Current 7. Time 2 Set 8. Time 2 Current 9. Dim to Off OK and confirm OK Return and back Select and Setting NFC CONTROLLER Note: 1. The NFC controller can modulate the output current and output voltage; 2. The NFC dimming is a way of non-contact process, so it’s much safer than the traditional ones; 3. Power devices can be programmed without driver power-on. PAIRUI ELECTRONICS www.pairuigroup.com Updated 2017-V1.0-0111 Page:10/10 led power supplies PRODUCT SPECIFICATION Update Record Date Version Updated Content 2017/01/11 2017-V1.0-0111 File created Updated By Approved By