3.2x1.6mm SMD CHIP LED LAMP Part Number: AP3216SURCK Features Description z3.2mmx1.6mm zLOW SMT LED, 1.1mm THICKNESS. POWER CONSUMPTION. zWIDE zIDEAL The Hyper Red source color devices are made with DH InGaAlP on GaAs substrate Light Emitting Diode. VIEWING ANGLE. FOR BACKLIGHT AND INDICATOR. zVARIOUS COLORS AND LENS TYPES AVAILABLE. zPACKAGE : 2000PCS / REEL. zMOISTURE zRoHS HYPER RED SENSITIVITY LEVEL : LEVEL 3. COMPLIANT. Package Dimensions Notes: 1. All dimensions are in millimeters (inches). 2. Tolerance is ±0.2(0.008") unless otherwise noted. 3. Specifications are subject to change without notice. SPEC NO: DSAD0981 REV NO: V.5 DATE: SEP/12/2006 PAGE: 1 OF 5 APPROVED: J. Lu CHECKED: Allen Liu DRAWN: S.J.LIU ERP: 1203000423 Selection Guide Dice Part No. AP3216SURCK Iv (mcd) [2] @ 20mA Lens Type HYPER RED (InGaAlP) WATER CLEAR Viewing Angle [1] Min. Typ. 2 θ 1/2 50 150 120° Notes: 1. θ1/2 is the angle from optical centerline where the luminous intensity is 1/2 the optical centerline value. 2. Luminous intensity/ luminous Flux: +/-15%. Electrical / Optical Characteristics at TA=25°C Symbol Parameter Device λpeak Peak Wavelength Hyper Red λD [1] Dominant Wavelength Δλ1/2 Typ. Max. Units Test Conditions 650 nm IF=20mA Hyper Red 635 nm IF=20mA Spectral Line Half-width Hyper Red 28 nm IF=20mA C Capacitance Hyper Red 35 pF VF=0V;f=1MHz VF[2] Forward Voltage Hyper Red 1.95 2.5 V IF=20mA IR Reverse Current Hyper Red 10 uA VR = 5V Notes: 1.Wavelength: +/-1nm. 2. Forward Voltage: +/-0.1V. Absolute Maximum Ratings at TA=25°C Parameter Hyper Red Units Power dissipation 170 mW DC Forward Current 30 mA Peak Forward Current [1] 185 mA 5 V Reverse Voltage Operating/Storage Temperature -40°C To +85°C Note: 1. 1/10 Duty Cycle, 0.1ms Pulse Width. SPEC NO: DSAD0981 REV NO: V.5 DATE: SEP/12/2006 PAGE: 2 OF 5 APPROVED: J. Lu CHECKED: Allen Liu DRAWN: S.J.LIU ERP: 1203000423 Hyper Red AP3216SURCK SPEC NO: DSAD0981 REV NO: V.5 DATE: SEP/12/2006 PAGE: 3 OF 5 APPROVED: J. Lu CHECKED: Allen Liu DRAWN: S.J.LIU ERP: 1203000423 AP3216SURCK Recommended Soldering Pattern (Units : mm; Tolerance: ±0.1) Tape Specifications (Units : mm) SPEC NO: DSAD0981 REV NO: V.5 DATE: SEP/12/2006 PAGE: 4 OF 5 APPROVED: J. Lu CHECKED: Allen Liu DRAWN: S.J.LIU ERP: 1203000423 PACKING & LABEL SPECIFICATIONS AP3216SURCK SPEC NO: DSAD0981 REV NO: V.5 DATE: SEP/12/2006 PAGE: 5 OF 5 APPROVED: J. Lu CHECKED: Allen Liu DRAWN: S.J.LIU ERP: 1203000423