Philips Semiconductors Product specification Rectifier diodes fast, soft-recovery GENERAL DESCRIPTION Glass-passivated double diffused rectifier diodes in a full pack plastic envelope featuring low forward voltage drop, fast reverse recovery and soft recovery characteristic. The devices are intended for use in TV receivers, monitors and switched mode power supplies. BY329X series QUICK REFERENCE DATA SYMBOL VRRM IF(AV) IFSM trr PINNING - SOD113 PIN PARAMETER MAX. MAX. MAX. BY329X Repetitive peak reverse voltage Average forward current Non-repetitive peak forward current Reverse recovery time -800 800 PIN CONFIGURATION -1000 -1200 1000 1200 UNIT V 8 65 8 65 8 65 A A 145 145 145 ns SYMBOL DESCRIPTION case 1 cathode 2 anode k 1 a 2 case isolated 1 2 LIMITING VALUES Limiting values in accordance with the Absolute Maximum System (IEC 134). SYMBOL PARAMETER VRSM VRRM VRWM Non-repetitive peak reverse voltage Repetitive peak reverse voltage Crest working reverse voltage IF(AV) Average forward current1 IF(RMS) IFRM IFSM I2t Tstg Tj CONDITIONS square wave; δ = 0.5; Ths ≤ 83 ˚C sinusoidal; a = 1.57; Ths ≤ 90 ˚C RMS forward current Repetitive peak forward current t = 25 µs; δ = 0.5; Ths ≤ 83 ˚C Non-repetitive peak forward t = 10 ms current. t = 8.3 ms sinusoidal; Tj = 150 ˚C prior to surge; with reapplied VRWM(max) I2t for fusing t = 10 ms Storage temperature Operating junction temperature MIN. MAX. UNIT - -800 800 -1000 -1200 1000 1200 V - 800 600 1000 800 V V 1200 1000 - 8 A - 7 A - 11 16 A A - 65 71 A A -40 - 28 150 150 A2s ˚C ˚C 1 Neglecting switching and reverse current losses. May 1995 1 Rev 1.000 Philips Semiconductors Product specification Rectifier diodes fast, soft-recovery BY329X series ISOLATION LIMITING VALUE & CHARACTERISTIC Ths = 25 ˚C unless otherwise specified SYMBOL PARAMETER CONDITIONS Visol R.M.S. isolation voltage from both terminals to external heatsink f = 50-60 Hz; sinusoidal waveform; R.H. ≤ 65% ; clean and dustfree Cisol Capacitance from both terminals f = 1 MHz to external heatsink MIN. TYP. - MAX. UNIT 2500 V - 10 - pF MIN. TYP. MAX. UNIT - 55 4.8 5.9 - K/W K/W K/W MIN. TYP. MAX. UNIT - 1.5 0.1 1.85 1.0 V mA MIN. TYP. MAX. UNIT - 125 0.5 50 145 0.7 60 ns µC A/µs THERMAL RESISTANCES SYMBOL PARAMETER CONDITIONS Rth j-hs Thermal resistance junction to heatsink Thermal resistance junction to ambient with heatsink compound without heatsink compound in free air. Rth j-a STATIC CHARACTERISTICS Tj = 25 ˚C unless otherwise stated SYMBOL PARAMETER CONDITIONS VF IR Forward voltage Reverse current IF = 20 A VR = VRWM; Tj = 125 ˚C DYNAMIC CHARACTERISTICS Tj = 25 ˚C unless otherwise stated SYMBOL PARAMETER CONDITIONS trr Qs dIR/dt Reverse recovery time Reverse recovery charge Maximum slope of the reverse recovery current IF = 1 A; VR > 30 V; -dIF/dt = 50 A/µs IF = 2 A; VR > 30 V; -dIF/dt = 20 A/µs IF = 2 A; -dIF/dt = 20 A/µs May 1995 2 Rev 1.000 Philips Semiconductors Product specification Rectifier diodes fast, soft-recovery I dI F BY329X series 100 F IFS (RMS) / A BY329 90 dt 80 IFSM 70 trr 60 time 50 40 Qs I 30 100% 25% 20 10 I R 0 1ms rrm Fig.1. Definition of trr, Qs and Irrm 20 30 54 15 10s BY229F Tj = 150 C Tj = 25 C 78 0.5 20 0.2 10 1s IF / A D = 1.0 Vo = 1.25 V Rs = 0.03 Ohms 0.1s tp / s Fig.4. Maximum non-repetitive rms forward current. IF = f(tp); sinusoidal current waveform; Tj = 150˚C prior to surge with reapplied VRWM. Ths(max) / C BY329 PF / W 10ms 102 0.1 tp I D= 5 tp T 2 4 6 IF(AV) / A 8 typ 10 150 12 0 0 Fig.2. Maximum forward dissipation, PF = f(IF(AV)); square wave current waveform; parameter D = duty cycle = tp/T. 15 Ths(max) / C BY329 PF / W Vo = 1.25 V 0.5 1 VF / V 10 78 2.2 2 BY329 Qs / uC Tj = 150 C Tj = 25 C IF = 10 A 1.9 10 1.5 Fig.5. Typical and maximum forward characteristic; IF = f(VF); parameter Tj a = 1.57 Rs = 0.03 Ohms max t T 0 0 10 126 10 A 102 2A 2.8 4 1A 2A 1 1A 126 5 0 0 2 4 IF(AV) / A 6 0.1 150 8 1 Fig.3. Maximum forward dissipation, PF = f(IF(AV)); sinusoidal current waveform; parameter a = form factor = IF(RMS)/IF(AV). May 1995 10 -dIF/dt (A/us) 100 Fig.6. Maximum Qs at Tj = 25˚C and 150˚C 3 Rev 1.000 Philips Semiconductors Product specification Rectifier diodes fast, soft-recovery BY329X series BY329 trr / ns 1000 10 Zth j-hs / (K/W) IF = 10 A 10A 1 1A 1A 100 0.1 PD tp Tj = 150 C Tj = 25 C t 10 1 10 -dIF/dt (A/us) 0.01 10us 100 Fig.7. Maximum trr measured to 25% of Irrm; Tj = 25˚C and 150˚C 100 100us 1ms 10ms tp / s 0.1s 1s 10s Fig.9. Transient thermal impedance Zth = f(tp) BY329 Cd / pF 10 1 1 10 VR / V 100 1000 Fig.8. Typical junction capacitance Cd at f = 1 MHz; Tj = 25˚C May 1995 4 Rev 1.000 Philips Semiconductors Product specification Rectifier diodes fast, soft-recovery BY329X series MECHANICAL DATA Dimensions in mm 10.3 max 4.6 max Net Mass: 2 g 3.2 3.0 2.9 max 2.8 Recesses (2x) 2.5 0.8 max. depth 6.4 15.8 19 max. max. 15.8 max seating plane 3 max. not tinned 3 2.5 13.5 min. 1 0.4 2 M 1.0 (2x) 0.6 2.54 0.9 0.7 0.5 2.5 5.08 Fig.10. SOD113; The seating plane is electrically isolated from all terminals. Notes 1. Refer to mounting instructions for F-pack envelopes. 2. Epoxy meets UL94 V0 at 1/8". May 1995 5 Rev 1.000 Philips Semiconductors Product specification Rectifier diodes fast, soft-recovery BY329X series DEFINITIONS Data sheet status Objective specification This data sheet contains target or goal specifications for product development. Preliminary specification This data sheet contains preliminary data; supplementary data may be published later. Product specification This data sheet contains final product specifications. Limiting values Limiting values are given in accordance with the Absolute Maximum Rating System (IEC 134). Stress above one or more of the limiting values may cause permanent damage to the device. These are stress ratings only and operation of the device at these or at any other conditions above those given in the Characteristics sections of this specification is not implied. Exposure to limiting values for extended periods may affect device reliability. Application information Where application information is given, it is advisory and does not form part of the specification. Philips Electronics N.V. 1996 All rights are reserved. Reproduction in whole or in part is prohibited without the prior written consent of the copyright owner. The information presented in this document does not form part of any quotation or contract, it is believed to be accurate and reliable and may be changed without notice. No liability will be accepted by the publisher for any consequence of its use. Publication thereof does not convey nor imply any license under patent or other industrial or intellectual property rights. LIFE SUPPORT APPLICATIONS These products are not designed for use in life support appliances, devices or systems where malfunction of these products can be reasonably expected to result in personal injury. Philips customers using or selling these products for use in such applications do so at their own risk and agree to fully indemnify Philips for any damages resulting from such improper use or sale. May 1995 6 Rev 1.000