Technical Data Sheet for NL1010T Single-Stage Thermoelectric Module NOMINAL PERFORMANCE IN NITROGEN Hot Side Temperature (°C) Δ Tmax (°C): Qmax (watts): Imax (amps): Vmax (vdc): AC Resistance (ohms): PRODUCT FEATURES • • • • 27 61 0.47 1.0 0.8 0.75 50 67 0.53 1.0 1.0 -- ORDERING OPTIONS RoHS EU Compliant Ceramic Material: Aluminum Oxide -01 and -02: External Metallization is Au flash, suitable for soldering. Maximum process temperature is 220°C. Model Number NL1010T-01 NL1010T-02 NL1010T-03 Description Both Surfaces are Metallized Hot Side Exterior is Metallized No Metallization OPERATION CAUTIONS INSTALLATION For maximum reliability, storage and operation below 130°C in a non-condensing environment is recommended. To minimize thermal stress, use linear/proportional temperature control or a similar method rather than an ON/OFF method. Recommended mounting methods: Bonding with thermal epoxy or soldering with metallized ceramics. For additional information, please refer to our TEC Installation Guide. II-VI Marlow – Dallas, TX USA 214-340-4900 877-627-5691 [email protected] Marlow Industries Europe GmbH - Germany +49 (0) 6150 5439 - 403 [email protected] II-VI Japan Inc. 81 43 297 2693 (tel) [email protected] www.ii-vi.co.jp MI Form 005-0808 Rev. A www.marlow.com II-VI Singapore Pte., Ltd. (65) 6481 8215 (tel) [email protected] Marlow Industries China, II-VI Technologies Beijing 86-10-643 98226 [email protected] DOC # 102-0289 REV G - PAGE 1 OF 2 Hot Side Temperature 50°C Hot Side Temperature 27°C 80.0 20.0 0.0 T (C) 0.0 0.6 0.4 0.0 0.0 Q=0 T=0 0.2 0.4 0.6 0.8 1.0 CURRENT (AMPS) 40.0 20.0 0.8 0.2 0.00 0.05 0.10 0.15 0.20 0.25 0.30 0.35 0.40 0.45 60.0 VOLTAGE (VDC) T (C) 40.0 HEAT LOAD (WATTS) 80.0 HEAT LOAD (WATTS) 0.00 0.05 0.10 0.15 0.20 0.25 0.30 0.35 0.40 0.45 60.0 VOLTAGE (VDC) TYPICAL PERFORMANCE CURVES ENVIRONMENT: ONE ATMOSPHERE DRY NITROGEN 0.8 0.6 0.4 0.0 0.0 1.2 Q=0 T=0 0.2 0.2 0.4 0.6 0.8 1.0 CURRENT (AMPS) 1.2 MECHANICAL CHARACTERISTICS For performance information in a vacuum or with hot side temperatures other than 27°C or 50°C, contact one of our Applications Engineers at 877-627-5691. Positive Lead .156 [3.96] Leads: 28 AWG (0.32) Bus Solid Tinned Copper Negative Lead 2.00 +/-.25 [50.80+/-6.35] .156 [3.96] .003 [0.08] Cold Side A .001 [0.03] .095 +/-.005 [2.40 +/-0.13] .001 [0.03] A Dimensions are in inches, and millimeters are in [ ]. For customer support or general questions please contact a local office or visit our website at www.marlow.com. MI Form 005-0808 Rev. A www.marlow.com DOC # 102-0289 REV G - PAGE 2 OF 2