LITEON LTP-3784JD-01 Led display Datasheet

LED Display
Product Data Sheet
LTP-3784JD-01
Spec No.: DS30-2002-086
Effective Date: 04/03/2002
Revision: -
LITE-ON DCC
RELEASE
BNS-OD-FC001/A4
LITE-ON Technology Corp. / Optoelectronics
No.90,Chien 1 Road, Chung Ho, New Taipei City 23585, Taiwan, R.O.C.
Tel: 886-2-2222-6181 Fax: 886-2-2221-1948 / 886-2-2221-0660
http://www.liteon.com/opto
LITE-ON ELECTRONICS, INC.
Property of Lite-On Only
FEATURES
*0.54 INCH (13.8 mm) DIGIT HEIGHT.
*CONTINUOUS UNIFORM SEGMENTS
*LOW POWER REQUIREMENT.
*EXCELLENT CHARACTERS APPEARANCE.
*HIGH BRIGHTNESS & HIGH CONTRAST.
*WIDE VIEWING ANGLE.
*SOLID STATE RELIABILITY.
*CATEGORIZED FOR LUMINOUS INTENSITY.
DESCRIPTION
The LTP-3784JD-01 is a 0.54 inch (13.8 mm) digit height dual digit
14-segment alphanumeric display. This device utilizes AlInGaP Hyper
red LED chips, which are made from AlInGaP on a non-transparent
GaAs substrate, and has a light gray face and white segments.
DEVICE
PART NO.
AlInGaP Hyper red
LTP-3784WC-01
PART NO.: LTP-3784JD-01
BNS-OD-C131/A4
DESCRIPTION
Duplex Common Cathode
Rt. Hand Decimal
PAGE:
1 of 5
LITE-ON ELECTRONICS, INC.
Property of Lite-On Only
PACKAGE DIMENSIONS
NOTES: All dimensions are in millimeters. Tolerances are  0.25-mm (0.01“) unless otherwise noted.
INTERNAL CIRCUIT DIAGRAM
PART NO.: LTP-3784JD-01
BNS-OD-C131/A4
PAGE:
2 of 5
LITE-ON ELECTRONICS, INC.
Property of Lite-On Only
PIN CONNECTION
No.
CONNECTION
1
ANODE E
2
ANODE M
3
NO CONNECTION
4
ANODE L
5
ANODE K
6
ANODE J
7
ANODE D
8
ANODE D.P.
9
ANODE C
10
ANODE B
11
COMMON CATHODE , CHARACTER 2
12
ANODE A
13
ANODE N
14
ANODE H
15
ANODE G
16
COMMON CATHODE , CHARACTER 1
17
ANODE P
18
ANODE F
PART NO.: LTP-3784JD-01
BNS-OD-C131/A4
PAGE:
3 of 5
LITE-ON ELECTRONICS, INC.
Property of Lite-On Only
ABSOLUTE MAXIMUM RATING AT Ta=25oC
PARAMETER
MAXIMUM RATING
UNIT
Power Dissipation Per Segment
70
mW
Peak Forward Current Per Segment
(1/10 Duty Cycle, 1.0ms Pulse Width)
90
mA
25
0.33
mA
mA/0C
Continuous Forward Current Per Segment
Derating Linear From 250C Per Segment
Reverse Voltage Per Segment
5
V
0
Operating Temperature Range
0
-35 C to +85 C
Storage Temperature Range
-350C to +850C
Solder Temperature: max 260℃ for max 3sec at 1.6mm[1/16inch] below seating plane.
ELECTRICAL / OPTICAL CHARACTERISTICS AT Ta=25oC
PARAMETER
SYMBOL MIN. TYP. MAX. UNIT TEST CONDITION
520
cd
IF=1mA
p
650
nm
IF=20mA
Spectral Line Half-Width

20
nm
IF=20mA
Dominant Wavelength
d
639
nm
IF=20mA
Forward Voltage Per Segment
VF
2.1
2.6
V
IF=20mA
Reverse Current Per Segment
IR
100
A
VR=5V
IV-m
2:1
Average Luminous Intensity
IV
Peak Emission Wavelength
Luminous Intensity Matching Ratio
200
IF=10mA
Note: Luminous intensity is measured with a light sensor and filter combination that
approximates the CIE (Commision Internationale De L’Eclairage) eye-response curve.
PART NO.: LTP-3784JD-01
BNS-OD-C131/A4
PAGE:
4 of 5
LITE-ON ELECTRONICS, INC.
Property of Lite-On Only
TYPICAL ELECTRICAL / OPTICAL CHARACTERISTIC CURVES
(25oC Ambient Temperature Unless Otherwise Noted)
PART NO.: LTP-3784JD-01
BNS-OD-C131/A4
PAGE:
5 of 5
Similar pages