IS/ISO 9002 Lic# QSC/L- 000019.2 Continental Device India Limited An IS/ISO 9002 and IECQ Certified Manufacturer NPN SILICON HILGH VOLTAGE VIDEO TRANSISTORS BF391 BF392 BF393 TO-92 Plastic Package Designed For High Voltage Video Amplifier in Television Receivers. ABSOLUTE MAXIMUM RATINGS(Ta=25ºC unless specified otherwise) DESCRIPTION SYMBOL VCEO Collector Emitter Voltage 391 200 392 250 393 300 UNITS V Collector Base Voltage VCBO 200 250 300 V Emitter Base Voltage VEBO 6 6 6 V Collector Current Continuous IC 500 mA Power Dissipation@ Ta=25ºC PD 625 mW Power Dissipation@ Tc=25ºC PD 1.5 W Tj, Tstg -55 to +150 ºC THERMAL RESISTANCE Junction to ambient Rth(j-a) 200 ºC/W Junction to case Rth(j-c) 83.3 ºC/W Operating And Storage Junction Temperature Range ELECTRICAL CHARACTERISTICS (Ta=25ºC Unless Otherwise Specified) DESCRIPTION SYMBOL TEST CONDITION 391 392 393 UNITS Collector Emitter Voltage VCEO* IC=1.0mA,IB=0 >200 >250 >300 V Collector Base Voltage VCBO IC=100µA.IE=0 >200 >250 >300 V Emitter Base Voltage VEBO >6 >6 Collector Cut off Current IE=100µA, IC=0 VCB=160V,IE=0 >6 ICBO V µA <0.1 <0.1 µA <0.1 VCB=200V,IE=0 Emitter Cut off Current IEBO VEB=4.0V, IC = 0 VEB=6.0V, IC = 0 DC Current Gain Continental Device India Limited hFE µA <0.1 <0.1 <0.1 IC=1.0mA,VCE=10V >25 >25 >25 IC=10mA,VCE=10V >40 >40 >40 Data Sheet µA Page 1 of 4 NPN SILICON HILGH VOLTAGE VIDEO TRANSISTORS BF391 BF392 BF393 TO-92 Plastic Package ELECTRICAL CHARACTERISTICS (Ta=25ºC Unless Specified Otherwise) DESCRIPTION SYMBOL TEST CONDITION 391 392 393 UNITS Collector Emitter Saturation Voltage VCE(sat) IC=20mA,IB=2mA <2 <2 <2 V Base Emitter Saturation Voltage VBE(sat) IC=20mA,IB=2mA <2 <2 <2 V IE=0, VCB=60V, f=1.0MHZ <2 <2 <2 pF >50 >50 >50 MHz Feedback Capacitance Cre Ic=10mA, VCE=20V, f=20MHZ *Pulse Condition: = Pulse Width < 300us, Duty Cycle < 2%. Current Gain - Bandwidth Product Continental Device India Limited fT Data Sheet Page 2 of 4 BF391 BF392 BF393 TO-92 Plastic Package TO-92 Plastic Package B Ammo Pack Style Uncontrolled MECHANICAL DATA h P T h (p) A1 LABEL H1 Carrier Strip FLAT SIDE 183 mm A A W2 H0 L Wo W1 W 331m m t1 F1 t 1 F2 F 4 mm2 Do P2 Po K 2 D 3 D A A C 3 2 1 H F F ITEM 3 2 1 SEC AA G PIN CONFIGURATION 1. COLLECTOR 2. BASE 3. EMITTER Flat Side of Transistor and Adhesive Tape Visible 2000 pcs./Ammo Pack All dimensions in mm unless specified otherwise E Beyond 'L' Solderability Ensured D FEE Adhesive Tape on Top Side L Dimension With 'L' TO-92 Transistors on Tape and Ammo Pack DIM MIN. MAX. A B C D 4.32 4.45 3.18 0.41 5.33 5.20 4.19 0.55 E F G H 0.35 0.50 5 DEG 1.14 1.40 1.14 1.53 K L 12.70 1.982 All diminsions in mm. — 2.082 SYMBOL BODY WIDTH BODY HEIGHT BODY THICKNESS PITCH OF COMPONENT FEED HOLE PITCH A1 A T P Po FEED HOLE CENTRE TO COMPONENT CENTRE P2 DISTANCE BETWEEN OUTER LEADS COMPONENT ALIGNMENT TAPE WIDTH HOLD-DOWN TAPE WIDTH HOLE POSITION F h W Wo W1 HOLD-DOWN TAPE POSITION LEAD WIRE CLINCH HEIGHT COMPONENT HEIGHT LENGTH OF SNIPPED LEADS FEED HOLE DIAMETER TOTAL TAPE THICKNESS LEAD - TO - LEAD DISTANCEF1, W2 Ho H1 L Do t F2 CLINCH HEIGHT PULL - OUT FORCE H2 (P) SPECIFICATION REMARKS MIN. NOM. MAX. TOL . 4.8 4.0 5.2 4.8 4.2 3.9 12.7 ±1 12.7 ±0.3 CUMULATIVE PITCH ERROR 1.0 mm/20 PITCH 6.35 ±0.4 TO BE MEASURED AT BOTTOM OF CLINCH +0.6 5.08 -0.2 0 1 AT TOP OF BODY 18 ±0.5 6 ±0.2 9 +0.7 -0.5 0.5 ±0.2 16 ±0.5 23.25 11.0 4 ±0.2 1.2 t1 0.3 - 0.6 2.54 +0.4 -0.1 3 6N NOTES 1. MAXIMUM ALIGNMENT DEVIATION BETWEEN LEADS NOT TO BE GREATER THAN 0.2 mm. 2. MAXIMUM NON-CUMULATIVE VARIATION BETWEEN TAPE FEED HOLES SHALL NOT EXCEED 1 mm IN 20 PITCHES. 3. HOLDDOWN TAPE NOT TO EXCEED BEYOND THE EDGE(S) OF CARRIER TAPE AND THERE SHALL BE NO EXPOSURE OF ADHESIVE. 4. NO MORE THAN 3 CONSECUTIVE MISSING COMPONENTS ARE PERMITTED. 5. A TAPE TRAILER, HAVING AT LEAST THREE FEED HOLES ARE REQUIRED AFTER THE LAST COMPONENT. 6. SPLICES SHALL NOT INTERFERE WITH THE SPROCKET FEED HOLES. Packing Detail PACKAGE TO-92 Bulk TO-92 T&A STANDARD PACK Details Net Weight/Qty 1K/polybag 200 gm/1K pcs 2K/ammo box 645 gm/2K pcs Continental Device India Limited INNER CARTON BOX Size Qty 3" x 7.5" x 7.5" 5K 12.5" x 8" x 1.8" 2K Data Sheet OUTER CARTON BOX Size Qty Gr Wt 17" x 15" x 13.5" 80K 23 kgs 17" x 15" x 13.5" 32K 12.5 kgs Page 3 of 4 Notes BF391 BF392 BF393 TO-92 Plastic Package Disclaimer The product information and the selection guides facilitate selection of the CDIL's Discrete Semiconductor Device(s) best suited for application in your product(s) as per your requirement. It is recommended that you completely review our Data Sheet(s) so as to confirm that the Device(s) meet functionality parameters for your application. The information furnished in the Data Sheet and on the CDIL Web Site/CD is believed to be accurate and reliable. CDIL however, does not assume responsibility for inaccuracies or incomplete information. Furthermore, CDIL does not assume liability whatsoever, arising out of the application or use of any CDIL product; neither does it convey any license under its patent rights nor rights of others. These products are not designed for use in life saving/support appliances or systems. CDIL customers selling these products (either as individual Discrete Semiconductor Devices or incorporated in their end products), in any life saving/support appliances or systems or applications do so at their own risk and CDIL will not be responsible for any damages resulting from such sale(s). CDIL strives for continuous improvement and reserves the right to change the specifications of its products without prior notice. CDIL is a registered Trademark of Continental Device India Limited C-120 Naraina Industrial Area, New Delhi 110 028, India. Telephone + 91-11-579 6150 Fax + 91-11-579 9569, 579 5290 www.cdil.com e-mail [email protected] Continental Device India Limited Data Sheet Page 4 of 4