LMBR120LFT1G Thru LMBR160LFT1G Schottky Barrier Rectifiers Reverse Voltage 20 to 60V Forward Current 1.0A FEATURES * Plastic package has Underwriters Laboratory Flammability Classification 94V-0 * Low power loss,high efficiency * For use in low voltage high frequency inverters, free wheeling,and polarity protection applications * Guardring for over voltage protection * High temperature soldering guaranteed: 260°C/10 seconds at terminals Mechanical Data Case: SOD123-FL/MINI SMA molded plastic over sky die Terminals: Tin Plated, solderable per MIL-STD-750, Method 2026 Polarity: Color band denotes cathode end Mounting Position: Any Weight: 0.0155 g Handling precautin:None We declare that the material of product is Haloggen free (green epoxy compound) 1.Electrical Characteristic Maximum & Thermal Characteristics Ratings Parameter Symbol symbol device marking code at 25°C ambient temperature unless otherwise specified. LMBR120LFT1G LMBR140LFT1G LMBR160LFT1G 12L 14L 16L Unit Maximum repetitive peak reverse voltage VRRM 20 40 60 V Maximum RMS voltage VRMS 14 28 42 V Maximum DC blocking voltage VDC 20 40 60 V Maximum average forward rectified current at TC= 75°C IF(AV) 1.0 A Peak forward surge current 8.3ms single half sine-wave superimposed on rated load (JEDEC Method) IFSM 30 A RθJA 110 40 °C/W Typical thermal resistance (Note 1) Operating junction temperature range storage temperature range RθJC TJ –55 to +125 –55 to +150 °C –65 to +150 TSTG °C Electrical Characteristics Ratings at 25°C ambient temperature unless otherwise specified. Parameter Symbol symbol LMBR120LFT1G LMBR140LFT1G LMBR160LFT1G Unit Maximum instantaneous forward voltage at(IF = 0.4 A, TJ = 25°C) (IF = 1.0 A, TJ = 25°C) VF 0.34 0.45 0.5 0.58 V Maximum DC reverse current at rated DC blocking voltage TA = 25°C Tj = 125°C IR 0.10 10 Typical junction capacitance at 4.0V, 1MHz CJ NOTES: 1. 8.0mm2 (.013mm thick) land areas 0.03 10 160 mA PF LMBR120LFT1G Thru LMBR160LFT1G 2.Ratings and Characteristic Curves ( TA = 25°C unless otherwise noted ) Fig. 2 – Maximum Non-repetitive Peak Forward Surge Current 60 Hz Resistive or Inductive Load 1.0 Peak forward surge current (A) Average Forward Rectified Current (A) Fig. 1 – Forward Current Derating Curve 0.5 30 15 0 0 100 25 50 75 100 125 150 175 CASE TEMPERATURE:Tc(°C) Fig 3. – Typical Instantaneous Forward Characteristics 10 1.0 TJ = 25°C Pulse width = 300µs 1% Duty Cycle 0.1 0.01 0.2 10 Tj=125 1 0.1 0.01 0.4 0.6 0.8 1.0 1.2 Instantaneous Forward Voltage (V) Fig 5. –typical transient thermal impedance 10 Number of Cycles at 60Hz Fig 4. – Typical Reverse Characteristics Tj=25℃ 0.001 0 20 40 60 80 Percent of Rated Peak Reverse Voltage (%) Fig 6. – Typical Junction Capacitance 1000 Junction Capacitance (pF) 100 1 Instantaneous Reverse Current (mA) Instantaneous Forward Current (A) 0 Transient thermal impedance(°C/W) TJ = TJ max 8.3ms Single Half Sine-wave (JEDEC Method) 10 1.0 0.1 TJ = 25°C f = 1.0 MHz Vsig = 50mVp p 100 10 0.01 0.1 1.0 10 t,Pulse duration,sec 100 0.1 1 Reverse Voltage (V) 10 LMBR120LFT1G Thru LMBR160LFT1G 3. dimension: SOD123-FL MILLIMETERS MIN MAX 3.5 3.9 0.75 0.95 2.6 3.0 1.6 2.0 0.45Typ 0.9 1.2 0.12 0.22 0.8Typ DIM A B C D E H J K INCHES MIN MAX 0.138 0.159 0.029 0.037 0.103 0.119 0.063 0.079 0.018Typ 0.036 0.047 0.005 0.009 0.032Typ Suggested solder pad layout B C A Dimensions in inches and (millimeters) PACKAGE A B C SOD123-FL 0.044(1.10 0.040(1.00) 0.079(2.00) LMBR120LFT1G Thru LMBR160LFT1G Reel packing INNER BOX REEL DIA. CARTON SIZE CARTON (mm) (mm) (mm) (PCS) 183*183*123 178 382*262*387 240,000 5.Suggested thermal profile for soldering process 1. Storage environment：Temperature=5~40℃ Humidity=55±25% 2. Reflow soldering of surface-mount device 3. Reflow soldering Profile Feature Soldering Condition Average ramp-up rate(TL to TP) <3℃/sec Preheat - Temperature Min(Tsmin) 150℃ - Temperature Max(Tsmax) 200℃ - Time(min to max)(t s ) 60~120sec Tsmax to TL - Ramp-up Rate <3sec Time maintained above: - Temperature (TL) - Time(t L) Peak Temperature(TP) Time within 5℃ of actual Peak Temperature(TP) 217℃ 60-260sec 255 -0/+5℃ 10~30sec Ramp-down Rate <6℃/sec Time 25℃ to Peak Temperature <6minutes APPOX. GROSS WEIGHT (kg) 8.7 LMBR120LFT1G Thru LMBR160LFT1G 6.High reliability test capabilities Item Test Solder Resistance Condition at 260±5℃ for 10±2sec immerse body into solder 1/16" ± 1/32" Reference MIL-STD-750D METHOD-2031 Solderability at 245±5℃ for 5 sec MIL-STD-202F METHOD-208 High Temperature Reverse Bias VR=80% rate at T j=150℃ for 168hrs MIL-STD-750D METHOD-1038 Forward Operation Life Rated average rectifier current TA=25℃ for 500hrs MIL-STD-750D METHOD-1027 Intermittent Operation Life TA=25℃，IF=IO On state:power on for 5 min. Off state:power off for 5 min. on and off for 500 cycles MIL-STD-750D METHOD-1036 Pressure Cooker 15PSIG at TA=121℃ for 4hrs JESD22-A102 Temperature Cycling -55℃ to +125℃ dwelled for 30 min. and transferred for 5min. Total 10 cycles MIL-STD-750D METHOD-1051 Thermal Shock 0℃ for 5min. Rise to 100℃ for 5min. Total 10 cycles MIL-STD-750D METHOD-1056 Forward Surge 8.3ms single half sine-wave superimposed on rated load,one surge MIL-STD-750D METHOD-4066-2 Humidity at TA=85℃，RH=85% for 1000hrs MIL-STD-750D METHOD-1021 High Temperature Storage Life at 175℃ for 1000hrs MIL-STD-750D METHOD-1031 Title : DOC NO.： Power Diode SMD Package Pa cking Spec Version: 5 WI-258 Modification: 0 Page: 2 5.1 、SMD Packing Reel Spec & Packing Quantity 5.1.1 Reel Packing A. Reel Spec unit：mm SPEC SMA-FL 7" reel TO277 13" reel SOD123FL 7" reel SOD323HE 7" reel SMB-FL 13" reel A 177.0±2.0 330.0±2.0 177.0±2.0 177.0±2.0 330.0±2.0 B. 13" reel packing box B 54.0±0.5 75.0±0.5 50.0±0.5 50.0±0.5 75.0±0.5 C 13.0±0.5 13.0±0.5 13.0±0.5 13.0±0.5 13.0±0.5 W 13.2±0.2 13.2±0.2 9.4±1.5 9.4±1.5 13.2±0.2 Quantity/Reel 3K 5K 3K 3K 5K unit：mm A 335±5.0 size B 335±2.0 as per above packing Spec TO277 13" reel SMB-FL 13" reel Q'ty/Box 10K 10K C 40±1.0 Title : Power Diode SMD Package Packing Spec DOC NO.： WI-258 DOC NO.： WI-258 Page: 3 C. 7" reel packing box unit：mm SMA-FL SOD123FL SOD323HE A B C 186±2.0 139±2.0 185±2.0 as per above packing Q'ty/Box SMA-FL 30K SOD123FL 30K SOD323HE 30K D. reel packing carton unit：mm A 350±2.0 size B 340±2.0 C 350±2.0 as per above packing Spec TO277 13" reel SMB-FL 13" reel Q'ty/Carton 80K 80K unit：mm SMA-FL SOD123FL SOD323HE A B C 455±2.0 400±2.0 410±2.0 as per above packing Spec SMA-FL 7" reel SOD123-FL 7" reel SOD323HE 7" reel 5.1.2 Tape Spec A. Cover Tape unit：mm A SMA-FL SMB-FL TO277 B 9.5±0.10 SOD123FL 5.4±0.10 SOD323HE 0.062±0.007 Q'ty/Carton 360K 360K 360K Title : DOC NO.： Power Diode SMD Package Packing Spec Version: 5 WI-258 Modification: 0 Page: 4 B. Carrier Tape Do P2 Po t P1 A D1 A' Bo W F E B' B SEC.:B-B' Cathode(tape hole side） Ko Ao SEC.:A-A' Item W P1 E F D0 D1 P0 P2 10P0 A0 B0 K0 SOD323HE 8±0.3 4±0.1 1.75±0.1 3.5±.05 1.55±0.05 1.1±0.1 4±0.1 2±0.05 40±0.2 1.45±0.1 2.75±0.1 0.80±0.1 SOD123FL 8±0.3 4±0.1 1.75±0.1 3.5±.05 1.55±0.05 1.1±0.1 4±0.1 2±0.05 40±0.2 1.95±0.1 3.95±0.1 1.30±0.1 T 0.25±0.05 0.25±0.05 SMA-FL 12±0.3 4±0.1 1.75±0.1 5.5±.05 1.55±0.05 1.5±0.1 4±0.1 2±0.05 40±0.2 2.83±0.1 4.75±0.1 1.42±0.1 SMB-FL TO277 12±0.3 8±0.1 1.75±0.1 5.5±.05 1.55±0.05 1.5±0.1 4±0.1 2±0.05 40±0.2 4.3±0.1 6.8±0.1 1.35±0.1 12±0.3 8±0.1 1.75±0.1 5.5±0.05 1.55±0.05 1.55±0.05 4±0.1 2±0.05 40±0.2 3.8±0.1 5.75±0.1 1.4±0.1 0.25±0.05 0.25±0.05 0.25±0.05 Title : DOC NO.： Power Diode SMD Package Packing Spec Version: 5 WI-258 Modification: 0 Page: 5 5.2、SMD Power Diode General Packing Spec A. 7" reel all labels will be at cathode side of reel ； Ｂ C A C side front B. 13" reel A:LRC label; A Ｂ C A:LRC label; B:Environment Label C:Halide free label Ｂ C A B:Environment Labe C:Halide free label C.Tape lead: face anode side of the reel,upper side is the tape lead position. All labels are at cathode side of the reel. 标题: DOC NO.： Power Diode SMD Package Packing Spec Version: 5 Modification: 0 Page: C. Label Content ： LRC Label WI-258 6 Two-dimension code Manufacturing it P/N ` Lot No. Date code Maker Quantity lot: 140106049X: 140106---2014/1/6；049----lot number:49；X：product code Environment Label Halide-free Label Green LMBR120LFT1G Thru LMBR160LFT1G 7. Update Record 版次 更新记录 更新作者 更新日期 1 第一版 周杰 2013.09.03 周杰 2014.06.30 2 1.将LMBR120LFT1G VF由0.45V改为0.385V; 2.IR由0.03mA改为0.10mA;