BRIGHT LED ELECTRONICS CORP. BS-A303RD SINCE 1981 ● ● Features : 1. 0.30 inch (7.62mm) Digit Height. 2. Continuous uniform segments. 3. Low power requirement. 4. Excellent characters appearance. 5. Solid state reliability. 6. Categorized for luminous intensity. 7. Direct drive common anode. Package Dimensions : 5.20(.205) 1.50(.059) 10 19.00(.748) 7.62(.300) 2.54(.100) 0.5(.020) 1.1(.043) 10.10(.394) 6.10(.240) 4.4±0.5(.173±020) ● 1. Description : 7.62(.300) The BS-A303RD is a 7.62mm(0.30") high single digit seven segments display. 2. This product use yellow chips, which are made from GaAsP on GaP substrate. 3. This product have a black face and white segments. 4. ● Notes: 1. All dimensions are in millimeters(inches). 2. Tolerance is ±0.25mm(.01")unless otherwise specified. 3. Specifications are subject to change without notice. This product doesn't contain restriction substance, comply ROHS standard. Internal Circuit Diagram : PIN NO.1 3,14 + A F G E B C RDP D + PIN NO.8 A B C D 1 13 10 8 NP: 4,5,12 E 7 F 2 G RDP 11 9 NC: 6. Ver.1.0 Page 1 of 3 BRIGHT LED ELECTRONICS CORP. BS-A303RD SINCE 1981 ● Absolute Maximum Ratings(Ta=25℃) Parameter Symbol Rating Unit Power Dissipation Per Segment Pd 80 mW Forward Current Per Segment IF 30 mA IFP (Duty 1/10, 1KHZ) 150 mA VR 5 V Operating Temperature Topr -40℃~80℃ - Storage Temperature Tstg -40℃~85℃ - Soldering Temperature (1/16" From Body) Tsol 260℃ For 5 Seconds - Peak Forward Current Per Segment Reverse Voltage Per Segment ● Electrical And Optical Characteristics(Ta=25℃) Parameter Symbol Condition Min. Typ. Max. Unit Forward Voltage Per Segment Vf IF=10mA - 2.0 2.5 V Luminous Intensity Per Segment Iv IF=10mA - 2.0 - mcd Reverse Current Per Segment IR VR=5V - - 100 µA Peak Wave Length λp IF=10mA - 585 - nm Dominant Wave Length λd IF=10mA 587 - 592 nm Spectral Line Half-width ∆λ IF=10mA - 35 - nm Ver.1.0 Page 2 of 3 BRIGHT LED ELECTRONICS CORP. BS-A303RD SINCE 1981 Typical Electro-Optical Characteristics Curves (25℃ Ambient Temperature Unless Otherwise Noted) Fig.1 Relative Radiant Intensity VS. Wavelength Relative Radiant Intensity 1.0 0.5 0 500 530 560 590 620 650 680 Wavelength(nm) Fig.2 Forward Current VS. Forward Voltage Relative Luminous Intensity (@20mA) Forward Current (mA) 50 40 30 20 10 0 1 2 3 4 Forward Voltage (V) 3.0 5 Fig.4 Relative Luminous Intensity VS. Forward Current 1.0 0 20 30 40 Forward Current(mA) 2.5 2.0 1.5 1.0 0.5 0 -40 50 2.0 10 3.0 50 Fig.3 Relative Luminous Intensity VS. Ambient Temperature -20 0 20 40 60 Ambient Temperature Ta( C) Forward Current(mA) Relative Luminous Intensity (@20mA) ● Fig.5 Forward Current Derating Curve VS. Ambient Temperature 40 30 20 10 0 20 40 60 80 100 120 Ambient Temperature Ta( C) Ver.1.0 Page 3 of 3