EMC2103 RPM-Based Fan Controller with Hardware Thermal Shutdown PRODUCT FEATURES Data Brief General Description Features The EMC2103 is an SMBus compliant fan controller with up to up to 3 external and 1 internal temperature channels. The fan driver can be operated using two methods each with two modes. The methods include an RPM based Fan Speed Control Algorithm and a direct PWM drive setting. The modes include manually programming the desired settings or using the internal programmable temperature look-up table to select the desired setting based on measured temperature. The temperature monitors offer 1°C accuracy (for external diodes) with sophisticated features to reduce errors introduced by series resistance and beta variation of substrate thermal diode transistors commonly found in processors. — 4-wire fan compatible — High and low frequency PWM Notebook Computers Projectors Graphics Cards Industrial and Networking Equipment RPM based fan control algorithm — 2.5% accuracy from 500RPM to 16k RPM — Detects fan aging and variation Temperature Look-Up Table — — — — Allows programmed fan response to temperature Controls fan speed or PWM drive setting Allows externally set temperature data to drive fan Supports DTS data from CPU Up to Three External Temperature Channels (EMC2103-2 only) — Supports 45nm, 60nm, and 90nm CPU diodes — Automatically detects and supports CPUs requiring BJT or Transistor models — Resistance error correction — Supports discrete transistors (i.e. 2N3904) — 1°C accurate (60°C to 125°C) — 0.125°C resolution The EMC2103 also includes a hardware programmable temperature limit and dedicated system shutdown output for thermal protection of critical circuitry. Applications Programmable Fan Control circuit Hardware Programmable Thermal Shutdown Temperature — Cannot be altered by software — 65°C to 127°C Range Programmable High and Low Limits for all channels Internal Temperature Monitor — 2°C accuracy — 0.125°C resolution 3.3V Supply Voltage SMBus 2.0 Compliant — SMBus Alert compatible SMSC EMC2103 Two dedicated GPIOs (EMC2103-2 and EMC2103-4 only) Available in 12-pin, QFN Lead-Free RoHS Compliant Package (EMC2103-1 and EMC2103-3) or 16-pin, QFN Lead-Free RoHS Compliant Package (EMC2103-2 and EMC2103-4) PRODUCT PREVIEW Revision 0.93 (01-08-10) RPM-Based Fan Controller with Hardware Thermal Shutdown ORDER NUMBERS: ORDERING NUMBER PACKAGE FEATURES EMC2103-1-KP-TR 12-pin, QFN Lead-Free, ROHS Compliant One external diode, RPM based Fan Speed Control Algorithm, High Frequency PWM driver, HW Thermal / Critical shutdown, EEPROM Load disabled EMC2103-2-AP-TR 16-pin, QFN Lead-Free, ROHS Compliant Up to three external diodes, RPM based Fan Speed Control algorithm, High Frequency PWM driver, HW Thermal / Critical shutdown, 2 GPIOs, EEPROM Load disabled EMC2103-4-AP-TR 16-pin, QFN Lead-Free, ROHS Compliant Up to three external diodes, RPM based Fan Speed Control algorithm, High Frequency PWM driver, HW Thermal / Critical shutdown, 2 GPIOs, EEPROM Load enabled REEL SIZE IS 4,000 PIECES This product meets the halogen maximum concentration values per IEC61249-2-21 For RoHS compliance and environmental information, please visit www.smsc.com/rohs 80 ARKAY DRIVE, HAUPPAUGE, NY 11788 (631) 435-6000, FAX (631) 273-3123 Copyright © 2010 SMSC or its subsidiaries. All rights reserved. Circuit diagrams and other information relating to SMSC products are included as a means of illustrating typical applications. Consequently, complete information sufficient for construction purposes is not necessarily given. Although the information has been checked and is believed to be accurate, no responsibility is assumed for inaccuracies. SMSC reserves the right to make changes to specifications and product descriptions at any time without notice. Contact your local SMSC sales office to obtain the latest specifications before placing your product order. The provision of this information does not convey to the purchaser of the described semiconductor devices any licenses under any patent rights or other intellectual property rights of SMSC or others. All sales are expressly conditional on your agreement to the terms and conditions of the most recently dated version of SMSC's standard Terms of Sale Agreement dated before the date of your order (the "Terms of Sale Agreement"). The product may contain design defects or errors known as anomalies which may cause the product's functions to deviate from published specifications. Anomaly sheets are available upon request. SMSC products are not designed, intended, authorized or warranted for use in any life support or other application where product failure could cause or contribute to personal injury or severe property damage. Any and all such uses without prior written approval of an Officer of SMSC and further testing and/or modification will be fully at the risk of the customer. Copies of this document or other SMSC literature, as well as the Terms of Sale Agreement, may be obtained by visiting SMSC’s website at http://www.smsc.com. SMSC is a registered trademark of Standard Microsystems Corporation (“SMSC”). Product names and company names are the trademarks of their respective holders. SMSC DISCLAIMS AND EXCLUDES ANY AND ALL WARRANTIES, INCLUDING WITHOUT LIMITATION ANY AND ALL IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE, TITLE, AND AGAINST INFRINGEMENT AND THE LIKE, AND ANY AND ALL WARRANTIES ARISING FROM ANY COURSE OF DEALING OR USAGE OF TRADE. IN NO EVENT SHALL SMSC BE LIABLE FOR ANY DIRECT, INCIDENTAL, INDIRECT, SPECIAL, PUNITIVE, OR CONSEQUENTIAL DAMAGES; OR FOR LOST DATA, PROFITS, SAVINGS OR REVENUES OF ANY KIND; REGARDLESS OF THE FORM OF ACTION, WHETHER BASED ON CONTRACT; TORT; NEGLIGENCE OF SMSC OR OTHERS; STRICT LIABILITY; BREACH OF WARRANTY; OR OTHERWISE; WHETHER OR NOT ANY REMEDY OF BUYER IS HELD TO HAVE FAILED OF ITS ESSENTIAL PURPOSE, AND WHETHER OR NOT SMSC HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES. Revision 0.93 (01-08-10) 2 PRODUCT PREVIEW SMSC EMC2103 RPM-Based Fan Controller with Hardware Thermal Shutdown DP2 / DN3* DN2 / DP3* Thermal Shutdown Logic External Temp Diodes Analog Mux GPIO2* GPIO1* GND VDD SHDN_SEL TRIP_SET DP1 DN1 SYS_SHDN Block Diagram GPIO Temp Limit Registers 11 bit Σ Δ ADC Temp Registers Internal Temp Diode SMBus Slave Protocol SMCLK SMDATA ALERT Configuration PWM TACH PWM driver Lookup Table / RPM Control Tach * denote EMC2103-2 pins only Figure 1 EMC2103 Block Diagram SMSC EMC2103 3 PRODUCT PREVIEW Revision 0.93 (01-08-10) RPM-Based Fan Controller with Hardware Thermal Shutdown Package Outline EMC2103-1 Package Information Figure 2 Preliminary 12-Pin QFN 4mm x 4mm Package Dimensions Revision 0.93 (01-08-10) 4 PRODUCT PREVIEW SMSC EMC2103 5 PRODUCT PREVIEW RPM-Based Fan Controller with Hardware Thermal Shutdown Revision 0.93 (01-08-10) SMSC EMC2103 Figure 3 Preliminary 12-Pin QFN 4mm x 4mm Package Drawing RPM-Based Fan Controller with Hardware Thermal Shutdown Figure 4 Recommended PCB Footprint 12-Pin QFN 4mm x 4mm Revision 0.93 (01-08-10) 6 PRODUCT PREVIEW SMSC EMC2103 RPM-Based Fan Controller with Hardware Thermal Shutdown EMC2103-2 Package Information Figure 5 Preliminary 16-Pin QFN 4mm x 4mm Package Dimensions SMSC EMC2103 7 PRODUCT PREVIEW Revision 0.93 (01-08-10) SMSC EMC2103 Figure 6 Preliminary 16-Pin QFN 4mm x 4mm Package Drawing 8 PRODUCT PREVIEW Revision 0.93 (01-08-10) RPM-Based Fan Controller with Hardware Thermal Shutdown RPM-Based Fan Controller with Hardware Thermal Shutdown Figure 7 Recommended PCB Footprint 16-Pin QFN 4mm x 4mm SMSC EMC2103 9 PRODUCT PREVIEW Revision 0.93 (01-08-10)