Online data sheet GL6-N4211 G6 PHOTOELECTRIC SENSORS GL6-N4211 | G6 PHOTOELECTRIC SENSORS A B C D E F H I J K L M N O P Q R S T Ordering information Type Part no. GL6-N4211 1059631 Other models and accessories www.sick.com/G6 Illustration may differ Detailed technical data Features Sensor/ detection principle Photoelectric retro-reflective sensor, Dual lens Dimensions (W x H x D) 12 mm x 31.5 mm x 21 mm Housing design (light emission) Rectangular Sensing range max. ≤ 6 m 1) Sensing range ≤ 5 m 1) Type of light Visible red light Light source PinPoint LED 2) Light spot size (distance) Ø 8 mm (350 mm) Wave length 650 nm Adjustment Potentiometer, 270° 1) 2) Reflector PL80A. Average service life: 100,000 h at TU = +25 °C. Mechanics/electronics Supply voltage 10 V DC ... 30 V DC 1) Ripple ± 10 % 2) 1) 2) 3) 4) 5) 6) 7) 8) 9) Limit values when operated in short-circuit protected network: max. 8 A. May not exceed or fall below Uv tolerances. Without load. At Uv > 24 V, IA max. = 50 mA. Signal transit time with resistive load. With light/dark ratio 1:1. A = VS connections reverse-polarity protected. B = inputs and output reverse-polarity protected. D = outputs overcurrent and short-circuit protected. 10) 2 Temperature stability following adjustment +/-10 °C. PHOTOELECTRIC SENSORS | SICK Online data sheet | 2017-12-07 19:30:42 Subject to change without notice GL6-N4211 | G6 PHOTOELECTRIC SENSORS Power consumption ≤ 30 mA 3) Switching output NPN Switching mode Light/dark switching Switching mode selector Selectable via light/dark selector Signal voltage NPN HIGH/LOW Approx. VS / ≤ 3 V Output current Imax. ≤ 100 mA 4) Response time < 625 µs 5) Switching frequency 1,000 Hz 6) Connection type Connector M8, 4-pin Circuit protection A 7) B 8) D 9) Protection class III Weight 20 g Polarisation filter ✔ Housing material Plastic, ABS/PC Optics material Plastic, PMMA Enclosure rating IP67 Ambient operating temperature –25 °C ... +55 °C 10) Ambient storage temperature –40 °C ... +70 °C UL File No. NRKH.E348498 & NRKH7.E348498 1) 2) 3) 4) 5) 6) 7) 8) 9) Limit values when operated in short-circuit protected network: max. 8 A. May not exceed or fall below Uv tolerances. Without load. At Uv > 24 V, IA max. = 50 mA. Signal transit time with resistive load. With light/dark ratio 1:1. A = VS connections reverse-polarity protected. B = inputs and output reverse-polarity protected. D = outputs overcurrent and short-circuit protected. 10) Temperature stability following adjustment +/-10 °C. Classifications ECl@ss 5.0 27270902 ECl@ss 5.1.4 27270902 ECl@ss 6.0 27270902 ECl@ss 6.2 27270902 ECl@ss 7.0 27270902 ECl@ss 8.0 27270902 ECl@ss 8.1 27270902 ECl@ss 9.0 27270902 ETIM 5.0 EC002717 ETIM 6.0 EC002717 UNSPSC 16.0901 39121528 2017-12-07 19:30:42 | Online data sheet Subject to change without notice PHOTOELECTRIC SENSORS | SICK 3 GL6-N4211 | G6 PHOTOELECTRIC SENSORS A B C D E F Adjustments possible Adjustment possibility 5 4 + – 7 ④ LED indicator green: Supply voltage active ⑤ LED indicator yellow: Status of received light beam ⑦ Sensitivity control: potentiometer Connection diagram Cd-066 BN H I J K L M N O P Q R S T 1 WH 2 BU 3 BK 4 + (L+) not connected - (M) Q Characteristic curve GL6 Operating reserve 100 1 10 4 3 5 2 Operatingrange 1 Sensing range max. typ. 1 2 (3.28) (6.56) 3 4 (9.84) (13.12) 5 6 (16.4) (19.69) Distance in m (feet) ① ② ③ ④ ⑤ 4 Reflector PL80A Reflector PL40A Reflector P250 Reflector PL20A Reflective tape REF-IRF-56 PHOTOELECTRIC SENSORS | SICK Online data sheet | 2017-12-07 19:30:42 Subject to change without notice GL6-N4211 | G6 PHOTOELECTRIC SENSORS Light spot size GL6, GL6G Ø 80 mm Ø 130 mm Sensor Ø 8 mm Ø 25 mm 0.35 1.0 3.0 5.0 Distance [m] Sensing range diagram GL6, GL6G 1 0.03 0.07 2 3 0.03 0.07 4 5 0.03 0.07 2.2 0.2 0.25 1.6 1.8 5.0 6.0 3.8 4.3 0.03 0.07 3.5 4.0 2.5 2 4 6 8 (6.56) (13.12) (19.69) (26.25) 0 Distance in m (feet) Sensing range ① ② ③ ④ ⑤ Sensing range max. Reflector PL80A Reflector PL40A Reflector P250 Reflector PL20A Reflective tape REF-IRF-56 21 (0.83) 0.5 (0.02) 9.7 28.5 (1.12) 6 31.5 (1.24) 11.4 3 (0.12) 5 L D (0.45) 25.4 (1.00) (0.30) 9.7 3 (0.38) ① ② ③ ④ ⑤ ⑥ 4 3 (0.38) 1 2 7.6 0.5 (0.02) Dimensional drawing (Dimensions in mm (inch)) 18.3 12 (0.72) (0.47) Optical axis, receiver Optical axis, sender Mounting holes M3 LED indicator green: Supply voltage active LED indicator yellow: Status of received light beam Light/ dark rotary switch: L = light switching, D = dark switching 2017-12-07 19:30:42 | Online data sheet Subject to change without notice PHOTOELECTRIC SENSORS | SICK 5 GL6-N4211 | G6 PHOTOELECTRIC SENSORS A B C D E F H I J K L M N O P Q R S T Recommended accessories Other models and accessories www.sick.com/G6 Brief description Type Part no. BEF-KHS-ISG6 2075080 BEF-SG-G6 2069044 BEF-WN-G6 2062909 Head A: female connector, M8, 4-pin, straight Head B: open cable ends Cable: PVC, unshielded, 2 m DOL-0804-G02M 6009870 Head A: female connector, M8, 4-pin, straight Head B: open cable ends Cable: PVC, unshielded, 5 m DOL-0804-G05M 6009872 Head A: female connector, M8, 4-pin, angled Head B: open cable ends Cable: PVC, unshielded, 2 m DOL-0804-W02M 6009871 Head A: female connector, M8, 4-pin, angled Head B: open cable ends Cable: PVC, unshielded, 5 m DOL-0804-W05M 6009873 Head A: female connector, M8, 4-pin, straight Head B: Cable: unshielded DOS-0804-G 6009974 Head A: female connector, M8, 4-pin, angled Head B: Cable: unshielded DOS-0804-W 6009975 Head A: male connector, M8, 4-pin, straight Head B: Cable: unshielded STE-0804-G 6037323 BEF-SLIT MASK-G6 2075254 Rectangular, screw connection, 47 mm x 47 mm, PMMA/ABS, Screw-on, 2 hole mounting P250 5304812 Rectangular, screw connection, 56 mm x 28 mm, PMMA/ABS, Screw-on, 2 hole mounting PL30A 1002314 Rectangular, screw connection, 80 mm x 80 mm, PMMA/ABS, Screw-on, 2 hole mounting PL80A 1003865 Universal bar clamp systems Clamp bar to fix G6 sensors on rods of 10 mm, clamp-on design up to 4 mm wall thickness, aluminum (clamp bar), stainless steel (bracket), clamp bar for 10 mm rod mounting and clamp function, mounting bracket, mounting hardware Device protection (mechanical) Stainless steel 1.4301 (SVS 304), 3 mm thick protective sleeve for G6, stainless steel 1.4301, mounting hardware included Mounting brackets and plates Plug connectors and cables Masks Slit mask, vertical slots, slot width: 1.0 mm, 2 pieces, black, Aluminum, Slit mask (2 pieces) Reflectors 6 PHOTOELECTRIC SENSORS | SICK Online data sheet | 2017-12-07 19:30:42 Subject to change without notice GL6-N4211 | G6 PHOTOELECTRIC SENSORS Brief description Fine triple reflector, screw connection, suitable for laser sensors, 18 mm x 18 mm, PMMA/ABS, Screw-on, 2 hole mounting Self-adhesive Round, plugable for metal plates, PMMA/ABS, Plug-in for sheets 2017-12-07 19:30:42 | Online data sheet Subject to change without notice Type Part no. PL10F 5311210 REF-IRF-56 5314244 PL22-3 1004488 PHOTOELECTRIC SENSORS | SICK 7 Online data sheet SICK at a glance SICK is one of the leading manufacturers of intelligent sensors and sensor solutions for industrial applications. A unique range of products and services creates the perfect basis for controlling processes securely and efficiently, protecting individuals from accidents and preventing damage to the environment. We have extensive experience in a wide range of industries and understand their processes and requirements. With intelligent sensors, we can deliver exactly what our customers need. In application centers in Europe, Asia and North America, system solutions are tested and optimized in accordance with customer specifications. All this makes us a reliable supplier and development partner. Comprehensive services complete our offering: SICK LifeTime Services provide support throughout the machine life cycle and ensure safety and productivity. For us, that is “Sensor Intelligence.” Worldwide presence: Contacts and other locations – www.sick.com SICK AG | Waldkirch | Germany | www.sick.com