AZETTLER AZ2800-2C-12A 30 amp miniature power relay Datasheet

AZ2800
30 AMP MINIATURE
POWER RELAY
FEATURES
•
•
•
•
•
•
30 Amp switching capability
DPST-NO and DPDT configuration
Meets 8 mm creepage, 4 kV dielectric
Meets Class F construction
Epoxy sealed versions available
UL, CUR file E44211, VDE 40023442
CONTACTS
GENERAL DATA
Arrangement
Ratings
DPST-N.O.
DPDT
Resistive load:
Max. switched power: 560 W or 8310 VA
Max. switched current:30 A N.O, 3 A N.C.
Max. switched voltage: 600 VAC or 30 VDC*
UL, CUR
N.O.
30 A at 277 VAC General Use, 100k cycles
1 Hp at 120 VAC, 100k cycles
2.5 Hp at 240 VAC, 100k cycles
110 LRA/25.3 FLA at 240 VAC (DC coils only),
30k cycles
UL, CUR 3 A at 277 VAC General Use, 100k cycles
N.C.
VDE N.O. 20A 250VAC, N.C. 3A 250VAC
*Note: If switching voltage is greater than 30VDC,
special precautions must be taken. Please contact
the factory.
Material
Resistance
Silver cadmium oxide, silver tin oxide
Life Expectancy
Mechanical
Electrical
Minimum operations
5 x 107
1 x 105 at 30 A 120 VAC Res. N.O.
Operate Time
15 ms typical
25 ms maximum with bounce
Release Time
10 ms typical
25 ms maximum with bounce
(with no coil suppression)
Dielectric Strength
1500 Vrms contact to contact
(at sea level for 1 min.) 4000 Vrms contact to coil
2000 Vrms between contact sets
Insulation Resistance
109 ohms minimum at 500 VDC
Dropout
DC: Greater than 10% of nominal coil voltage
AC: Greater than 20% of nominal coil voltage
Ambient Temperature
Operating
At nominal coil voltage
DC: -40°C (-40°F) to 95°C (203°F)
AC: -40°C (-40°F) to 75°C (167°F)
-40°C (-40°F) to 155°C (311°F)
<50 milliohms initially
(6 V, 1 A voltage drop method)
Storage
Vibration
0.062" DA at 10–55 Hz
Shock
Operational, 10 g for 11 ms 1/2 sine pulse
(no contact opening > 100usec)
Non-destructive, 100 g for 11 ms 1/2 sine pulse
Enclosure
P.B.T. polyester
Terminals
Quick connect tabs
COIL
Power
At Pickup Voltage
(typical)
DC: 0.925 W
AC: 2.6 VA
Max. Continuous
Dissipation
DC: 5.0 W at 20°C (68°F)
AC: 7.0 VA at 20°C (68°F)
Temperature Rise
DC: 48°C (86°F) at nominal coil voltage
AC: 68° C (122°F) at nominal coil voltage
Temperature
Max. 155°C (311°F)
Note: Allow suitable slack on leads when wiring,
and do not subject the terminals to excessive
force.
Max. Solvent Temp.
80°C (176°F)
Max. Immersion Time
30 seconds
Weight
86 grams
NOTES
1. All values at 20°C (68°F).
2. Relay may pull in with less than “Must Operate” value.
3. Specifications subject to change without notice.
3/3/08W
AZ2800
RELAY ORDERING DATA
COIL SPECIFICATIONS – DC Coil
ORDER NUMBER*
Nominal Coil
VDC
6
Must Operate
VDC
4.5
Max. Continuous
VDC
10.5
12
9.0
20.7
86
AZ2800–2C–12D
24
18.0
41.8
350
AZ2800–2C–24D
48
36.0
83.4
1390
AZ2800–2C–48D
110
82.5
190.5
7255
AZ2800–2C–110D
COIL SPECIFICATIONS – AC Coil
Nominal Coil
VAC
12
Coil Resistance
± 10%
22
AZ2800–2C–6D
60 Hz [1]
ORDER NUMBER*
35.7
AZ2800–2C–24A
Max. Continuous
VAC
15.6
19.2
31.2
120
96.0
156.0
33.5
830
208
166.4
270.4
19.3
2600
AZ2800–2C–208A
220
176.0
286
18.1
2870
AZ2800–2C–220A
240
192.0
312.0
17.3
3800
AZ2800–2C–240A
277
221.6
360.1
14.5
4700
AZ2800–2C–277A
24
Nominal Current
mA ± 10%
325
Coil Resistance
± 10%
9.5
Must Operate
VAC
9.6
154
AZ2800–2C–12A
AZ2800–2C–120A
*Add suffix “E” for epoxy sealed version. Add suffix “K” for 0.187x.020 or “J” for 0.187x.032 QC coil terminals. Substitute '2A” for “2C” to indicate
DPST (N.O.) contacts. Add suffix “E” to “2A” or “2C” to indicate AgSNO2 contacts.
[1] For 50 Hz coil replace “A” with “A5” (example: “A2280-2C-24A5”).
MECHANICAL DATA
.31
[8.0]
.58
[14.8]
WIRING DIAGRAM
.18
[4.6]
.63
[16.0]
1.36
[34.5]
1.00
[25.4]
.15
[3.8]
6 x.250
[6.35]
1.62
[41.1]
2.35
[59.7]
8 x.032
[.81]
0
2
4
3
6
8
7
1
1.04
[26.4]
2 FORM C
2 x DIM "A"
DIM. "A" = .250 [6.35] x .032 [.81] THK - STANDARD
0
DIM. "A" = .187 [4.75] x .020 [.51] THK - "K" SUFFIX
8 x.45
[11.4]
2
4
6
8
.13
[3.3]
1
2 FORM A
2.69
[68.4]
VIEWED TOWARD TERMINALS
Dimensions in inches with metric equivalents in parentheses. Tolerance: ± .010"
3/3/08W
Similar pages