Tak Cheong MMSZ5235CSW 200mw sod-323 surface mount small outline flat lead plastic package zener voltage regulator Datasheet

®
SEMICONDUCTOR
200mW SOD-323 SURFACE MOUNT
Green Product
Small Outline Flat Lead Plastic Package
Zener Voltage Regulators
Absolute Maximum Ratings
Symbol
PD
TA = 25°C unless otherwise noted
Parameter
Power Dissipation
Value
Units
200
mW
TSTG
Storage Temperature Range
-65 to +150
°C
TOPR
Operating Temperature Range
-65 to +150
°C
These ratings are limiting values above which the serviceability of the diode may be impaired.
SOD-323 Flat Lead
Specification Features:
ƒ
ƒ
ƒ
ƒ
ƒ
ƒ
ƒ
ƒ
Wide Zener Voltage Range Selection, 4.3V to 75V
VZ Tolerance Selection of ±2%
Flat Lead SOD-323 Small Outline Plastic Package
Cathode
Anode
Surface Device Type Mounting
ELECTRICAL SYMBOL
RoHS Compliant
Green EMC
Matte Tin(Sn) Lead Finish
Band Indicates Cathode
Electrical Characteristics
Device
Type
Device
Marking
MMSZ5229CSW
MMSZ5230CSW
MMSZ5231CSW
MMSZ5232CSW
MMSZ5233CSW
MMSZ5234CSW
MMSZ5235CSW
MMSZ5236CSW
MMSZ5237CSW
MMSZ5238CSW
MMSZ5239CSW
MMSZ5240CSW
MMSZ5241CSW
MMSZ5242CSW
MMSZ5243CSW
MMSZ5244CSW
MMSZ5245CSW
MMSZ5246CSW
MMSZ5247CSW
MMSZ5248CSW
MMSZ5249CSW
MMSZ5250CSW
229C
230C
231C
232C
233C
234C
235C
236C
237C
238C
239C
240C
241C
242C
243C
244C
245C
246C
247C
248C
249C
250C
TA = 25°C unless otherwise noted
VZ @ IZT
(Volts)
Min
Nom
Max
4.214
4.606
4.998
5.488
5.88
6.076
6.664
7.35
8.036
8.526
8.918
9.8
10.78
11.76
12.74
13.72
14.7
15.68
16.66
17.64
18.62
19.6
4.3
4.7
5.1
5.6
6.0
6.2
6.8
7.5
8.2
8.7
9.1
10
11
12
13
14
15
16
17
18
19
20
4.386
4.794
5.202
5.712
6.12
6.324
6.936
7.65
8.364
8.874
9.282
10.2
11.22
12.24
13.26
14.28
15.3
16.32
17.34
18.36
19.38
20.4
IZT
(mA)
ZZT @ IZT
(Ω)
Max
ZZK @ IZK = 0.25mA
(Ω)
Max
IR @ VR
(μA)
Max
VR
(Volts)
20
20
20
20
20
20
20
20
20
20
20
20
20
20
9.5
9
8.5
7.8
7.4
7
6.6
6.2
22
19
17
11
7
7
5
6
8
8
10
17
22
30
13
15
16
17
19
21
23
25
2000
1900
1600
1600
1600
1000
750
500
500
600
600
600
600
600
600
600
600
600
600
600
600
600
5
5
5
5
5
5
3
3
3
3
3
3
2
1
0.5
0.1
0.1
0.1
0.1
0.1
0.1
0.1
1
2
2
3
3.5
4
5
6
6.5
6.5
7
8
8.4
9.1
9.9
10
11
12
13
14
14
15
Number: DB-208
December 2009, Revision A
Page 1
MMSZ5221CSW through MMSZ5267CSW
TAK CHEONG
TAK CHEONG
®
SEMICONDUCTOR
Electrical Characteristics
Device
Type
Device
Marking
MMSZ5251CSW
MMSZ5252CSW
MMSZ5253CSW
MMSZ5254CSW
MMSZ5255CSW
MMSZ5256CSW
MMSZ5257CSW
MMSZ5258CSW
MMSZ5259CSW
MMSZ5260CSW
MMSZ5261CSW
MMSZ5262CSW
MMSZ5263CSW
MMSZ5264CSW
MMSZ5265CSW
MMSZ5266CSW
MMSZ5267CSW
251C
252C
253C
254C
255C
256C
257C
258C
259C
260C
261C
262C
263C
264C
265C
266C
267C
TA = 25°C unless otherwise noted
VZ @ IZT
(Volts)
Min
Nom
Max
21.56
23.52
24.5
26.46
27.44
29.4
32.34
35.28
38.22
42.14
46.06
49.98
54.88
58.8
60.76
66.64
73.5
22
24
25
27
28
30
33
36
39
43
47
51
56
60
62
68
75
22.44
24.48
25.5
27.54
28.56
30.6
33.66
36.72
39.78
43.86
47.94
52.02
57.12
61.2
63.24
69.36
76.5
IZT
(mA)
ZZT @ IZT
(Ω)
Max
ZZK @ IZK = 0.25mA
(Ω)
Max
IR @ VR
(μA)
Max
VR
(Volts)
5.6
5.2
5
4.6
4.5
4.2
3.8
3.4
3.2
3
2.7
2.5
2.2
2.1
2.0
1.8
1.7
29
33
35
41
44
49
58
70
80
93
105
125
150
170
185
230
270
600
600
600
600
600
600
700
700
800
900
1000
1100
1300
1400
1400
1600
1700
0.1
0.1
0.1
0.1
0.1
0.1
0.1
0.1
0.1
0.1
0.1
0.1
0.1
0.1
0.1
0.1
0.1
17
18
19
21
21
23
25
27
30
33
36
39
43
46
47
52
56
VF Forward Voltage = 900mV Maximum @ IF = 10 mA for all types
Notes:
1.
2.
3.
4.
The zener voltage (VZ) is tested under pulse condition of 1mS.
The device numbers listed have a standard tolerance on the nominal zener voltage of ±2%.
The zener impedance is derived from the 60-cycle ac voltage, which results when an ac current having an rms value equal to
10% of the dc zener current (IZT or IZK) is superimposed to IZT or IZK.
For detailed information on price, availability and delivery of nominal zener voltages between the voltages shown and tighter
voltage tolerances, contact your nearest Tak Cheong Electronics representative.
Number: DB-208
December 2009, Revision A
Page 2
TAK CHEONG
®
SEMICONDUCTOR
TYPICAL CHARACTERISTIC CURVES
Fig.2 EFFECT OF ZENER VOLTAGE ON ZENER IMPEDANCE
Fig.1 TYPICAL FORWARD VOLTAGE
POWER PASSIPATION,mW
250
200
150
100
50
0
0
25
50
75
100
125
150
175
200
TEMPERATURE [℃ ]
Fig.3 POWER DISSIPATION VS. AMBIENT TEMP.
Fig.5 ZENER BREAKDOWN CHARACTERISTICS
Fig.4 TYPICAL CAPACITANCE
Fig.6 ZENER BREAKDOWN CHARACTERISTICS
Number: DB-208
December 2009, Revision A
Page 3
TAK CHEONG
®
SEMICONDUCTOR
Fig.7 TYPICAL LEAKGE CURRENT
SOD-323 Package Outline
NOTES:
1. The above package outline is similar to JEITA SC-90.
2. Dimensions are exclusive of Burrs, Mold Flash & Tie Bar extrusions.
Number: DB-208
December 2009, Revision A
Page 4
TAK CHEONG
®
DISC LA I MER NOTIC E
NOTICE
The information presented in this document is for reference only. Tak Cheong reserves the right to make
changes without notice for the specification of the products displayed herein.
The product listed herein is designed to be used with ordinary electronic equipment or devices, and not
designed to be used with equipment or devices which require high level of reliability and the malfunction of with
would directly endanger human life (such as medical instruments, transportation equipment, aerospace
machinery, nuclear-reactor controllers, fuel controllers and other safety devices), Tak Cheong Semiconductor
Co., Ltd., or anyone on its behalf, assumes no responsibility or liability for any damagers resulting from such
improper use of sale.
This publication supersedes & replaces all information reviously supplied. For additional information, please visit
our website http://www.takcheong.com, or consult your nearest Tak Cheong’s sales office for further assistance.
Number: DB-100
April 14, 2008 / A
Similar pages