SUPER FLUX LED BTF-57GMCS-XX-X Package Dimension Product Features Ultra Bright Emerald Green Color High Light Output 5mm Super Flux Package Water Clear Lens Highly Reliable IC Compatible Leads without Stand Off Applications Outdoor Sign Board Automotive Front Panel Indicator Special Lighting General Purpose LEDs 0.01 inch Tolerance: ± Unit: ± 0.25 mm Optical and Electrical Characteristics at Ta=25℃ Parameter Symbol Minimum Typical Maximum Units Conditions Luminous Intensity Iv 2500 4000 － mcd IF = 20mA Viewing Angle 2θ1/2 － 90 － degree IF = 20mA λP 510 － 520 nm IF = 20mA VF － 3.3 4.0 V IF = 20mA IR 0 － 10 µA VR=5V Peak Wavelength DC Forward Voltage DC Reverse Current (Note 1) (Note 2) Notes: 1. Light intensity measures the light sensing response standard using chromatic meter. Refer to the CIE eye-response curve set by International Lighting committee. Tolerance of minimum and maximum intensity = ± 15% 2. Wavelength range can be selected from the bin selection table. Tolerance of minimum and maximum = ± 2.5nm 3. These products are sensitive to static electricity and care must be fully taken when handling products Page 1 of 2 DB LECTRO Inc. 3600 boul. Matte suite i Brossard Qc J4Y-2Z2 tel:(450)-444-1424 fax:(450)-444-4714 www.dblectro.com SUPER FLUX LED BTF-57GMCS-XX-X Absolute Maximum Ratings at Ta=25℃ Symbol Parameter Max. Unit PD Power Rating 80 mW VR Reverse Voltage (IR=10µA) 5 V IF Continuous Forward Current 30 mA IPF Peak Forward Current (0.1 duty cycle @ 1kHz) 100 mA Topr Operating Temperature Range –35 ~ + 80 ℃ Tstg Storage Temperature Range –40 ~ + 100 ℃ Lead Soldering Temperature [1.6mm (0.063inch) from body] 260℃ - max 5 seconds Wavelength and Brightness Selection BTF-57GMCS-XX-X Wavelength Bin Selection Bin G5 G6 XX Green (nm) 510~515 515~520 510~520 Brightness Bin Selection Bin S T U Range (mcd) 2500~3500 3500~4900 4900~6900 Page 2 of 2 DB LECTRO Inc. 3600 boul. Matte suite i Brossard Qc J4Y-2Z2 tel:(450)-444-1424 fax:(450)-444-4714 www.dblectro.com