MD200S18M3 Glass Passivated Three Phase Rectifier Bridge VRRM 800 to 1800V ID 200 Amp Applications y y y Circuit y + Three phase rectifiers for power supplies Rectifiers for DC motor field supplies Battery charger rectifiers Input rectifiers for variable frequency drives Features ~ ~ ~ y y y y y Three phase bridge rectifier Blocking voltage:800 to 1800V Heat transfer through aluminum oxide DBC ceramic isolated metal baseplate Glass passivated chip UL recognized applied for file no. E360040 Module Type TYPE VRRM VRSM MD200S08M3 MD200S12M3 MD200S16M3 MD200S18M3 800V 1200V 1600V 1800V 900V 1300V 1700V 1900V Maximum Ratings Symbol ID IFSM i2t Visol Tvj Tstg Mt Ms Weight Conditions Three phase, full wave Tc=100℃ t=10mS Tvj =45℃ t=10mS Tvj =45℃ a.c.50HZ;r.m.s.;1min To terminals(M6) To heatsink(M6) Module (Approximately) Thermal Characteristics Symbol Values 200 2240 25000 3000 -40 to +150 -40 to +125 5±15% 5±15% 230 Units A A A2s V ℃ ℃ Nm Nm g Values Units Conditions Rth(j-c) Per diode 0.45 ℃/W Rth(c-s) Module (Approximately) 0.025 ℃/W Electrical Characteristics Symbol Values Conditions VFM T=25℃ IF =300A IRD Tvj=25℃ VRD=VRRM Tvj=150℃ VRD=VRRM Document Number: S-M0023 Rev.1.0, May.31, 2013 Min. － Typ. 1.45 Max. 1.70 － － 0.5 6 Units V mA mA www.apt-semi.com 1 MD200S18M3 Performance Curves 300 480 A W 200 240 100 typ. max. Pvtot 25℃ - - -125℃ IF 0 0 0.5 VF 1.0 1.5 0 0 ID V 2.0 100 A 200 Fig2. Power dissipation Fig1. Forward Characteristics 0.5 3000 ℃/ W A 50HZ Zth(j-C) 2250 0.25 1500 750 0 0 0.001 0.01 0.1 1.0 10 S 100 1 10 cycles 100 Fig4. Max Non-Repetitive Forward Surge Current Fig3. Transient thermal impedance 250 A 200 150 100 50 ID 0 0 Tc 50 100 ℃ 150 Fig5.Forward Current Derating Curve Document Number: S-M0023 Rev.1.0, May.31, 2013 www.apt-semi.com 2 MD200S18M3 Package Outline Information CASE：M3 Dimensions in mm Document Number: S-M0023 Rev.1.0, May.31, 2013 www.apt-semi.com 3