Space Flight Surface Mount Flat Packs Resistor Networks 8900 Space Series • 100% screened to NASA EEE-INST-002 Level 1 • Gold to gold bonded lead construction - no internal solder connections or wire bonds • Excellent passive solution for space flight hardware • Self Passivating TaNFilm® element with superior moisture performance The 8900 Space Series features our TaNFilm® Flat Pack Network superior moisture performance of tantalum nitride resistor film system. Rugged, welded lead construction eliminates fragile wire bond construction and provides superior surface mount reliability. These parts are screened per MIL-PRF-83401 then upgraded to the stringent screening requirements for NASA space flight requirements. Electrical Data MIL-PRF-83401 Ratings Range Available Absolute Tolerances Available Ratio Tolerance (reference R1) Available Absolute TCR (ppm/°C) Tracking TCR (reference to R1) (ppm/°C) 20Ω - 99Ω FGJ FGJ ±100 ±10 100Ω - 121KΩ BFGJ ABFG ±25, ±50, ±100 ±5 20Ω - 499Ω FGJ FGJ ±100 ±20 Package Isolated Schematic Bussed Schematic 500.0Ω - 100KΩ BFGJ ABFG ±25, ±50, ±100 Voltage (not _____ to exceed √P x R) Element Power Rating 70°C 50V 50mW 50V 25mW ±5 Screening Data Series Type 89xxSQ Precap per MIL-STD-883 Optional Precap Source Verification Screening per MIL-PRF-83401 Yes Yes Yes Addition Screening IAW EEE-INST-002 Level 1 Serialized Thermal Shock 25 Cycles Power Conditioning 100 Hours Optional Final Source Inspection Yes Yes Yes Yes Marking P/N 89xxSQ -xx-yyyyzz General Note IRC reserves the right to make changes in product specification without notice or liability. All information is subject to IRC’s own data and is considered accurate at time of going to print. © IRC Advanced Film Division • 4222 South Staples Street • Corpus Christi Texas 78411 USA Telephone: 361 992 7900 • Facsimile: 361 992 3377 • Website: www.irctt.com A subsidiary of TT electronics plc 8900 Space Series Issue Feb 2009 Sheet 1 of 3 Space Flight Surface Mount Flat Packs Resistor Networks Environmental Data Performance Maximum ΔR per Characteristic H Environnmental Test MIL-PRF-83401 Typical Maximum Thermal Shock and Power Conditioning ±0.50% ±0.02% ±0.10% Low Temperature Operation ±0.10% ±0.01% ±0.01% Short Time Overload ±0.10% ±0.01% ±0.05% High Temperature Exposure ±0.20% ±0.03% ±0.10% Effects of Solder ±0.10% ±0.02% ±0.10% Moisture Resistance ±0.40% ±0.03% ±0.10% Life ±0.50% ±0.03% ±0.10% Physical and Schematic Data 0.075″ Max N L N 1 N-1 N-2 N-1 N-2 2 3 N/2 Isolated Schematic A 1 0.825″ Max 0.305″ Max included miniscus 3 N/2 0.250″ ± .010″ 0.300″ ± .050″ 0.030″ max miniscus typ 0.005″ ± .001″ 0.050″ ± .005″ 2 Bussed Schematic B 0.017″ ± .002″ 0.250″ ± .010″ # of leads Dimension L 14 0.375″ ± .010″ 16 0.390″ ± .020″ © IRC Advanced Film Division • 4222 South Staples Street • Corpus Christi Texas 78411 USA Telephone: 361 992 7900 • Facsimile: 361 992 3377 • Website: www.irctt.com 8900 Space Series Issue Feb 2009 Sheet 2 of 3 Space Flight Surface Mount Flat Packs Resistor Networks Power Derating Curve Prefix 100 % Of Rated Power Ordering Data FP - 8989 SQ - 05 - 1001 - B B - 1 Model 8987 = 14-pin bussed schematic B 8989 = 14-pin isolated schematic A 8998 = 16-pin bussed schematic B 8999 = 16-pin isolated schematic A 50 Special Screening Indicator SQ = EEE-INST-002 Level 1 10 TCR Code 25 70 150 04 = ±300ppm/°C; 05 = ±100ppm/°C; 06 = ±50ppm/°C 07 = ±25ppm/°C Ambient Temperature (°C) Resistance Code 4-Digit resistance code. Ex: 1002 = 10KΩ; 50R0 = 50Ω Absolute Tolerance Code J = ±5%; G = ±2%; F = ±1%; B = ±0.1% Optional R1 Ratio Tolerance Code G = ±2%; F = ±1%; D = ±0.5%; B = ±0.1%; A = ±0.05% Terminal Finish Option 0 = gold plating; 1 = 60/40 Sn/Pb hot solder dip For additional information or to discuss your specific requirements, please contact our Applications Team using the contact details below. © IRC Advanced Film Division • 4222 South Staples Street • Corpus Christi Texas 78411 USA Telephone: 361 992 7900 • Facsimile: 361 992 3377 • Website: www.irctt.com 8900 Space Series Issue Feb 2009 Sheet 3 of 3