The ABC75 Series of open frame power supplies feature a wide universal AC input range of 85 V – 264 VAC, offering 75 W of output power in a compact 3 x 2 x 1 inch footprint, with a variety of isolated single output voltages. The high efficiency and high power density of the ABC family ensures minimal power loss in enduse equipment, thereby facilitating higher reliability, easier thermal management and meets regulatory approvals for environmentally-friendly end products. 3 x 2 x 1 Inch Form Factor 75 Watts with Convection Cooling Efficiencies up to 93% -40 to 70 Degree Operating Temperature Thermal Shut-Down Feature 3.00 Million Hours, Telcordia -SR332-Issue 3 Standby Power < 0.3 W RoHS Compliant CE Marked These power supplies are ideal for telecom, datacom, industrial equipment and other applications. Instrumentation Lighting Industrial Applications Applied Computing Renewable Energy Test and Measurement Robotics Wireless Communication North America +1-866.513.2839 Asia-Pacific +86.755.29885888 Europe, Middle East +353 61 225 977 [email protected] © 2015 Bel Power Solutions, Inc. BCD.00664_001 ABC75 Series MODEL NUMBER DESCRIPTION VOLTAGE MAX. LOAD (CONVECTION) MIN. LOAD RIPPLE & NOISE 1 ABC75-1T12L ABC75-1012L Screw Terminal Molex Header 12 V 6.25 A 0.0 A 1% ABC75-1T15L ABC75-1015L Screw Terminal Molex Header 15 V 5.00 A 0.0 A 1% ABC75-1T24L ABC75-1024L Screw Terminal Molex Header 24 V 3.12 A 0.0 A 1% ABC75-1T30L ABC75-1030L Screw Terminal Molex Header 30 V 2.50 A 0.0 A 1% ABC75-1T48L ABC75-1048L Screw Terminal Molex Header 48 V 1.56 A 0.0 A 1% ABC75-1T58L ABC75-1058L Screw Terminal Molex Header 58 V 1.29 A 0.0 A 1% COVER-75-XBC 1 metal cover kit accessory Ripple is peak to peak with 20 MHz bandwidth and 10 μF (Tantalum capacitor) in parallel with a 0.1 μF capacitor at rated line voltage and load ranges. 866.513.2839 [email protected] © 2015 Bel Power Solutions, Inc. BCD.00664_001 ABC75 Series Specifications are for nominal input voltage, 25°C unless otherwise stated. PARAMETER DESCRIPTION / CONDITION SPECIFICATION Input Voltage Universal (Derate from 75 W at 100 VAC to 65 W at 85 VAC) 85-264 VAC / 390 VDC2 Input Frequency 47-63 Hz Input Current 115 VAC: 230 VAC: 1 A max. 0.5 A max. No Load Power Typical < 0.3 W Inrush Current 115 VAC: 230 VAC: 264 VAC: 25 A 45 A 75 A Power Factor @ Full Load > 0.95 Switching Frequency Typical 60 kHz 2 Functional, not approved. PARAMETER DESCRIPTION / CONDITION SPECIFICATION Output Power Convection: 75 W Efficiency 48 V, 58 V: 24 V, 30 V: 12 V, 15 V: 93% 91% 90% Hold-up Time Typical >16 ms Line Regulation +/-0.5% Load Regulation Transient Response +/-1% 25% step load change, at 0.1A/uS slew rate, 50% duty cycle, 50 Hz = 4% Voltage Adjustment Rise Time recovery time < 5 ms +/-3% Typical 55 ms Set Point Tolerance +/-1% Over Current Protection > 110% Over Voltage Protection Latch type (AC recycling required) Short Circuit Protection Hiccup mode PARAMETER Operating Temperature 110 to 140% DESCRIPTION / CONDITION SPECIFICATION Startup is guaranteed with spec deviation, see Fig 1. -40 to +70°C -40 to 0°C Storage Temperature -40 to +85°C Cooling With natural convection cooling at 100 to 264 VAC 75 W Relative Humidity Noncondensing 5% to 95% Altitude Operating: Nonoperating: 16,000 ft 40,000 ft. Reliability MTBF according to Telcordia -SR332-Issue 3 3.00 million hours 866.513.2839 [email protected] © 2015 Bel Power Solutions, Inc. BCD.00664_001 ABC75 Series PARAMETER DESCRIPTION / CONDITION Conducted Emissions EN55022-B, CISPR22-B, FCC PART15 - B Static Discharge EN61000-4-2: Level-3 RF Field Susceptibility EN61000-4-3: Level-3 Fast Transients/Bursts Level-3 Level A Level B Surge Susceptibility EN61000-4-4: Radiated: Radiated with external core: (King core K5B RC 25x12x15-M in input cable with 5 Turns) EN61000-4-5: Harmonic Current EN61000-3-2: Class D Radiated Emissions PARAMETER SPECIFICATION Agency Approvals DESCRIPTION / CONDITION Input to Output: (For ITE application) Input to GND: Approved to the latest edition of the following standards: CSA/UL60950-1, EN60950-1 and IEC60950-1; Class1 SELV. Nemko, UL, C-UL CE mark Complies with LVD Directive Isolation Voltage Safety Standard(s) Level-3 SPECIFICATION 3000 VAC 1500 VAC Figure 1 – Derating Curve CONNECTOR PIN AC Input Connector J1 DC Output Connector J2 DESCRIPTION / CONDITION Pin 1 Pin 2 Pin 3 AC Line Not Fitted AC Neutral Pin 1, 2 Pin 3, 4 V1 -VE V1 + VE Screw Terminal (Option 1) Molex Connector (Option 2) Screw Terminal (Option 1) Molex Connector (Option 2) MANUFACTURER / PN Molex: 39357-0003 Tyco: 2-1776112-3 Molex: 1722861103 (Mating conn: Molex 1722561003) Molex: 39357 -0004 Tyco: 2-1776112-4 Molex: 1722861104 (Mating conn: Molex 1722561004) 866.513.2839 [email protected] © 2015 Bel Power Solutions, Inc. BCD.00664_001 ABC75 Series PARAMETER DESCRIPTION / CONDITION Weight 150 g Dimensions 76.2 x 50.8 x 25.4 mm (3 x 2 x 1 inch) Figure 2 - Mechanical Drawing - Screw Terminal (Option 1) 866.513.2839 [email protected] © 2015 Bel Power Solutions, Inc. BCD.00664_001 ABC75 Series Figure 3 - Mechanical Drawing - Molex Connector (Option 2) NUCLEAR AND MEDICAL APPLICATIONS - Products are not designed or intended for use as critical components in life support systems, equipment used in hazardous environments, or nuclear control systems. TECHNICAL REVISIONS - The appearance of products, including safety agency certifications pictured on labels, may change depending on the date manufactured. Specifications are subject to change without notice. 866.513.2839 [email protected] © 2015 Bel Power Solutions, Inc. BCD.00664_001