Miniature Aluminum Electrolytic Capacitors NRE-SW Series SUPER-MINIATURE, RADIAL LEADS, POLARIZED RoHS Compliant FEATURES • HIGH PERFORMANCE IN LOW PROFILE (7mm) HEIGHT • GOOD 100KHz PERFORMANCE CHARACTERISTICS • WIDE TEMPERATURE -55 TO + 105OC includes all homogeneous materials CHARACTERISTICS *See Part Number System for Details Rated Working Voltage Range Capacitance Range Operating Temperature Range Capacitance Tolerance Max. Leakage Current After 1 minutes At 20oC 6.3 ~ 50Vdc 0.1 ~ 330µF -55oC~+105OC +20% (M) 0.01CV or 3µA Whichever is greater W.V. (Vdc) S.V. (Vdc) Tan δ @ 120Hz W.V. (Vdc) Z-40oC/Z+20oC Z-55oC/Z+20oC Capacitance Change Dissipation Factor Leakage Current Surge Voltage & Dissipation Factor (Tan δ) Low Temperature Stability (Impedance Ratio @ 120Hz) Life Test @ +105oC 1,000 hours 6.3 8 0.24 6.3 4 6 10 13 0.21 10 3 5 16 25 35 20 32 44 0.18 0.14 0.12 16 25 35 2 2 2 4 3 3 Within +25% of initial value Less than 200% of specified maximum value Less than specified maximum value STANDARD PRODUCT AND CASE SIZE TABLE Dφ x L (mm) ����µ�� ���� ��� ���� ���� ���� ��� ��� ��� ��� �� �� �� �� ��� ��� ��� ��� ��� ��� ��� ��� ��� ��� ��� ��� ��� ��� ��� ��� ��� ��� ��� � � � � � � � � � ��� ��� ��� ��� � � ��� � � ��� � � �� � � � � � � � � � ��� ��� ��� � � ��� � � ��� � � � ������� ������� ����� �� �� � � � � � � � � � � � � � � � ��� ��� ��� ��� ��� � � ��� � � ��� � � ��� � � ��� � � ��� � � ��� � � � ��� � � � � �� � � � � � � � ��� ��� ��� � � ��� � � ��� � � ��� � � � � Cap (µF) 0.1 0.22 0.33 0.47 1.0 2.2 3.3 4.7 10 22 33 47 100 220 330 6.3 4.2 2.0 2.0 1.2 1.2 1.2 Working Voltage 10 16 25 35 - 4.2 6.0 - 4.2 2.0 3.1 4.2 2.0 1.2 1.6 2.0 1.2 1.2 1.6 1.2 1.2 1.2 1.6 1.2 1.2 1.5 1.6 1.2 1.2 - 50 30.0 16.0 13.0 12.0 10.0 7.8 6.2 3.1 1.6 1.6 1.6 1.6 - ® 80 NIC COMPONENTS CORP. Polarity Marking ����µ�� ��� ���� ���� ���� ��� ��� ��� ��� �� �� �� �� ��� ��� ��� ��� � � � � � � � � � �� �� �� ��� ��� ��� ������� ������� ����� �� �� �� �� � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � �� �� � �� �� �� �� �� ��� ��� �� ��� ��� ��� ��� ��� ��� ��� ��� ��� ��� ��� � � ��� ��� � � � � �� �� �� �� �� �� �� �� �� ��� ��� ��� ��� � � � RIPPLE CURRENT CORRECTION FACTORS Insulation Sleeve dφ ± 0.05 F ± 0.5 L + β max. MAX.RIPPLE CURRENT (mA rms 100KHz & 105oC) �� ��� ��� ��� ��� ��� ��� ��� ��� ��� � � ��� � � ��� � � ��� � � � � � MAXIMUM E.S.R. (Ω) AT 20oC/100 KHz 50 63 0.10 50 2 3 15mm Min. Frequency (Hz) 120 1K 10K 100K 4 x 7mm Correction 5 x 7mm Factor 6.3 x 7mm 0.50 0.60 0.70 0.70 0.80 0.85 0.93 0.93 0.93 1.00 1.00 1.00 LEAD SPACING & DIAMETER (mm) 4mm Min. ���� ���� ���� � � ��� ����� ���� ���� ���� ������� ��� ���� � ���� � ���� ��� ��� ��� ���� ��� ��� ��� ���� ��� ��� ��� PART NUMBER SYSTEM Dφ ± α NRE-SW 100 M 35V 5 x 5 TR F RoHS Compliant Tape and Reel* Size (D∅ x L) Rated Voltage Tolerance Code Capacitance Code PRECAUTIONS Please review the notes on correct use, safety and precautions found on pages T10 & T11 of NIC’s Electrolytic Capacitor catalog. Also found at www.niccomp.com/precautions If in doubt or uncertainty, please review your specific application - process details with NIC’s technical support personnel: [email protected] www.niccomp.com www.lowESR.com Series *see tape specification for details www.RFpassives.com www.SMTmagnetics.com