NI NIcRIO-9101 C series analog input module Datasheet

C Series Analog Input Modules
NI 9201, NI 921x, NI 9221, NI 923x
• Signal conditioning for high voltage
(±60 V), thermocouples, RTDs,
accelerometers, microphones,
strain gages, current inputs
• Advanced features such as smart TEDS
sensor capability, antialiasing filters,
open-thermocouple detection
• ±80 mV, ±10 V, or ±60 V analog
input ranges
• 12-, 16-, or 24-bit
(delta-sigma) resolution
• Up to 800 kS/s multiplexed or up to
100 kS/s simultaneous-sampling
analog-to-digital converter (ADC)
• Up to 32 channels per module
• Up to 2,300 Vrms isolation (withstand),
up to 250 Vrms isolation (continuous)
• NIST-traceable calibration certificate
for guaranteed accuracy
Model CompactRIO NI CompactDAQ
Signal Type
Channels
Resolution
(bits)
Max Sampling
Rate (S/s)
Signal
Input Ranges
Simultaneous Antialiasing
Isolation Connector Options
Sampling
Filters
NI 9201
NI 9203
NI 9205
NI 9206
Voltage
Current
Voltage
CAT I Isolated
Voltage
8
8
32 SE/16 DI
16 DI
12
16
16
16
500 k
200 k
250 k
250 k
±10 V
±20 mA, 0 to 20 mA
±10, ±5, ±1, ±0.2 V
±10, ±5, ±1, ±0.2 V
NI 9211
NI 9215
NI 9217
NI 9221
NI 9233
NI 9237
Thermocouple
Voltage
RTD
Voltage
IEPE
Bridge
4
4
4
8
4
4
24
16
24
12
24
24
15
100 k/ch
400
800 k
50 k/ch
50 k/ch
±80 mV
±10 V
0 to 400 Ω
±60 V
±5 V
±250 mV
–
–
–
–
–
–
–
–
Screw Terminal, D-Sub
Screw Terminal
Spring Terminal, D-Sub
Spring Terminal
–
–
–
Screw Terminal
Screw Terminal, BNC
Screw Terminal
Screw Terminal, D-Sub
BNC
RJ50
–
–
–
Table 1. C Series Analog Input Modules Selection Guide
Overview
High-accuracy C Series analog input modules for National Instruments
CompactRIO and NI CompactDAQ provide high-performance measurements
for a wide variety of industrial, in-vehicle, and laboratory sensors and
signal types. Each module includes built-in signal conditioning and an
integrated connector with screw terminal or cable options for flexible
and low-cost signal wiring. All modules feature NI CompactRIO Extreme
Industrial Certifications and Ratings.
System Compatibility
You can use NI C Series modules in multiple system types depending
on available software. See Table 1 for CompactRIO and NI CompactDAQ
module compatibility because not all modules work with both systems.
Many of the advanced features described apply only to reconfigurable
I/O systems and not to NI CompactDAQ.
Advanced Features
When used with CompactRIO, NI C Series analog input modules
connect directly to reconfigurable I/O (RIO) FPGA hardware to create
high-performance embedded systems. The reconfigurable FPGA
hardware within CompactRIO provides a variety of options for custom
timing, triggering, synchronization, filtering, signal processing, and
high-speed decision making for all C Series analog modules. For
instance, with CompactRIO, you can implement custom triggering for
any analog sensor type on a per-channel basis using the flexibility and
performance of the FPGA and the numerous arithmetic and comparision
function blocks built into NI LabVIEW FPGA.
Key Features
• High-accuracy, high-performance analog measurements for any
CompactRIO embedded system, R Series expansion chassis, or
NI CompactDAQ chassis
• Screw terminals, BNC, D-Sub, spring terminals, strain relief, highvoltage, cable, solder cup backshell, and other connectivity options
• Available channel-to-earth ground double-isolation barrier for safety,
noise immunity, and high common-mode voltage range
• CompactRIO Extreme Industrial Certifications and Ratings
• Built-in signal conditioning for direct connection to sensors and
industrial devices
Visit ni.com/compactrio or ni.com/compactdaq for up-to-date
information on module availability, example programs, application notes,
and other developer tools.
North American
Hazardous Locations
C Series Module Accessories
Connectivity Accessories
CompactRIO and NI CompactDAQ systems are designed to provide
flexible options for low-cost field wiring and cabling. Most C Series
modules have a unique connector block option that offers secure and
safe connections to your C Series system. Table 2 contains all of the
connector blocks available for C Series I/O modules.
Accessory
NI 9932
NI 9933
NI 9934
NI 9935
NI 9936
NI 9939
The NI 9933 includes a screw-terminal connector with strain relief
as well as a D-Sub solder cup backshell for creating custom cable
assemblies for any module with a 37-pin D-Sub connector.
Description
10-position strain relief and high-voltage screw-terminal connector kit
37-pin D-Sub connector kit with strain relief and D-Sub shell
25-pin D-Sub connector kit with strain relief and D-Sub shell
15-pin D-Sub connector kit with strain relief and D-Sub shell
10-position screw-terminal plugs (quantity 10)
16-position connector kit with strain relief
Note: To meet shock and vibration requirements, you must affix ferrules to the ends of the wires on all
screw-terminal connectors.
Table 2. Connector Blocks for C Series I/O Modules
Table 3 lists the recommended connector block accessories for each
C Series analog input module.
C Series Analog Input Module
NI 9201
NI 9201 with D-Sub
NI 9211
NI 9215
NI 9217
NI 9221
NI 9221 with D-Sub
Figure 2. NI 9933 37-Pin D-Sub Connector Kit with Strain Relief and D-Sub Shell
The NI 9934 includes a screw-terminal connector with strain relief
as well as a D-Sub solder cup backshell for creating custom cable
assemblies for any module with a 25-pin D-Sub connector.
Recommended Module Accessory
NI 9932, NI 9936
NI 99341
NI 9932, NI 9936
NI 9932, NI 9936
NI 9939
NI 9932, NI 9936
NI 99341
1Requires a 25-pin D-Sub connector such as the NI 9934 accessory kit.
Table 3. Recommended Connector Block Accessories
Figure 3. NI 9934 25-Pin D-Sub Connector Kit with Strain Relief and D-Sub Shell
The NI 9932 kit provides strain relief and operator protection from
high-voltage signals for any 10-position screw-terminal module.
The NI 9935 includes a screw-terminal connector with strain relief as
well as a D-Sub solder cup backshell for creating custom cable
assemblies for any module with a 15-pin D-Sub connector.
Figure 1. NI 9932 10-Position Strain Relief and High-Voltage Screw-Terminal
Connector Kit
Figure 4. NI 9935 15-Pin D-Sub Connector Kit with Strain Relief and D-Sub Shell
BUY ONLINE at ni.com or CALL 800 813 3693 (U.S.)
2
C Series Module Accessories
The NI 9936 consists of 10-position screw-terminal plugs for any
10-position screw-terminal module.
Figure 5. NI 9936 10-Position Screw-Terminal Plugs
Visit ni.com/compactrio or ni.com/compactdaq for up-to-date
information on availability of accessories.
BUY ONLINE at ni.com or CALL 800 813 3693 (U.S.)
3
CompactRIO Ordering Information
Ordering Information
Developer Kits
NI cRIO-9961 Embedded System Developer
Hardware Evaluation Kit ..................................................779107-01
NI Reconfigurable I/O
Software Development Kit................................................779149-03
Reconfigurable Embedded Systems
Real-Time Controllers
NI cRIO-9002 ........................................................................779000-01
NI cRIO-9004 ........................................................................779055-01
Reconfigurable Chassis
NI cRIO-9101 ........................................................................779052-01
NI cRIO-9102 ........................................................................779007-01
NI cRIO-9103 ........................................................................779053-01
NI cRIO-9104 ........................................................................779054-01
Power Supplies
NI PS-1 ..................................................................................777567-01
NI PS-2
U.S. 120 VAC/Japan 100 VAC ..........................................777584-01
North American 240 VAC ..................................................777584-05
NI PS-3
U.S. 120 VAC/Japan 100 VAC ..........................................777585-01
North American 240 VAC ..................................................777585-05
NI PS-4 ..................................................................................778586-90
NI PS-5 ..................................................................................778805-90
R Series Expansion Systems
Expansion Chassis
NI cRIO-9151 chassis ............................................................779008-01
SH68-C68-S cable, 2 m ........................................................186381-02
R Series Devices
PCI
NI PCI-7811R digital I/O ........................................................779363-01
NI PCI-7813R digital I/O ........................................................779370-01
NI PCI-7830R multifunction I/O ............................................779361-01
NI PCI-7831R multifunction I/O ............................................778797-01
NI PCI-7833R multifunction I/O ............................................779359-01
PXI
NI PXI-7811R digital I/O ........................................................778800-01
NI PXI-7813R digital I/O ........................................................779362-01
NI PXI-7830R multifunction I/O ............................................779364-01
NI PXI-7831R multifunction I/O ............................................778668-01
NI PXI-7833R multifunction I/O ............................................779360-01
C Series Modules1
Analog Input Modules
NI 9201 ..................................................................................779013-01
NI 9201 with D-Sub ..............................................................779372-01
NI 9203 ..................................................................................779516-01
NI 9205 ..................................................................................779519-01
NI 9205 with D-Sub ..............................................................779357-01
NI 9206 ..................................................................................779526-01
NI 9211 ..................................................................................779001-01
NI 9215 ..................................................................................779011-01
NI 9215 with BNC..................................................................779138-01
NI 9217 ..................................................................................779592-01
NI 9221 ..................................................................................779014-01
NI 9221 with D-Sub ..............................................................779373-01
NI 9233 ..................................................................................779015-01
NI 9237 ..................................................................................779521-01
Analog Output Module
NI 9263 ..................................................................................779012-01
NI 9265 ..................................................................................779334-01
Digital Input and Counter/Timer Modules
NI 9401 ..................................................................................779351-01
NI 9411 ..................................................................................779005-01
NI 9421 ..................................................................................779002-01
NI 9421 with D-Sub ..............................................................779136-01
NI 9422 ..................................................................................779522-01
NI 9423 ..................................................................................779009-01
NI 9425 ..................................................................................779139-01
NI 9435 ..................................................................................779010-01
Digital Output and Relay Modules
NI 9401 ..................................................................................779351-01
NI 9472 ..................................................................................779004-01
NI 9472 with D-Sub ..............................................................779137-01
NI 9474 ..................................................................................779003-01
NI 9476 ..................................................................................779140-01
NI 9477 ..................................................................................779517-01
NI 9481 ..................................................................................779006-01
Accessories
NI 9912 ..................................................................................779019-01
NI 9915 ..................................................................................779018-01
NI 9917 ..................................................................................779454-01
NI 9918 ..................................................................................779455-01
NI 9932 ..................................................................................779017-01
NI 9933 ..................................................................................779103-01
NI 9934 ..................................................................................779104-01
NI 9935 ..................................................................................779016-01
NI 9936 ..................................................................................779105-01
NI 9937 ..................................................................................779106-01
NI 9939 ..................................................................................192692-01
Ethernet Cables
CAT 5
5 m ....................................................................................182219-05
CAT 5 Crossover
5 m ....................................................................................187375-05
OEM Discounts Available
NI offers aggressive OEM pricing discounts for high-volume OEM
applications. Contact NI for a quote.
1Visit
ni.com/compactrio for up-to-date information on module availability.
BUY NOW!
For complete product specifications, pricing, and accessory
information, call 800 813 3693 (U.S.) or go to ni.com/compactrio.
BUY ONLINE at ni.com or CALL 800 813 3693 (U.S.)
4
NI CompactDAQ Ordering Information
Ordering Information
System Chassis
NI cDAQ-9172
U.S. (120 VAC) ..................................................................779508-01
Switzerland (220 VAC) ......................................................779508-02
Australia (240 VAC) ..........................................................779508-03
Europe (240 VAC) ..............................................................779508-04
UK (240 VAC) ....................................................................779508-06
Japan (100 V) ....................................................................779508-07
C Series Modules
Analog Input Modules
NI 9205 ..................................................................................779519-01
NI 9205 with D-Sub ..............................................................779357-01
NI 9206 ..................................................................................779526-01
NI 9211 ..................................................................................779001-01
NI 9215 ..................................................................................779011-01
NI 9215 with BNC..................................................................779138-01
NI 9233 ..................................................................................779015-01
NI 9237 ..................................................................................779521-01
Analog Output Module
NI 9263 ..................................................................................779012-01
Accessories
NI 9915 ..................................................................................779018-01
NI 9901 ..................................................................................779473-01
NI 9933 ..................................................................................779103-01
NI 9940 ..................................................................................779567-01
NI 9941 ..................................................................................779568-01
NI 9917 ..................................................................................779454-01
NI 9918 ..................................................................................779455-01
NI 9932 ..................................................................................779017-01
NI 9936 ..................................................................................779105-01
Academic Bundles
Standard Bundle ....................................................................777448-60
Instrumentation Bundle ........................................................777448-61
DSA (Sound and Vibration) Bundle ......................................777448-62
OEM Discounts Available
NI offers aggressive OEM pricing discounts for high-volume OEM
applications. Contact NI for a quote.
1Visit
ni.com/compactrio or ni.com/compactdaq for up-to-date information
on module availability.
Digital Input Modules
NI 9401 ..................................................................................779351-01
NI 9421 ..................................................................................779002-01
NI 9421 with D-Sub ..............................................................779136-01
Digital Output and Relay Modules
NI 9401 ..................................................................................779351-01
NI 9472 ..................................................................................779004-01
NI 9472 with D-Sub ..............................................................779137-01
NI 9481 ..................................................................................779006-01
BUY NOW!
For complete product specifications, pricing, and accessory
information, call 800 813 3693 (U.S.) or go to ni.com/compactdaq.
BUY ONLINE at ni.com or CALL 800 813 3693 (U.S.)
5
NI Services and Support
NI has the services and support to meet
your needs around the globe and through
the application life cycle – from planning
and development through deployment
and ongoing maintenance. We offer
services and service levels to meet
customer requirements in research,
design, validation, and manufacturing.
Visit ni.com/services.
Training and Certification
NI training is the fastest, most certain route to productivity with our
products. NI training can shorten your learning curve, save development
time, and reduce maintenance costs over the application life cycle. We
schedule instructor-led courses in cities worldwide, or we can hold a
course at your facility. We also offer a professional certification program
that identifies individuals who have high levels of skill and knowledge on
using NI products. Visit ni.com/training.
Professional Services
Our NI Professional Services team is composed of NI applications
and systems engineers and a worldwide National Instruments Alliance
Partner program of more than 600 independent consultants and
integrators. Services range
from start-up assistance to
turnkey system integration.
Visit ni.com/alliance.
OEM Support
We offer design-in consulting and product integration assistance if you
want to use our products for OEM applications. For information about
special pricing and services for OEM customers, visit ni.com/oem.
ni.com • (800) 813 3693
National Instruments • [email protected]
Local Sales and Technical Support
In offices worldwide, our staff is local to the country, giving you access
to engineers who speak your language. NI delivers industry-leading
technical support through online knowledge bases, our applications
engineers, and access to 14,000 measurement and automation
professionals within NI Developer Exchange forums. Find immediate
answers to your questions at ni.com/support.
We also offer service programs that provide automatic upgrades to
your application development environment and higher levels of technical
support. Visit ni.com/ssp.
Hardware Services
NI Factory Installation Services
NI Factory Installation Services (FIS) is the fastest and easiest way to
use your PXI or PXI/SCXI combination systems right out of the box.
Trained NI technicians install the software and hardware and configure
the system to your specifications. NI extends the standard warranty by
one year on hardware components (controllers, chassis, modules)
purchased with FIS. To use FIS, simply configure your system online
with ni.com/pxiadvisor.
Calibration Services
NI recognizes the need to maintain properly calibrated devices for
high-accuracy measurements. We provide manual calibration
procedures, services to recalibrate your products, and automated
calibration software specifically designed for use by metrology
laboratories. Visit ni.com/calibration.
Repair and Extended Warranty
NI provides complete repair services for our products. Express repair
and advance replacement services are also available. We offer
extended warranties to help you meet project life-cycle requirements.
Visit ni.com/services.
*351511A-01*
351511A-01
© 2007 National Instruments Corporation. All rights reserved. CompactRIO, National Instruments, National Instruments Alliance Partner, NI, ni.com, NI CompactDAQ,
and SCXI are trademarks of National Instruments. Other product and company names listed are trademarks or trade names of their respective companies.
A National Instruments Alliance Partner is a business entity independent from NI and has no agency, partnership, or joint-venture relationship with NI.
2007-9108-301-101-D
Similar pages