BC846ALT1G Series General Purpose Transistors NPN Silicon Features • Moisture Sensitivity Level: 1 • ESD Rating − Human Body Model: >4000 V • • www.onsemi.com ESD Rating − Machine Model: >400 V S and NSV Prefix for Automotive and Other Applications Requiring Unique Site and Control Change Requirements; AEC−Q101 Qualified and PPAP Capable These Devices are Pb−Free, Halogen Free/BFR Free and are RoHS Compliant COLLECTOR 3 1 BASE 2 EMITTER MAXIMUM RATINGS Rating Symbol Collector-Emitter Voltage Value Unit VCEO Collector−Base Voltage Vdc 1 2 VCBO Vdc VEBO Vdc 6.0 6.0 5.0 BC846 BC847, BC850 BC848, BC849 Collector Current − Continuous SOT−23 CASE 318 STYLE 6 80 50 30 BC846 BC847, BC850 BC848, BC849 Emitter−Base Voltage 3 65 45 30 BC846 BC847, BC850 BC848, BC849 IC 100 MARKING DIAGRAM XX M G G mAdc Stresses exceeding those listed in the Maximum Ratings table may damage the device. If any of these limits are exceeded, device functionality should not be assumed, damage may occur and reliability may be affected. THERMAL CHARACTERISTICS Characteristic Total Device Dissipation FR− 5 Board, (Note 1) TA = 25°C Derate above 25°C Thermal Resistance, Junction−to−Ambient (Note 1) Total Device Dissipation Alumina Substrate (Note 2) TA = 25°C Derate above 25°C Thermal Resistance, Junction−to−Ambient (Note 2) Junction and Storage Temperature Range Symbol Max Unit PD 225 mW 1 XX M G = Device Code = Date Code* = Pb−Free Package (Note: Microdot may be in either location) *Date Code orientation and/or overbar may vary depending upon manufacturing location. RqJA 1.8 mW/°C 556 °C/W ORDERING INFORMATION PD 300 mW 2.4 mW/°C RqJA 417 °C/W TJ, Tstg −55 to +150 °C See detailed ordering and shipping information in the package dimensions section on page 12 of this data sheet. 1. FR− 5 = 1.0 0.75 0.062 in. 2. Alumina = 0.4 0.3 0.024 in 99.5% alumina. © Semiconductor Components Industries, LLC, 2015 March, 2015 − Rev. 14 1 Publication Order Number: BC846ALT1/D BC846ALT1G Series ELECTRICAL CHARACTERISTICS (TA = 25°C unless otherwise noted) Characteristic Symbol Min Typ Max Unit OFF CHARACTERISTICS Collector −Emitter Breakdown Voltage (IC = 10 mA) BC846A, B BC847A, B, C, BC850B, C BC848A, B, C, BC849B, C V(BR)CEO 65 45 30 − − − − − − V Collector −Emitter Breakdown Voltage (IC = 10 mA, VEB = 0) BC846A, B BC847A, B, C BC850B, C BC848A, B, C, BC849B, C V(BR)CES 80 50 30 − − − − − − V Collector −Base Breakdown Voltage (IC = 10 mA) BC846A, B BC847A, B, C, BC850B, C BC848A, B, C, BC849B, C V(BR)CBO 80 50 30 − − − − − − V Emitter −Base Breakdown Voltage (IE = 1.0 mA) BC846A, B BC847A, B, C, BC850B, C BC848A, B, C, BC849B, C V(BR)EBO 6.0 6.0 5.0 − − − − − − V ICBO − − − − 15 5.0 nA mA hFE − − − 90 150 270 − − − − 110 200 180 290 220 450 420 520 800 Collector Cutoff Current (VCB = 30 V) (VCB = 30 V, TA = 150°C) ON CHARACTERISTICS DC Current Gain (IC = 10 mA, VCE = 5.0 V) BC846A, BC847A, BC848A BC846B, BC847B, BC848B BC847C, BC848C (IC = 2.0 mA, VCE = 5.0 V) BC846A, BC847A, BC848A BC846B, BC847B, BC848B, BC849B, BC850B BC847C, BC848C, BC849C, BC850C Collector −Emitter Saturation Voltage (IC = 10 mA, IB = 0.5 mA) Collector −Emitter Saturation Voltage (IC = 100 mA, IB = 5.0 mA) VCE(sat) − − − − 0.25 0.6 V Base −Emitter Saturation Voltage (IC = 10 mA, IB = 0.5 mA) Base −Emitter Saturation Voltage (IC = 100 mA, IB = 5.0 mA) VBE(sat) − − 0.7 0.9 − − V Base −Emitter Voltage (IC = 2.0 mA, VCE = 5.0 V) Base −Emitter Voltage (IC = 10 mA, VCE = 5.0 V) VBE(on) 580 − 660 − 700 770 mV fT 100 − − MHz Cobo − − 4.5 SMALL− SIGNAL CHARACTERISTICS Current −Gain − Bandwidth Product (IC = 10 mA, VCE = 5.0 Vdc, f = 100 MHz) Output Capacitance (VCB = 10 V, f = 1.0 MHz) Noise Figure (IC = 0.2 mA, VCE = 5.0 Vdc, RS = 2.0 kW, f = 1.0 kHz, BW = 200 Hz) NF BC846A,B, BC847A,B,C, BC848A,B,C BC849B,C, BC850B,C pF dB − − − − 10 4.0 Product parametric performance is indicated in the Electrical Characteristics for the listed test conditions, unless otherwise noted. Product performance may not be indicated by the Electrical Characteristics if operated under different conditions. www.onsemi.com 2 BC846ALT1G Series BC846A, BC847A, BC848A, SBC846A 300 300 VCE = 1 V VCE = 5 V 150°C hFE, DC CURRENT GAIN hFE, DC CURRENT GAIN 150°C 200 25°C 100 −55°C 0 200 25°C 100 −55°C 0 0.001 0.01 1 0.1 0.001 0.01 1 0.1 IC, COLLECTOR CURRENT (A) IC, COLLECTOR CURRENT (A) Figure 1. DC Current Gain vs. Collector Current Figure 2. DC Current Gain vs. Collector Current VCE(sat), COLLECTOR−EMITTER SATURATION VOLTAGE (V) 0.18 0.16 IC/IB = 20 150°C 0.14 0.12 25°C 0.10 0.08 0.06 −55°C 0.04 0.02 0 0.0001 0.001 0.01 0.1 IC, COLLECTOR CURRENT (A) Figure 3. Collector Emitter Saturation Voltage vs. Collector Current 0.9 VBE(on), BASE−EMITTER VOLTAGE (V) VBE(sat), BASE−EMITTER SATURATION VOLTAGE (V) 1.0 −55°C IC/IB = 20 0.8 25°C 0.7 0.6 150°C 0.5 0.4 0.3 0.2 0.0001 0.001 0.01 0.1 1.2 VCE = 5 V 1.1 1.0 −55°C 0.9 0.8 25°C 0.7 0.6 150°C 0.5 0.4 0.3 0.2 0.0001 0.001 0.01 IC, COLLECTOR CURRENT (A) IC, COLLECTOR CURRENT (A) Figure 4. Base Emitter Saturation Voltage vs. Collector Current Figure 5. Base Emitter Voltage vs. Collector Current www.onsemi.com 3 0.1 BC846ALT1G Series BC846A, BC847A, BC848A, SBC846A 1.0 θVB, TEMPERATURE COEFFICIENT (mV/ °C) VCE , COLLECTOR-EMITTER VOLTAGE (V) 2.0 TA = 25°C 1.6 IC = 200 mA 1.2 IC = IC = 10 mA 20 mA IC = 50 mA IC = 100 mA 0.8 0.4 0 0.02 10 0.1 1.0 IB, BASE CURRENT (mA) -55°C to +125°C 1.2 1.6 2.0 2.4 2.8 20 10 C, CAPACITANCE (pF) 5.0 TA = 25°C Cib 3.0 Cob 2.0 1.0 0.4 0.6 0.8 1.0 2.0 20 4.0 6.0 8.0 10 VR, REVERSE VOLTAGE (VOLTS) 100 Figure 7. Base−Emitter Temperature Coefficient 40 f, T CURRENT-GAIN - BANDWIDTH PRODUCT (MHz) Figure 6. Collector Saturation Region 7.0 10 1.0 IC, COLLECTOR CURRENT (mA) 0.2 Figure 8. Capacitances 400 300 200 VCE = 10 V TA = 25°C 100 80 60 40 30 20 0.5 0.7 1.0 2.0 3.0 5.0 7.0 10 20 IC, COLLECTOR CURRENT (mAdc) 30 Figure 9. Current−Gain − Bandwidth Product www.onsemi.com 4 50 BC846ALT1G Series BC846B, SBC846B 600 VCE = 1 V 150°C 500 hFE, DC CURRENT GAIN hFE, DC CURRENT GAIN 600 400 25°C 300 200 −55°C 100 0 VCE = 5 V 150°C 500 400 25°C 300 200 −55°C 100 0 0.001 0.01 1 0.1 0.001 0.01 1 0.1 IC, COLLECTOR CURRENT (A) IC, COLLECTOR CURRENT (A) Figure 10. DC Current Gain vs. Collector Current Figure 11. DC Current Gain vs. Collector Current VCE(sat), COLLECTOR−EMITTER SATURATION VOLTAGE (V) 0.30 IC/IB = 20 150°C 0.25 0.20 25°C 0.15 0.10 −55°C 0.05 0 0.0001 0.001 0.01 0.1 IC, COLLECTOR CURRENT (A) Figure 12. Collector Emitter Saturation Voltage vs. Collector Current 1.0 IC/IB = 20 VBE(on), BASE−EMITTER VOLTAGE (V) VBE(sat), BASE−EMITTER SATURATION VOLTAGE (V) 1.1 −55°C 0.9 25°C 0.8 0.7 150°C 0.6 0.5 0.4 0.3 0.2 0.0001 0.001 0.01 0.1 1.2 VCE = 5 V 1.1 1.0 −55°C 0.9 0.8 25°C 0.7 0.6 150°C 0.5 0.4 0.3 0.2 0.0001 0.001 0.01 IC, COLLECTOR CURRENT (A) IC, COLLECTOR CURRENT (A) Figure 13. Base Emitter Saturation Voltage vs. Collector Current Figure 14. Base Emitter Voltage vs. Collector Current www.onsemi.com 5 0.1 BC846ALT1G Series 2.0 1.0 θVB, TEMPERATURE COEFFICIENT (mV/ °C) VCE , COLLECTOR-EMITTER VOLTAGE (VOLTS) BC846B, SBC846B TA = 25°C 1.6 20 mA 50 mA 100 mA 200 mA 1.2 IC = 10 mA 0.8 0.4 0 0.02 0.05 0.1 0.2 0.5 1.0 2.0 IB, BASE CURRENT (mA) 5.0 10 1.4 1.8 qVB for VBE 2.6 3.0 20 0.2 Figure 15. Collector Saturation Region f, T CURRENT-GAIN - BANDWIDTH PRODUCT C, CAPACITANCE (pF) TA = 25°C 20 Cib 10 6.0 2.0 Cob 0.1 0.2 1.0 2.0 10 20 0.5 5.0 VR, REVERSE VOLTAGE (VOLTS) 50 0.5 10 20 50 1.0 2.0 5.0 IC, COLLECTOR CURRENT (mA) 100 200 Figure 16. Base−Emitter Temperature Coefficient 40 4.0 -55°C to 125°C 2.2 VCE = 5 V TA = 25°C 500 200 100 50 20 1.0 5.0 10 50 100 IC, COLLECTOR CURRENT (mA) 100 Figure 17. Capacitance Figure 18. Current−Gain − Bandwidth Product www.onsemi.com 6 BC846ALT1G Series BC847B, BC848B, BC849B, BC850B, SBC847B, SBC848B 600 VCE = 1 V 150°C 500 hFE, DC CURRENT GAIN hFE, DC CURRENT GAIN 600 400 25°C 300 200 −55°C 100 0 VCE = 5 V 150°C 500 400 25°C 300 200 −55°C 100 0 0.001 0.01 1 0.1 0.001 0.01 1 0.1 IC, COLLECTOR CURRENT (A) IC, COLLECTOR CURRENT (A) Figure 19. DC Current Gain vs. Collector Current Figure 20. DC Current Gain vs. Collector Current VCE(sat), COLLECTOR−EMITTER SATURATION VOLTAGE (V) 0.30 IC/IB = 20 0.25 150°C 0.20 25°C 0.15 0.10 −55°C 0.05 0 0.0001 0.001 0.01 0.1 IC, COLLECTOR CURRENT (A) Figure 21. Collector Emitter Saturation Voltage vs. Collector Current VBE(sat), BASE−EMITTER SATURATION VOLTAGE (V) 1.0 IC/IB = 20 VBE(on), BASE−EMITTER VOLTAGE (V) 1.1 −55°C 0.9 25°C 0.8 0.7 150°C 0.6 0.5 0.4 0.3 0.2 0.0001 0.001 0.01 0.1 1.2 VCE = 5 V 1.1 1.0 −55°C 0.9 0.8 25°C 0.7 0.6 150°C 0.5 0.4 0.3 0.2 0.0001 0.001 0.01 IC, COLLECTOR CURRENT (A) IC, COLLECTOR CURRENT (A) Figure 22. Base Emitter Saturation Voltage vs. Collector Current Figure 23. Base Emitter Voltage vs. Collector Current www.onsemi.com 7 0.1 BC846ALT1G Series BC847B, BC848B, BC849B, BC850B, SBC846B, SBC847B, SBC848B 1.0 θVB, TEMPERATURE COEFFICIENT (mV/ °C) VCE , COLLECTOR-EMITTER VOLTAGE (V) 2.0 TA = 25°C 1.6 IC = 200 mA 1.2 IC = IC = 10 mA 20 mA IC = 50 mA IC = 100 mA 0.8 0.4 0 0.02 10 0.1 1.0 IB, BASE CURRENT (mA) -55°C to +125°C 1.2 1.6 2.0 2.4 2.8 20 10 C, CAPACITANCE (pF) 5.0 TA = 25°C Cib 3.0 Cob 2.0 1.0 0.4 0.6 0.8 1.0 2.0 20 4.0 6.0 8.0 10 VR, REVERSE VOLTAGE (VOLTS) 100 Figure 25. Base−Emitter Temperature Coefficient 40 f, T CURRENT-GAIN - BANDWIDTH PRODUCT (MHz) Figure 24. Collector Saturation Region 7.0 10 1.0 IC, COLLECTOR CURRENT (mA) 0.2 Figure 26. Capacitances 400 300 200 VCE = 10 V TA = 25°C 100 80 60 40 30 20 0.5 0.7 1.0 2.0 3.0 5.0 7.0 10 20 IC, COLLECTOR CURRENT (mAdc) 30 Figure 27. Current−Gain − Bandwidth Product www.onsemi.com 8 50 BC846ALT1G Series BC847C, BC848C, BC849C, BC850C, SBC847C 1000 1000 VCE = 1 V 150°C 700 600 VCE = 5 V 900 150°C 800 hFE, DC CURRENT GAIN hFE, DC CURRENT GAIN 900 25°C 500 400 300 −55°C 200 100 800 700 600 25°C 500 400 −55°C 300 200 100 0 0 0.001 0.01 1 0.1 0.001 0.01 1 0.1 IC, COLLECTOR CURRENT (A) IC, COLLECTOR CURRENT (A) Figure 28. DC Current Gain vs. Collector Current Figure 29. DC Current Gain vs. Collector Current VCE(sat), COLLECTOR−EMITTER SATURATION VOLTAGE (V) 0.30 IC/IB = 20 0.25 150°C 0.20 25°C 0.15 0.10 −55°C 0.05 0 0.0001 0.001 0.01 0.1 IC, COLLECTOR CURRENT (A) Figure 30. Collector Emitter Saturation Voltage vs. Collector Current VBE(sat), BASE−EMITTER SATURATION VOLTAGE (V) 1.0 IC/IB = 20 VBE(on), BASE−EMITTER VOLTAGE (V) 1.1 −55°C 0.9 25°C 0.8 0.7 150°C 0.6 0.5 0.4 0.3 0.2 0.0001 0.001 0.01 0.1 1.2 VCE = 5 V 1.1 1.0 −55°C 0.9 0.8 25°C 0.7 0.6 150°C 0.5 0.4 0.3 0.2 0.0001 0.001 0.01 IC, COLLECTOR CURRENT (A) IC, COLLECTOR CURRENT (A) Figure 31. Base Emitter Saturation Voltage vs. Collector Current Figure 32. Base Emitter Voltage vs. Collector Current www.onsemi.com 9 0.1 BC846ALT1G Series BC847C, BC848C, BC849C, BC850C, SBC847C 1.0 θVB, TEMPERATURE COEFFICIENT (mV/ °C) VCE , COLLECTOR-EMITTER VOLTAGE (V) 2.0 TA = 25°C 1.6 IC = 200 mA 1.2 IC = IC = 10 mA 20 mA IC = 50 mA IC = 100 mA 0.8 0.4 0 0.02 10 0.1 1.0 IB, BASE CURRENT (mA) -55°C to +125°C 1.2 1.6 2.0 2.4 2.8 20 10 C, CAPACITANCE (pF) 5.0 TA = 25°C Cib 3.0 Cob 2.0 1.0 0.4 0.6 0.8 1.0 2.0 20 4.0 6.0 8.0 10 VR, REVERSE VOLTAGE (VOLTS) 100 Figure 34. Base−Emitter Temperature Coefficient 40 f, T CURRENT-GAIN - BANDWIDTH PRODUCT (MHz) Figure 33. Collector Saturation Region 7.0 10 1.0 IC, COLLECTOR CURRENT (mA) 0.2 Figure 35. Capacitances 400 300 200 VCE = 10 V TA = 25°C 100 80 60 40 30 20 0.5 0.7 1.0 2.0 3.0 5.0 7.0 10 20 IC, COLLECTOR CURRENT (mAdc) 30 Figure 36. Current−Gain − Bandwidth Product www.onsemi.com 10 50 BC846ALT1G Series 1 IC, COLLECTOR CURRENT (A) IC, COLLECTOR CURRENT (A) 1 100 mS 10 mS 1 mS 1S 0.1 Thermal Limit 0.01 100 mS 10 mS 1 mS 0.1 1S Thermal Limit 0.01 0.001 0.001 1 10 0.1 100 1 10 100 VCE, COLLECTOR EMITTER VOLTAGE (V) VCE, COLLECTOR EMITTER VOLTAGE (V) Figure 37. Safe Operating Area for BC846A, BC846B Figure 38. Safe Operating Area for BC847A, BC847B, BC847C, BC850B, BC850C IC, COLLECTOR CURRENT (A) 1 100 mS 10 mS 1 mS 1S 0.1 Thermal Limit 0.01 0.001 0.1 1 10 VCE, COLLECTOR EMITTER VOLTAGE (V) Figure 39. Safe Operating Area for BC848A, BC848B, BC848C, BC849B, BC849C www.onsemi.com 11 100 BC846ALT1G Series ORDERING INFORMATION Device Marking Package Shipping† 1A SOT−23 (Pb−Free) 3,000 / Tape & Reel 1A SOT−23 (Pb−Free) 10,000 / Tape & Reel 1B SOT−23 (Pb−Free) 3,000 / Tape & Reel 1B SOT−23 (Pb−Free) 10,000 / Tape & Reel SOT−23 (Pb−Free) 3,000 / Tape & Reel SOT−23 (Pb−Free) 10,000 / Tape & Reel 1F SOT−23 (Pb−Free) 3,000 / Tape & Reel 1F SOT−23 (Pb−Free) 10,000 / Tape & Reel 1G SOT−23 (Pb−Free) 3,000 / Tape & Reel 1G SOT−23 (Pb−Free) 10,000 / Tape & Reel 1J SOT−23 (Pb−Free) 3,000 / Tape & Reel 1K SOT−23 (Pb−Free) 3,000 / Tape & Reel 1K SOT−23 (Pb−Free) 10,000 / Tape & Reel SOT−23 (Pb−Free) 3,000 / Tape & Reel SOT−23 (Pb−Free) 10,000 / Tape & Reel SOT−23 (Pb−Free) 3,000 / Tape & Reel SOT−23 (Pb−Free) 10,000 / Tape & Reel SOT−23 (Pb−Free) 3,000 / Tape & Reel SOT−23 (Pb−Free) 10,000 / Tape & Reel BC846ALT1G SBC846ALT1G* BC846ALT3G BC846BLT1G SBC846BLT1G* BC846BLT3G SBC846BLT3G* BC847ALT1G BC847ALT3G 1E BC847BLT1G SBC847BLT1G* BC847BLT3G NSVBC847BLT3G* BC847CLT1G SBC847CLT1G* BC847CLT3G BC848ALT1G BC848BLT1G SBC848BLT1G* BC848BLT3G BC848CLT1G BC848CLT3G 1L BC849BLT1G BC849BLT3G 2B BC849CLT1G BC849CLT3G 2C BC850BLT1G NSVBC850BLT1G* 2F SOT−23 (Pb−Free) 2G SOT−23 (Pb−Free) 3,000 / Tape & Reel BC850CLT1G NSVBC850CLT1G* †For information on tape and reel specifications, including part orientation and tape sizes, please refer to our Tape and Reel Packaging Specifications Brochure, BRD8011/D. *S and NSV Prefix for Automotive and Other Applications Requiring Unique Site and Control Change Requirements; AEC−Q101 Qualified and PPAP Capable. www.onsemi.com 12 BC846ALT1G Series PACKAGE DIMENSIONS SOT−23 (TO−236) CASE 318−08 ISSUE AP NOTES: 1. DIMENSIONING AND TOLERANCING PER ANSI Y14.5M, 1982. 2. CONTROLLING DIMENSION: INCH. 3. MAXIMUM LEAD THICKNESS INCLUDES LEAD FINISH THICKNESS. MINIMUM LEAD THICKNESS IS THE MINIMUM THICKNESS OF BASE MATERIAL. 4. DIMENSIONS D AND E DO NOT INCLUDE MOLD FLASH, PROTRUSIONS, OR GATE BURRS. D SEE VIEW C 3 HE E DIM A A1 b c D E e L L1 HE q c 1 2 b 0.25 e q A L A1 MIN 0.89 0.01 0.37 0.09 2.80 1.20 1.78 0.10 0.35 2.10 0° MILLIMETERS NOM MAX 1.00 1.11 0.06 0.10 0.44 0.50 0.13 0.18 2.90 3.04 1.30 1.40 1.90 2.04 0.20 0.30 0.54 0.69 2.40 2.64 −−− 10 ° MIN 0.035 0.001 0.015 0.003 0.110 0.047 0.070 0.004 0.014 0.083 0° INCHES NOM 0.040 0.002 0.018 0.005 0.114 0.051 0.075 0.008 0.021 0.094 −−− MAX 0.044 0.004 0.020 0.007 0.120 0.055 0.081 0.012 0.029 0.104 10° STYLE 6: PIN 1. BASE 2. EMITTER 3. COLLECTOR L1 VIEW C SOLDERING FOOTPRINT* 0.95 0.037 0.95 0.037 2.0 0.079 0.9 0.035 SCALE 10:1 0.8 0.031 mm Ǔ ǒinches *For additional information on our Pb−Free strategy and soldering details, please download the ON Semiconductor Soldering and Mounting Techniques Reference Manual, SOLDERRM/D. ON Semiconductor and are registered trademarks of Semiconductor Components Industries, LLC (SCILLC). SCILLC owns the rights to a number of patents, trademarks, copyrights, trade secrets, and other intellectual property. A listing of SCILLC’s product/patent coverage may be accessed at www.onsemi.com/site/pdf/Patent−Marking.pdf. SCILLC reserves the right to make changes without further notice to any products herein. SCILLC makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does SCILLC assume any liability arising out of the application or use of any product or circuit, and specifically disclaims any and all liability, including without limitation special, consequential or incidental damages. “Typical” parameters which may be provided in SCILLC data sheets and/or specifications can and do vary in different applications and actual performance may vary over time. All operating parameters, including “Typicals” must be validated for each customer application by customer’s technical experts. SCILLC does not convey any license under its patent rights nor the rights of others. SCILLC products are not designed, intended, or authorized for use as components in systems intended for surgical implant into the body, or other applications intended to support or sustain life, or for any other application in which the failure of the SCILLC product could create a situation where personal injury or death may occur. Should Buyer purchase or use SCILLC products for any such unintended or unauthorized application, Buyer shall indemnify and hold SCILLC and its officers, employees, subsidiaries, affiliates, and distributors harmless against all claims, costs, damages, and expenses, and reasonable attorney fees arising out of, directly or indirectly, any claim of personal injury or death associated with such unintended or unauthorized use, even if such claim alleges that SCILLC was negligent regarding the design or manufacture of the part. SCILLC is an Equal Opportunity/Affirmative Action Employer. This literature is subject to all applicable copyright laws and is not for resale in any manner. PUBLICATION ORDERING INFORMATION LITERATURE FULFILLMENT: Literature Distribution Center for ON Semiconductor P.O. Box 5163, Denver, Colorado 80217 USA Phone: 303−675−2175 or 800−344−3860 Toll Free USA/Canada Fax: 303−675−2176 or 800−344−3867 Toll Free USA/Canada Email: [email protected] N. American Technical Support: 800−282−9855 Toll Free USA/Canada Europe, Middle East and Africa Technical Support: Phone: 421 33 790 2910 Japan Customer Focus Center Phone: 81−3−5817−1050 www.onsemi.com 13 ON Semiconductor Website: www.onsemi.com Order Literature: http://www.onsemi.com/orderlit For additional information, please contact your local Sales Representative BC846ALT1/D