F-213 FTM–125–02–L–DV FTMH–116–02–L–DV–P TM FTMH–111–02–F–DV–ES–A EXTENDED LIFE PRODUCT (1,00 mm) .0394" 10 year Mixed Flowing Gas with 30µ" Gold Call Samtec for maximum cycles FTMH, FTM SERIES SMT MICRO TERMINAL STRIPS SPECIFICATIONS Mates with: CLM, MLE Optional Pick & Place pads For complete specifications and recommended PCB layouts see www.samtec.com?FTMH or www.samtec.com?FTM Insulator Material: Black Liquid Crystal Polymer Terminal Material: Phosphor Bronze Current Rating: FTMH = 2.5A per contact @ 80°C ambient FTM = 1.5A per contact @ 80°C ambient Operating Temp Range: -55°C to +125°C Plating: Sn or Au over 50µ" (1,27 µm) Ni RoHS Compliant: Yes Low profile (1,79 mm) .071" Surface Mount Processing: Lead-Free Solderable: Yes -DV Lead Coplanarity: (0,10 mm) .004" max -DH Lead Coplanarity: (0,10 mm) .004" max (05-25) (0,15 mm) .006" max (26-50) TYPE STRIP APPLICATION SPECIFIC OPTION FTMH = 05 thru 50 FTMH End shrouds with board locks available. Molded end shrouds available for 05 through 08 positions. Call Samtec. = SMT Micro = Micro Low Profile 02 No. of positions x (1,00) .03937 –L –03 = (1,65 mm) .065" Post (Mates with CLM) = 10µ" (0,25 µm) Gold on post, Matte Tin on tail (1,91) .075 DIA OPTION B – ES (1,57) .062 (4,06) .160 (5,49) .216 – EC FTMH –F = Gold flash on post, Matte Tin on tail FTMH 100 (3,17) .125 01 –02 = (1,91 mm) .075" Post (Mates with MLE) FTM = 02 thru 50 (unshrouded) = 05 thru 46 (shrouded) FTM PLATING OPTION LEAD STYLE NO. PINS PER ROW 1 99 – EP No. of positions x (1,00) .03937 + B (3,84) .151 FTMH LEAD STYLE – 02 – 03 (1,22) .048 –ES OPTION A – EP OPTION –EC OPTION (1,91) .075 (1,65) .065 (1,00) .03937 (0,30) .012 SQ TYP (3,10) .122 (4,32) .170 A (3,18) .125 X (5,08) .200 (5,00) .197 A (1,80) .071 (1,49) .059 Shrouded option removed for clarity Note: Some lengths, styles and options are non-standard, non-returnable. (5,21) .205 –DV OPTION WWW.SAMTEC.COM (0,69) .027 (2,59) .102 –DH OPTION (0,64) .025 DIA –A OPTION (3,18) .125 –P OPTION FTMH–128–03–L–DV–EP FTMH–122–02–F–DV–EC FTMH–135–02–F–DH FTMH–120–02–L–DV FTM–125–02–L–DV Low Profile (1,27 mm) .050" Surface mount Shrouded and alignment pin options available Flex Shroud options available ROW OPTION (FTMH-DV only with 9 pins/row minimum) –DV = Dual Vertical –ES –DH 02 –EC = End Shroud with Locking Clip (Manual placement required) 50 (FTM only) –A –S = Alignment Pin (3 positions minimum) Metal or plastic at Samtec discretion (FTMH–DV only) = End Shroud (05 positions minimum). Molded or press fit shroud at Samtec’s discretion (See assembly print at www.samtec.com?FTM for dimensions) = End Shroud = Dual Horizontal (FTMH only) –EP 01 –K = (2,50 mm) .098" DIA Polyimide Film Pick & Place Pad (FTMH–DH only) –SA (3,18) = End Shroud with Guide Post .125 (Use only when mating with CLM) (5,21) .205 –P = End Shroud with Alignment Pins (05 through 46 positions) = Plastic Pick & Place Pad (–DV only) (6 positions minimum) 49 FTM FTM No. of positions x (1,00) .03937 + C 02 46 OPTION C –S (7,00) .276 (4,00) .157 – SA (3,23) (4,44) .127 .175 01 –TR FTM LEAD STYLE – 02 – 03 (0,97) .038 OTHER OPTIONS FLEX SHROUD OPTIONS = Tape & Reel D (1,91) .075 (1,65) .065 (2,54) .100 x (5,08) .200 45 (0,30) .012 SQ TYP D No of positions x (1,00) .03937 Shrouded options removed for clarity (1,27) .050 –DV OPTION (1,40) (3,56) .055 .140 (1,00) .039 DIA (3,56) .140 –S OPTION (1,50) .059 –SA OPTION WWW.SAMTEC.COM (3,18) .125 –P OPTION