240MHz SAW Filter 59MHz Bandwidth China Electronics Technology Group Corporation No.26 Research Institute SIPAT Co., Ltd. Part Number: LBN24005 www.sipatsaw.com Features For IF SAW filter High attenuation Single-ended operation Dual In-line Package No matching required for operation at 50Ω RoHS compliant (2002/95/EC), Pb-free Specifications Parameter Unit Minimum Typical Maximum Center Frequency MHz 239.7 240 240.3 Insertion Loss dB - 34.1 35 1.5 dB Bandwidth MHz - 59.1 - 3 dB Bandwidth MHz 59.4 59.43 - 12dB Bandwidth MHz - 60.38 - 25dB Bandwidth MHz - 61.05 61.2 45dB Bandwidth MHz - 62.55 - Passband Variation dB - 0.7 1.5 Absolute Delay usec - 1.3 - Ultimate Rejection(f0±35MHz) dB 35 38 - Material Temperature coefficient KHz/°C -22.6 Substrate Material - YZ LN Ambient Temperature °C 25 Operating Temperature Range °C DC Voltage V Input Power dBm ESD Class - -25 - +85 0 - - 10 1A DIP2212 (22.2x12.8x4.7mm3) Package Size Notes: 1. All specifications are based on the test circuit shown; 2. In production, all specifications are measured by Agilent Network analyzer and full 2 port calibration at room temperature; 3. Electrical margin has been built into the design to account for the variations due to temperature drift and manufacturing tolerances; 4. This is the optimum impedance in order to achieve the performance show. SIPAT Co., Ltd. ( CETC No.26 Research Institute ) #14 Nanping Huayuan Road, Chongqing, China, 400060 Tel: +86-23-62808818 Part Number LBN24005 Rev. Date 2011-05-23 Ver. 1.0 Fax: +86-23-62808382 Page www.sipatsaw.com / [email protected] 1/3 240MHz SAW Filter 59MHz Bandwidth China Electronics Technology Group Corporation No.26 Research Institute SIPAT Co., Ltd. Part Number: LBN24005 www.sipatsaw.com Matching Configuration INPUT 50 OUTPUT 50 5 1 Source/Load Impedance=50 ohm Notes - Component values may change depending on board layout. Package Dimension 22.20 0.50 Pad Configuration: 12.80 0.50 SIPAT LBN24005 XXYYZZ 5 1) SIPAT: Manufacturer Name 2) LBN24005: Part Number 3) XXYY: Date(Year/month) 4) ZZ: Identified Code 5 6 1 7.62 0.50 4 3 2 2.54 0.20 Package: DIP2212 Unit: mm SIPAT Co., Ltd. ( CETC No.26 Research Institute ) #14 Nanping Huayuan Road, Chongqing, China, 400060 Tel: +86-23-62808818 Output Marking Configuration: 2.54±0.20 12.70 0.50 1 Ground 2,3,4,6 4.20 0.50 4.90 0.50 0.45 0.05 Input Part Number LBN24005 Rev. Date 2011-05-23 Ver. 1.0 Fax: +86-23-62808382 Page www.sipatsaw.com / [email protected] 2/3 240MHz SAW Filter 59MHz Bandwidth China Electronics Technology Group Corporation No.26 Research Institute SIPAT Co., Ltd. Part Number: LBN24005 www.sipatsaw.com Typical Performance Frequency Response Passband Response Type Performance Type Performance -24.1111 -32.6111 -34.1111 -33.1111 -44.1111 -33.6111 -54.1111 -34.1111 Amplitude ripple(dB) -74.1111 -84.1111 -34.6111 -35.1111 -94.1111 -35.6111 -104.1111 -36.1111 -114.1111 -124.1111 140 160 180 200 220 240 Frequency(MHz) 260 Horizontal: 20MHz/Div 280 300 320 -36.6111 180 340 Vertical: 10dB/Div 200 220 240 Frequency(MHz) 260 Horizontal: 20MHz/Div Group Delay Variation(f0±29MHz) 280 300 Vertical: 0.5dB/Div Phase Linearity(f0±29MHz) Type Performance Type Performance 1450 40 30 1400 20 1350 X: 211 Y: 5.21 10 X: 240 Y: 1305 X: 211 Y: 1303 1300 Degree(deg) Group Delay Time(ns) X: 269 Y: 1281 1250 X: 240 Y: -1.315 0 X: 269 Y: 5.554 -10 -20 -30 1200 -40 230 240 Frequency(MHz) 250 Horizontal: 10MHz/Div 260 270 280 -50 190 290 Vertical: 50ns/Div 200 210 220 230 +j2.0 280 290 Vertical: 10deg/Div 0.5 0.2 2.0 0.0 ∞ ∞ -j5.0 -j0.2 -j2.0 -j0.5 +j5.0 +j0.2 -j5.0 -j0.2 +j2.0 +j0.5 +j5.0 +j0.2 1.0 270 +j1.0 +j0.5 0.5 260 Smith Chart S22 +j1.0 -j2.0 -j0.5 -j1.0 -j1.0 SIPAT Co., Ltd. ( CETC No.26 Research Institute ) #14 Nanping Huayuan Road, Chongqing, China, 400060 Tel: +86-23-62808818 250 Horizontal: 10MHz/Div Smith Chart S11 0.0 240 Frequency(MHz) 5.0 220 2.0 210 1.0 200 5.0 1150 190 0.2 Magnitude(dB) -64.1111 Part Number LBN24005 Rev. Date 2011-05-23 Ver. 1.0 Fax: +86-23-62808382 Page www.sipatsaw.com / [email protected] 3/3