Emerson Network Power CJ70S-47 Military, space and testing equipment Datasheet

PRODUCT CATALOG
Military, Space and
Testing Equipment
Emerson Network Power Connectivity Solutions has a wide range of cable assemblies and connectors suited for RF,
Microwave and Fiber Optic signal transmission. Connectivity Solutions is a vertically integrated supplier of custom, fixed
length and semi-rigid cable assemblies from DC to 50 GHz. Our product lines deliver custom-engineered products and
solutions to satisfy the most demanding and complex requirements.
Aim-Cambridge has a universal line of products that offer cost effective, high quality solutions for
connectivity. Our connectors are available in BNC, Type N, F Type, RCA, UHF, Mini-UHF, TNC, D-Sub
and Modular Plugs for Data/Telecom applications. In addition, we stock a wide variety of cables for
A/V, SATV, CATV, computer and LAN applications, as well as a complete line of termination tools
and structured cabling products. AIM-Cambridge promises that its product will provide you with
unmatched consistency, quality, reliability and ease of use.
Johnson designs and manufactures an industry leading line of RF coaxial connectors and adapters,
which are available in both 50 and 75 ohm versions. Johnson connectors are designed to provide the
highest quality data transmission for audio, video and data applications. The Johnson line of products
can address frequency ranges from DC to 46GHz and all sizes from Ultra-miniature interfaces (UMC),
Micro-miniature, (MCX, MMCX, SMP), Subminiature (SMA, SMB, SMK, kwiQMAte™), Medium
connectors (Type N connectors) through to large connectors (DIN7/16). The breadth of products
available within the Johnson range includes board and cable mount connectors as well as semi-rigid,
conformable, and flexible RF coaxial cables.
Midwest Microwave manufacturers passive coaxial microwave components that are known for their
precision performance and high quality that meets the precise requirements of the RF/Microwave
industry. Our broad product portfolio includes: Attenuators, Precision Adapters, Terminations, DC
Blocks, Power Dividers, Couplers, Equalizers, Phase Shifters, Connectors, Custom Cable Assemblies
and Test Cables that are designed and manufactured for both military and commercial applications.
Midwest also offers a wide variety of Qualified Product List (QPL) approved products in the M3933,
M39030 and M39012 series, as well as many DESC/DSCC approved models.
Semflex designs and manufactures low loss, flexible, microwave coaxial cable and custom cable
assemblies for the military/aerospace, commercial OEM and test instrumentation markets. Semflex
offers cables ranging from DC to 50 GHz, available with ultra low insertion loss, power ratings up to
21 KW, and available with all popular connectors.
Stratos optical connectivity products is globally recognized as highly reliable, cost-effective, and
provides optical connectivity solutions that are virtually immune to dust, mud, oil, water, and other
contaminants.
Our expanded beam connectivity products are ideal for harsh environment applications in the
broadcast, industrial, petrochemical and military/aerospace markets where high reliability, low
maintenance and quick serviceability are critical requirements. Our optical active products are used
mainly in military, aerospace and industrial markets where high speed/high reliable performance is
mission critical. The actives product line includes optical transceivers, optical media converters and
custom devices tailored to your application.
Trompeter is recognized as a global leader in delivering best in class RF connectivity products. The
Trompeter line of patch jacks, RF connectors, cable assemblies, HDTV digital technology and DS3
connectivity solutions is unrivalled. Our mission is to provide products that continually deliver the
highest quality signal integrity for the most demanding applications in Telecom, Central Office,
Broadcast, Military Aerospace, and Instrumentation markets worldwide. Our extensive line of costeffective products are rigorously designed and tested to provide the critically engineered solutions
necessary to enhance the end-user’s overall experience.
Vitelec provides a comprehensive range of RF coaxial interconnect products and cable assemblies.
The company has a long established reputation for offering quality and innovation with a wide range
of both standard and custom designed products for the electronic and communication industries.
Contents
TWINAX/TRIAX CONNECTORS
Mil-Std-1553B Data Bus General Specifications Guide
2-3
70/370 SERIES
MIL-C-49142 QPL’d Connectors
TRB/TRT Miniature Plugs & Jacks
TRB/TRT Miniature Bulkhead Jacks
Miniature Circuit Board Jacks
TRB Series Pad, Paralleling Jacks, & T Adapter
Twinax/Triax Terminations & RFI Caps
Miniature Twinax/Triax Patching
Miniature Twinax/Triax Normal-Thru Patch Jacks
Subminiature Twinax/Triax Patching
Standard & Subminiature Twinax/Triax Looping Plugs
Hermetically Sealed Connectors
Mating Twinax Size 8 Contacts
5
6
7
8
9
10
11-12
13
14
15
16
17
150/3150 SERIES
TRS/TTM Subminiature Jacks and Plugs
TRS/TTM Subminiature Bulkhead Jacks
Subminiature Bulkhead Jacks, Adapters, & Push-on
18
19-20
20
450 SERIES
Concentric Twinax Connectors
21-23
TPS/TCM Subminiature Coax Threaded Jacks & Plugs
80/380 SERIES
TRC/TRN Standard Twinax/Triax Threaded
24
30/330 SERIES
TWBNC/TWTNC, Two-pin Polarized Connectors
25
COAX CONNECTORS
26
20/220 SERIES
Miniature Coax BNC Plugs & Jacks
Miniature Coax BNC Bulkhead Jacks
Coax Circuit Board Jacks
130 Series Coax F Type Connectors
Low VSWR Coax Connectors
27
28
29-31
250 SERIES
Mini-BNC Coax Plugs & Jacks
32
40/240 SERIES
TNC Miniature Coax Threaded
TNC Bulkhead Jacks, Miniature Coax Threaded
33
34
120 SERIES
BNC/TNC Miniature Push-on Jacks & Plugs
35
1.0/2.3 DIN CONNECTORS
36
1.6/5.6 DIN CONNECTORS
Miniature Coax DIN Connectors
Coaxial Ground Filter Bulkhead Jacks
37
37
TYPE N CONNECTORS
90 Series Coax Type N Connectors
38
39-40
41
42
PATCHING PRODUCTS
High Frequency Video Patching
Coax Patch Jacks & Accessories
Mini-WECo Coax Patch Plugs
Mini-WECo Coax Patch Jacks
Standard Coax Patching & Looping
50Ω Miniature Coax Patching
Panel Specifications
Distribution Panels
Standard/Miniature Panels
“D” Mounting Hole Specifications
43-44
45-46
47
48
49
50
51
52
53-54
54
CUSTOM CABLE ASSEMBLIES
55-56
TERMINATIONS & RFI CAPS
Coax Terminations & RFI Caps
Chain Options
Stainless Steel Rope for “D” Ring Option
ADAPTERS (CUSTOM AND STANDARD)
Adapter Circuitry Schematics
Coax to Coax Adapter Table
Coax/Twinax/Triax Adapter Table
57
57
57
58
59
60-61
TOOLS & ACCESSORIES
Cable Strippers
Crimp Tools
Cable Assembly Testers
Tool Kit/Bulk Packaging
62
63
64
65
APPENDIX
Trompeter Cable Specifications
Twinax/Triax: Plenum/Halogen Free Cable Specs
Connector Compatibility Table
General Material/ Finish Specifications
BNC Coax Tool/Wrench Crimp Assembly Illustrations
Cable Group Table Notes
Cable Group Tables
66-68
68
69-70
71
72
73
74-91
INDEX
Part Number Index
Terms & Conditions
93-95
96-97
1
TWINAX/TRIAX CONNECTORS
Twinax/Triax Connectors / Specifications
Trompeter offers a broad line of connectors manufactured to
meet or exceed the Mil-Specs governing twinax connectors. In
fact, Mil-PRF-49142 was created from the Trompeter concentric
twinax/triax connector design.
The following information reflects the specification requirements
for each family of connectors in both twinax and triax applications.
Use this chart to determine the proper connector type to be used
in your application, based on the environment and electrical
requirements of your design. Trompeter’s technical support team
is available to answer any specification questions you may have.
MIL-Spec Triax
Series
Trompeter
Connector
Series
Bayonet Typical Lug Count
Available
Threaded
Gender
Equivalent Coax
Series
TRB
70
3
Yes
Normal
BNC
TRC
80
2
Yes
Reverse
N
TRS
150
3
Yes
Normal
M-BNC
1553
450
3
Yes
Either
n/a
The following is the latest list from the
MIL-STD-1553B supply:
Trompeter Number:
PL75-47
PL375C-201
PL75C-201
PL155AC-201
PL3155AC-201
PL155AC-201
PL155AC-201
PL3455ACS-201
PL455ACP-201
MIL-STD-1553B Data Bus General Specifications Guide
Characteristic Requirements
70 Series
TRB/TRT
80 Series
TRC/TRN
150 Series
TRS/TTM
450 Series
TCS
Nominal Impedance
Non-constant
Non-constant
Non-constant
Non-constant
Frequency Range
0-500 MHz
0-500 MHz
0-500 MHz
0-2 MHz
Voltage Rating (max.) @ sea level
400 VRMS
500 VRMS
400 VRMS
900 VRMS
Voltage Rating (max.) @ 70,000 ft.
100 VRMS
125 VRMS
100 VRMS
N/A
Insulation Resistance
5000 MΩ
5000 MΩ
5000 MΩ
5000 MΩ
Dielectric Withstanding Voltage
(between center cond. & inter. cond.)
1200 VRMS
1500 VRMS
1200 VRMS
900 VAC
Dielectric Withstanding Voltage
(between inter. cond. & outer cond.)
500 VRMS
500 VRMS
500 VRMS
900 VAC
RF High Potential Withstanding Voltage
(between center cond. & inter. cond.)
800 VRMS
1000 VRMS
500 VRMS
900 VAC @ 60 Hz
RF High Potential Withstanding Voltage
(between inter. & outer cond.)
200 VRMS
@ 5-7.5 MHz
350 VRMS
@ 5-7.5 MHz
125 VRMS
N/A
Specifications continued on page 3...
* Specifications are minimum unless otherwise stated. Trompeter connectors are designed to exceed all minimum specifications.
2
Twinax/Triax Connectors / Specifications
3
MIL-STD-1553B Data Bus General Specifications Guide (cont’d)
70 Series
TRB/TRT
80 Series
TRC/TRN
150 Series
TRS/TTM
450 Series
TCS
Corona Level (min.)
200 VRMS
@ 70,000 ft.
375 VRMS
@ 70,000 ft.
125 VRMS
@ 70,000 ft.
250 VAC
@ 50,000 ft.
Rise Time Degradation (max.)
400 rs
N/A
800 ps
800 ps
Permeability of Nonmagnetic Material
<2.0 mu except hermetic versions
Hermetic Seal
(Where Applicable)
<1 x 10-8 cc/sec
<1 x 10-6 cc/sec
N/A
Connector Durability
500 cycles minimum @ 12 cycles per minute max.
Temperature Range
-65° to +165°C
-65° to +165°C
-65° to +200°C
-65° to 125°C
Force to Engage and Disengage
Longitudinal (max.)
Torque (max.)
4 pounds
2.5 inch-pounds
5 pounds
4 inch-pounds
4 pounds
2.5 inch-pounds
3 pounds
2.5 inch-pounds
Center Contact Retention
Axial Force (min.)
Plug
Jack
6 pounds
6 pounds
6 pounds
6 pounds
4 pounds
2 pounds
6 pounds
6 pounds
Coupling Proof Torque
(Threaded types only)
15 inch-pounds
15 inch-pounds
10 inch-pounds
N/A
Coupling Mechanism Retention Force
(min.)
100 pounds
100 pounds
70 pounds
100 pounds
Cable Retention Force (min.)
40 pounds
.200-.325 inch
cable OD
65 pounds
.242-.419 inch
cable OD
40 pounds
.120-.215 inch
cable OD
40 pounds
.120-.180 inch
cable OD
Characteristic Requirements
Salt Spray (corrosion)
N/A
48 hrs minimum exposure (Standard nickel plating)
500 hrs minimum available (Call customer service for plating types). Standard for 450 Series.
Total 240 hour minimum exposure
Thermal Shock (5 cycles)
(No physical damage/Pass DWV)
Total 5 hours 50 minutes min -65°C to +85°C
Specified Shock (sawtooth waveform,
within peak - 50g’s, duration -11ms)
No discontinuity allowed. Velocity-change of shock pulse 10% of ideal value
Vibration, High-frequency (36 cycles)
(15g peak, 10-2000 Hz-10Hz in 20 minutes)
Total 12 hour minimum. No physical damage or loosening of parts.
No discontinuity allowed.
* Specifications are minimum unless otherwise stated. Trompeter connectors are designed to exceed all minimum specifications.
-65°C to +125°C
TWINAX/TRIAX CONNECTORS
Moisture Resistance (10 cycles)
TWINAX/TRIAX CONNECTORS
Twinax/Triax Connectors
Built to Last
Premium Quality
Superior Mechanical Performance
Rugged Physical Properties
Extreme Reliability
Signals require protection from extraneous noise through nonsignal carrying shielding. These interfacing connectors must
provide contact surfaces isolated from each other, as well as from
the outer shield. Trompeter twinaxial/triaxial connectors are
designed with two (2) concentric contacts that are isolated from
each other and the shielding connection.
Features
• All metallic parts are machined/formed to extremely close
tolerances
• All bodies are made of top quality brass with bright nickelplated non-tarnish finish
• Fully enclosed, heat-treated, beryllium-copper outer
conductor spring (not half hard slotted brass)
• Heat-treated, beryllium-copper center socket contact with 50
millionths inch gold plating
70 Series
Miniature Threaded (TRT)
These concentric twinax/triax connectors are ideal for applications
where weight is not a primary concern. They are commonly used
in digital data bus, video pair, MIL-STD-1553B (airborne/ground,
primary/redundant), base-band circuit and any application for
“noise-free guarded” circuits.
(70 Series shown below)
Features
Miniature 2, 3, 4–lug, and Push-on (TRB)
370 Series
• Same size as BNC/TNC connectors. Large body versions are
available to accommodate larger cables
• Field serviceable, wrench crimp versions for cables with up to
.475” outer diameters
• Tool crimp versions for quick termination of cables with up to
.250” outer diameters
• 3-lug, 4-lug, and threaded versions provide different levels of
mechanical stability and keying
• Does not require mechanical alignment for mating.
• QPL to MIL-C-49142 (see list on page 5)
• Meets MIL-C-49142, 48-hour salt spray requirement
• Special plating available to satisfy MIL-STD-1344, 500-hour
• salt spray requirement
• Push-on versions for test cable applications
• Fewer pieces to assemble
• Hermetically sealed versions are available (page 16)
4
Twinax/Triax Connectors / 70/370 Series Connectors
Qualified Parts List (QPL) to MIL-C-49142
5
MIL-C-49142 Qualified Products List
Trompeter has always been a leader in twinax connector design
and development. This time we’ve designed a new connector
style to meet the requirements of MIL-C-49142, Category G.
What is Category G? It is the section of the MIL-Spec that requires
tool crimping of the TRB (70) series connectors. We are also
qualified to category A which is for wrench crimp TRB connectors.
Below is a list of qualified Trompeter products from the Defence
Electronic Supply Center (DESC). QPL parts must be ordered by
the MIL-Number. Many of Trompeter’s 70 Series concentric twinax
connectors are QPL to MIL-C-49142. QPL versions are silver plated
and can be ordered using the Government Designation part
numbers listed. Corresponding standard nickel plated connectors
can be ordered using the standard part numbers.
Trompeter Number
Mil-number
Trompeter Number
M49142/03-0001
M49142/03-0002
M49142/03-0005
M49142/03-0007
M49142/03-0008
M49142/03-0009
M49142/03-0011
M49142/03-0016
M49142/03-0017
M49142/03-0101
M49142/03-0102
M49142/03-0105
M49142/03-0107
M49142/03-0108
M49142/03-0109
M49142/03-0111
M49142/03-0116
M49142/03-0117
M49142/03-0201
M49142/03-0202
M49142/03-0205
M49142/03-0207
M49142/03-0208
M49142/03-0209
M49142/03-0211
M49142/03-0216
M49142/03-0217
M49142/04-0004
M49142/04-0104
M49142/04-0204
M49142/05-0001
M49142/05-0002
M49142/05-0006
M49142/05-0007
M49142/05-0008
M49142/05-0009
M49142/05-0011
M49142/05-0016
M49142/05-0017
M49142/05-0101
M49142/05-0102
M49142/05-0106
M49142/05-0107
M49142/05-0108
M49142/05-0109
M49142/05-0111
M49142/05-0116
M49142/05-0117
M49142/05-0201
M49142/05-0202
M49142/05-0206
M49142/05-0207
M49142/05-0208
M49142/05-0209
M49142/05-0211
M49142/05-0216
M49142/05-0217
PL75-7
PL75-7
305-0042-1
PL75-9
PL75-47
PL75-60
305-0811-1
PL75MC213
PL75MC-201
PL75Y-7
PL75Y-7
305-0042Y-1
PL75Y-9
PL75Y-47
PL75Y-60
305-0811Y-1
PL75MCY-213
PL75MCY-201
PL75S-7
PL75S-7
305-0042S-1
PL75S-9
PL75S-47
PL75S-60
305-0811S-1
PL75MCS-213
PL75MCS-201
BJ76
BJ76Y
BJ76S
BJ79-7
BJ79-7
305-0042-7
BJ79-9
BJ79-47
BJ79-60
305-0811-3
BJ79MC-213
BJ79MC-201
BJ79Y-7
BJ79Y-7
305-0042Y-7
BJ79Y-9
BJ79Y-47
BJ79Y-60
305-0811Y-3
BJ79MCY-213
BJ79MCY-201
BJ79S-7
BJ79S-7
305-0042S-7
BJ79S-9
BJ79S-47
BJ79S-60
305-0811S-3
BJ79MCS-213
BJ79MCS-201
M49142/06-0001
M49142/06-0002
M49142/06-0006
M49142/06-0007
M49142/06-0008
M49142/06-0009
M49142/06-0011
M49142/06-0016
M49142/06-0017
M49142/06-0101
M49142/06-0102
M49142/06-0106
M49142/06-0107
M49142/06-0108
M49142/06-0109
M49142/06-0111
M49142/06-0116
M49142/06-0117
M49142/06-0201
M49142/06-0202
M49142/06-0206
M49142/06-0207
M49142/06-0208
M49142/06-0209
M49142/06-0211
M49142/06-0216
M49142/06-0217
M49142/08-0001
M49142/08-0002
M49142/08-0005
M49142/08-0006
M49142/08-0008
M49142/08-0010
M49142/08-0011
M49142/08-0016
M49142/08-0017
M49142/09-0001
M49142/09-0002
M49142/09-0006
M49142/09-0007
M49142/09-0009
M49142/09-0011
M49142/09-0012
M49142/09-0016
M49142/09-0017
M49142/10-0001
M49142/11-0001
M49142/11-0002
M49142/11-0006
M49142/11-0007
M49142/11-0009
M49142/11-0011
M49142/11-0012
M49142/11-0016
M49142/11-0017
CJ70-7
CJ70-7
305-0042-4
CJ70-47
CJ70-9
CJ70-60
305-0811-2
CJ70MC-213
CJ70MC-201
CJ70Y-7
CJ70Y-7
305-0042Y-4
CJ70Y-47
CJ70Y-9
CJ70Y-60
305-0811Y-2
CJ70MCY-213
CJ70MCY-201
CJ70S-7
CJ70S-7
305-0042S-4
CJ70S-47
CJ70S-9
CJ70S-60
305-0811S-2
CJ70MCS-213
CJ70MCS-201
PL375-7
PL375-7
305-0042-9
PL375-47
PL375-60
305-0811-5
305-0486-1
PL375MC-213
PL375MC-201
BJ379-7
BJ379-7
BJ379-47
305-0042-11
BJ379-60
305-0811-7
305-0486-3
BJ379MC-213
BJ379MC-201
BJ376
CJ370-7
CJ370-7
CJ370-47
305-0042-12
CJ370-60
305-0811-6
305-0486-2
CJ370MC-213
CJ370MC-201
TWINAX/TRIAX CONNECTORS
Mil-number
TWINAX/TRIAX CONNECTORS
Twinax/Triax Connectors / Miniature Plugs & Jacks
70/370 Series, TRB/TRT
Cable Plug
Cable Plug
Tool Crimp
Military Crimp Tool
2–Lug.................................... PL74C3–Lug.................................... PL75C4–Lug.................................... PL75CFLThreaded............................... PL375C-
3–Lug.................................... PL75MC2–Lug.................................... PL74MC4–Lug.................................... PL75MCFLThreaded............................... PL375MC-
* Length depends on Cable Group
1.70
1.70 OR 1.44 MAX
1.297
1.297
PL74C-202 Shown
PL75MC-202 Shown
For polarizations, call customer service.
SEALING
SLEEVE
SHRINKABLE
STRAIN RELIEF
.593 DIA MAX
.593
DIA MAX
Cable Plug
Cable Plug
1.135
Wrench Crimp
Tool Crimp, Push-on
.096
SHRINKABLE SEALING SLEEVE (LONG)
SHRINKABLE STRAIN RELIEF (CLEAR, 175°C)
PL73C-
2–Lug............................ PL743–Lug............................ PL754–Lug............................ PL75FLThreaded....................... PL375-
.500
DIA
.438 HEX
.500 BODY DIA
.438 WRENCH FLATS
.593 MAX DIA OVER KNURL
1.267
.030
1.67
PL74-9 Shown
Cable Plug
PL73C-202 Shown
1.110
.438 WRENCH FLATS
Wrench Crimp, Push-on
Cable Jack
1.314
.096
Wrench Crimp
PL73-
.500
DIA
Order Large Body version for cables with
jacket dia. greater than .323".
3–Lug........................... CJ702–Lug........................... CJ70TL4–Lug........................... CJ70FLThreaded...................... CJ370-
.096
.438 WRENCH FLATS
PL73-9 Shown
.438HEX
.500 BODY DIA
.500 WRENCH FLATS
.593 DIA MAX OVER KNURL
CJ70-9 Shown
Right Angle Cable Plug
Cable Jack
Tool Crimp
Tool Crimp
2–Lug........................... PLR74C3–Lug........................... PLR75C4–Lug........................... PLR75CFLThreaded...................... PLR375C-
3–Lug........................... CJ70C2–Lug........................... CJ70CTL4–Lug........................... CJ70CFLThreaded...................... CJ370C-
1.76 MAX
SHRINKABLE SEALING SLEEVE (LONG)
1.405
PLR74C-201 Shown
1.11
.030
SHRINKABLE
STRAIN RELIEF
(CLEAR, 175ºC)
SHRINKABLE
SEALING
SLEEVE
(LONG)
For cable groups
201-223 only. Contact
customer service for
other cables.
.546
DIA
MAX
1.416
.030
SHRINKABLE
STRAIN RELIEF
(CLEAR, 175º C)
1.800
.593
DIA
MAX
Right Angle TRB Adapter
CJ70C-202 Shown
TRB Coupling Adapter
1.110
Barrel Connector
TRB Male to Female
3–Lug......................... ADRMF70
2–Lug......................... ADRMF70TL
Threaded.................... ADRMF370
4–Lug......................... ADRMF70FL
.961
.711
ADRMF70 Shown
Refer to Cable Group Tables, pages 74-91.
6
3–Lug........................... AD78
2–Lug........................... AD78TL
4–Lug........................... AD78FL
Threaded...................... AD378
1.290
.445 DIA
AD78 Shown
Twinax/Triax Connectors / Miniature Bulkhead Jacks
70/370 Series, TRB/TRT
Bulkhead Jack
Bulkhead Jack
Front Mount, Solder Pot
Tool Crimp
3–Lug.................................... BJ770
2–Lug.................................... BJ77TL
4–Lug.................................... BJ77FL
Threaded............................... BJ377
3–Lug.................................... BJ79C2–Lug.................................... BJ79CTL4–Lug.................................... BJ79CFLThreaded............................... BJ379C-
.500 HEX NUT
.500-28UNEF-2A
.625 HEX NUT
.4375-28UNEF-2A TYP
.892
SHRINKABLE SEALING SLEEVE(LONG)
.687 DIA
BJ79C Shown
For polarizations, contact
customer service.
Mounting Hole: D3.109
SOLDER POT ACCEPTS
.036 DIA CONDUCTOR
.380
.562 DIA
DIA
BJ377 Shown
(Hermetically sealed version available,
pg.16)
Mounting Hole: D4.125
.600 DIA
.062
.487
7
COLOR
BAND
1.146
.030
1.80 MAX
SHRINKABLE
STRAIN RELIEF
(CLEAR, 175°C)
1.122
Feed-Thru Bulkhead Jack
.562 HEX NUT
.4375-28UNEF-2A TYP
.500-28UNEF-2A
3–Lug................................ BJ78
2–Lug................................ BJ78TL
4–Lug................................ BJ78FL
Threaded........................... BJ378
.730
DIA
BJ378 Shown
(Hermetically sealed version available, pg.16)
Mounting Hole: D3.187
.775
1.290
Bulkhead Solder Pot
1.314
3–Lug..................... BJ792–Lug..................... BJ79TL4–Lug..................... BJ79FLThreaded................ BJ379-
.800
.437
HEX
ACCEPTS .036 DIA
CONDUCTOR
.687 .750
DIA DIA
1.065
.110
.840
1.365
.865
.090
3–Lug........................ BJ75
2–Lug........................ BJ75TL
4–Lug........................ BJ75FL
Threaded................... BJ375
.414
MIN
.800
DIA
.625-24UNEF-2A
BJ75 Shown
Mounting Hole: D2.140
1.312
.437 WRENCH FLATS
.687 DIA
.500-28UNEF-2A
.4375-28UNEF-2A
.625 HEX NUT
Rear Mount, Solder Pot
.500-28UNEF-2A
.096
.722
Insulated Bulkhead Jack
.625 HEX NUT
3–Lug........................ BJ76
2–Lug........................ BJ76TL
4–Lug........................ BJ76FL
Threaded................... BJ376
Wrench Crimp
BJ379-7 Shown
Mounting Hole: D3.160
.062 DIA
Rear Mount, Solder Pot
Bulkhead Cable Jack
ACCEPTS
.041 DIA CONDUCTOR
.750 HEX NUT
BJ76 Shown
Mounting Holes: D3.240 w/o solder lug/D3.208 w/ solder lug
Insulated Bulkhead Cable Jack
Insulated Bulkhead Cable Jack
Wrench Crimp
Tool Crimp
3–Lug........................................... BJ74C2–Lug........................................... BJ74CTL4–Lug........................................... BJ74CFLThreaded...................................... BJ374C-
3–Lug.............................................. BJ742–Lug.............................................. BJ74TL4–Lug.............................................. BJ74FLThreaded......................................... BJ374-
.414
MIN
.096
BJ74-9 Shown
Mounting Hole: D2.140
.866
.437 HEX
.750 HEX NUT
BJ74C-202 Shown
.800
DIA
Mounting Hole: D2.140
.414
MIN
.500 WRENCH FLATS
.625-24 UNEF-2A
.030
1.416
1.800
Insulated Feed-Thru Jack
Wrench Crimp
3–Lug............................... BJ73
2–Lug............................... BJ73TL
4–Lug............................... BJ73FL
Threaded.......................... BJ373
BJ73 Shown
Mounting Hole: D2.140
1.290
.414
MIN
.090
Insulated Bulkhead Jack
.414
MIN
.515
.090
Front Mount
.800
DIA
.625-24UNEF-2A
.750 HEX NUT
Refer to Cable Group Tables, pages 74-91.
“D” mounting holes see page 54. For polarizations, contact customer service.
3–Lug............................... BJ72
2–Lug............................... BJ72TL
4–Lug............................... BJ72FL
Threaded.......................... BJ372
BJ72 Shown
Mounting Hole: D2.140
.750 HEX NUT
.625-24UNEF-2A
ACCEPTS
.036 DIA
CONDUCTOR
.414
MIN
1.365
TWINAX/TRIAX CONNECTORS
.625-24UNEF-2A
SHRINKABLE SEALING SLEEVE (LONG)
SHRINKABLE
STRAIN RELIEF
(CLEAR, 175°C)
.750 HEX NUT
1.314
.775
TWINAX/TRIAX CONNECTORS
Twinax/Triax Connectors / Miniature Circuit Board Jacks
70/370 Series
Twinax/Triax TRB Concentric
Twinax/Triax TRB Non-Insulated Bulkhead Jack
Circuit Board Jack
Concentric Female 3-Lug Bulkhead Mount
3–Lug.............................................. CBJ70
2–Lug.............................................. CBJ70TL
4–Lug.............................................. CBJ70FL
(TRT) Threaded................................ CBJ370
3–Lug.......................................... CBBJ79
2–Lug.......................................... CBBJ79TL
4–Lug.......................................... CBBJ79FL
Threaded..................................... CBBJ379
1.388
.425
.156
TYP
.557
1.000
.156
.013
.100
.100
.300
.500 DIA
.425
.0625 DIA
2 PLACES
.150
TYP
.200
.013
.0625 DIA, 2 PLACES
.100 .200
CBJ70 Shown
.300
.380
DIA
CBBJ79 Shown
Mounting Hole: D3.109
.100
.400
TYP
.0700 DIA
4 PLACES
.0935 DIA
4 PLACES
.128
.562 HEX NUT
.109 MAXIMUM PANEL THICKNESS
Twinax/Triax TRB Right Angle Concentric
Twinax/Triax TRB Insulated Bulkhead Jack
Circuit Board Jack
Concentric Female 3-Lug, Bulkhead Mount
3–Lug.............................................. CBJR70, CBJR70A
MODEL
LTR
A
NO.
CODE DIM
CBJR70
.24
CBJR70A
A
.34
B
DIM
.050
.058
C
DIM
.090
.090
3–Lug.............................................. CBBJ74
1.388
D
DIM
.0625
.070
.750
HEX
NUT
.557
.090
.013
.425
.0625 DIA
D DIA TYP
.156
.200
.0625 DIA, 2 PLACES
1.216
.200
1.042
.258
A
.050
.380
TYP
.100
.380
DIA
.100
.030 TYP
.100
.258
.400
TYP
.0935 DIA
4 PLACES
.625-24UNEF-2A
.13 TYP
.258
TYP
Mounting Hole: D2.109
B TYP
C TYP
.100
Right Angle Circuit Board Bulkhead Jack
Right Angle Insulated Circuit Board Bulkhead Jack
Standard Version
Insulated Version
3–Lug.............................................. CBBJR79
2–Lug.............................................. CBBJR79TL
4–Lug.............................................. CBBJR79FL
Threaded......................................... CBBJR379
3–Lug.............................................. CBBJR74
2–Lug.............................................. CBBJR74TL
4–Lug.............................................. CBBJR74FL
Threaded......................................... CBBJR374
MODEL
LTR A
B
C
D
E
NO.
CODE DIM DIM DIM DIM DIM
CBBJR79
.24 .565 .050 .090 .0625
CBBJR79A
A
.34 .665 .058 .090 .070
MODEL
LTR
A
B
NO.
CODE DIM DIM
CBBJR74
.345 .778
CBBJR74A A
.445 .878
MAX PANEL THICKNESS .140
1.216
D
DIM
.0625
.070
1.324
1.042
.718
C
DIM
.050
.058
1.153
.050
.785
.090
A
A
B
.380
DIA
.380
DIA
.030 TYP
B
.030 TYP
.500-28UNEF-2A
.562 HEX NUT
CBBJR79 Shown
Mounting Hole: D3.125
.13 TYP
.258 TYP
.124
C TYP
.625-24UNEF-2A
.750 HEX NUT
.124
C TYP
D TYP
.090 TYP
.100
* FOR MODEL
.100
E DIA TYP
# 305-0789
DIA = .0410
D DIA TYP
.258
TYP
.0625 DIA
.0625 DIA
.258
.050
.050
.100
Add “A” for tall versions example: CBBJR74A
“D” mounting holes see page 54.
.258
TYP
.258
.100
8
CBBJR74 Shown
Mounting Hole: D2.140
.13 TYP
.258 TYP
Twinax/Triax Connectors / TRB Series Pad
Paralleling/T Adapter
9
Fixed Paralleling Jacks
TRB Series Pad
TRB 3-Lug Plug and Jack
Fixed Paralleling Jack
2.683
Two Plugs, One Jack
.593
DIA
MAX
.593
DIA
MAX
PL75
R
Part Number
CJ70
3–Lug.............................................. TN2
2–Lug.............................................. TN2TL
4–Lug.............................................. TN2FL
Threaded......................................... TN2T
Circuitry Schematic
2.673
R1
TNG2-R
R
R2
.625 1.166
R1
R
TNG3-R
R2
TN2 Shown
R-Resistance (½W 1%)
Substitute resistive value for each "RN" unless all values are identical.
Fixed Paralleling Jack
R
R1
Two Jacks, One Plug
3–Lug.............................................. TN2A
2–Lug.............................................. TN2TLA
4–Lug.............................................. TN2FLA
Threaded......................................... TN2TA
R2
TRB “T” Adapter
1
3–Lug..............................................
BN73
R1RR
2
2–Lug..............................................
BN73TL
R2
R3
4–Lug..............................................
BN73FL
TRT “T” Adapter
2.673
INTERMEDIATE
R1 R2
R3R1 R2
1.166
R4
Threaded.........................................
BN373
.625
R5R3 R6
.593
R1DIA R2
OVER KNURL
R3
R4
R5
1.075
R6
TN2A Shown
BN73 Shown
.440
.425 TYP
* Other options available including Random Paralleling.
Contact customer service for more information.
.436
1.286
Triax Parallel Network
305-0138
TWINAX/TRIAX CONNECTORS
For Adapters, see pages 58-61. For Terminations, see page 57.
TWINAX/TRIAX CONNECTORS
Twinax/Triax Connectors / RFI Caps & Terminations
Twinax/Triax Terminators and RFI (Dust
Caps)
Trompeter provides Terminations and RFI caps versions of many
of our twinax/triax connectors. Resistors are normally 1/8 watt for
subminiature connectors and 1/2 watt for miniature and standard
size connectors, with 1% tolerances for all.
Parts to be capped
Description
Terminator
RFI (Dust Cap)
BJ30/CJ30 Series
TWBNC Jack
TNGT1-(3)-R
RFI25-(3)
BJ70/CJ70 Series
TRB, Jack
TNG1-(3)-R
RFI75-(3)
BJ70FL/CJ70FL
TRB, Jack
TNGFL1-(3)-R
RFI75FL-(3)
BJ70TL/CJ70TL
TRB, Jack
TNGTL1-(3)-R
RFI75TL-(3)
BJ80/CJ80
TRC, Jack
TNGL1-(3)-R
RFI85-(3)
BJ150/CJ150
TRS, Jack
TNGM1-(3)-R
RFI155-(3)
BJ150FL/CJ150FL
TRS, Jack
TNGMFL1-(3)-R
RFI155FL-(3)
BJ375/CJ370
TRT, Jack
TNT1-(3)-R
RFI375-(3)
BJ375/CJ370
TRT, Jack
TNTS1-(3)-R (Safety Holes)
RFI375-(3)
BJ380/CJ380
TRN, Jack
TNTL1-(3)-R
RFI385-(3)
BJ803/CJ803
TRC, 3-lug Jack
TNG3L1-(3)
RFI853-(3)
BJ3150/CJ3150
TTM, Jack
TNTM1-(3)-R
RFI3155-(3)
J72
Twinax Patch Jack
TPT-(3)-R
RFI70-(3)
J72L
Twinax Patch Jack
TPTL-(3)-R
RFI70-(3)
J152
Twinax Submin. Patch Jack
TPTWM-(3)-R
RFI150-(3)
PL30
TWBNC, Plug
TNGBJT1-(3)-R
RFI21-(3)
PL74
TRB, Plug
TNGBJTL1-(3)-R
RFI77TL-(3)
PL75
TRB, Plug
TNGBJ1-(3)-R
RFI77-(3)
PL75FL
TRB, Plug
TNGBJFL1-(3)-R
RFI77FL-(3)
PL80
TRC, Plug
TNGLF1-(3)-R
RFI80-(3)
PL803
TRC, Plug
TNGLF3L1-(3)-R
RFI80(3)
PL380
TRN
TNTLF1-(3)-R
RFI80(3)
PL150
Submin. Patch Plug
TJTWM-(3)-R
-
PL155
TRS, Plug
RFI157-(3)
PL155
TRS, Plug
TNGBJM1-(3)-R (Bulkhead
Mount)
TNGMF1-(3)-R
PL155FL
TRS, Plug
RFI157FL-(3)
PL155FL
TRS, Plug
TNGBJMFL1-(3) (Bulkhead
Mount)
TNGMFFL1-(3)-R
PL3155
TTM, Plug
RFI3157-(3)
PL3155
TTM, Plug
TNTBJM1-(3)-R (Bulkhead
Mount)
TNTMF1-(3)-R
PL350
TCM, Plug
RFI157FL-(3)
RFI3157-(3)
RFI357-(3)
PL375
TRT, Plug
TNTBJ1-(3)-R (Bulkhead Mount)
RFI377-(3)
PL375
TRT, Plug
TNTF1-(3)-R
RFI377-(3)
PL380
TRN, Plug
TNTLF1-(3)-R
RFI380-(3)
PL803
TRC, 3-lug, Plug
TNGLF3L1-(3)-R
RFI803-(3)
For 450/3450 Series:
Concentric Twinax
See pages 22-23
See pages 22-23
Notes:
(3) = Chain options, see page 63.
“R” = Resistance
For Chain Options and Ordering Instructions, see page 57.
10
RFI157-(3)
Twinax/Triax Connectors / Miniature Patching & Cable Assemblies
Patch Jack
Patch Cord
TRB 3-Lug
Patch Plug to Patch Plug
J72
Twinax............................................ PTW-L-Z
Triax................................................ PTR-L-Z
.156 DIA MTG HOLE
11
"L"
LENGTH
1.268
.570
.375
.812
.281
Cable Assembly
.445
DIA
.380
DIA
TRB 3-Lug Plug to Patch Plug
Twinax......................................... PTWX-L-Z
Triax............................................ PTRX-L-Z
.562
"L"
LENGTH
Patch Jack
Cable Assembly
Shielded
TRB 3-Lug Plugs
Without Hood............................... J72D
With Hood..................................... J72S-
Twinax......................................... PTWY-L-Z
Triax............................................ PTRY-L-Z
.156 DIA
MTG HOLE
.4375-28UNEF-2A
Bend relief available, call customer service.
"L"
LENGTH
.375
.812
.447
DIA
.281
.562
1.735
.437 WRENCH
FLATS
.500 HEX
.570
Parallel Patch Cord
Twinax......................................... PTWS-L-Z
Triax............................................ PTRS-L-Z
.610
.570
.445
DIA
.187
2.594
.156 DIA
MTG HOLE
.4375-28UNEF-2A
"L"
Length
in inches
Patch Plug
PL71-
.375
.812
.445
DIA
1.337
.281
.575
.610
PL71-7 Shown
.505
DIA
1.735
.437 WRENCH FLATS
.543 DIA MAX
Termination
.562
.437
WRENCH FLATS
1.880
TPT-1-R
RFI Cap
RFI 70-1
.437 WRENCH FLATS
For patch jack, no chain
For other chain options see page 58.
Refer to Cable Group Tables, pages 74-91.
Panels are on pages 51-54.
R = Resistance, 50, 75, 78 and 124 ohm standard
L = Length in Inches, 6, 12, 24, 36, 48, 60 standard
Z = Impedance in Ohms, 50, 75, 78 and 124 ohm standard
TWINAX/TRIAX CONNECTORS
.570
.374 DIA
TWINAX/TRIAX CONNECTORS
Twinax/Triax Connectors / Miniature Patching
Twinax Patch Plug
Twinax Patch Cord
PL71L-
Twinax......................................... PTWYL-L-Z
Triax............................................ PTRYL-L-Z
2.514
1.689
"L"
LENGTH
.500
DIA
.374
.437 WRENCH FLATS
.437 FLATS
.513 DIA MAX
Twinax Patch Jack
Looping Plug
TRB 3-Lug
Twinax.......................................... LPTWL-Z
Triax.............................................. LPTRL--Z
J72L
3.969
2.660
.156 DIA MTG HOLE
.374
DIA TYP
.570
TROMPETER
ELECTRONICS
.375
.812
.445
DIA
.380
DIA
2.250
1.20 .625
LPTWL-78 Shown
.281
.560
Front-loading Modular Panels
For use with J74MST-R Patch Jacks (pg. 13)
1.404
1.000
TYP
.688
TYP
STD. 2 DSI (.580 WIDE)
.450 DIA THRU
JSISM-60
Panel Dimensions
Modules/Panels
Jacks/Module
Jacks/Panel
Part Number
19”x3.483”
1.046
10
2
20
155-0830-1 (JSISM-60)
19”x2.34”
3.483
.750
40
JSISM-120
.625
M
10 S
4
2.650
L
.420
1.404
1.000
TYP
1.404
JSISM-60.330 MAX
.688
TYP
.660
STD. 2 DSI (.580 WIDE)
.450 DIA THRU
3.483
.625
.625
.750
.625
1.046
.750
2.077
M
1.000
M
S
2.218
2.608
L
4.826
M
L
S
.420
L
.330 MAX
.660
2.077
.330 MAX TYP
R-Resistance (½W, 1%), Z-Denotes Cable Impedance.
12
.204
5.234
2.650
S
JSISM-120
Standard and Sub-miniature Panels, see pages 53-54.
.450 DIA THRU
120 HOLES
.660
2.077
Twinax/Triax Connectors / Miniature Normal-Thru Patch Jacks
J74 Series
13
Monitor-Terminated Patch Jack
Use with Front Loading Modular Panels, see page 12.
J74MST-R
.156 DIA MTG HOLE
.445 DIA TYP
BNC
RECEPTACLES
.750
1.897
2.125
2.409
.625
TRB
.487
.570
.562
2.660
J74MST-R SCHEMATIC
Monitor-Terminated
Plugging into the source side provides a resistive load to
the monitored side. Separate 20 dB isolator jack and
TRB input jacks for monitoring of the normal-thru signal.
Trompeter’s superior J74 Series of twinax/triax patch jacks
provide a normal-thru signal path without the use of looping
plugs or patch cords. Same body size as our J24 Series coax dual
patch jacks.
It offers a self-wiping, self-normalizing switch with gold plated
beryllium copper contacts, which provides positive electrical
contact with 30,000 minimum mating cycles.
All metallic parts are machined, formed, or die-casted to
extremely close tolerances which provide better intermateability
improving EMI/RFI suppression and reduced signal loss. The TRB/
TRT patch jack bodies are made of top-quality brass with a bright
nickel-plated, non-tarnish finish, which resists tarnishing and
the associated reduction of conductivity. Dielectrics are made
of machined PTFE for superior dielectric properties and heat
resistance. When you want performance and long-life, these
patch jacks are what you need.
Normal-Thru Patch Jack
Self-terminating
J74T-R
Provides a resistive load to the unused side of the jack. Insertion
of a patch plug into the source side automatically terminates the
load side. Plugging into the load side automatically terminates the
source side.
Dual Patch Jack
Normally-terminated
J74-2T-R
Provides a resistive load.
.445 DIA TYP
TRB
.156 DIA TYP MTG HOLE
BNC RECEPTACLES
1.659
1.375
1.148
.625
2.660
J74T-R
Self-Terminating
Provides a resistive load to the unused side of the jack.
Insertion of a patch plug into the source side automatically
terminates the load side. Plugging into the load side
automatically terminates the source side.
J74-2T-R
Normally-Terminated
Provides a resistive load.
R-Resistance (½W, 1%). For standard panels see page 51.
TWINAX/TRIAX CONNECTORS
.487
.570
.562
TWINAX/TRIAX CONNECTORS
Twinax/Triax Connectors / Subminiature Patching
Subminiature Patch Plug
Subminiature Normal Through Twinax/Triax Patch
Jack
PL150-
Smallest twinax/triax patch jack
1.300
J158
.264
.377
.375 WRENCH FLATS
.375 HEX
.468 DIA MAX
1.090
1.340
Subminiature Patch Jack
.970
.500
.347
TYP
Cable Entry Mount on JSIX panels (For panels see pages 51-54)
0.129 TYP
J150-
TRS RECEPTACLE
1.769
.468
1.250
.264
SCHEMATIC
.347
DIA
Patch Cord
Subminiature patch plug to subminiature patch plug
.375 WRENCH FLATS
Triax 50Ω, 75Ω................................................................ PTRM-L-Z
Twinax 75Ω, 124Ω......................................................... PTWM-L-Z
Subminiature Patch Jack
"L"
LENGTH
TRS 3-lug
J152
1.209
.128 MTG HOLE
.295
Cable Assembly
.264
.308
J152 Shown
.638
.347
DIA
.218
Subminiature patch plug to TRS 3-lug plug, 4-lug/threaded versions available
Triax 50Ω, 75Ω.............................................................. PTRMX-L-Z
Twinax 75Ω, 124Ω....................................................... PTWMX-L-Z
"L"
LENGTH
.436
RFI Cap
Cable Assembly
For subminiature patch jack, no chain.
TRS* 3-lug plug to TRS* 3-lug plug, 4-lug/threaded versions available
RFI 150-1
Triax 50Ω, 75Ω.............................................................. PTRMY-L-Z
Twinax 75Ω, 124Ω....................................................... PTWMY-L-Z
1.275
"L"
LENGTH
For other chain options see
.3/8 WRENCH FLATS
3/8 HEX
.443 DIA MAX
-2 SHOWN
Cable Assembly
Metal junction, random paralleling
TRS* 3-lug plugs, 4-lug/threaded versions available
Termination
For TRS* 3-lug jack, no chain.
Twinax 78Ω, 124Ω, Triax 50Ω, 75Ω............................ TNM3-Z
TNGM1-1-R
1.131
.460 DIA MAX
.375 WRENCH FLATS
For other chain options see page 63.
*4-lug/threaded versions available
4.50"
Refer to Cable Group Tables, pages 74-91.
14
For JSIX subminiature insulated panels see page 53. Other Terminations and RFI Caps, see page 57.
Twinax/Triax Connectors / Standard & Subminiature Looping Plugs
Standard Looping Plug
Standard Looping Plug
LPTW & LPTR Series
LPLTW & LPLTR Series
Dash #
Model No
-1
-2
-3
-4
LPTW-78
LPTW-124
LPTR-50
LPTR-75
Color
Cable Type
Blue
Twinax
Yellow
Triax
Model No
-1
-3
-4
-5
LPLTW-78
LPLTW-124
LPLTR-50
LPLTR-75
.625
Color
Cable Type
Blue
Twinax
Yellow
Triax
DIA TYP
.374
-+.005
2.825
2.250
+- .010
2.825
1.570
TROMPETER
ELECTRONICS
1.200
+
- .010
Dash #
78
124
50
75
Impd Ω
78
124
50
75
2.250
TROMPETER
ELECTRONICS
DIA TYP
.374
+.005
-
Impd Ω
15
1.000
.590
.540
.560
Standard Looping Plug with TRB Test
Standard Looping Plug
LPTWA, LPLTWA, LPTRA, & LPLTRA Series
LPTWAL, LPLTWAL, LPTRAL, & LPLTRAL Series
Dash #
Model No
-1
-2
-3
-4
-5
-6
-7
-8
LPTWA-78
LPLTWA-78
LPTWA-124
LPLTWA-124
LPTRA-50
LPLTRA-50
LPTRA-75
LPLTRA-75
Color
Type
Blue
Impd Ω
Twinax
78
124
50
Yellow
Triax
75
DIM A
DIM B
Dash #
Model No
.625
1.000
.625
1.000
.625
1.000
.625
1.000
1.20
1.57
1.20
1.57
1.20
1.57
1.20
1.57
-1
-2
-3
-4
-5
-6
-7
-8
LPTWAL-78
LPLTWAL-78
LPTWAL-124
LPLTWAL-124
LPTRAL-50
LPLTRAL-50
LPTRAL-75
LPLTRAL-75
Color
Type
Blue
Impd Ω
78
Twinax
124
50
Yellow
Triax
75
DIM A
DIM B
.625
1.000
.625
1.000
.625
1.000
.625
1.000
1.20
1.57
1.20
1.57
1.20
1.57
1.20
1.57
3.312
+
- .030
.575
+ .030
-
.590
.540
1.689
+.030
-
BJ770
RECEPTACLE
A
+.030
-
2.250
.374
DIA
TYP
A
B
TRB
RECEPTACLE
TROMPETER
ELECTRONICS
TROMPETER
ELECTRONICS
.374 +.005
DIA THRU
B
4.456
+.030
-
2.250
.56
Standard Looping Plug with Two Tip Test Points
LPTW2TPL Series
Standard Looping Plug
LPTWL & LPTRL Series
Dash #
Model No
Impd Ω
Color
-1
LPTW2TPL-78
78
Blue
-2
LPTW2TPL-124
124
Blue
Dash #
Model No
-1
-2
-3
-4
LPTWL-78
LPTWL-124
LPTRL-50
LPTRL-75
Color
Type
Blue
Twinax
Yellow
Impd Ω
Triax
78
124
50
75
3.969 +.030
3.969
.590
.540
.625
.56
Standard Looping Plug with Two Tip Test Points
Standard Looping Plug
LPTW2TP Series
LPLTW2TP Series
Dash #
Model No
Impd Ω
Color
-1
-2
LPTW2TP-78
LPTW2TP-124
78
124
Blue
Blue
Dash #
Model No
Impd Ω
Color
-1
-2
LPLTW2TP-78
LPLTW2TP-124
78
124
Blue
Blue
.560
.590
.540
2.250
+
- .010
1.000
.625
1.570
TROMPETER
ELECTRONICS
1.200
+
- .010
TROMPETER
ELECTRONICS
2.994
+
- .010
2.250
2.994
.169
TWINAX/TRIAX CONNECTORS
.625
.374
DIA
TYP
1.20
TROMPETER
ELECTRONICS
TROMPETER
ELECTRONICS
1.200
±.010
2.250
2.250
±.010
TWINAX/TRIAX CONNECTORS
Twinax/Triax Connectors / Hermetically Sealed Connectors
Concentric Twinax/Triax
Hermetic seals prevent leakage through the bulkhead from inside
of the connector. Trompeter’s miniature size hermetically sealed
connectors include the feed-through BJ78HS, the front mounted
BJ77HS, the rear mounted BJ79HS and BJ379HS. In the subminiature
size we offer the front mounted BJ157HS and BJ157FLHS (four lug
version). The BJ3150HS and BJ3150SHS offer a threaded rear mount
version with a safety wire option. These connectors have leakage
rates of 1x10-8 atm cc/second. The 150 Series have leakage rates of
1x10-6 atm cc/second.
These connectors meet MIL-C-49142 specifications. Standard nonhermetic connector types such as the BJ78 could leak between
the contacts and dielectrics. Hermetically sealed connectors are
designed for bulkhead mounting in vacuum chambers or where
toxic and other gases are present. Hermetic connectors are highly
beneficial in reactors, gas/petro plants, oil drilling sites, liquid test
and measurement, commercial, military, industrial and space
applications. They are reliable under the most severe atmospheric
conditions.
Hermetically Sealed
Bulkhead Jack
.500 HEX NUT
.4375-28UNEF-2A
Front Mount
Features
BJ77HS
• Standard TRB/MIL-C-49142
• Glass to Metal Seals
• Sustains Extreme Temperature Ranges
• Stainless Steel or Nickel Plated Brass Body
• Gold Plated Contacts
.892
.380
.562 DIA
DIA
.15
Mounting Hole: D4.125
.062
.487
.428
.765
Benefits
• Mechanical and Environmentally Reliable Method
• Wide Range of Application Usage
• More Cost Effective than Stainless Steel
• Reliable Connections
Hermetically Sealed
Bulkhead Jack
3-lug.......... BJ157HS
4-lug....... BJ157FLHS
.093 DIA
.375 HEX NUT
.3125-32UNEF-2A
SOLDER POT
ACCEPTS
.727 REF
.034 MAX
DIA
CONDUCTOR
.437 HEX
.469 DIA
GASKET
.402
Hermetically Sealed Bulkhead Jack
Mounting Hole: D6.187
1.050
Subminiature Twinax/Triax
Rear Mount (A=.500)............................. BJ3150HS
Solder Pot Bulkhead (A=.562)................ BJ3150SHS
.4375-28UNEF-2A
A HEX NUT
Hermetically Sealed
Miniature Twinax/Triax
SOLDER POT
ACCEPTS .034
DIA CONDUCTOR
.140 DIA
.892
WIRE HOLE
ACCEPTS .027
DIAMETER
CONDUCTOR
.730 DIA
.562 HEX NUT
.500-28UNEF-2A
Feed-thru Bulkhead Mount
BJ78HS, BJ378HS
Mounting Hole: D4.200
.600 DIA
.100
(Threaded Version Not Shown)
Mounting Hole: D3.187
BJ78HS Shown
Insulated Version
BJ73HS
.750
1.050
(Not Shown)
.775
1.290
Mounting Hole: D2.187
Hermetically Sealed
.56 HEX NUT
Miniature Twinax/Triax
Rear Mount Bulkhead Jack
Hermetically Sealed Bulkhead Jack
Miniature Twinax/Triax TRT/Threaded
BJ376HS
.437 WRENCH
FLATS
Rear Mount, Bulkhead Mount
.500-28UNEF-2A
.625 HEX NUT
.500-28UNEF-2A
.15
BJ79HS
.437 WRENCH
FLATS
Mounting Hole: D3.160
.800
.15
1.09
.690 DIA
Mounting Hole: D3.160
.840
1.09
.690 DIA
“D” mounting holes see page 54.
16
Note: Only a select few of our hermetically sealed connectors are shown here.
Contact customer service for more information.
Twinax/Triax Connectors / 150 Series Intro
Size 8 Mating Contacts
150 Series
Miniature 2, 3, 4-lug, & Push-on (TRS)
3150 Series
Miniature Threaded (TTM)
150/3150 Series are concentric twinax/triax connectors for high
density and weight reduction applications. They are commonly
used in digital data bus, video pair, MIL-STD-1553B (primary/
redundant), baseband circuit and in any application for “noise-free
guarded” circuits. TRS/TTM push-on connectors are designed for
blind mate rack and panel applications. The male plug mates with
any TRS/TTM jack and are ideally suited for test cable applications.
Mating Twinax Size 8 Contacts
for Digital Data Bus Multi-pin Connectors
17
Features
• Same size as TPS/TCM connectors
• Solderable Wrench Crimp versions for cables with up to .215"
outer diameter
• Tool Crimp versions for quick termination of cables with up to
.250" outer diameter
• 3-lug, 4-lug, and threaded versions provide different levels of
mechanical stability and keying
• Does not require mechanical alignment for mating
• Meets MIL-C-49142, 48-hour salt spray requirement
• Special plating available to satisfy MIL-STD-1344 500-hour
salt spray requirement
• Push-on versions for test cable applications
• Fewer pieces to assemble
• Hermetically sealed versions available (see page 16)
SPC8S-201
.315/.313 DIA
.90
.276/.273 DIA
.288
.284
DIA
Socket....................................... SPC8S-201
Pin............................................. SPC8P-201
.631/.627
1.530
This pair of scoop-proof concentric contacts fits the Size 8 cavity
of MIL-C-38999 series 1, 3, & 4 and MIL-STD-1760 “External Stores”
type connectors.
SPC8S-201 Shown
Features
• Fits MIL-C-17/176-00002 and other twinax/triax cables
• Heat treated beryllium copper spring members
• Gold plated, Full Crimp contacts
.315/.313 DIA
SPC8P-201
.90
.305/296
1.173
SPC8P-201 Shown
TWINAX/TRIAX CONNECTORS
.218
DIA
TWINAX/TRIAX CONNECTORS
Twinax/Triax Connectors / Subminiature Jacks & Plugs
150/3150 Series TRS/TTM
Sub-miniature Jacks & Plugs
Sub-miniature concentric twinax/triax connectors increase
packing density up to 246%. They are designed for high density
applications where digital, video pair or baseband noise-free
guarded circuits are required. The 3-lug, 4-lug, and threaded
versions improve mechanical stability and provide “error-free”
redundant data bus capabilities. The wrench crimp version
accommodates cables with other jacket diameters up to .215" and
the tool crimp versions up to .250".
Cable Plug
Wrench Crimp
Bulkhead Jack
3-Lug.......................................... PL1554-Lug....................................... PL155FLThreaded.................................. PL3155-
Rear Mount, Wrench Crimp
3-Lug.......................................... BJ1594-Lug....................................... BJ159FLThreaded.................................. BJ3159-
.080
.748
.790
.590
.080
PL155-29 Shown
.375 HEX NUT
.562 HEX
.4375-28UNEF-2A
.500 HEX NUT
.375 HEX NUT
.375 WRENCH FLATS
.460 DIA MAX
BJ159-29 Shown
Mounting Hole: D4.125
Bulkhead Jack
Cable Plug
Rear Mount, Tool Crimp
Tool Crimp
3-Lug...................................... BJ159AC4-Lug................................... BJ159ACFLThreaded.............................. BJ3159AC-
3-Lug..................................... PL155AC4-Lug................................. PL155ACFLThreaded............................. PL3155AC-
.590
STRAIN RELIEF
1.164
1.322
BJ159AC Shown
STRAIN
RELIEF
Mounting Hole: D4.125
PL155AC-207 Shown
.600 DIA
.4375-28UNEF-2A
.500 HEX
1.00
.484 DIA MAX OVER KNURL
Cable Jack
.790
Wrench Crimp
Right Angle Cable Plug
.080
3-Lug.................................. CJ1504-Lug............................... CJ150FLThreaded.......................... CJ3150-
Tool Crimp
3-Lug................................... PLR155AC4-Lug............................... PLR155ACFLThreaded........................... PL33155AC-
.375 HEX NUT
.375 WRENCH FLATS
CJ150-29 Shown
.484 DIA MAX
1.77
MAX
SHRINKABLE
SEALING SLEEVE
(LONG)
.030
1.317
Cable Jack
Tool Crimp
3-Lug...................................... CJ150AC4-Lug................................... CJ150ACFLThreaded.............................. CJ3150AC-
.933
.484 DIA MAX
OVER KNURL
SHRINKABLE SEALING SLEEVE (LONG)
CLEAR, 175°C
SHRINKABLE
STRAIN RELIEF
PLR3155AC-201 Shown
CJ150AC-207 Shown
.34
1.289
.030
Refer to Cable Group Tables, pages 74-91.
18
“D” mounting holes see page 54.
SHRINKABLE
STRAIN RELIEF
Twinax/Triax Connectors / Subminiature Bulkhead Jacks
150/3150 Series, TRS/TTM
Front Mount Bulkhead Jack
Bulkhead Jack
Rear Mount, Solder Pot
Rear Mount, Solder Pot
3-Lug................................................. BJ157
4-Lug.............................................. BJ157FL
Threaded......................................... BJ3157
3-Lug................................................. BJ150
4-Lug.............................................. BJ150FL
Threaded......................................... BJ3150
19
1.049
.818
.101
1.050
.402
BJ150 Shown
ACCEPTS
.034 MAX DIA
CONDUCTOR
.750
.437 HEX
.3125-32UNEF-2A
.375 HEX NUT
BJ157 Shown
(Hermetically sealed version
available, pg.16)
Mounting Hole: D6.187
.093 DIA HOLE
Mounting Hole: D4.250
.892
SOLDER POT
ACCEPTS
.034 DIA
CONDUCTOR
.500 HEX NUT
.4375-28UNEF-2A
.140 DIA THRU
Feed-Through Jack
Bulkhead Jacks
3-Lug................................................. BJ158
4-Lug.............................................. BJ158FL
Threaded......................................... BJ3158
Flange Mount, Solder Pot
3-Lug......................................... BJ157F
4-Lug...................................... BJ157FFL
Threaded................................. BJ3157F
1.070
.620
Hole Configuration
2/Clear - .103” Diameter
2/Threaded - .099-56UNF-UB
4/Clear - .103” Diameter
4/Threaded - .099-56UNF-UB
A Dim= .425
B Dim= .687
BJ158 Shown
Mounting Hole: D5.190/D4.190 (Threaded)
# of Holes/Type-Dimension
-2C(S)
-2T(S)
-4C(S)
-4T(S)
.500 HEX
.375-32UNEF-2A
.437 HEX NUT
1.050
.485
B
TYP
.090
Insulated Bulkhead Jack
.500
TYP
Rear Mount, Tool Crimp
.300
DIA
MAX
TYP
3-Lug...................................... BJ154AC4-Lug.................................. BJ154ACFLThreaded.............................. BJ3154AC.580
MTG HOLES SEE BELOW
.688 HEX NUT
SHRINKABLE
SEALING SLEEVE (LONG)
SOLDER POT
ACCEPTS .026 DIA
CONDUCTOR
A
.750
DIA
BJ157F Shown
(S) = Comes with Stainless Steel Phillips #3-56 Pan Head Screws
Maximum Panel Thickness .187
BJ154AC Shown
Mounting Hole: D9.116
1.289
.030
SHRINKABLE
STRAIN RELIEF
Insulated Feed-Through Jack
Front Mount, Solder Pot
3-Lug................................................. BJ153
4-Lug.............................................. BJ153FL
Threaded......................................... BJ3153
3-Lug................................................. BJ152
4-Lug.............................................. BJ152FL
Threaded......................................... BJ3152
BJ152 Shown
Mounting Hole: D9.208
1.070
.580
.155
.5625-28UN-2A
.687 HEX NUT
BJ153 Shown
Mounting Hole: D9.116
SOLDER POT ACCEPTS
.034 MAX DIA CONDUCTOR
.295 DIA
.760
.5625-28UNEF-2A
.688 HEX
.308
1.055
Refer to Cable Group Tables, pages 74-91.
“D” mounting holes see page 54.
TWINAX/TRIAX CONNECTORS
Insulated Bulkhead Jack
TWINAX/TRIAX CONNECTORS
Twinax/Triax Connectors / Subminiature
150/3150 Series
Circuit Board Jack
Push-on Cable Plug
3-Lug............................................... CBJ157
4-Lug........................................... CBJ157FL
Threaded....................................... CBJ3157
Wrench Crimp
PL153.080
.686
.400
TYP
.308
.049/.045
DIA 6 HOLES
.722
.013
.200 TYP
.100"
CBJ157 Shown
Max Board Thickness .125
.437
DIA
.375 WRENCH
FLATS
PL153-29 Shown
.375 HEX NUT
.170
Right Angle Circuit Board Jack
Twinax/Triax TRS Subminiature
3-Lug............................................. CBJR157
4-Lug......................................... CBJR157FL
Threaded..................................... CBJR3157
CBBJR159
Right Angle Bulkhead Rear Mount 3-Lug
.590
.562
HEX
.665
±.030
Ø.062±.001 TYP
.778
.062 DIA TYP
.413
.100
.070
DIA 4
PLACES
.125
.660
±.030
.300
.100
.200
.4375-28UNEF-2A
.500 HEX NUT
.125
.120
Max Panel Thickness: .125 D-Hole: D4
3-Lug............................................... BN153
4-Lug............................................ BN153FL
Threaded........................................ BN3153
1.156
1.034
BN153 Shown
.375 WRENCH
FLATS
TRS/TTM Coupling Adapter
Barrel Connector
3-Lug............................................... AD158
4-Lug............................................ AD158FL
Threaded....................................... AD3158
1.070
AD158 Shown
.400 DIA MAX
OVER KNURL
Refer to Cable Group Tables, pages 74-91.
20
“D” mounting holes see page 54.
.100±.003
Ø.070± .001
4 PLACES
CBJR157 Shown
“T” Adapter
.300
±.003
.200
±.003
.100± .003
Ø.443
.439
.190
.187
Twinax/Triax Connectors / Series Instructions
21
450 Series
Subminiature Twinax 3-lug & 4-lug
3450 Series
Subminiature Twinax Threaded
Concentric connectors designed for MIL-STD-1553B
airborne digital databus weight reduction applications.
Features
• 3-lug, 4-lug & threaded versions
• Field installation full crimp design. No soldering required
• Fully inspectable assembly process (no blind or questionable
solder connections)
• Total of ten polarized & keyed combinations
• Three different keyings for 3-lug versions
• Two interchangeable pin & socket arrangements
• Fewer pieces to assemble
• Meets MIL-C-49142, 48-hour salt spray requirement
• Standard plating to satisfy MIL-STD-1344, 500-hour
salt-spray requirement
• Weatherproof designs utilize sealing gaskets and heat
shrink tubing
• Fits MIL-C-17/176-00002 & other twinax/triax cables
• Compatible with Raychem designs utilizing military crimp
style connectors
80 Series
Standard 2-lug & 3-lug (TRC)
380 Series
Standard Threaded (TRN)
Used in digital data bus, video pair, MIL-STD-1553B
(primary/redundant data bus), MIL-STD-1397 (shipboard data
bus), baseband circuit and any application for noise-free guarded
circuits.
Features
• Standard “C” sized concentric connectors
• Used with larger twinax/triax cables with outer diameters
of .250"-615"
• Does not require mechanical alignment for mating
Miniature 2-Pin Polarized, 2-lug (TWBNC)
Used in digital data bus, video pair, MIL-STD 1553B (airborne/
ground primary/redundant), baseband circuit and any
application for “noise-free guarded” circuits. They are not
recommended for new designs. MIL-STD-1553B permits
designer discretion for use of concentric designs in lieu of the
two-pin connector.
Features
• Same size as BNC/TNC connectors
• Fully enclosed beryllium copper spring fingers
• Stepped Dielectric
TWINAX/TRIAX CONNECTORS
30 Series
TWINAX/TRIAX CONNECTORS
Twinax/Triax Connectors / Concentric Twinax
450 Series
Concentric Twinax 450 Series
3-lug & 4-lug Keyings
.080"110°
125°
P
R
125°
W
.067"
.062"
TYP
The 450 Series was designed for airborne digital data bus
applications utilizing the MIL-STD-1553B data bus. The 450 Series
will fit most twinax cables. Connectors are available in five
FL
.067"
.062"
TYP
110°
125°
.067"
.062"
TYP
90°
TYP
.080"
125°
125°
125°
.067"
.062"
TYP
different coupling configurations which include 3-lug versions
with three (3) separate keyings, a 4-lug, and a threaded version
with safety wire holes.
Diagrams shown above are for plugs.
Refer to page 23 for photo of intermediate contacts.
Bulkhead Jack
Rear mount,
Solder pot
.438 HEX NUT
.3125-32UNEF-2A
.750
MAX
SOLDER POT ACCEPTS
.026 DIA CONDUCTOR
.240
DIA
.075
.795
.047 DIA SAFETY
WIRE HOLES 2 PLACES
.438 HEX NUT
SOLDER POT
ACCEPTS .750
.026 MAX MAX
DIA COND.
.437 HEX NUT
.240
DIA
Mounting
Holes:
DD8.250
DD8.125 (Threaded)
.075
.456
.3125-32UNEF-2A
.795
1.03
Intermediate
Contact Pin
Socket
BJ450PP
BJ450RP
BJ450WP
BJ450FLP
BJ3450P
BJ450PS
BJ450RS
BJ450WS
BJ450FLS
BJ3450S
Intermediate
Contact Pin
Socket
P
R
W
FL
-
BJ457PP
BJ457RP
BJ457WP
BJ457FLP
BJ3457P
BJ457PS
BJ457RS
BJ457WS
BJ457FLS
BJ3457S
Key
Code
Intermediate
Contact Pin
Socket
PLR455ACPPPLR455ACRPPLR455ACWPPLR455ACFLPPLR3455ACP-
PLR455ACPSPLR455ACRSPLR455ACWSPLR455ACFLSPLR3455ACS-
P
R
W
FL
-
Coupling
Type
3-lug
3-lug
3-lug
4-lug
Threaded
Key
Code
BJ457FLP-1 SHOWN
Right Angle Cable Plug
Coupling
Type
.030
All Crimp
SEALING
SLEEVE
1.46
Mounting
Holes:
DD8.130
DD8.125 (Threaded)
3-lug
3-lug
3-lug
4-lug
Threaded
Key
Code
1.03
Bulkhead Jack
Front mount,
Solder pot
Coupling
Type
.438 HEX NUT
Mounting
Holes:
.047 DIA SAFETY
WIRE HOLES
DD8.130
2 PLACES
DD8.125 (Threaded)
1.10
MAX
(1.25)
.500 DIA
OVER KNURL
3-lug
3-lug
3-lug
4-lug
Threaded
P
R
W
FL
-
PLR455ACPP-201
RFI Jack Caps & Bulkhead Jack Terminations
For use with 450 Series Plugs
Rear Mount
Refer to Cable Group Tables, pages 74-91.
22
.080"
110°
Chain options see page 57. “D” mounting holes see page 54.
Coupling
Type
3-lug
3-lug
3-lug
4-lug
Threaded
RFI
Caps
RFI457RFI457RFI457RFI457FLRFI3457-
Intermediate
Contact Pin
Socket
TBJ451P- -R
TBJ451P- -R
TBJ451P- -R
TBJ451FLP- -R
TBJ3451P- -R
TBJ451S- -R
TBJ451S- -R
TBJ451S- -R
TBJ451FLS- -R
TBJ3451S- -R
Twinax/Triax Connectors / Concentric Twinax
450 Series
23
450 Series
Intermediate Contact Assemblies
Pin/Socket . . . . PS450AC-
Socket/Pin . . . . SP450ACContact customer service for exact specifications. For Trompeter
connectors which meet outgassing requirements, contact our
technical support staff for more information. Compatible with
Raychem DK-621 Series. Refer to page 22 for Keyings.
The 450 Series includes cable jacks and plugs with interchangeable
contact assemblies. The contact and body assemblies may be
ordered separately (see the facing page). Cable connectors accept
cables with a maximum outer diameter of .180" and conductors to
.025".
Bulkhead Cable Jack
Coupling
Type
Rear mount, All Crimp
.047 SAFETY
WIRE HOLES-2 PLACES
.4375 HEX NUT
.43 HEX
.3125-32UNEF-2A
.2400
DIA
.334
.707
SEALING SLEEVE
(LONG)
1.365
3-lug
3-lug
3-lug
4-lug
Threaded
Key
Code
Body
Assembly Only
Assembly
Intermediate
Contact Pin
Socket
P
R
W
FL
-
BJ459ACPBJ459ACRBJ459ACWBJ459ACFLBJ3459AC-
BJ459ACPPBJ459ACRPBJ459ACWPBJ459ACFLPBJ3459ACP-
BJ459ACPSBJ459ACRSBJ459ACWSBJ459ACFLSBJ3459ACS-
Key
Code
Body
Assembly Only
Assembly
Intermediate
Contact Pin
Socket
P
R
W
FL
-
CJ450ACPCJ450ACRCJ450ACWCJ450ACFLCJ3450AC-
CJ450ACPPCJ450ACRPCJ450ACWPCJ450ACFLPCJ3450ACP-
CJ450ACPSCJ450ACRSCJ450ACWSCJ450ACFLSCJ3450ACS-
Key
Code
Body
Assembly Only
Assembly
Intermediate
Contact Pin
Socket
P
R
W
FL
-
PL455ACPPL455ACRPL455ACWPL455ACFLPL3455AC-
PL455ACPPPL455ACRPPL455ACWPPL455ACFLPPL3455ACP-
PL455ACPSPL455ACRSPL455ACWSPL455ACFLSPL3455ACS-
Intermediate
Contact Pin to
mate with Sockets
Sockets to mate
with Pins
TNG451P- -R
TNG451P- -R
TNG451P- -R
TNG451FLP- -R
TNG3451P- -R
TNG451S- -R
TNG451S- -R
TNG451S- -R
TNG451FLS- -R
TNG3451S- -R
.030
(1.25)
BJ459ACFL-202
Mounting Holes: DD8.156, DD8.125 (Threaded)
Cable Jack
All Crimp
.030
SEALING SLEEVE
1.365
.334
DIA
.2400
DIA
(1.25)
CJ450ACFLP-202
Coupling
Type
3-lug
3-lug
3-lug
4-lug
Threaded
Cable Plug
All Crimp
Coupling
Type
.500 DIA OVER KNURL
1.25
1.43
PL455ACR-221
.030
SEALING
SLEEVE
RFI Plug Caps & Terminations
Plugs for use with 450 Series Jacks
3-lug
3-lug
3-lug
4-lug
Threaded
Coupling
Type
3-lug
3-lug
3-lug
4-lug
Threaded
Chain options see page 57. “D” mounting holes see page 54.
RFI
Caps
RFI455RFI455RFI455RFI455FLRFI3455-
TWINAX/TRIAX CONNECTORS
.334
TWINAX/TRIAX CONNECTORS
Twinax/Triax Connectors / Standard Threaded
80/380 Series, TRC/TRN
Cable Plug
Bulkhead Cable Jacks
2-lug............................................. PL803-lug........................................... PL803Threaded.....................................PL380-
Wrench Crimp, Flange Mount
2-lug........................................... BJ89F3-lug......................................... BJ893FThreaded.................................. BJ389F-
.687 WRENCH FLAT
1.773
Wrench Crimp, D Hole Mount
PL80 Shown
Larger bodies available to
accommodate cable sizes,
contact customer service.
.750
DIA
2-lug............................................ BJ893-lug.......................................... BJ893Threaded................................... BJ389.844
TYP
.625 WRENCH FLAT
.130
.625
WRENCH
FLATS
.781 DIA MAX
.685 .535
DIA DIA
1.125
TYP
.750
Cable Jack
Wrench Crimp
MAX
PANEL THK
.250
2-lug............................................. CJ803-lug........................................... CJ803Threaded.................................... CJ380-
.120 DIA
4 MTG HOLES
.130
CABLE ENTRY
1.590
Top Drawing: BJ89F Shown
1.790
1.000
HEX TYP
1.790
1.590
.500
.094
.761
.625 WRENCH FLATS
Bottom Drawing: BJ89 Shown
.130
Mounting Holes: DD6.250 /
D11.250 - Cable Groups: -14A,
-16, -61, -62
CJ80 Shown
.535
DIA
.500
WRENCH FLATS
.130
.919
1.590
WRENCH FLATS
Bulkhead Jack
Solder Pot
2-lug................ BJ80
3-lug.............. BJ803
Threaded........ BJ380
TRC “T” Adapter
1.312
.500
.095
2-lug............ BN83-1
3-lug.......... BN833-1
Threaded... BN383-1
.065 DIA
.535
DIA
BJ80 Shown
Mounting Hole: D1.156
1.750
.750 SQ.
.375
.535
DIA
TYP
ACCEPTS
.065 DIA
CONDUCTOR
JACK
JACK
1.619
.773 DIA
MAX
.750-32UNEF-2A
BN83-1 Shown
1.000 HEX
.730 DIA
.140 DIA
MTG HOLE
Feed-thru Jack
2-lug................ BJ88
3-lug.............. BJ883
Threaded....... BJ388
BJ88 Shown
Mounting Hole: D1.343
Refer to Cable Group Tables, pages 74-91.
24
“D” mounting holes see page 54.
.200 DIA
1.650 TYP
.90
1.060
DIA
1.000 HEX NUT
.750-32UNEF-2A
PLUG
.406
For other chain options see page 63.
Twinax/Triax Connectors / Two-Pin Polarized
30 Series, TWBNC/TWTNC
Mil-C-3655 Interface
25
Circuit Board Bulkhead Jack
Right Angle-Two-pin Polarized Twinax (TWBNC)
CBBJR39A
Cable Plug
1.216
Wrench Crimp, Two-pin Polarized
1.046
.946
2-lug............................................ PL30-
.718
.050
.096
.931
.34
.380
DIA
PL30 Shown
.665
.030 TYP
.437 HEX NUT
.437 WRENCH FLATS
.593 DIA MAX
.500-28UNEF-2A
.562 HEX NUT
.13 TYP
.124
Mounting Hole: D3.125
.258 TYP
.058 TYP
.090 TYP
.100
Bulkhead Jack
Front Mount, Solder Pot, Two-pin Polarized
2-lug................................................... BJ30
.0625 DIA
1.070
.258
.050
.046
.468
.258
TYP
.070 DIA TYP
.040 DIA
CONDUCTORS
BJ30 Shown
Mounting Hole: D5.130
.100
Bulkhead Jack
.375-32UNEF-2A
.437 HEX NUT
.468 HEX NUT
Rear Mount, Solder Pot
Two-pin Polarized
2-lug.................................................... BJ31
Feed-Through Jack
Two-pin Polarized
.837
2-lug.................................................... BJ38
.310
.093
.562 HEX NUT
.131
1.308
.783
BJ38 Shown
Mounting Hole: D3.160
.794
SOLDER POT
ACCEPTS .040 DIA
CONDUCTORS
.380
DIA
BJ31 SHOWN
.500-28UNEF-2A
BJ31 Shown
Mounting Hole: D3.280
.730 DIA
.500-28UNEF-2A
.525
.625 HEX
.687HEX
Bulkhead Cable Jack
Rear Mount, Wrench Crimp
Two-pin Polarized
2-lug............................................. BJ391.000
.096
BJ39 Shown
Mounting Hole: D3.218
.437 HEX NUT
.687 HEX NUT
.500-28UNEF-2A
.625 HEX NUT
Refer to Cable Group Tables, pages 74-91.
“D” mounting holes are on page 54. Note: Only 30 Series have two-pin polarizations.
Note: These connectors are still available, although we recommend using concentric (70 series) twinax for all new applications.
TWINAX/TRIAX CONNECTORS
.806
COAX CONNECTORS
Coax Connectors / BNC Coax Connector Introduction
Trompeter’s BNC Coax Tool Crimp Connector
19 reasons why our BNC connectors outperform the competition every time!
Tested and
2
1 approved to NEBS
Level 3 Type 2.
Stepped crimp sleeve grips the outer
jacket, increasing connector-tocable pull strength reliability.
Unique plating flow hole
3 ensures uniform interior
plating.
Captive center contact provides
6 positive tactile installer feedback
for error-free assembly.
Tapered ferrule facilitates connector
5 insertion under the braid. Foil, if any,
is positioned inside the ferrule.
Exterior ferrule surface
delivers superior cable 4
retention without braid
breakage.
7 Also prevents pin movement
360° ferrule improves
9 connector-to-cable
tensile strength
when cable is flexed.
10
Generous capture
cone design ensures
8
easy insertion of
center conductor.
Unique locking center contact
design for high contact retention.
50-millionths gold plating
13 improves durability over
Spring-loaded coupling ring
uses a beryllium-copper
crescent washer to assure 11
positive electrical mating.
thousands of mating cycles.
14
This coupling ring also 12
avoids compression set
Nickel, non-tarnish
issues over time.
finish adds to the
endurance and 15
reliability of this
rugged connector.
16
Fully enclosed metal outer conductor is an
18
integral part of a rugged construction,
important for handling the stress of cable
weight over time.
17
Also provides superior electrical
conductivity for exceptional
signal quality (true 75-ohm).
Beryllium Copper spring fingers
for high mating cycle life and
repeatability.
Machined solid PTFE insulator for
superior RF electrical performance.
19
Spring fingers are plated with nickel for superior
wear properties over repeated matings.
BNC Coax Wrench Crimp Connector
Wrench Crimp Features
• 3-piece construction
• Captive center contact pin in cone
assembly
• Spring-loaded coupling ring using
a beryllium-copper crescent
washer
• Freely rotating captured insert inside the clamp-nut assembly
• Stepped captured insert inside the clamp-nut assembly
• 360° metal-to-metal, sandwich braid capture of the outerbraid-to-cone assembly. (No insulation between the clamping
surfaces)
• Machined barb on the end of the cone assembly
Hermetically Sealed Coax Connectors available, contact customer service.
26
SureNotch™ BNC
The UPL220 Series and the UPL250 Series feature SureNotch™,
Trompeter’s innovative solution for incomplete connector mating.
SureNotch™ provides immediate and reliable visual confirmation
of secure mating. The UPL250 Series Mini-BNC Series allow higher interconnect density, enabling 40% more interconnects in the
same area, with all the positive characteristics of the full size BNC.
• Telco BNC
• SureNotch™ BNC provides visual indicator that every BNC is
locked onto the mating jack
• Black spring water highlights the notch
• Standard feature on all Trompeter Telco 75 Ohm BNC’s
Coax Connectors / Miniature Coax 20/220 Series
BNC Plugs & Jacks
Cable Plug
Cable Jack
1.132
Tool Crimp
.632
50Ω........ PL22075Ω...... UPL220-
.997
.096
Wrench Crimp
CONTACT PIN
27
50Ω................................. CJ2075Ω............................... UCJ20CRIMP SLEEVE
.500 FLATS
.600 DIA MAX
.593 DIA MAX
Cable Plug
.437 HEX
Cable Jack
.931
.096
Wrench Crimp
1.208
Tool Crimp
50Ω........... PL2075Ω......... UPL20-
.708
50Ω................................ CJ22075Ω.............,................ UCJ220-
.593 DIA
MAX
.437 HEX NUT
.437 WRENCH FLATS
.606 DIA MAX
Bulkhead Plug
Bulkhead Cable Jack
Front Mount, Solder Pot
Rear Tool Crimp
50Ω.................................................... PL21
75Ω.................................................. UPL21
50Ω................................. BJ22075Ω............................... UBJ220-
.642
.420
CRIMP
SLEEVE
.380
DIA
.4375-28UNEF-2A
1.020
1.220
Mounting Hole: D3.100
1.089
.078
.687 HEX NUT
.400
.250
BNC Adapter
.987
Male to Female Right Angle
ACCEPTS
.064 DIA
CONDUCTOR
Mounting Hole: C2.085
75Ω BNC..................... UADRMF220
1.100
.500 HEX
.375-32UNEF-2A
.437 WRENCH FLAT
Cable Plug
BNC “T” Adapter
90° Right Angle, Full Crimp
50Ω.................................... BN23
75Ω.................................. UBN23
75Ω....................................... UPLR22045° Angle, Full Crimp
.890
1.080
75Ω...................................... UPLFF2201.100
1.300
BNC Coupling Adapter
1.100
.593
MAX
1.600
Barrel connector
50Ω.................................. AD228
75Ω................................ UAD228
.444 DIA
1.900 MAX
1.284
.848
.430
.808
.433 MAX
.424
CONTACT PIN
45°
.380
CRIMP SLEEVE
.593
MAX
.444 DIA
CONTACT PIN
CRIMP SLEEVE
Refer to Cable Group Tables, pages 74-91.
“D” mounting holes are on page 54.
COAX CONNECTORS
1.325
MAX
COAX CONNECTORS
Coax Connectors / Miniature Coax 20/220 Series
BNC Bulkhead Jacks
Insulated Bulkhead Cable Jack
Non-insulated Bulkhead Jack
Wrench Crimp, Rear Mount
Feed-through
50Ω............................................... BJ2675Ω............................................. UBJ26-
50Ω................................................... BJ224
75Ω................................................. UBJ224
.500-28UNEF-2A
1.000
.790
.562 HEX NUT
.096
.510
.505
Ø.380
TYP
Mounting Hole: D2.187
GF-Ground filter version page
35
.437 HEX
.830 DIA MAX
.625-24UNEF-2A
.750 HEX NUT
.448
.443
.060
.584
RECOMMENDED
PANEL
CUTOUT
1.284
±.015
Mounting Hole: DD3.156
Insulated Bulkhead Jack
Insulated Bulkhead Jack
Front Mount, Solder Pot
Recessed Insulated Adapter (RIA) Feed-through
50Ω................................................... BJ227
75Ω................................................. UBJ227
75Ω.......................................... UBJ224-RIA
.096
.562 HEX NUT
2X
1.060
Ø.180
.050
.471
.750
2X Ø.380
ACCEPTS
.060 DIA
CONDUCTOR
.710
.99
Mounting Hole: D3.147
.500-28UNEF-2A
.562 HEX NUT
.562 HEX NUT
2X Ø.108
THRU
1.304
1.000
.806
Bulkhead Cable Jack
.096
.884
1.19
Bulkhead Jack
1.058
Front Mount, Solder Pot
Rear Mount, Wrench Crimp
.425
.046
50Ω.......................... BJ20
75Ω........................ UBJ20
50Ω.......................... BJ2975Ω........................ UBJ29-
ACCEPTS
.060 DIA
CONDUCTOR
w/Solder Lug
.437HEX
Mounting Holes: D3.218 (D2.218-Cable Groups 6, 6E,51,52)
.687 HEX
.500-28UNEF-2A
.625 HEX
50Ω....................... BJ20SL
75Ω..................... UBJ20SL
.468 HEX
Mounting Hole: D5.125
Bulkhead Jack
Insulated Bulkhead Jack
Non-insulated
Feed-through
1.060
50Ω.......................... BJ23
75Ω........................ UBJ23
2X Ø.380
SOLDER POT ACCEPTS
.060 DIA CONDUCTOR
.380
DIA
Mounting Hole: DD3.156
.060
Rear Mount, Solder Pot
50Ω.......................... BJ21
75Ω........................ UBJ21
.562 HEX
.500-28UNEF-2A
Ø.562
50Ω.......................... BJ228
75Ω........................ UBJ228
.757
Mounting Hole: D3.147
Insulated Bulkhead Cable Jack
.500 HEX
.375-32UNEF-2A
.562 HEX
.562 HEX NUT
.500-28UNEF-2A
.42
1.284
Mounting Hole: D3.147
Bulkhead Jack
.562 HEX
.500-28UNEF-2A
50Ω.......................... BJ24
75Ω........................ UBJ24
Refer to Cable Group Tables, pages 74-91.
“D” mounting holes are on page 54.
50Ω.......................... BJ28
75Ω........................ UBJ28
.380 DIA
TYP
Mounting Hole: DD3.100, (Hermetically sealed
version available, call customer service).
28
Insulated Bulkhead Jack
Feed-through
Feed-through Non-insulated
.700
1.280
.584
1.284
.046
.505
.380 DIA
TYP
.562 HEX
Mounting Hole: D3.156 (Hermetically sealed version
available, call customer service).
GF-Ground Filter version available page 370c .
.562 HEX NUT
.500-28UNEF-2A
Coax Connectors / Coax 20/220 Series
Circuit Board Jacks
29
Edge Mount Circuit Board Jacks
Trompeter manufacturers a wide selection of circuit board jacks.
Decibels (dB)
10 dB/ Ref 0 dB
50
MARKERS:
40
1: -30.906 dB
@ 1.000 GHz
30
2: -33.549 dB
@ 1.5 GHz
20
3: -31.237 dB
@ 2 GHz
10
4: -19.657 dB
@ 2.960 GHz
0
-10
-20
4
1
-30
-40
3
2
-50
STOP 2.999973 MHz
G
START 14.925373 MHz
Frequency in MHz
Circuit Board Edge Mount
Coax “BNC” Style Receptacle 75Ω
Part Number
UCBJE20-1
UCBJE20-2
1.003
.723
BOARD
THICKNESS
Board Thickness
.060-.064
.028-.033
Ø.400
.250
Circuit Board Bulkhead Edge Mount
Max Panel Thickness: .179
Board Thickness
.060-.064
.028-.033
.084
.120
RINSE
NOTCH
Ø.412
Coax “BNC” Style Receptacle 75Ω
Part Number
UCBBJE20-1
UCBBJE20-2
UCBBJE20-3
UCBBJ320-4
(.021)
.500-28UNEF-2A
1.003
(.021)
.713
.430
BOARD
THICKNESS
.562 HEX NUT
.500
Ø.510
Ø.505
.447
.443
RINSE NOTCH
.250
COAX CONNECTORS
COAX CONNECTORS
Coax Connectors / Coax 20/220 Series
Circuit Board Jacks
Trompeter manufacturers a wide selection of circuit board jacks, Shown below are the most commonly requested designs. For custom
designs, contact customer service.
Circuit Board Jack
Circuit Board Jack
Straight, 4-leg
Straight, 3-leg
75Ω............................................... UCBJ20F
75Ω............................................... UCBJ223
(.850)
.055
.047 DIA
5 HOLES
.500
.591 TYP
TYP
Ø.062 DIA
3 HOLES
.815
.043 DIA
4 PLACES
.013
TYP
.045 DIA
.502
.498
TYP
.090
.156 TYP
120° TYP
Ø.340
DIA BC
.380
DIA
TYP
Ø.047 DIA
.013
.560
.200
TYP
Circuit Board Jack
Right Angle Coax BNC
Straight, 3-leg
Circuit Board Jack
50Ω................................................... CBJ20
50Ω.............................................. CBJR220
75Ω............................................ UCBJR220
1.090
.885
Ø.062 DIA
3 HOLES
.722
.129
.380
DIA
.156 TYP
120° TYP
.030
.131
.040 TYP
.129
Ø.047 DIA
Circuit Board Jack
.258
.258
Ø.340
DIA BC
.380
DIA
TYP
.029
.062
.430
Circuit Board Jack
Straight, 4-leg
Right Angle, Tall Version
50Ω................................................... CBJ22
50Ω.............................................. CBJR20A
75Ω............................................ UCBJR20A
.722
.188 TYP
.380
DIA
TYP
.156 TYP
.047 DIA
MODEL
NO.
CBJR20
UCBJR20
LTR OHM A
B
C
D
E
CODE
DIM DIM DIM DIM DIM
50 .046 .24 .090 .050 .0625
75 .029 .24 .090 .050 .0625
.062 DIA
4 HOLES
MODEL
NO.
CBJR20A
UCBJR20A
LTR OHM A
B
C
D
E
CODE
DIM DIM DIM DIM DIM
A
50 .046 .34 .090 .058 .070
A
75 .029 .34 .090 .058 .070
.030 TYP
.380
DIA
B
TYP
C TYP
1.054
±.030
.890
±.030
MODEL
NO.
CBJR20
UCBJR20
Circuit Board Jack
Straight, 4-leg
MODEL
LTR OHM A
B
C
D
E
CODE
DIM DIM DIM DIM DIM
50 .046 .24 .090 .050 .0625
75 .029 .24 .090 .050 .0625
LTR OHM
NO.
CODE
75Ω............................................... UCBJ224
CBJR20A
A
UCBJR20A
.188 TYP
.047 DIA
.380
DIA
TYP
30
.156
.062 DIA
4 HOLES
.258
TYP
.13 TYP
D TYP
.030 TYP
.258
B
TYP
A
B
C
D
E
DIM DIM DIM DIM DIM
.046 .34 .090 .058 .070
.029 .34 .090 .058 .070
.258
TYP
.040
E TYP
.380
DIA
.258
C TYP
.815
.013 TYP
A
50
75
1.054
±.030
.890
±.030
.258
TYP
.13 TYP
D TYP
.258
TYP
.040 TYP
A
Coax Connectors / Coax 20/220 Series
Circuit Board Jacks
Non-insulated Circuit Board Bulkhead Jack
Insulated Circuit Board Bulkhead Jack
Straight, 4-leg
Straight
75Ω............................................... UCBBJ29
50Ω................................................. CBBJ26
.156
TYP
1.388
.425
.557
1.332
.013
.380 DIA
.414
MIN
.200
.0390 DIA
.557
.013
TYP
.177
.047
.0935 DIA
4 PLACES
.200
.400
TYP
.687 DIA
.562 HEX NUT
.0935 DIA
4 PLACES
.128
.354
TYP
.158 TYP
.500-28UNEF-2A
.564 HEX NUT
Mounting Hole: D3.109
.630 DIA MAX
WASHER
Mounting Hole: D3.156
.562 DIA
Right Angle Circuit Board Bulkhead Jack
Non-insulated
Insulated
50Ω.............................................. CBBJR26
75Ω............................................ UCBBJR26
50Ω.............................................. CBBJR29
75Ω............................................ UCBBJR29
CBBJR29
UCBBJR29
CBBJR29A
UCBBJR29A
LTR CODE
-----
A
IMPD Ω
A DIA
50
.046
75
.029
50
.046
75
.029
B DIM
C DIM
D DIM
E DIA
MODEL #
LTR CODE
CBBJR26
.24
.090
.050
.0625
.24
.090
.058
.070
-----
UCBBJR26
CBBJR26A
A
UCBBJR26A
RoHS Compliant
RoHS Compliant
Non-insulated
Insulated
6-0001-1
6-0001-2
6-0001-3
6-0001-4
LTR CODE
-----
A
IMPD Ω
A DIA
50
.046
75
.029
50
.046
75
.029
B DIM
IMPD Ω
A DIA
50
.046
75
.029
50
.046
75
.029
B DIM
C DIM
D DIM
E DIA
.24
.090
.050
.0625
.34
.090
.058
.070
B DIM
C DIM
D DIM
E DIA
.24
.090
.050
.0625
.34
.090
.058
.070
50Ω......................................... CBBJR26-RC
75Ω....................................... UCBBJR26-RC
50Ω............................................. 6-0001-1
75Ω............................................. 6-0001-4
MODEL #
.177
.562 HEX
Right Angle Circuit Board Bulkhead Jack
MODEL #
31
C DIM
D DIM
E DIA
MODEL #
LTR CODE
CBBJR26- RC
.24
.090
.050
.0625
.24
.090
.058
.070
-----
UCBBJR26- RC
CBBJR26A-RC
A
UCBBJR26A-RC
IMPD Ω
A DIA
50
.046
75
.029
50
.046
75
.029
1.237
Mounting Holes: D3.156 (Insulated)
Maximum Panel Thickness: .179
D-Hole: D3
1.074
.773
.046
.649
ACROSS
POINTS
.593 DIA
.258
E DIA TYP
B TYP
.380
DIA
.258
.030
TYP
A DIA
.500-28UNEF-2A
.13 TYP
.562 HEX NUT
.040
TYP
.258
TYP
.124
D TYP
.258
TYP
C TYP
Mounting Holes: D3.156 (Insulated)
Circuit Board Jacks
Circuit Board Mounting
Mini-WECo Patch Jack
75Ω Right Angle......... CBJR12
1.76
.44 DIA
1.46
MODEL
NO.
CBJR12
CBJR12A
.0625 DIA
.030
TYP
LTR
B
CODE DIM
.24
A
.34
.070 DIA TYP
.397
TYP
B
B=.24
.058
TYP
.120 TYP
.050
DIA
.600
TYP
.156
TYP
.1985
.040 TYP
.397
TYP
.400
.200
COAX CONNECTORS
Coax Connectors / Mini-WECo Coax
COAX CONNECTORS
Coax Connectors / Miniature Coax 250 Series
Mini-BNC Plugs & Jacks
The mini-BNC 250 RF connector series from Trompeter was designed specifically for DS3 telco coaxial central office applications to
allow higher interconnect density while preserving the positive characteristics of the Trompeter full size BNC. In fact, the 250 series
provides for higher density of interconnects in a given area.
Miniature BNC (M-BNC) Coaxial Plug
Miniature BNC (M-BNC) Coaxial Bulkhead Jack
Straight
Straight
75Ω......................................... UPL250-
75Ω.......................................... UBJ250-
.643
±.010
Ø.507
.500
.500
.530
Ø.437
NOTE: All UPL250 plugs come
with our SureNotch™ feature.
Ø.300
Miniature BNC (M-BNC) Coaxial Circuit Board Jack
Miniature BNC (M-BNC) Circuit Board Jack
Straight
Right Angle
75Ω........................................... UCBJ250-N
75Ω........................................... UCBJ250-G
75Ω......................................... UCBJR250-N
75Ω......................................... UCBJR250-G
.608
.308
.355
.365
.157
.295
.424
Ø.295
.295
.409
.259
.015
.308
.015
.157
Part Number
Description
Plating
UPL250UPLR250UBJ250UCBJ250-G
UCBJ250-N
UCBBJ250-G
UCBBJ250-N
UCBJR250-G
UCBJR250-N
UCBBJR250-G
UCBBJR250-N
UCBJE250-1
UCBJE250-2
UCBBJE250-1
UCBBJE250-2
UAD258
Straight plug M-BNC series
Right angle plug M-BNC series
Bulkhead cable jack
Straight PCB-mounted jack
Straight PCB-mounted jack
Straight PCB-mounted jack
Straight PCB-mounted jack
Right angle PCB-mounted jack
Right angle PCB-mounted jack
Right angle PCB-mounted jack
Right angle PCB-mounted jack
PCB-edge mounted SMT jack
PCB-edge mounted SMT jack
PCB-edge mounted SMT jack
PCB-edge mounted SMT jack
M-BNC jack to M-BNC jack adapter, Barrel
adapter
Terminators
Terminators
BNC to MBNC adapters M to F
BNC to MBNC adapters M to F
BNC to MBNC adapters M to F
ni
ni
ni
au
ni
au
ni
au
ni
au
ni
au
au
au
au
ni
Bulkhead
Mount
n/a
n/a
yes
no
no
yes
yes
no
no
yes
yes
no
no
yes
yes
yes
ni
ni
ni
ni
ni
no
no
no
no
no
UTNAF250
UTNAM250
UADF20M250
UADF20F250
UADF250M20
Refer to Cable Group Tables, pages 74-91.
32
“D” mounting holes are on page 54.
PCB OA
Thickness
4”x4”
0.032
0.064
0.032
0.064
Coax Connectors / Miniature Coax Threaded 40/240 Series
TNC
Cable Plug
Cable Jack
Wrench Crimp
Wrench Crimp
50Ω.............................................. PL4075Ω........................................... UPL40-
50Ω.............................................. CJ4075Ω........................................... UCJ40-
.437 OR .500
WRENCH FLATS
AND NUT
.997
33
.437 HEX
.4375-28UNEF-2A
.645 DIA MAX
.096
.960/1.001
.096
Cable Plug
Cable Jack
Tool Crimp
50Ω........................................... PL24075Ω......................................... UPL240-
Tool Crimp
50Ω............................................ CJ24075Ω.......................................... UCJ240-
1.140
1.208
.708
.640
CRIMP SLEEVE
.593
DIA
MAX
.650 DIA MAX
CJ240-001 SHOWN
.4375-28UNEF-2A
Insulated Bulkhead Jack
TNC Coupling Adapter
Feed-Through
Barrel Connector
50Ω.................................................... BJ48
75Ω.................................................. UBJ48
50Ω................................................... AD48
75Ω................................................. UAD48
1.280
1.282
.505
.046
.381
.4375.28UNEF-2A TYP
.500-28UNEF-2A
.562 HEX NUT
.562 HEX
Mounting Hole: D3.156
GF-Ground filter version page 41
COAX CONNECTORS
Refer to Cable Group Tables, pages 74-91.
“D” mounting holes are on page 54.
COAX CONNECTORS
Coax Connectors / Miniature Coax Threaded 40/240 Series
TNC Bulkhead Jacks
Insulated Bulkhead Jack
Bulkhead Jack
Rear Mount, Solder Pot
Solder Pot
50Ω..................................................... BJ41
75Ω................................................... UBJ41
50Ω..................................................... BJ40
75Ω................................................... UBJ40
1.060
1.058
.046
.425
.757
SOLDER POT ACCEPTS
.060 DIA CONDUCTOR
SOLDER POT ACCEPTS
.060 DIA CONDUCTOR
.382
.378
DIA
.380
DIA
Mounting Hole: D5.125
.375-32UNEF-2A
.4375-28UNEF-2A
.500-28UNEF-2A
.562 HEX NUT
.562 HEX NUT
.4375-28UNEF-2A
.500 HEX NUT
Mounting Hole: D3.147
Insulated Bulkhead Jack
Rear Mount, Wrench Crimp
1.000
.471
Front Mount, Solder Pot
50Ω............................................... BJ4675Ω............................................ UBJ46-
50Ω................................. BJ47
75Ω................................. UBJ47
.830
.790
1.060
Insulated Bulkhead Jack
SOLDER POT
ACCEPTS
.060 DIA
CONDUCTOR
Mounting Hole: D3.147
.096
Mounting Hole: D2.187
GF-Ground filter version page 40.
.437 HEX
.687 HEX
.625-24UNEF-2A
.750 HEX NUT
.4375-28UNEF-2A
.500-28UNEF-2A
.562 HEX NUT
.562 HEX NUT
Bulkhead Cable Jack
1.000
Wrench Crimp
.806
50Ω................................... BJ4975Ω................................. UBJ49-
Insulated Circuit Board Jack
.437 HEX
Mounting Hole: D3.218 / D2.218
(Cable Groups 6, 6E,51,52)
Right Angle
50Ω............................................... CBBJR46
75Ω............................................ UCBBJR46
50Ω............................................ CBBJR46A
75Ω.......................................... UCBBJR46A
.687 HEX
.500-28UNEF-2A
.625 HEX
.4375-28UNEF-2A
1.625
Bulkhead Cable Jack
“A” refers to tall versions
1.000
Tool Crimp
MODEL
LTR
NO.
CODE
CBBJR46
UCBBJR46
CBBJR46A
A
UCBBJR46A
A
OHM
50
75
50
75
A
DIM
.046
.029
.046
.029
.096
B
DIM
.24
.24
.34
.34
C
DIM
.090
.090
.090
.090
D
DIM
.050
.050
.058
.058
.806
.437 HEX
50Ω................................. BJ249-
E
DIM
.0625
.0625
.070
.070
.750
DIA
Mounting Hole: D3.218
D2.218 (Cable Groups 6,6E,51,52)
1.237
1.074
.773
.649
ACROSS
POINTS
B
TYP
.380
DIA
.258
TYP
50Ω............................................... CBBJR49
75Ω............................................ UCBBJR49
.13 TYP
.258
TYP
.124
.258
D
TYP
C
TYP
Circuit Board Jack Bulkhead Mount
Right Angle
.030
TYP
.4375-28UNEF-2A
.500-28UNEF-2A
.562 HEX NUT
E DIA TYP
.625 HEX NUT
.4375-28UNEF-2A
.593 DIA
.046
.040
TYP
MODEL
LTR OHM A
B
C
D
E
NO.
CODE
DIM DIM DIM DIM DIM
CBBJR49
50 .046 .24 .090 .050 .0625
UCBBJR49
75 .029 .24 .090 .050 .0625
CBBJR49A
A
50 .046 .34 .090 .058 .070
UCBBJR49A
A
75 .029 .34 .090 .058 .070
.258
TYP
Mounting Hole: D3.156
1.237
1.074
A DIA
.773
.380
DIA
.258
TYP
E DIA
TYP
.258
A DIA
.593 DIA
.046
.649
ACROSS
POINTS
B
.030
TYP
.4375-28UNEF-2A
.500-28UNEF-2A
.562 HEX NUT
CBBJR49 SHOWN
34
“D” mounting holes are on page 54.
.13 TYP
.258
TYP
.124
D
C
.040
TYP
Add “A” for tall versions
Mounting Hole: D3.230
.258
TYP
Coax Connectors / Push-on Coax 120 Series
35
These BNC/TNC push-on jacks and plugs are designed for (U)PL123 blind mate rack and panel applications. The male
plugs mate (U)PL122 with any BNC/TNC jack and are ideally suited for test/cable applications.
Panel Plug
Bulkhead Jack
Front Mount, Solder Pot
Front Mount, Solder Lug
50Ω................................................... PL121
75Ω................................................. UPL121
50Ω................................................... BJ120
75Ω................................................. UBJ120
W/Solder Lug
W/Solder Lug
50Ω............................................... PL121SL
75Ω............................................. UPL121SL
50Ω............................................... BJ120SL
75Ω............................................. UBJ120SL
1.060
.875
.628
.150
SOLDER CUP
ACCEPTS
.068 DIA
CONDUCTOR
Mounting Hole: C2.093
.450
SOLDER POT ACCEPTS
.055 DIA CONDUCTOR;
(.025 DIA FOR UBJ120)
.550
DIA
Mounting Hole: C1.120
.437 HEX
.437 WRENCH FLATS
.3125-32UNEF-2A
3/8 WRENCH FLATS
.375
WRENCHFLATS
.500 HEX
Panel Plug
Cable Plug
Rear Mount, Cable Entry
Wrench Crimp
50Ω............................................ PL12275Ω.......................................... UPL122-
50Ω............................................ PL12375Ω.......................................... UPL123-
.906
.906
.115
.437 HEX
.096
Mounting Hole: DD5.187
.500 HEX
.468-32 SPECIAL
.562 HEX NUT
.437 WRENCH FLATS
BODY .500 DIA
.096
Cable Plug
Tool Crimp
50Ω............................................ PL22375Ω.......................................... UPL2231.107
.607
.349 DIA
COAX CONNECTORS
“D” mounting holes are on page 54.
COAX CONNECTORS
Coax Connectors / 1023 Series
1.0/2.3 DIN Connectors – 75 Ω
Trompeter’s DIN connector series, is manufactured to the DIN
47297 (75 Ω) interface specification. This range of Trompeter’s
DIN 1.0/2.3 connector are 45% smaller than the DIN 1.6/5.6
and is ideal for higher density patching requirements. With
this space savings, significantly more ports can be placed
in the same 1RU panels. The Trompeter 1.0/2.3 series
includes cable plugs, cable jack and Type N to DIN adapters.
Trompeter’s 1.0/2.3 series works with all of the most popular
cables used in the video distribution and telecom central office
environments and can rapidly be adapted to suit any coaxial cable
developments.
This line of 1.0/2.3 connectors delivers the same superior quality
performance of the industry leading Trompeter 220 Series BNC
range. Employing the same tooling and termination as the 220
series BNCs ensures a minimal deployment cost and disruption for
our customers.
Right Angle Crimp Plug
Straight PC Bulkhead Mount Jack
UPLR1023-
UCBBJ1023
21
17.5
4X
0.9
0.5
20
12
M5.5X0.5
5.1
O 0.9
O 7.3
Dimensions are in mm
15
12.7
2.3
Dimensions are in mm
O 5.40
Adapter 75 Ohm Type N Plug to DIN 1.0/2.3 Jack
Straight Crimp Plug
UADF1023M95
UPL1023-
21
32
24
12.7
11.4
O 8
O 1
Dimensions are in mm
Dimensions are in mm
DIN 1.0/2.3 Bulkhead Jack
UBJ102324
12.7
DIN 1.0/2.3 Right Angle PCB Bulkhead Mount Jack
UCBBJR1023
13.25
O 7.3
O 5.4
O 1
21
17
M 5.5 X 0.5
7.4
3.7
3.0
4X
O 7.3
O 0.80
0.81
5.08
Dimensions are in mm
Refer to Cable Group Tables, pages 74-91.
36
Dimensions are in mm
Coax Connectors / 110 Series
1.6/5.6 DIN Connectors
Trompeter’s 110 series connectors are 30% smaller than the
standard BNC currently used for the Coax Central Office
termination. With this space savings, 72 interconnects can be
placed in the same 1 rack unit panels as 52 BNCs. The 110 series
of connectors is available in the following: cable plug, cable jack,
37
a U-Link for connecting two jacks, a right angle circuit board jack,
and BNC to DIN adapters.
Trompeter’s 110 series works with all the cables currently in use in
the central office environment and like all Trompeter connectors,
can be made to accommodate any coax cable changes.
Dual Coaxial DIN Connector “U-Link” 75 Ohm
With Two Plugs
RF Coaxial 75 Ohm DIN
Threaded Full Crimp Cable Plug
Based on 169-13 Specification
UPL110-
105-1496
.939
±.015
C R IMP
S LE E V E
.590
±.010
Ø.410
.300
.488
.580
P IN
C ONTAC T
.500
.634
.380
1.084
RF Coaxial 75 ohm DIN
.450
Jack Threaded Connector
MEETS REQ OF IEC 169-13
UBJ110-
.375
INS ULATOR
WAS HE R S
.990
1.003
±.010
.573
B ODY
AS S Y
S OC K E T
C ONTAC T
M9 X 0.50
LOC K NUT
.500
.579
C R IMP
S LE E V E
S UP P OR T
R ING
Adapter 75 ohm BNC Jack to 75 ohm DIN Plug
Adapter 75 ohm BNC Plug to 75 ohm DIN Jack
UADF20M110
UADM20F110
Ø.410
Ø.593 MAX
B NC P LUG
DIN J AC K
Ø.380
Ø.322
B NC J AC K
DIN P LUG
.580
.471
(1.530)
Refer to Cable Group Tables, pages 74-91.
COAX CONNECTORS
1.263
COAX CONNECTORS
Coax Connectors / Coax Type N Connectors
90 Series
Trompeter’s 90 Series incorporates many of the features of our BNC lines including 3-piece wrench crimp configuration, gold plated
captive center contacts, beryllium copper female contacts, and PTFE dielectrics. The 90 Series will also accommodate non-flammable
plenum coax cables.
Cable Plug
Bulkhead Cable Jack
Wrench Crimp
Wrench Crimp
50Ω.............................................. PL9575Ω............................................ UPL95-
50Ω.............................................. BJ9575Ω............................................ UBJ951.392
.500 OR .688
WRENCH FLATS
.828 DIA MAX
.462
.438 OR .625 FLATS
Large body versions
are available, contact
customer service.
Size depends on cable
group.
.094
.250
.800
DIA
.312 FLATS
.096 OR .130
Mounting Holes: DD4.310
(Standard body)
DD1.310 (Cable Groups
-6A/6B/6E, -48, -50)
.437 HEX NUT
1.274 OR 1.336
.625-24 UNEF-2A
.750 HEX NUT
Adapter
Bulkhead Jack
BNC Female to N Female
Solder Pot
50Ω................................................... AD95
75Ω................................................. UAD95
50Ω....................................................... J95
75Ω..................................................... UJ95
.625-24UNEF-2A
1.287
3/4 HEX NUT
.587
.406
SOLDER POT ACCEPTS
.064 DIA WIRE
Mounting Hole: DD4.310
Mounting Hole: D5.310
3/4 HEX
1.863
.375-32UNEF-2A
.625-24UNEF-2A
.500 HEX NUT
Insulated Adapter
Feed-thru Jack
BNC Female to N Mail
50Ω.................................................. BJ98-2
75Ω............................................... UBJ98-2
50Ω.................................................. ADI95
75Ω................................................ UADI95
.875 MAX
1.860
.833
BJ98-2 Shown
Mounting Hole: DD4.50
Options available for panels up
to 2.25" thick. Call customer
service.
Mounting Hole: DD4.203
.562 WRENCH FLATS
.625-24UNEF-2A
.750 HEX NUT
Refer to Cable Group Tables, pages 74-91.
38
.625-24UNEF-2A
.750 HEX NUT TYP
“D” mounting holes are on page 54.
.50
1.75
Coax Connectors / Coax F Type Connectors
130 Series
Type F Adapter
Between Series Coaxial Female
AD131
BNC to Male F Type Adapter
39
75Ω............................................... AD1300
1.290
.662
1.06 ±.03
F Type Jack
.371
AD1300
75 OHM Coaxial Female BNC
to Male F Type Adapter
.312 WRENCH FLATS
.375-32-2A TYP
.437 HEX
Ø.50
BNC Plug
.437 HEX
AD1300
BNC to F Type Adapter
AD133
BNC MALE TO F TYPE FEMALE ADAPTER
Circuit Board Edge Mount
F Type Style Female Jack
CBJE130-1, -2, or -3
1.000
.650
PART NO
BOARD THICKNESS
CBJE130-1
CBJE130-2
CBJE130-3
.060 - .064
.028 - .033
.090 - .094
BOARD
THICKNESS
Ø.045
.384
.380
.316
.312
.304
RECOMMENDED
CUT-OUT
.250
.375-32UNEF-2A
Ø.400
“D” mounting holes are on page 54.
COAX CONNECTORS
Note: This circuit board jack meets SCTE IPS-SP-401 and has a Return Loss of <-221B at 2 GHz.
COAX CONNECTORS
Coax Connectors / Coax F Type Connectors
130 Series
Trompeter’s 130 Series Coax F Type Connectors meet SCTE-IPS-SP-4-1 and have a Return Loss of <-22 dB at 2 GHz.
75 Ohm Male Type F Type Coaxial Cable Plug
PL130C-(see dash number from chart on right)
1.604
±.030
7/16
HEX
-F1 SHOWN
75 Ohm F Type Tool Crimp Plug
PL130SC-(see dash number from chart on right)
.856
±.018
.556
±.015
7/16 (.4375)
HEX NUT
DASH NO
CABLES ACCOMMODATED
A HEX
-001
-002
RG-178, -196
HEWLETT PACKARD
8120 - 1107
.178
.197
-003
-004
-005
RG-174, 316
RG-179, 187
NORTHERN ELECTRIC
.178
.178
.197
-006
DBL - SHLD RG-187
GC875GPI, GRUMMAN
DBL - SHLD RG-188
.197
-007
-008
275-3991, MICRODOT
RG-195, -180
.178
.178
421-111, ESSEX
-009
75 Ohm Right Angle F Type Style Full Crimp Cable Plug
PLR130SC-(see dash number from chart on right)
1.054
±.030
1.030
±.030
40
.500
8218, BELDEN
YR23023 BELDEN
.178
21-597, ESSEX
-011
.213
-013
RG-58, RG-141,
RG-303, TCC-50-2
RG-59
-013A
-013B
-014
TCC-75-2
RG-62
8212, BELDEN
.255
.255
.255
-015
-015A
-016
730A, LUCENT
RG-71
724, LUCENT
.290
.290
.324
-017
-018
-019
-020
-021
-022
-023
-024
-025
-026
-027
8281, BELDEN
RG-6
9268, BELDEN
8279, BELDEN
9248, BELDEN
88240, BELDEN
88241, 88269, BELDEN
89108, BELDEN
89120, BELDEN
734A, LUCENT
735A, LUCENT
KS19224L2, LUCENT
.344
.255
.255
.290
.213
.255
.255
.290
.255
.178
.178
.255
Coax Connectors / Low VSWR Connectors
Type N Plug
Patch Jack
Patch Plug
Patch Plug
41
Trompeter’s 50Ω low VSWR (1.11:1) patching system has been
developed for use at frequencies up to 3 GHz and at power levels
up to 500 watts. J94 jack accepts a Type N male plug in back and
the PL93 or PL94 in the front of the panels shown, or a custom
panel of your own design. Patch plugs incorporate a push-fit
design that snap into position in the jack and are available with,
or without a bayonet locking feature. Normal jack spacing is 3"
center-to-center. For a minimum bend radius when patching
adjacent jacks, use Trompeter standard patch cords made with
RG8 cable with a minimum length of 14". Otherwise the minimum
length is 18". Panels loaded at no additional cost.
Patch Plug
50Ω, without Locking Sleeve
50Ω, with Locking Sleeve
PL93-
PL94.687 WRENCH FLAT
.625 WRENCH FLAT
.625 WRENCH FLAT
.687 WRENCH FLAT
.760
DIA
.750 DIA
.81
.81
2.12
2.12
.130
.130
Patch Cords
Patch Cords
50Ω, Patch Plug without Locking Sleeve
50Ω, Patch Plug with Locking Sleeve
PCH-L-50
PCHY-L-50
"L"
LENGTH
"L"
LENGTH
Patch Jack to Type N Jack
Panels for J94
50Ω Threaded .62524UNEF-2A
J94
.625-24UNEF-2A
1.000 DIA
3/4 HEX
.140/.036
DIA HOLE
.380/.370
.535
Notching
Panel Type
Height
Part#
12
Open
Common
Ground
A=
1.75"
JSH-12
12
Closed
Insulated
A=
1.75"
JSHI-12
24
Open
Common
Ground
B=
5.25"
JSH-24
24
Closed
Insulated
B=
5.25"
JSHI-24
.640/.630
Mounting Hole: CC1.312
.92
.100
# of Holes
1.82
A
Looping Plug
50Ω - Green Handle
.852
3.250
4.000
3.000
B
2.000 HOLE
4.402
“L” replace with length in inches. “D” mounting holes, page 54. For standard panels see page 53.
COAX CONNECTORS
LPH-50
COAX CONNECTORS
Coax Connectors / 50Ω Subminiature Coax 50 Series
TPS/TCM Jacks & Plugs
Cable Plug
Bulkhead Jack
Wrench Crimp
Front Mount, Solder Pot
50Ω 3-Lug..................................... PL50-
50Ω 3-Lug............................................ BJ50
1.000
.080
.748
.402
SOLDER POT ACCEPTS
.039 DIA CONDUCTOR
PL50-1 Shown
Mounting Hole: D6.218
.375 HEX NUT
.375 WRENCH FLATS
.460 DIA MAX
7/16 HEX
3/8 HEX NUT
.3125-32UNEF-2A
Cable Plug
Bulkhead Jack
Wrench Crimp
Front Mount, Solder Pot
50Ω 3-Lug................................... PL50C75Ω 3-Lug................................... PL50C-
50Ω 3-Lug........................................... BJ57
.140 DIA
.500 HEX NUT
1.143
.560 DIA
.643
PL50C-001 Shown
.485
DIA
MAX
.892
SOLDER POT
ACCEPTS .039 DIA
CONDUCTOR
BJ57 Shown
Mounting Hole: D4.187
.600 DIA
.407
.4375-28UNEF-2A
1.000
Cable Plug
Feed-thru Jack
Wrench Crimp
50Ω 3-Lug........................................... BJ58
50Ω 3-Lug..................................... CJ5050Ω 4-Lug.................................. CJ50FL50Ω Threaded............................. CJ350-
1.070
.620
BJ58 Shown
Mounting Hole: D5.190 /
D4.190 (Threaded)
.790
.080
.500 HEX
.375-32UNEF-2A
7/16 HEX NUT
CJ50-1 Shown
.375 HEX NUT
.375 WRENCH FLATS
.468 DIA MAX
Bulkhead Jack
Wrench Crimp
50Ω 3-Lug..................................... BJ59.790
.590
.600 DIA
Refer to Cable Group Tables, pages 74-91.
42
“D” mounting holes are on page 54.
.080
.375 HEX NUT
.562 HEX
.4375-28UNEF-2A
.500 HEX NUT
BJ59-1 Shown
Mounting Hole: D4.187
Patching Products / High Frequency
Video Patching
Trompeter’s HDVDP and HDVDPM Patch Jacks are designed
and engineered to exceed SMPTE 292M specifications for high
definition video transmission and connectivity.
43
Full Size Patch-Jack
75Ω Terminated & Non-Terminated
The normal-thru contact interface design of HDVDP/HDVDPM
consists of a self-aligning normal-thru U-slot, two redundant
points of contact, an independent applied normal force at each
contact point, and a mechanical wipe region at each contact
interface location. These design attributes provide reliable and
repeatable patching/un-patching, resulting in low-level contact
resistance stability.
HDVDPT
Full-size WECo Format
Terminated
HDVDP
Full-size WECo Format
Non-terminated
HDVDPMT
Mini WECo Format
Terminated
Mini Patch-Jack
75Ω Terminated & Non-Terminated
HDVDPM
Mini WECo Format
Non-terminated
HDVDP/HDVDPM Key Features
• Light weight design:
• HDVDPT (full size): 48.05 grams
• HDVDPMT (mini): 32.1 grams
• High-reliability normal-thru contact design
• Self-wiping normal thru contact design
• Streamlined design for repeatable manufacturability
PATCHING PRODUCTS
Top View of Normal-Thru Contact Interface (2x)
PATCHING PRODUCTS
Patching Products / High Frequency
Video Patching
The HDVDPMN is superior quality, high bandwidth, dual video
patch jack. This low profile, high performance component is
designed for HDTV digital applications where space allocation
is critical, such as in video truck application. It is ideal for
situations where self-normalling is not practical, usually due to
environmental considerations such as high ambient airborne
particles or high vibration.
HDTV Ready High Frequency 75
Ohm Dual Coaxial Mini-WECo Patch
Jack with BNC Receptacles
HDVDPMN
3.295
[ 83,69 ]
1.295
[ 32,89 ]
When used in conjunction with the LPMWHF looping plug, a
“normal-thru” circuit is achieved, which will pass the full 1.485
Gbps of uncompressed data (2.25GHz of frequency) needed for
HDTV, with return loss performance which exceeds SMPTE292M
requirements. This high performance is maintained when
patching from one location to another, using the PCMWB-L patch
cord (call customer service).
.450
[ 11,43 ]
.500
[ 12,7 ]
1.494
[ 37,95 ]
.375
[ 9,53 ]
2X Ø.347
[ 8,81 ]
1.994
[ 50,65 ]
2X .375
[ 9,53 ]
HDTV Ready High Frequency 75
Ohm Dual Coaxial WECo Patch Jack
with BNC Receptacles
HDVDPN
2X Ø.447
[ 11,35 ]
2X Ø.156
[ 3,96 ]
2X .075
[ 1,91 ]
1.375
[ 34,93 ]
1.177
[ 29,9 ]
1.635
[ 41,53 ]
.625
[ 15,88 ]
.600
[ 15,24 ]
2X .570
[ 14,48 ]
2.59
[ 65,9 ]
Note: uses the LPW-75 to normalize the circuit
44
BNC
RECEPTACLES
Patching Products / Coax
Patch Jacks & Accessories
Patch Jacks J15, J24, J314, and HDVDP can be mounted vertically
or horizontally on 5/8" centers. Mounting tabs are normally “backto-back” (as shown below).
45
Adapter
Fixed Paralleling
50Ω BNC - Two Jacks, One Plug
PN2C
Features
• J24 is a high frequency jack w/signals monitoring cabilities
30°
BNC
JACKS
ADAPTER
CIRCUIT
SCHEMATIC
High Frequency Normal-Thru with Monitor
Dual Coax Patch Jack
J24WMSTHF-75
2.09
To be used with grey aluminum insulated panel..JSIS-72 (see page 57).
BNC
PLUG
.750
2.125
Adapter
2.409
Fixed Paralleling
50Ω BNC - One Jack, Two Plugs
.625
1.600
.500
PN2
BNC RECEPTACLES
.156
DIA TYP
.592
.487
.570
.562
.625
2.660
1.185
Adapter
Fixed Paralleling
50Ω BNC - Two Jacks, One Plug
1.600
.500
PN2A
.592
.625
1.185
SCHEMATIC
PATCHING PRODUCTS
Standard Panels see pages 51. R-Resistance (½W, 1%)
PATCHING PRODUCTS
Patching Products / Coax
Patch Jacks
Patch Jack
Patch Jack
BNC Rear Interface
Type N
50Ω RCA Center Pin – .070”..................... J3
75Ω WE Center Pin – .090”................... J3W
50Ω RCA Center Pin – .070”..................... J9
75Ω WE Center Pin – .090”................ UJ9W
.156 DIA MTG HOLE
.156 DIA MTG HOLE
.570
N TYPE RECEPTACLE
.797
Minimum vertical/
.447
.447 DIA horizontal centers .875"
J3W Shown
.570
2.590
2.366
Patch Jack
Patch Jack
TNC
Solder Pot
50Ω RCA Center Pin – .070”..................... J5
75Ω WE Center Pin – .090”................... J5W
50Ω RCA Center Pin – .070”.................. J3D
75Ω WE Center Pin – .090”................ J3WD
.156 DIA MTG HOLE
.081 DIA HOLE IN
SOLDER LUG
SOLDER POT
ACCEPTS
.063 DIA
WIRE
(WECo 468 type)
.500
DIA
TNC RECEPTACLE
.500 DIA
.164
.200
2.420
2.366
Patch Jack
Patch Jack
Cable Entry
Self-terminating
50Ω RCA Center Pin – .070”............. J3E75Ω WE Center Pin – .090”........... J3WE-
BNC 50Ω RCA Center Pin – .070”........ J13-R
75Ω WE Center Pin – .090”.............. J13W-R
.156 MTG HOLE
.447
DIA
.570
WECo 477B Type
1.892
.562
DIA
.500 WRENCH FLATS
.156 DIA MOUNTING HOLE
.375
.812
BNC RECEPTACLE
.570
.281
CABLE
ENTRY
(WECo 447 type) Microswitch not available
J3E-1 Shown
46
TNC 50Ω.......................................... J13H-R
TNC 75Ω...................................... J13WH-R
.560
Standard Panels see pages 51. R-Resistance (½W, 1%)
.447 DIA
2.866
-30° TYP
Patching Products / Standard & Mini-WECo Coax
Patch Plugs
PL1MWLT-(DASH NO)
DASH
NO
-009
Patch Plug
CABLE
ACCOMMODATED
8218, BELDEN
21-597, ESSEX
YR23023, BELDEN
TCC-75-2, TROMPETER
8241F, BELDEN
8212, BELDEN
734A TYPE
735A TYPE
KS19224L2 LUCENT
Patch
Plug
-013A
Shield Crimp
50Ω RCA Center Pin – .070” A=2.73” B=1.50”................... PL1C75Ω WE Center Pin – .090” A=2.45” B=1.22”................. PL1WC-
A
HEX
.178
47
.255
Standard
Crimp Plug with Locking
Tab
-014
.255
-025
PL11SCLT-026
-027
.255
.178
.178
1.876
.437 WRENCH FLATS
.312 WRENCH FLATS
.375 DIA
(WECo 440 type)
1.610
(WECo 358 type)
B
.299
.297
DIA
.508
A
.312 HEX
.375 HEX
Termination Plug
Patch Plug
No Chain
Solder Contact, Crimp Shield
CABLE ENTRY
50Ω RCA Center Pin – .070” A=2.81” B=1.58”...................... TP-1-R PL11CNo Chain
75Ω WE Center Pin – .090” A=2.45” B=1.25”.................... TPW-1-R
.437 WRENCH FLATS
.312 WRENCH FLATS
.375 DIA
B
2.099
.299
.297
DIA
For other chain options, see
page 63.
(WECo 340C type)
(WECo 440 type)
.946
.375 HEX
.375 WRENCH FLATS
.460 OR .590 DIA MAX
A
Adapters
Adapter
Patch Plug to BNC/TNC
75Ω Miniature Patch Plug to 75Ω BNC
50Ω RCA Plug Center Pin .070” 50Ω BNC A= 2.774”................ AD1 ADMW12
50Ω RCA Plug Center Pin .070” 50Ω TNC A= 2.774”.............. ADH1
.570 DIA KNURL
.500 WRENCH FLATS
75Ω WE Center Pin .090” 75Ω BNC A= 2.83”........................ AD1W
.946
75Ω WE Center Pin .090” 75Ω BNC A= 1.93”................... AD1WHD
75Ω WE Center Pin .090” 75Ω TNC A= 2.83”...................... ADH1W .298
BNC
(Mini-WECo type)
A
.471
.375 HEX
(WECo 358 type)
.375 DIA
2.142
Patch Plug
Standard BNC Strip Dimension Crimp Contact, Crimp Shield
PL11SC-
1.818
.946
(WECo 440 Type)
.298
PATCHING PRODUCTS
Refer to Cable Group Tables, pages 74-91.
R = Resistance
PATCHING PRODUCTS
Patching Products / 75Ω Mini-WECo Coax
Patch Jacks
Miniature Patch Jack
BNC Rear Interface
B
J11MW
C
Ø.347
Ø.380
.238
Mini-WECo Type
A
.476
2.210
Miniature Patch Jack
B
BNC Rear Interface
J11MWL
.218
C
Ø.347
Mini-WECo Type
Ø.380
A
.436
3.280
Patch Plug
Miniature Patch Jack
Mini-WECo Crimp Plug with Locking Tab
Cable Entry, Field Serviceable Mini-WECo Type Centers
PL1MWLT-
J12-
PL1MWLT-(DASH NO)
DASH
NO
-009
-013A
-014
-025
-026
-027
Ø.347
1.828
CABLE
ACCOMMODATED
8218, BELDEN
21-597, ESSEX
YR23023, BELDEN
TCC-75-2, TROMPETER
8241F, BELDEN
8212, BELDEN
734A TYPE
735A TYPE
KS19224L2 LUCENT
A
HEX
.178
.128 MTG HOLE
.264
.295
.255
.638
.218
.255
.255
.178
.178
.436
.347 DIA
.375 WRENCH FLATS
Minimum .64"
1.876
1.610
Miniature Patch Jack
.299
.297
DIA
Solder Pot, Mini-WECo Type
.508
J11D
1.761
.312 HEX
.375 HEX
SOLDER POT ACCEPTS
.040 DIA CONDUCTOR
CABLE ENTRY
.400 MAX
1.403
Patch Plug
Mini-WECo BNC Strip Dimension
Crimp Contact, Crimp Shield
PL1MW1.876
±.030
1.568
±.030
Ø.299
Ø.297
.312 HEX
48
.375 HEX
CABLE ENTRY
Patching Products / Standard Coax
Patching & Looping Plugs
Test Point
Pinch
BNC Monitor
49
Standard Coax Looping Plugs
Handle: B=1.51" C=.625" D=1.20"
Center Pin
50Ω RCA
Plain
.070"
LP-Z
Pinch
.070"
LPP-Z
Test Point Single
.070"
LPTP-Z
Test Point Dual
.070"
LP2TP-Z
BNC Monitor
.070"
LPA-Z
2.250
B
C
TROMPETER
ELECTRONICS
D
Plain Handle Shown
Handle: B=1.51" C=1.00" D=1.57"
Center Pin
50Ω RCA
Plain
.070"
LPL-Z
Test Point Single
.070"
LPLTP-Z
BNC Monitor
.070"
LPLA-Z
Handle: B=1.25" C=.625" D=1.20"
Center Pin
75Ω WE
Plain
.090"
LPW-Z
Pinch
.090”
LPPW-Z
Test Point Single
.090”
LPWTP-Z
Test Point Dual
.090”
LPW2TP-Z
BNC Monitor
.090”
LPWA-Z
Handle: B=1.25" C=1.00" D=1.57"
Center Pin
75Ω WE
Plain
.090"
LPLW-Z
Test Point Single
.090”
LPLWTP-Z
BNC Monitor
.090”
LPLWA-Z
Handles are color coded:
Green = 50Ω Violet = 75Ω
PATCHING PRODUCTS
Z = denotes impedance of connecting cable in ohms. Audio Patch Cords also available, please call customer service.
PATCHING PRODUCTS
Coax Connectors / 50Ω Miniature Coax
Patching
Miniature Patch Jack
Patch Cord
TPS Jack 50Ω
Miniature Patch Plugs
3-Lug...................................................... J8
4-Lug.................................................... J8FL
50Ω............................................. PCM-L-50
75Ω............................................. PCM-L-75
TCM Jack 50Ω
Threaded (not shown)......................... J308
TPS RECEPTACLE
.343 HEX
"L"
LENGTH
3125-32-UNEF-2A
PER DOD-HDBK-H28
.375 DIA
.295
DIA
.165
.300
1.362
Miniature Patch Jack
Patch Cord
Solder Pot 50Ω
50Ω Miniature Patch Plug to TPS Plug
J8D
PCMX-L-50
.078 DIA HOLE
"L"
LENGTH
SOLDER POT ACCEPTS
.042 DIA CONDUCTOR
.3125-32-UNEF-2A
.375
DIA
.165
1.049
1.366
Miniature Looping Plug
Adapter
Handle Color: Green = 50Ω............. LPM-50
Handle Color: Violet = 75Ω............. LPM-75
50Ω Miniature Patch Plug to 50Ω TPS Jack
ADM1
2.800
1.940
2.000
1/4 WRENCH FLATS
11/32 HEX
.950
.500
TROMPETER
ELECTRONICS
.227
DIA
Adapter
50Ω Miniature Patch Plug to 50Ω BNC Jack
ADM2
2.116
1.096
.562
PL3 PATCH PLUG
.437 HEX
50
BNC
Z = denotes impedance of connecting cable in ohms. L= denotes length in inches. Call customer service for other miniature coax products.
Patching Products / Standard Panel Specifications
51
Ordering Loaded Panels
Panels can be ordered pre-loaded with any compatible jacks
without additional labor charge by using the following part
number format (provided the mechanical restrictions are
recognized).
Example:
JSI-48A/HDVDP: Standard 48-hole, Insulated Panel (JSI-48A), loaded
with twenty four (24) Standard 75Ω Patch Jacks (HDVDPT)
Trompeter Patch Products
Trompeter offers a wide selection of patching products for Military
Databus, Telemetry, Telecom, Broadcast, CATV, and Testing. We
offer these products for Twinax, Triax, and Coax cabling and in sizes
to meet your space restrictions and environmental requirements.
Standard 19” Panels
Panel Part Number
JS: Aluminum (Gray).................................................................... JS
JSI: Insulated (Gray).................................................................... (I)
JSIB: Insulated (Black)............................................................... (IB)
JSIX: Miniature Triax Insulated (Black)....................................... (IX)
JSMW: Miniature Coax Insulated (Black)................................ (MW)
Jack Part Number............................................................. JACK
In popular sizes and configurations
Available in insulated black phenolic, and insulated or noninsulated aluminum. Aluminum panels are painted standard gray
and come with either a phenolic back bar (insulated type), or
an iridited aluminum back bar (non-insulated type). Aluminum
panels can be painted to suit, or color matched (special order).
Phenolic panels are available in black only.
.1875 x .375
Panel Specifications
Notching
Metal panels (EIA-310-C): Open
Phenolic (EIA-310-C): Closed
Materials
JS Series, Common Ground Panels
Non-insulated
Aluminum
Panel: 6061-T6 Grade Aluminum
Backbar: 6061-T6 Grade Aluminum
Insulated
Phenolic
JSI Series, Insulated Panels
Nylon Bushing
Panels available in heights of 1.75” (1 RU) or 3.5” (2 RU).
JSIB Series, Insulated Panels
Custom Panels & Marking
Panel: Black Arboron
Custom panels can be configured to meet your specifications,
including special wiring, colors, engraving, or silk-screening
(custom marking). Patch jack locations can also be marked on the
rear of the panel for easy location of jacks. Please contact your
local representative.
Hole Plugs
For Jacks and Panels
Hole Diameter
.250”
Part Number
HP250
Miniature Patch Jack (HDVDPM,
.304”
HP304
Standard Patch Jack (HDVDP)
.375”
HP375
Standard Patch Panel (JS, JSI)
.437”
HP437
Standard Patch Panel
.500”
HP500
J11)
HP375
Front Loading Modular Panels are on page 12.
HP437
JSMW Series, Insulated Panel
Panel: Black Arboron
Finishes
Standard Finish
FED-STD-595-26307, Light Gray
Customer Supplied
FED-STD-595# or Paint Chip
Chemical Film Finish
MIL-C-5541, Class 1a (Gold Tone)
MIL-C-5541, Class 3 (Clear)
Indentification
Designation Strip: Passivated Steel
Standard Patch Panels: DS1 .580” x 16.6”
Standard Patch Panels: DS2 .870” x 16.6”
High Density Patch Panels: DS4 .240” x 16.6”
Card: Opaque Vinyl
Window: Clear Vinyl
PATCHING PRODUCTS
Hole Plugs For:
Miniature Patch Panel (J8)
HP304
Panel: 6061-T6 Grade Aluminum
Backbar: XXX Non-hydroscopic Phenolic
Jack Insulation: Nylon Sleeves
PATCHING PRODUCTS
Patching Products / Cable Distribution Panels
Distribution Panels
Table B: Jack/Panel Compatibility
Ordering Loaded Distribution Panels
Example:
*JS - 52 D3SF7 / (U)BJ28
Panel Type - Table A, Col 2
75Ω
Jacks: 2/3/4 Lug
Threaded
Mtg Hole
75Ω
Jacks: 2/3/4 Lug
Threaded
DD4
U
AD 95
DD4
U
ADI 95
D11
BJ 89
BJ389
DD6
BJ 89, BJ893
D 5SF 5
U
BJ 20
DD1
U
BJ 95 Large Body
BJ389
D 3SF 6
U
BJ 21
DD4
U
BJ 95
D 2SF 3
U
BJ 26
DD4
U
BJ 96
D 8SF 12
U
BJ 26GF
DD4
U
BJ 98
D 3SF 7
U
BJ 27
D 2SF 3
BJ 101
D 3SF 7
U
BJ 28/BJ 24
D 2SF 3
BJ 102
D 8SF 11
U
BJ 28GF
DD2SF14
BJ 130
D 2SF 3
U
BJ 29-6 Large body
DD2SF30
BJ 138
D3
UBJ 29
DD2SF30
BJ 139
D 5SF 5
BJ 30
BJ330
D4
BJ 150/FL
BJ3150
Mounting Hole - Table B, Col. 1
D3
BJ 31
BJ331
D9
BJ 152/FL
BJ3152
Jack Type - Table B, Col. 3/4 (“U” designates 75Ω)
D3
BJ 32
BJ332
D 9SF 12
BJ 153/FL
BJ3153
*JS- Non-Insulated Panel (Open notch)
*JSI- Insulated panel (Closed notch)
D 3SF 8
BJ 38
BJ388
D 9SF 12
BJ 154/FL
BJ3154
D3
BJ 39
BJ339
D 9SF 12
BJ 154AC/FL
BJ3154AC
The 19" panels listed in Table A below accommodate the bulkhead
jacks designated by a "•" in Panel Columns A- M of Table B to the
right. For panel specifications: See page 51-54.
D 5SF 5
U
BJ 40
D6
BJ 157/FL
BJ3157
D 3SF 6
U
BJ 41
D 5SF 9
BJ 158/FL
D 2SF 3
U
BJ 46
D 4SF 4
BJ 159/FL
BJ3159
D 8SF 12
U
BJ 46GF
D 4SF 4
BJ 159AC/FL
BJ3159AC
D 3SF 7
U
BJ 47
D 2SF 3
U
BJ 226
D 3SF 7
U
BJ 48
D 8SF 12
U
BJ 226GF
D 8SF 11
U
BJ 48GF
D3
U
BJ 229
D 2SF 3
U
BJ 49-6 Large body
D 2SF 3
U
BJ 246
D 8SF 12
U
BJ 246GF
19.00
HORIZONTAL HOLE SPACING
D MOUNTING HOLES
HEIGHT
D3
UBJ 49
D6
BJ 50/FL
BJ350
D3
BJ 249
D 4SF 2
BJ 57/FL
BJ357
D 4SF 9
-
BJ358
D 5SF 9
BJ 58/FL
DD8
BJ 450
BJ3450
D 4SF 4
BJ 59/FL
BJ359
DD8
BJ 457
BJ3457
D 2SF 8
BJ 72/TL/FL
BJ372
DD8SF31
BJ 459
BJ3459
D 2SF 8
BJ 73/TL/FL
BJ373
D11
D 2SF24
BJ 74/TL/FL
BJ374
D 3SF 7
D 2SF24
BJ 74C/TL/FL
BJ374C
D 4SF 9
--
D 2SF24
BJ 75/TL/FL
BJ375
D 3SF 7
BJ 77/TL/FL
BJ377
D 9SF12
GENERIC DISTRIBUTION PANEL
VERTICAL
HOLE
SPACING
NUMBER OF HOLES
Table A: Panels
Panel Type
# of Holes
Panel Height
Hole Spacing
- Horiz.
JS(I)-12
12
1.75"
1.430"
Hole Spacing
- Vert.
BJ 893 Large body
U
U
BJ2848
Rear mount
-
BJ3158
BJ4828
Rear mount
CBJ155/FL / BJ155
BJ3155
JS(I)-16
16
1.75"
1.000"
--
D 4SF25
JS(I)-20
20
1.75"
0.830"
--
D 3SF13
BJ 78/TL/FL
BJ378
D 5SF10
D 3SF15
BJ 79/TL/FL
BJ379
D 4SF25
J 152FLFT
D 3SF15
BJ 79C/TL/FL
BJ379C
D 4SF25
J152FT
--
U
J 95
JS(I)-24S
24
1.75"
0.723"
JS(I)-24W
24
3.50"
1.430"
1.000"
D 1SF 1
BJ 80, BJ803
BJ380
DD5SF6
PL 122
JS(I)-32
32
3.50"
1.000"
1.000"
D1
BJ 83, BJ833
BJ383
DD8SF31
TBJ 451/FL
JS(I)-40
40
3.50"
0.875"
0.875"
D1
BJ 88, BJ883
BJ388
JS(I)-40W
40
3.50"
0.830"
1.000"
JS(I)-52
52
3.50"
0.675"
1.000"
JS(I)-24
24
5.20"
1.450"
2.250"
Note: Panels are 19" Insulated or Non-Insulated Standard Gray Aluminum. See chart on the right for
loaded panel ordering.
“D” hole specifications are on page 54.
52
Mtg Hole
J3152FT
Patching Products / Standard 19” Panels
1.218
.375
C
B
.450 DIA THRU
C
B
53
.450 DIA THRU
A
FIG A
FIG B
C
B
.450 DIA THRU
B
C
.450 DIA THRU
.750
A
A
FIG C
FIG D
C
C
B
B
.358 DIA THRU
.358 DIA THRU
128 HOLES
A
A
Miniature
1.25
FIG E
C
C
B
B
.358 DIA THRU
36 HOLES
FIG H
.358 DIA THRU
96 HOLES
A
A
FIG I
FIG J
19" Miniature Patch panels for: 50Ω J8 Series, J8D, and 75Ω Mini-WECo Jacks
Panel
Height
Hole Spacing
32
1.75"
N/A
.500
56
1.75"
.500
.500
56
1.75"
.500
.500
64
1.75"
.500
.500
64
1.75"
.500
.500
.500
E
64
1.75"
N/A
.500
.500
A
JS-64
64
3.50"
.500
.500
.500
E
JS-64L
64
3.50"
.500
.500
.500
E
96
3.50"
.500
.500
.500
J
96
3.50"
128
3.50"
.500
H
A
B
Fig
Non-Insulated
Part Number
Insulated Part
Number
Jack Type
.500
A
JS-32
JSI-32
J8 Series
.625
E
JSIX-56S
Mini-WECo
.625
E
JSIX-56SF
Mini-WECo
.500
E
JSIX-64S
Mini-WECo
JSIX-64SF
Mini-WECo
JSI-64S
J8 Series
JSI-64L
J8 Series
C
Not Shown
.500
.500
JSIX-64L
Mini-WECo
JS-96A
JSI-96A
J8 Series
JS-96B
JSI-96B
J8 Series
JSIX-128
Mini-WECo
Miniature 75Ω Coax Patch Panels ... for high density, low VSWR, 75Ω coaxial applications (microwave, sub-carrier telephone systems,
etc.). Trompeter’s J12 jack/ PL11C plug combination has a VSWR of 1:04:1 in the 60-80 MHz range. Miniature 50Ω Coax Patch Panels...
for high density 50Ω patching. 19" panels tapped .312-32-2A to accept J8 and J8D jacks. .50" center-to-center vertical and horizontal
hole spacing (unless otherwise noted), insulated and non-insulated panels have stiffener bars.
Note: For Front Loading Modular Panels, see page 12. “D” mounting hole specifications, see page 54.
Many other panel configurations are available, contact customer service.
PATCHING PRODUCTS
# of Patch
Locations
PATCHING PRODUCTS
Patching Products / Standard 19” Panels
D Hole Specifications
# of Holes
Panel Height
Hole Spacing
Foot Note
A
B
12
1.75"
-
1.43"
1.43"
16
1.75”
-
1.00”
1.00”
Fig
Non-insulated
Part #
Insulated Part #
1
A
JS-12
JSI-12
1
A
JS-16
JSI-16
Insulated Phenolic Part #
C
20
1.75"
-
.830"
.830"
1
A
JS-20
JSI-20
24
1.75"
-
.625"
.750"
1
A
JS-24S
JSI-24S
26
1.75"
-
.625"
.625"
1
A
JS-26
JSI-26
28
1.75"
-
.625"
.625"
1
A
JS-28
JSI-28
32
1.75"
.625"
1.00"
1.00"
2
B
JS-32S
JSI-32S
JSIB-32S
40
1.75"
.625"
.830"
.830"
2
B
JS-40S
JSI-40S
JSIB-40S
48
1.75"
.625"
.625"
.750"
2
B
JS-48S
JSI-48S
JSIB-48S
52
1.75"
.625"
.625"
.625"
2
B
JS-52S
JSI-52S
JSIB-52S
24
3.50"
.625
1.43"
1.43"
2
C
JS-24L
JSI-24L
24
3.50"
1.00"
1.43"
1.43"
1
C
JS-24W
JSI-24W
28
3.50"
.625"
1.21"
1.21"
2
C
JS-28A
JSI-28A
28
3.50"
1.00"
1.21"
1.21"
C
JS-28W
JSI-28W
32
3.50"
.625"
1.00"
1.00"
2
C
JS-32A
JSI-32A
36
3.50
.625"
.625"
.750"
2
I
JS-36
JSI-36
JSIB-32A
36
3.50"
.625"
.830"
.830"
2
C
JS-36A
JSI-36A
40
3.50"
.625"
.830"
.830"
2
C
JS-40
JSI-40
JSIB-40
40
3.50"
1.00"
.830"
.830"
1
C
JS-40W
JSI-40W
JSIB-40W
48
3.50"
.625"
.625"
.750"
2
C
JS-48
JSI-48
JSIB-48
48
3.50"
.625"
.625"
.625"
2
C
JS-48A
JSI-48A
JSIB-48A
52
3.50"
1.00"
.625"
.625"
C
JS-52W
JSI-52W
JSIB-52W
52
3.50"
.625"
.625"
.625"
2
C
JS-52
JSI-52
JSIB-52
56
3.50"
.625"
.625"
.625"
2
C
JS-56
JSI-56
JSIB-56
72
3.50"
.625"
.680"
.680"
3
D
JSS-72
JSIS-72
1 Will not accept dual jacks (e.g. J14, J214, J314, J74, HDVDP) 2 Will not accept jacks requiring hole spacing (A) larger than .625” 3 Will accept 3 barrel jack only
Note: JSIB (Fig. B and C) panels have .459 dia typ.
See page 59 for panel figure diagrams.
“D” Holes
Double “D” Holes
“D” Hole Specifications
Throughout the catalog you will find “D” holes called out for
bulkhead jacks. The “D” hole is the cutout pattern designated
for the proper fit of bulkhead jacks into distribution panels.
A
A
B
B
“D” Hole Type Maximum panel thickness Example: D3.148
Circular Hole
“D” Hole Type
A
B
A
54
B
D1
.755”
.343”
DD1
.630”
.532”
D2
.630”
.281”
DD2
.380”
.312”
D3
.505”
.218”
DD3
.505”
.443”
D4
.439"
.187"
DD4
.630"
.562"
D5
.380"
.156"
DD5
.475"
.436"
D6
.317"
.128"
DD6
.755"
.690"
D7
.281"
.125"
DD7
1.140”
1.060”
D8
.605"
.280"
DD8
.330"
.274"
D9
.567"
.257"
D10
.192"
.079"
D11
1.005”
.470”
Many other panel hole configurations available, contact customer service.
Double Circular Hole
A
Double “D” Hole
C1
.317"-321"
CC1
C2
.380"-.385"
A
.630"
C3
.442"-.447"
B
.370"
C4
.474"-.480"
C
.136"-.140"
C5
.505"-.510"
C6
.755"-.760"
Circular Holes
A
A
B
C
Patching Products / Custom Cable Assemblies
55
Custom Cable Assembly Lines
Trompeter’s coax patch cords and cable assemblies are of the
highest quality and can be ordered in any length. Trompeter
normally stocks popular lengths of 6”, 12”, 18”, 24”, 36”, 48”, 60”,
and 72”. Standard coax patch cords and cable assemblies are made
with the following cables: Patch Cords and Cable Assemblies are
available in 50Ω RCA Standard or 75Ω Western Electric (WECo)
Standard. The two standards are not intermateable. Trompeter
stocks many other connector types for quick turnaround of
custom cable assemblies including:
D-Subs & Backshells:
Male & Female 9, 15, 25, 37 pin and more
SMA/SMB/SMCs:
Straight and Right Angles for RG-58, RG-142, RG-174,
RG-188, RG-316, and RG-400
Impedance
Cable Type
Trompeter Cabl
Part #
50Ω
RG-58
TCC-50-2
75Ω
RG-59
TCC-75-2
93Ω
RG-62
N/A
Patch Cords (see p/n below) Patch Plug to Patch Plug
Cable Assembly BNC Plug to BNC Plug
50Ω RCA Plug Center Pin .070”......... PC-L-Z
75Ω WE Center Pin .090”.............. PCW-L-Z
75Ω Mini-WECo......................... PCMW-L-Z
Tool Crimp BNC
50Ω.............................................. PCYC-L-Z
75Ω............................................ UPCYC-L-Z
"L"
LENGTH
"L"
LENGTH
Cable Assembly Patch Plug to Push-on Plug
Cable Assembly BNC Plug to BNC Plug
Wrench Crimp
50Ω RCA Plug Center Pin .070” to 50Ω Push-on............... PCPX-L-Z 50Ω BNC......................................... PCY-L-Z
50Ω RCA Plug Center Pin .070” to 75Ω Push-on............. UPCPX-L-Z 75Ω BNC...................................... UPCY-L-Z
75Ω WE Center Pin .090” to 50Ω Push-on..................... PCPWX-L-Z
75Ω WE Center Pin .090” to 75Ω Push-on.................. UPCPWX-L-Z
"L"
LENGTH
"L"
LENGTH
Cable Assembly Patch Plug to BNC Plug
50Ω RCA Plug Center Pin .070” to 50Ω BNC....................... PCX-L-Z
50Ω RCA Plug Center Pin .070” to 75Ω BNC..................... UPCX-L-Z
75Ω We Center Pin .090” to 50Ω BNC............................. PCWX-L-Z
75Ω We Center Pin .090” to 75Ω BNC........................... UPCWX-L-Z
Z = denotes impedance of connecting cable in ohms. L= denotes length in inches.
PATCHING PRODUCTS
"L"
LENGTH
PATCHING PRODUCTS
Patching Products / Custom Cable Assemblies
Custom Cable Assemblies
Trompeter has been producing high quality cable assemblies, and
currently provides over 500,000 different configurations using a
broad range of RF connectors and cable types. We stock a variety
of components for camera, RGB, S-Video, Audio, and many other
applications.
Capabilities
Trompeter can provide coax, twinax, and triax cable assemblies
using any cable attached connector. This includes panel mount,
data bus, multi-pin , D-Subs, SMA connectors, and patching
products. Special marking (ID sleeves/tags, hot stamping,
colored cable jacket, etc.) is available. Trompeter offers 24-48
hour turnaround on many standard products with full capabilities
for sustained volume delivery. Deliveries can be adjusted to meet
your specific needs.
Quality Assurance... ISO 9001 Registered
Photo: Twinax/Triax connectors on ruggedized dual twinax/triax test cable (fire retardant cables).
Trompeter’s assemblies are 100% electrically tested for continuity,
shorts, and Hi-Pot.
(VSWR, IR, Insertion / Return Loss test capabilities, SPC data
available on request).
Request For Quote...
Please refer to the following guideline when requesting a quote:
1
1
2
3
4
5
6
2
3
4
5
6
Qty
Conn 1
/
Cable
/
Conn 2
/
Length
/
Special Requirements
12
UPL220
/
735A
/
PL11C
/
60”
/
Bend relief on Conn 1
/
/
/
/
/
/
/
/
Quantity ...........................................................................Select quantity
Conn1 ............................................. Select connector type from catalog
Cable ...................................................... Select cable from pages 74–91
Conn2 .............................................. Select connector type from catalog
Length .......................................................................................In inches
Write out any special marking, testing, bend relief, packaging, or other requirements.
Example Shown: 60 inch coax cable assembly using AT&T 735A, BNC plug, and Mini-WECo patch plug with bend relief on BNC plug.
56
Patching Products / Coax RFI Caps & Terminations
Coax Terminations and RFI (Dust Caps)
Trompeter provides termination and RFI cap for all our connectors.
Resistors are normally ¼ watt for subminiature connectors and ½ watt
for miniature and standard size connectors (1% tolerances for all).
Ordering Instructions
For Terminations Example: PL75 Termination for TRB jacks with 78Ω
resistance and no chain.
Order part number:
TNG1-6-78-D3
Part number from list
Chain options
R-Resistance
D Ring option (see below)
57
Chain Options
Length
Chain Type
Chain Numbers
N/A
No Chain
-1
-4
3.0"
Brass Chain
6.0"
Brass Chain
-6
10.0"
Brass Chain
-10
3.0"
Jacketed Stainless-steel rope
-13
6.0"
Jacketed Stainless-steel rope
-14
Stainless-steel rope
Stainless Steel Rope with Mounting Rings
For RFI Caps Example: Patch plug cap for a J74 twinax/triax jack with
no chain.
Order part number:
Part number from list
Chain options
D Ring option (see below)
RFI70-6-D3
We now provide stainless steel rope with “D” rings. To order
mounting ring for jacks with the “D” mounting hole numbers
listed on the right, add the “D” ring number to the part number.
For Example: RFI20-12-D2
D Ring Options
Inside Diameter
DRing#
Inside Diameter
DRing#
.755"
-D1
.281"
-D7
.630”-.635”
-D2
.610”
-D8
.505”-.510”
-D3
.567”
-D9
.439”-.443”
-D4
.380”-.384”
-D5
Coax Terminations & RFI Caps
Description
Terminator
RFI (Dust Caps)
BNC, Jack
(U)TNASP1-(3)-R (Push on)
RFI25-(3)
BJ20/CJ20 Series
BNC, Jack
(U)TNAS1-(3)-R (Short)
RFI25-(3)
BJ20/CJ20 Series
BNC, Jack
(U)TNA1-(3)-R
RFI25-(3)
BJ20/CJ20
BNC, Jack
(U)TNAP1-(3)-R
RFI25-(3)
BJ40/CJ40 Series
TNC, Jack
(U)TNH1-(3)-R
RFI45-(3)
BJ50/CJ50 Series
TPS, Jack
TNB1-(3)-R (Push on)
RFI55-(3)
BJ50FL Series
TPS, Jack
TNBP1-(3)-R (Push on)
RFI55FL-(3)
BJ50/BJ350
TPS/TCM, Jack
TNBP1-(3)-R (Push on)
RFI355-(3)
BJ95
N, Jack
(U)TNN1-(3)-R
RFI95-(3)
BJ130
F, Jack
TNF1-(3)-R
RFI130-(3)
J3
RCA, Patch Jack
TP-(3)-R
RFI20-(3)
J3W
WECo Patch Jack
TPW-(3)-R
RFI20-(3)
J8
Mini-WECo Coax Patch Jack
TPM-(3)-R
RFI50-(3)
J11
Mini-WECo Patch Jack
TPMW-(3)-R
RFI150-(3)
J94 (90 Series)
Patch Jack
TNP1-(3)-R
RFI94-(3)
J94 (90 Series)
Patch Jack
TPP-(3)-50 (Push-on)
RFI94-(3)
PL20 Series
BNC, Plug
(U)TNAF1-(3)-R
RFI21-(3)
PL50
TPS, Plug
PL220 Series
BNC, Plug
(U)TNAF1-(3)-R
RFI21-(3)
PL40 Series
TNC, Plug
(U)TNHF1-(3)-R
RFI41-(3)
PL95
N, Plug
(U)TNNBJ1-(3)-R (Bulkhead Mount)
RFI97-(3)/ RFIS97-(3)Safety wire
RFI57-(3)
Notes: (3) See Chain options. “U: Designates 75 ohm version available. “R” Resistance. If you cannot find the RFI cap or termination, contact customer service.
PATCHING PRODUCTS
Parts to be capped
BJ20/CJ20 Series
PATCHING PRODUCTS
Patching Products / Adapters
Circuitry Schematics
Custom Adapters Ordering Format
Adapters indexed with a designated number are standard adapters, refer to page 46 for identifications. Adapters index with a “•” are
custom adapters and may be ordered using the example below. For adapters not referenced contact customer service.
Schematic
Conn #1
Conn #2
Ordering Example:
Conn #1
BJ20
Schematic
E1
Conn # 2
PL75
ADBJ20 - E1 - PL75
Bnc Jack
Circuit Code
TRB Plug
Adapter Circuitry Schematics
Concentric Twinax/Triax to
Concentric Twinax/Triax
2-Pin Twinax to
2-Pin Twinax
Coax 2-Pin Twinax
Coax to Concentric
Twinax/Triax
2-Pin Twinax
to Concentric Twinax/Triax
A1
C1
D1
E1
G1
K1
A2
C2
D2
E2
G2
K2
A3
C3
D3
E3
G3
K3
A4
C4
D4
E4
G4
A5
C5
D5
E5
A6
C6
D6
BLUE CENTER COND
A7
C7
D7
D8
A8
BLUE CENTER COND
58
Coax to Coax
BLUE CENTER COND
Patching Products / Adapter Table
Coax to Coax
59
Coax to Coax Adapters
Adapter Table Notes:
Adapters indexed with a number are Standard Adapters.
BJ59
CJ50
CJ50FL
PL50
PL50FL
PL53
BJ20
BJ26
BJ29
CJ20
PL20
PL21
BJ120
PL121
PL122
PL123
BJ40
BJ46
BJ49
CJ40
PL40
PL41
BJ130
BJ139
PL130
PL93
PL94
BJ95
BJ96
J95
PL95
PL195
RCA
J3
J12
PL1
PL11
PL1W
PL1WC
J3W
PL2W
PL3
50 Ohm Min.
BJ350
CJ350
Adapters indexed with “•” are Custom Adapters.
-
Insulated
Bulkhead Mount
75 Ohm Available
Female
Male
TPS
TCM
BNC
U
U
U
U
U
BJ50
BJ59
BJ59FL
CJ50
CJ50FL
PL50
PL50FL
BJ350
BJ359
CJ350
PL350
PL350S
BJ20
BJ26
BJ29
CJ20
PL20
U BJ49
U BJ40
U BJ46
U CJ40
U PL40
U PL122
PUSH-ON U PL123
BJ130
F
BJ139
PL93
LVSWR
PL94
U BJ95
U BJ96
N
U
J95
U PL95
J3
RCA
PL1
PL11
J3W
J3WC
WECo
J3WE
J9W
TNC
F
F
F
F
F
M
M
F
F
F
M
M
F
F
F
F
M
F
F
F
F
M
M
M
F
F
M
M
F
F
F
M
F
M
M
F
F
F
F
PUSH-ON
TNC
F
LVSWR
U
U
U
U
U
U
U
U
U
U
U
U
U
U
U
U
I
B
U
F
M
BNC
F F
B
F M M M F F F
B
I
17
17 17
B
B
N
WECo
Mini-WECo
F M M F M M M F F F F M M F F M M M F
B
B
B
B B
B
I
F F M M F F M M M M F M
B B
I
42
17
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
M F F
B
48
•
•
•
•
•
•
•
TCM
U
U
U
U
TPS
51
48
•
•
•
B
•
B
B
•
•
•
•
I
•
•
•
•
•
B
•
•
•
•
•
•
•
• 13
27
13
• •
7
• •
•
•
•
•
B
•
•
I
B
B
B
B
J12
PL2W
PL1W
F B
M
M
50 Ohm
Min.
J8D
PL3C
F
M
•
•
•
•
•
•
•
•
•
•
•
•
•
• •
56
4
50
57
57
57
51
•
14
30
30
•
1
14
30
1
•
•
5 •
6 •
• • •
•
56
4
50
57
57
57
7
•
•
•
•
•
•
•
•
•
•
7
•
•
•
•
•
•
•
27 • 13 •
27
27 •
•
27
13
• •
•
• • 16
•
11 • 2 16 • 2 •
• 16 16 16 16 •
11
2 16
2
• • • • •
•
• 11
11 •
• • • • •
•
• •
• • • •
4
•
•
•
•
•
•
•
•
•
•
•
•
• •
•
•
62
46
62
46
63
63
63
63
63
63
•
•
•
•
•
•
•
•
8
•
•
•
10
•
•
8
5 6
5 6
• •
•
•
•
•
•
•
9 43
43 43
•
•
61
61
61
45
45
49
49
66
For adapters not listed, call customer service.
24 24
24
•
•
56 56 4 50 45
57
•
56 52 4 50 45
•
57
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
• •
4
• •
• •
•
•
20
20 •
• •
• 20 •
•
• •
• •
64
62
46
47
63
62
46
47
63
47
49
•
•
•
•
65
65
65
•
•
61
•
•
47
49 •
•
•
•
60
•
•
•
•
52 •
48
“D” mounting holes are on page 54.
•
•
•
•
27 • 13 •
27
27 •
27
13
• •
•
7 •
• • • •
• • • 10
•
•
5
6
I
•
14
14
14
14
•
•
•
•
•
13
27
•
13
•
•
•
• •
•
•
58 58
PATCHING PRODUCTS
MiniWECo
•
•
•
•
• 1
14
•
1
• •
Coax/Twinax/Triax
Coax/Twinax/Triax Adapters
-
TRS
TTM
TRB
TRT
TWBNC
TWTNC
TRC/
TRN
PATCH
60
Insulated
Bulkhead Mount
75 Ohm Available
Female
Male
TNC
N
TRS
TTM
TRB
TRC/TRN
U
U
U
U
U
U
U
U
U
U
U
U
U
U
U
U
U
U
I
B
U
F
M
PUSH
ON
BNC
BJ50
PL50
BJ350
TCM
BJ20
BJ26
BJ29
CJ20
PL20
PL21
PL122
PL123
BJ40
BJ49
CJ40
PL40
PL41
BJ46
BJ95
BJ96
J95
PL95
BJ157
BJ157FL
BJ159
BJ159FL
CJ150
CJ150FL
PL155
BJ3157
BJ3159
CJ3150
PL3155
BJ74
BJ74FL
BJ74TL
CJ80
CJ380
PL80
PL380
TPS
F
M
F
F
F
F
F
M
M
M
M
F
F
F
M
M
F
F
F
F
M
F
F
F
F
F
F
M
F
F
F
M
F
F
F
F
F
M
M
PATCHING PRODUCTS
Patching Products / Adapter Table
BJ154
BJ154FL
BJ157
BJ157FL
BJ159
BJ159FL
CJ150
CJ150FL
PL150
PL153
PL155
PL155FL
BJ3154
BJ3159
CJ3150
PL3155
BJ74
BJ74TL
BJ74FL
BJ77
BJ77TL
BJ77FL
BJ79
BJ79TL
BJ79FL
BJ79TLRG
CJ70
CJ70TL
CJ70FL
PL71
PL73
PL74
PL75
PL75FL
PL375
BJ374
BJ377
BJ379
BJ379RG
CJ370
BJ30
BJ39
CJ30
PL30
BJ330
BJ339
PL330
BJ89
BJ89F
BJ893
BJ893F
CJ80
CJ380
CJ803
PL80
PL380
PL803
BJ389
BJ389F
J72D
J150
PL150
F
F
F
F
F
F
F
F
M
M
M
M
F
F
F
M
F
F
F
F
F
F
F
F
F
F
F
F
F
M
M
M
M
M
M
F
F
F
F
F
F
F
F
M
F
F
M
F
F
F
F
F
F
F
M
M
M
F
F
F
F
M
B
B
B B
I
• • •
• • •
I
I
•
•
B
B
• •
• •
•
•
•
•
B B B
I
I
•
•
•
•
B B
32
22
59
B
B
B
B
I
B
B
B
I
I
I
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
B
B
B
B
•
•
•
•
•
•
•
•
•
•
•
•
•
•
B
•
•
•
•
•
•
•
•
•
•
•
•
I
B
B
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
• •
•
• •
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
• •
• •
• •
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
32
22
59
22
23
32
59
23
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
22
59
•
•
•
•
•
•
•
•
•
•
•
•
22
B B B
I I I
32
23
23
•
•
•
•
•
•
B
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
• •
• •
• •
•
•
•
•
•
•
•
•
•
•
•
•
•
68 68 68
31 31 31
33 31 33
•
•
18
•
•
•
• • • 18
•
• • • •
•
• • • •
•
•
18
•
18
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
B
B
B
B
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
• •
• •
•
•
• •
• •
• •
• •
• •
• •
•
• •
•
•
•
• •
•
•
•
•
•
•
•
•
•
•
• •
•
• •
•
•
•
•
•
•
B
B
B
B
B
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
41
• •
• •
38
53 54
•
•
•
•
•
•
•
•
19
•
• •
• •
39 • •
40
• •
•
B
•
•
39
40
• • •
• 39 •
40 • •
•
•
55
55
•
•
•
•
•
•
•
•
Patching Products / Adapter Table
Coax/Twinax/Triax & Indentifications
61
Coax/Twinax/Triax Adapters Continued...
TRB
Insulated
Bulkhead Mount
75 Ohm Available
Female
Male
TRT
TWBNC
TWTNC
BJ77
BJ77FL
BJ77TL
BJ79
CJ70
CJ70FL
CJ70TL
PL74
PL75
PL75FL
BJ374
BJ377
BJ379
CJ370
PL375
BJ30
BJ39
CJ30
PL30
BJ330
BJ339
CJ330
PL330
-
Adapters indexed with a designated number are
standard adapters, use the table below to determine
the part number. Adapters indexed with a “•” are
custom adapters, see page 59.
F
F
F
F
F
F
F
M
M
M
F
F
F
F
M
F
F
F
M
F
F
F
M
I
B
U
F
M
B
TRS
TTM
TRB
TRT
TWBNC
TWTNC
TRC/
TRN
F
F
F
F
F
F
F
F
M
M
M
M
B
B
BJ3154
BJ3159
CJ3150
PL3155
BJ74
BJ74TL
BJ74FL
BJ77
BJ77TL
BJ77FL
BJ79
BJ79TL
BJ79FL
BJ79TLRG
CJ70
CJ70TL
CJ70FL
PL71
PL73
PL74
PL75
PL75FL
F
F
F
M
F
B
F
F
F
F
F
F
F
F
F
F
F
M
M
M
M
M
B
B
PL375
BJ374
•
BJ377
BJ379
BJ379RG
CJ370
BJ30
BJ39
CJ30
PL30
BJ330
BJ339
PL330
BJ89
BJ89F
BJ893
BJ893F
CJ80
CJ380
CJ803
PL80
PL380
PL803
BJ389
BJ389F
M
F B
F
F
F
F
F
F
F
M
F
F
M
F
F
F
F
F
F
F
M
M
M
F
F
J72D
J150
PL150
F B
F B
M
I
I
• •
• •
•
•
•
•
B
B
B
B
B
•
•
•
•
•
•
•
•
I
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
I
•
•
28
•
•
39 •
40
•
3 • •
•
• • 29 •
• 28 •
•
34
•
35 •
36
•
•
•
•
•
•
•
•
•
•
Standard Adapters Identification numbers:
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
• •
•
•
•
•
•
•
•
•
•
•
•
• •
• •
• •
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
• •
• •
•
•
•
•
•
•
•
•
• •
•
• 25
25 25 25 •
• •
•
•
•
•
•
• 25
12 26 12 •
• 25 26 26 26 •
• •
•
• •
•
• •
• •
• •
•
•
•
•
•
•
25 12 26 12
B
•
•
•
• •
• •
• •
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
B
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
B
B
B
B
•
•
•
•
• •
•
B
B
67
67
•
•
•
•
•
•
•
•
•
•
•
•
•
•
B
•
•
•
•
•
•
•
•
•
18
B
•
•
•
•
• 34 3
29
29
•
28
•
•
B
B
•
•
•
•
•
•
•
• 18
39
• •
34
29 •
28
•
34 •
• 34
• • 35
• 36 •
3
•
•
•
•
•
•
• •
• •
• •
• •
I 18 •
I • •
I • 40
3
B
B
B
B
•
•
B
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
37
37
•
•
•
•
•
•
•
•
•
•
• • •
15 • •
• 15 15 15
•
• • 15
•
• •
•
• • • •
• •
37
• •
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
37
ID#
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
Part Number
(U)AD28
(U)AD48
AD78 (Note 2)
AD1
(U)AD95
(U)ADI95
ADI22
AD130
AD131
AD133
(U)AD142
AD378
(U)AD2848
(U)BJ28
BJ38 (Note 3)
(U)BJ48
BJ58
BJ73 (Note 2)
BJ88
(U)BJ98
BJ158 (Note 4)
BJ158FL (Note 5)
BJ358
BJ373
BJ378
(Note 1)
AD78FL
AD78TL
BJ24
BJ3158 (Note 6)
AD158
AD3158
BJ78
BJ78TL
BJ78FL
BJ338
BJ388 (Note 7)
BJ73TL
BJ73FL
ID#
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
Part Number
BJ883
BJ58FL
BJ138
AD192
AD1W
ADH1
ADH1W
ADM1 (Note 8)
ADM2 (Note 8)
ADMW12 (Note 9)
J11 (Note 9)
J11B (Note 9)
J152 (Note 11)
J152FL (Note 12)
J3152 (Note 13)
J3
J3W
(Note 10)
AD158FL
J3F
J3WF
J5
J5W
(U)J9
(U)J9W
J8
J72
BJ3153
(U) = 75 ohm version available (Note) = See below
Standard Adapter notes:
Note:
1
2
3
4
5
7
8
9
10
11
12
13
Bulkhead Mounted BNC Side
(U)BJ4828
Bulkhead Mounted TNC Side
(U)BJ2848
Polarization Table (Callcustomer service)
Insulated Version
BJ33
Insulated Version
BJ153
Insulated Version
BJ153FL
Insulated Version
BJ383
50 Ohm Version Only
75 Ohm Version Only
J308 50 Ohm TCM Jack Threaded
Panel Mount J8D
J311 75 Ohm TCM Jack to J8D
J152
Threaded Panel Mount
Threaded Panel Mount
J152FLFT
Threaded Panel Mount
J3152FT
PATCHING PRODUCTS
PATCH
BJ154
BJ154FL
BJ157
BJ157FL
BJ159
BJ159FL
CJ150
CJ150FL
PL150
PL153
PL155
PL155FL
B
I
TOOLS & ACCESSORIES
Tools & Accessories
Cable Strippers
Powered Cable Stripper
This powerful, low-cost, portable hand-held (less than 2.25 lbs)
cable stripper delivers, production quality performance, and
gives you up to 250 strips per charge (7.2 V Ni-cad battery without
memory effect). The replaceable, 3-level cutter head, is preset to
strip your coax cable for Trompeter’s 220 Series, Tool Crimp BNC
connectors. The cutter head has adjustable depth cutter blades
for precision tuning. Precision ground, tool steel blades (hardens
to Rockwell 64) give you up to 15,000 strips! Rapid Charger/
Reconditioner recharges your Ni-Cad in only 1.5 hours! Fast
charge: 1.5 hrs/Recondition in 3.1 hrs.
Cutter Head Guide
Cable Outside Diameter
2-Blade Cut
3-Blade Cut
D-Ring#
.070-.110
C24T2A
C24T3A
-D7
.160-.215
C24T2B
C24T3B
-D8
.190-.230
C24T2C
C24T3C
-D9
.235-.270
C24T2D
C24T3D
-DD8
.300-.430
C24T2E
C24T3E
.110-.160
C24T2I
C24T3I
.271-.305
C24T2U
C24T3U
Important Note: The 3-level cutter heads included in the kits are set
to the same stripping dimensions as our STC-F (see below) stripping
cassette for Trompeter “Tool Crimp” BNC cable connectors.
Use 2-level cutter heads for Trompeter “Wrench Crimp” BNC
cable connectors.
Additional Accessories
Extra Cutter heads
See guide above
DC Driver Battery: Requires cutter head from above
BCS
Powered Cable Stripper Kits (1-year Warranty)
Includes: 1 Driver, 1 Ni-Cad Battery Pack, 1 Cutter Head, 1 Rapid
Charger/Reconditioner Station, and 1 Carrying Case.
Cable Type Stripper/Cutter head
For RG-59
BCS/C24T3D
For 8281
BCS/C24T3U
Manual Cable Stripping Tools
AC Driver and AC Base Unit: Requires cutter head from above
ACS
Rapid Charger/Reconditioner
BRCC
Ni-Cad Battery Pack
ABP-NSA
AC Power Converter
ACC-NSA
Manual Cable Stripping Tool
Tool (only) - Requires blade cassette listed
ST1
Cassette (For Tool Crimp BNC Connectors)
STC-F
Cassette (For Wrench Crimp BNC Connectors)
STC-W
3.525
Cable Cutting Tool
1.3
1.175
TROMPETER ELECTRONICS INC.
Designed to cut Coax cable without compressing dielectric or
damaging center conductor.
Cutting Tool
700-0024
1.405
STC-W
GRAY
.625
.156
.330
STC-F
LT GREEN
62
.625
.108
Tools & Accessories
63
Crimp Tools
Crimp Tool
Die not included, for crimp dies see below
Frame CT 5
.50
.236
D Crimp
C Crimp
8-Point Crimp Tool
BNC/Pl11 Patch Plugs (Red/Blue)................................... 010-0097
BNC Jack and plug (Blue)............................................... 010-0088
CD3-1
.175 DIA
2PL
75Ω Center Contact Pin (Handle Color)
1.260
B Closure
12-Point Crimp Tool
A Closure
75Ω Center Contact Pin (Handle color)
BNC/TNC/Pl11 Patch Plug
.697
Max
(Green/yellow).............................................................. 010-0098
For crimp dies not listed or for special embossing, call customer service.
Outer Sleeve
A
Embosses
B
Embosses
CD3-1
.213
1A
.178
1B
CD3-19
.178
178
.255
255
Outer Sleeve
A
Embosses
B
Embosses
CD3-1
.213
1A
.178
1B
CD3-2
.324
2A
.255
2B
CD3-3
.344
3A
.290
3B
CD3-5
-
-
.197
5B
CD3-19
-
-
CD3-21
.290
290
.255
255
CD3-22
.404
404
.068
-
For crimp dies not listed, call customer service.
.344 HEX CRIMP
CD5-8
CD5-8
.263 SHEILD CRIMP
Twinax/Triax Crimp Tool
For Bushing/Shield
Crimp Tool Only....................................................... M22520/5-01
Crimp Tool with Die..................................... M22520/5-01/CD5-#
CD5-8 SHOWN
(1.000)
.527
For Standard and Miniature Twinax/Triax patching: 70 Series: TRB/TRT,
150 Series: TRS/TTM, 450 Series: 2-lug/3-lug/threaded connectors.
Cable Type
Cable Group #
Bushing/Shield Crimp Die
Center Contact Crimp Tool Part #
Center Contact Positioner Part #
70C
Twinax
201-225
CD5-8
M22520/1-01
PLR70C
PLR155AC
Triax
301-309
CD5-10
010-0044 Pin (TP837)
010-0045 Socket (TP838)
Small Body 150AC
Twinax
201-206, 208, 209, 217-223
CD5-9
M22520/2-01
010-0041
Triax
301-304, 309
CD5-11
Twinax
207, 210, 211-216, 224-225
CD5-8
M22520/2-01
010-0043
Triax
305-306, 308
CD5-13
Triax
307
CD5-10
M22520/1-01
010-0044 Pin (TP837)
010-0045 Socket (TP838)
Large Body 150AC
PL75MC
Twinax
201-225
CD5-14
M22520/2-01
010-0096
226
CD5-15
M22520/2-01
010-0096
450AC
Twinax
201-206, 208, 209, 212, 217-223
CD5-9
M22520/2-01
010-0041
PLR450
Twinax
201-206, 208, 209, 212, 217-223
CD5-120
M22520/2-01
010-0041
SPC8P
Twinax
201-205, 217, 218, 221, 222
CD5-4
M22520/2-01
Daniels K709
SPC8S
Triax
301-303
CD5-7
* Note: Dies imprint either cavity (A/B) or hex size onto crimp sleeve. Custom dies are available for special imprints.
TOOLS & ACCESSORIES
Connector Series
TOOLS & ACCESSORIES
Tools & Accessories
Cable Assembly Testers
Twinax/Triax Cable Assembly Tester
BNC Coax Tester
Coax Cable Assembly Connector Test Set
75Ω BNC Plug................................................................. 010-0133
75Ω MBNC Plug.............................................................. 010-0208
Mini-WECo Adapter (Continuity Only)
Twinax/Triax Cable Assembly Connector Test Set
010-0123-1
The Twinax/Triax Cable Assembly Tester is designed to test for
opens, shorts, and cross wired connectors. The tester comes
complete with terminators and testing instructions. This tool is
designed to provide quick verification of TRB cable assemblies in
the palm of your hands. The compact hand held unit measures
2 3/4" x 4 1/2" and provides versatility for testing connectors in
the field. The unit comes in a soft zipper case which includes a
9v battery and terminators for standard TRB plugs. It can also be
used for other connector families with an adapter, or short jumper
cable when used with the proper termination.
• 3 Conductors which test for opens, shorts, and cross connects
• Concentric TRB Interface, which tests both Twinax and Triax
• Pass/Open/Short LED indicators
• Easy to follow testing instructions
• Complete with terminators, carrying case, and a 9V battery
64
Sold Separately
105-1885
Designed to test for the proper assembly of BNC plugs with coax
cables. Tests for center contact pin height and continuity (short
or open). The new BNC tester is the same size as the twinax/triax
tester but exclusively tests only BNC plugs. Mini-WECo continuity
test adapter now available (sold separately).
• Compact design
• Pass/Open/Short LED indicators
• One test required for testing remote cable runs
• Easy to follow instructions
• Complete with terminators, case, and 9V battery
• On/Off switch
Tools & Accessories
65
Tool Kit & Bulk Packaging
Tool Kits
Tool Kit Part
Number
Pin Height
Indicator
Crimp Tool
8-Point Indentor
Crimp Tool
12-Point
Indentor
BNC/Mini-WECo
Electrical Gauge
Crimp Die
Center Contact
Gauge
TK4NL-1
UPLCG-1
010-0097
Not Included
Not Included
CD3-19
Not Included
TK4NL-1A
UPLCG-1
010-0097
Not Included
Not Included
CD3-19
Not Included
TK4NL-2
UPLCG-1
Not Included
010-0098
Not Included
CD3-19
Not Included
TK4NL-3
UPLCG-1
010-0097
010-0098
Not Included
CD3-19
Not Included
TK4NL-4
Not Included
010-0097
Not Included
010-0108
CD3-19
Not Included
TK4NL-5
Not Included
Not Included
010-0080
010-0108
CD3-19
010-0101
All Tool Kits Include: Case, BCS Cable Stripper with BCS Cutter heads (one C24T3D and one
C24T3I), Cable Cutter (part number 700-0024), and Ergonomic Crimp Tool w/long handle
CT4L with Crimp Die CD3-19 embosses the die cavity size on the crimp sleeve either .178
or .255. Contact customer service for custom tool kits.
LENGTH
BNC/TRB Cable Plug
Type
Length
RT1XL
straight
22.00"
RT1L
straight
12.00"
RTR-1L
right angle
12.00"
RTR-1XL
right angle
22.00"
RT1S
straight
6.00"
RT1SS
straight
3.75"
RTC-1L (insulated)
straight
12.00"
TPS, TCM, TRS, TTM, MBNC
Type
Length
RT4L
straight
12.00"
RT4S
straight
6.00"
RTC-4L (insulated)
straight
12.00"
BNC Coax Assembly Training Video
For additional information or for a free demonstration, contact
your local Sales Representative log on to our web site at
www.EmersonConnectivity.com and locate the rep nearest
you.
Bulk packaging for UPL220 Series BNC plugs ... Trompeter offers
Tool Crimp BNC's bulk packed in convenient vacuum-formed
plastic trays. Bulk packaging is perfect for OEM and high-volume,
on-site installations.
Includes:
(50) Body Assemblies
(51) Crimp Sleeves
(52) Center Contact Pins
Assembly Instructions
Example: UPL220-026/T50
BNC part number, Vacuum Tray part number
For cable groups see pages 78-120. (Not available for cable groups -017)
TOOLS & ACCESSORIES
Trompeter has produced a video which outlines the major
features of our BNC design, describes the tools for reliable
installation, and gives step-by-step assembly instructions.
The BNC Assembly Video CD is available at no cost to Trompeter
Customers.
BNC Bulk Packaging
APPENDIX
Appendix
Trompeter Cable Specifications
Trompeter cables are manufactured to the listed specifications
and offer optimum flexibility, shielding, and performance. Cables
with stranded center conductors have greater flexibility and are
recommended for short runs at low frequency where constant
cable movement might fatigue a single copper-weld center
conductor. Trompeter’s M17/176-00002 and TWAC-78-1F2 are
200°C, Hi-Temp Cables for MIL-STD-1553B data bus applications.
Dielectric and fillers made of PTFE (Teflon™) and outer jackets
are PFA (Perfluoroalkoxy). All dimensions are in inches. All
values without tolerances are nominal unless otherwise stated.
TWCH-78-2 has jacket constructed of flame retardant halogen free
polyolefin with temperature range of -30°C to +80°C.
Exploded Detail of Coax, Twinax, & Triax
Cable
CENTER
CONDUCTOR
JACKET
DIELECTRIC
Coax
BRAID
FILLER
OUTER SHIELD
INNER
CONDUCTORS
TWCP = Twinax Plenum Cable
TWCH = Twinax Blue Flame Retardant Halogen Free Polyolefin
Cable
TRCH = Triax Yellow Flame Retardant Halogen Free Polyolefin
Cable
Cable Designation
TCC-50-2
TCC-75-2
RG62 A/U
Impedance (Ohms)
50±2
75±3
93±5
Nominal outer dia.
0.195
0.242
0.242
PVC outer
Green
Violet
Black
Braid outer dia.
0.150 Max
0.191 Max
0.191 Max
Braid AWG#/Mat'l
36/Tinned Cu
34/Bare Cu
34/Bare Cu
Dielectric outer dia.
0.116
0.146
0.146
Dielectric mat'l
Solid PE
Foamed PE
PE
Conductor outer dia.
0.0355
0.031
0.0253
Conductor strands/Mat'l
19/.0071 Tinned
Cu
7/.010 Tinned
Cu
Solid/CCS
Operating temperature
range
-40°C to 90°C
-40°C to 85°C
-40°C to 80°C
Minimum bend radius
1.00
1.00
Max. Opr. VAC (RMS)
1.4 KV
800 V
750 V
Capacitance pf/ft (Max)
30.8
17.3
14.5
17.6
Atten. dB/100 ft:
1 MHz
0.380
0.335
0.250
10 MHz
1.400
1.070
0.900
50 MHz
3.40
2.40
1.90
100 MHz
4.90
3.40
2.80
200 MHz
7.30
4.85
3.70
9.00
5.20
12.00
8.50
400 MHz
1 GHz
28.80
3 GHz
Shielded Coverage
30.00
93%
For high temperature cables, see chart on the next page.
66
Twinax
CENTER
CONDUCTOR
Coax Cable Specs
Cond. Loop Res.
(Ohms/M ft.)
DIELECTRIC
93%
94.3% Min
DIELECTRIC
Triax
OUTER BRAID
JACKET
DIELECTRIC
INNER BRAID
JACKET
Appendix
67
Trompeter Cable Specifications
Twinax/Triax Cable Specs
Twinax
Triax
High Temperature:
Cable
Designation
TWC-78-1
TWC-78-2
M17/17600002
TWAC-781F2
TWC-1241A
TWC-124-2
TRC-50-1
TRC-50-2
TRC-75-1
TRC-75-2
Impedance
(Ohms)
78±3
78±3
77±7
77±7
124±4
124±4
50±2
50±2
75±5
75±5
Nominal outer
dia.
0.150
0.242
0.129
0.095
0.150
0.245
0.156
0.245
0.189
0.245
Outer braid
dia.
0.108
0.195 Max
0.102
0.070
0.105
0.195 Max
0.121
0.210 Max
0.150
0.205
Core outer dia.
0.085
0.154
0.084
0.052
0.085
0.162
Dielectric
outer dia.
0.043
0.076
0.042
0.026
0.043
0.080
0.047
0.116
0.073
0.116
Inner braid
outer dia.
0.069 Max
0.146 Max
0.093
0.146 Max
Inner jacket
outer dia.
0.101
0.175
0.130
0.175
Conductor
outer dia.
.022
0.0370
0.0230 Min.
0.0149
0.0120
0.0220
0.0150
0.0370
0.0120
.0185
Operating
temperature
Range
-40°C to
80°C
-40°C to
80°C
-55°C to
200°C
-55°C to
200°C
-40°C to
80°C
-40°C to
80°C
-40°C to
75°C
-40°C to
80°C
-40°C to
80°C
-40°C to
80°C
Minimum
bend radius
(in.)
1.50 Max
1.25
1.50
1.25
1.50
1.25
0.75
1.25
1.00
1.25
Max. Opr. VDC
0.6 KV Max
2.0 KV
0.6 KV
2.0 KV
2.0 KV
6.0 KV
2.0 KV
6.0 KV Max
Max. Opr. VAC
(RMS)
0.3 KV Max
1.0 KV
750 KV Max
250
0.3 KV
1.0 KV
1.0 KV
2.0 KV
1.0 KV
2.0 KV Max
Capacitance
pf/ft. (Max)
20.30 Max
(2)
21.20 (3)
24.00
23.00
12.40
12.30 (3)
29.50
32.00 (1)
20.00
20.50 (1)
Cond. loop
res.(Ohms/M
ft.)
179 Max
19.00 Max
48.00
146.00
570.60
56.80 Max
0.700
1.400
2.000
3.250
0.540
2.800
0.500
0.900
0.480
Atten. dB/100 ft.:
1 MHz
2.000
3 MHz
3.000
1.100
2.100
4.400
0.920
3.100
0.800
1.300
0.880
4 MHz
3.500
1.400
2.400
4.800
1.060
3.300
0.900
1.500
1.010
5 MHz
4.000
1.550
2.800
5.200
1.180
3.400
1.100
1.700
1.100
7 MHz
4.500
1.800
3.500
10 MHz
5.300
2.200
4.50 Max
20 MHz
7.50
3.10
6.500
5.600
1.400
3.700
1.300
1.900
1.300
5.900
1.650
4.100
1.500
2.400
1.500
8.30
2.30
5.50
2.30
3.60
2.30
30 MHz
9.20
3.90
10.20
2.80
7.00
2.90
4.50
2.90
40 MHz
10.60
4.50
11.80
3.20
7.50
3.40
5.40
3.30
50 MHz
11.90
5.10
13.20
3.60
9.10
3.90
6.10
3.60
100 MHz
16.80
7.50
18.70
5.10
14.00
5.80
9.70
5.20
200 MHz
23.70
10.50
26.40
7.20
22.00
8.80
16.50
7.60
500 MHz
37.50
16.00
41.70
11.40
40.00
15.30
28.50
10.80
44.30
18.60
49.40
13.50
50.00
18.00
36.00
14.70
53.00
22.50
59.00
16.20
63.00
23.00
45.00
17.60
Shielded
coverage
93%
93%
93.3%
90% Min.
93%
93%
93% Min.
93%
93% Min.
93%
Twist per ft.
8.00
4.00
11-14
16.00
8.00
4.00
APPENDIX
700 MHz
1 GHz
APPENDIX
Appendix
Twinax/Triax: Plenum/Halogen Free Cable Specs
Twinax
Triax
Cable Designation
TWCP-78-1
TWCP-78-2
TWCH-78-2
TWCP-124-2
TWCP-124-3
TWCP-124-5
TRCH-50-2
Description
Plenum
Plenum
Halogen Free
Plenum
Plenum
Plenum
Halogen Free
Impedance (Ohms)
78±3
78±3
78±3
124±4
124±4
124±5
50±2
Nominal outer dia.
0.150
0.242
0.242
0.245
0.205
0.325
0.245
Outer braid dia.
0.102
0.165
0.195
0.183
0.183
0.295
0.210
0.154
0.163
.076
0.080
0.062
0.134
0.116
Core outer dia.
Dielectric outer dia.
0.041
0.072
Inner braid outer dia.
0.043
Inner jacket outer dia.
0.146
0.175
Conductor outer dia.
0.021
0.037
0.037
0.024
0.024
0.048
0.037
Operating temperature
range
+125°C
+125°C
-30°C to +80°C
+125°C
-10°C to +75°C
-10°C to +125°C
-30°C to +80°C
Minimum bend radius
(in/ft.)
1.50
2.50
1.25
2.5
2.0
3.25
1.25
Max. Opr. VDC
2KV
2500
2500
6 KV
Max. Opr. VAC (RMS)
1KV
1KV
1800
1800
2 KV
Capacitance pf/ft. (Max)
19.6 (3)
18.6(3)
Cond. loop res.
(Ohms/M ft.)
21.2(3)
11.5
12.0(3)
11.0(3)
19.0
47.0
28.4
6.5(3)
10.5
Atten. dB/100 ft.:
1 MHz
2.00
.60
0.70
.50
0.60
.30
0.50
3 MHz
3.00
1.00
1.10
.85
0.90
.47
0.80
4 MHz
3.50
1.20
1.40
1.10
.64
0.90
5 MHz
4.00
1.40
1.55
1.10
1.20
.69
1.10
7 MHz
4.50
1.60
1.80
1.30
1.40
.79
1.30
10 MHz
5.30
2.00
2.20
1.60
1.60
.94
1.50
20 MHz
7.50
2.80
3.10
2.30
2.20
1.20
2.30
30 MHz
9.20
3.50
3.90
2.80
1.50
2.90
40 MHz
10.60
4.10
4.50
3.20
1.70
3.40
50 MHz
11.90
4.60
5.10
3.70
3.60
2.00
3.90
100 MHz
16.80
6.90
7.50
5.30
5.20
3.00
5.80
200 MHz
23.70
9.90
10.50
7.20
4.50
8.80
500 MHz
37.50
15.40
16.00
11.40
7.00
15.30
700 MHz
44.30
18.30
18.60
13.50
8.40
18.00
1 GHz
53.00
21.80
22.50
16.20
11.00
23.00
Shielded coverage
97%
95%
93%
93%
93%
93%
93%
Twist per ft.
8.0
4.0
4.0
4.0
6.0
6.0
Notes:
(1) = Center Conductor to Inner Braid
(2) = Conductor to Shield
(3) = Conductor to Conductor
68
Appendix
69
Connector Compatibility Tables
Twinax/Triax Wrench/Tool Crimp Connectors
Select your connector and read across to find available cable group numbers.
Twinax/Triax Wrench Crimp Connectors
Wrench Crimp Cable Groups
Connector
7
7A 8
9
10 11 12 13 13A 14 14A 15 16 17 23 24 24A 25 25A 26 27 28 29 30 32 33 35 38 39 40 42 43 45 46 47 49 54 55 56 57 58 59 60 61 62 64
BJ39
BJ74(FL/TL)
BJ79(FL/TL)
BJ89/BJ89F
BJ154(FL)
BJ159(FL)
BJ374
BJ379
BJ389(F)
N
BJ893(F)
N
BJ3154
BJ3159
CJ70(FL/TL)
Y
CJ80
N
CJ150(FL)
Y
CJ370
N
CJ380
N
CJ803
CJ3150
J72S
J72SM
J150
PL30
PL71
PL71L
Y
PL73
Y
PL74
Y
PL75(FL)
PL80
PL101
PL153
PL155
PL155FL
Y
PL375
N
PL380
N
PL803
PL3155
APPENDIX
APPENDIX
Appendix
Connector Compatibility Tables
Twinax/Triax Wrench/Tool Crimp Connectors
Select your connector and read across to find available cable group numbers.
Twinax/Triax Wrench Crimp Connectors
Wrench Crimp Cable Groups
Connector
BJ154AC
BJ154ACFL
BJ159AC
BJ159ACFL
CJ150AC(FL)
BJ3154AC
BJ3159AC
CJ3150AC
CJ70C(TL)(FL)
CJ370C
BJ74C(TL)(FL)
BJ374C
BJ79C(TL)(FL)
BJ379C
PL73C
PL74C
PL75C
PL75CFL
PL153AC
PL155AC
PL155ACFL
PL375C
PLR375C
PL3155AC
PLR74C
PLR75CFL
PLR75C
PLR155AC(FL)
PLR3155AC(FL)
SPC8P
SPC8S
BJ459AC/GROUP
CJ450AC/GROUP
PL455AC/GROUP
PLR455AC/GROUP
70
201 202 203 204 205 206 207 208 209 210 211 212 213 214 215 216 217 218 219 220 221 222 223 224 225 301 302 303 305 306 307 308 309
Appendix
71
Trompeter General Material/Finish Specifications
TFS-1: Finish Specifications
TFS-1A
.0001- .0003 max thk Bright Nickel per QQ-N-290, Class1, Form SB (over)
.000080-.000150 thk Bright Copper per MIL-C-14550 (over) .0005 max
Electroless Nickel per AMS-2404C, Class 1 (On Aluminum Only)
TFS-1B
.000020 - .000030 thk Bright Gold2 per MIL-G-45204, Type II, Grade C,
Class3 (over)
.000050-.000180 thk Bright Nickel3 per QQ-N-290, Class1 (over)
.000080-.000150 thk Bright Copper3 per MIL-C-14550
TFS-1D
.0001min - .000120 max thk Electroless Nickel per AMS 2404C (over)
.000080 min - .000150 max thk Bright Copper per MIL-C-14550
TFS-1E
.0002 min -.0003 max thk Bright Electro Tin per MIL-T-10727, Type 1 and
solder test per Para. 4.6.3.1
TFS-1M4
.000200 min - .000300 max thk Silver per QQ-S-365, Type II (Semi-bright)
Grade A (Chromate post treatment)
(over) .000080 min - .000150 max thk Bright Copper
per MIL-C-14550
TFS-1T5
.000050 -.000100 Bright Tin per MIL-T-10727, Type I (Electro Deposited)
(over) .000150-.00020 Sulfamate Nickel per MIL-P-27418
(over) .00010-.00150 Copper per MIL-C-14550, Class 4
TFS-1U5
.00020-.00030 thk Sulfamate Nickel per MIL-P-27418
(over) .000080-.000150 max thk Copper
per MIL-C-14550
Trompeter Finish Specification -1
(TFS-1) Notes:
(2) Bright Gold plate on all connector center contacts, pins, sockets, shall be .000050 min - .000070 max thk, Class 1
(3) Thickness is in accordance with MIL-G-45204B, Para 6.3 "Strikes and Underplating"
(4) Copper Alloy articles on which a nickel undercoat is not used shall not be used for continuous service at temperatures above 149°C
(300°F) QQ-S-365, Para. 3.3.5.
(5) For use on Brass and Beryllium Copper body (shell) and accessory components when 500 hour salt spray test is specified. (For test
conditions, refer to MIL-C-38999, Para. 3.16 and 4.7.12.2, [Method 1001.1 of MIL-STD-1344])
(6) Plating thickness variations, critical and noncritical areas must be plated to within specified lower limits, except where
surfaces cannot be contacted by A .75 inch dia ball, noncritical areas total plating thickness may exceed the specified upper limits
by .000150 maximum.
Materials
Alloy or Type
FED/MIL Spec.
Usage
ABS
Moldings Type 2
MIL-STD-1803
L-P-1883B
Looping plug handles, lock pins
Acetal
Dupont Delrin
L-P-392
Insulators, cases, bushings
Aluminum
2024-T351
QQ-A255/6
Backbars, cases
6061-T6
QQ-A200/8
Stiffener bars
6061-T6
QQ-A250/11
Patch panels
6061-T6511
QQ-A200/8
Backbars, cases
17200 (Bar)
ASTM-B-194
Contact & crescent springs
17300 (Flat)
ASTM-B-196 &197
Contact sockets, fingersprings, washers
C26000
ASTM-B-36
Ground lugs, washers
C36000
ASTM-B-16
Connector bodies, coupling sleeves, clamp
nuts, hex mtg. nuts, ctr. contact pins, cases
Beryllium Copper
Brass
TFS-1V3
.000200-.000300 max thk Silver per QQ-S-365, Type I (Matte), Grade A (over)
.000050-.000180 max thk Sulfamate Nickel per MIL-P-27418, (over)
.000080 min-.000150 max thk Bright Copper
per MIL-C-14550
Dupont Acetal Resin #500TL
Homopolymer General Purpose w/
1.5% Teflon Micropower
Fluorinated Ethylene
Propylene
(FEP)
Hyflon
MFA Grade 640
Loctite
495 (Zinc Iridite per ASTM-B633)
Moldings
ASTM-D-2116
Insulators
Alternate material dielectric
QQ-2-325 Type 2 Class 2 Finish
Nylon
6/6 or 6/12
L-P-410A
Insulating bushings
Perfluoroalkoxy
(PFA)
ASTM-D-3307
Cable jackets
Phenolic
XXX
L-P-513 PBE
Patch panels, backbars
Phosphor Bronze
Alloy 544
ASTM-B-139
Contact springs, lockwashers
Polytetrafluoroethylene
(PTFE)
ASTM-D-1710
Dielectrics, insulators
MIL-I-23053/8
Sealing Sleeves
Gaskets, O-rings, sealing members
Polyvinylidene Flouride
Rubber
Silicone
ZZ-R-765
Solder
Sn60, 62, 63, or 96
QQ-S-571
Steel
C1010-1018
QQ-S-636
MPN cases
Music Wire
ASTM-A228 SAE J178
Tension springs
Steel CRS
Type 17-4PH
AMS-5643 Tubing
Corrosion Resistant Steel
303
QQ-S-763
Connector bodies, coupling sleeves, hex
mtg. nuts
Designation strips
302
QQ-S-766
301
ASTM-484, A582
Thermo-plastic Polyester
Glass Filled
MIL-M-24519
Heat resistant molded insulators
Vinyl
Clear Rigid-Self ext.
ASTM-D-635
Designation strip window
Opaque Rigid-Self ext.
ASTM-D-635
Designation strip marking strip
Alloy #3
ASTM-B-240/B-86
Selected non-functional parts
Zinc
TFS = Trompeter Finish Specifications
Connectors
Frequency Range
VSWR
Voltage Rating
TNC
70 Series
150 Series
450 Series
WE Standard
WE Miniature
RCA Standard
0-4 GHz
0-11 GHz
0-500 MHz
0-500 MHz
0-2 MHz
0-1 GHz
0-1 GHz
0-200 MHz
1.04 @ 75 MHz
1.06 Max.
1.05 @ 50 MHz
1.12 @ 100 MHz
-
1.09 @ 100 MHz
1.18 @ 500 MHz
-
1.33 @ 500 MHz
250 VRMS @ Sea Level
500 VRMS @ Sea Level
1.30 Max.
Not Rated
500 VRMS@ Sea Level
500 VRMS @ Sea Level
400 VRMS @ Sea Level
250 VRMS @ Sea Level
150 VRMS @ Sea Level
500 VRMS @ Sea Level
125 VRMS @ 70,000 ft.
125 VRMS @ 70,000 ft.
100 VRMS @
70,000 ft.
62.5 VRMS @
70,000 ft.
Not Rated
Not Rated
-65°C to 200°C
-65°C to 165°C
-65°C to165°C
-65°C to 165°C
APPENDIX
Temperature Range
Patching
BNC
APPENDIX
Appendix
BNC Tool/Wrench Crimp Assembly Illustrations
BNC Coax Tool Crimp Assembly Illustration
1.132
.632
CONTACT PIN
Step 1
1. Place crimp sleeve onto cable with the step located away from
the cut end as shown.
CRIMP SLEEVE
FILLER SLEEVE & BUSHING
.593 DIA MAX
(USED ONLY ON CONNECTORS
-001 THRU -007 & -027)
CRIMP
SLEEVE
2. Strip cable as shown and flare braid.
.250
.344
.156
3. On connectors with cable group number -001 thru -007, and
-027 only, slide filler sleeve fully under braid, then bushing under
cable dielectric.
CABLE STRIPPING
4. Crimp contact pin in position shown.
FLARE
PIN CONTACT
Step 2
1. Push cable assembly into the body until the contact pin snaps
into place.
CRIMP SLEEVE
FILLER SLEEVE
(SEE STEP 1, LINE 3)
2. Slide crimp sleeve forward over braid, up against the body
assembly and crimp in place.
BODY ASSY
BNC Coax Wrench Crimp Assembly Illustration
Step 1
1. Place clamp nut onto cable.
.312
3. Lightly tin center conductor (optional).
Step 2
1. Push edge of cone between cable dielectric and braid (or
between foil and braid, if foil is present, and cone I.D. will accept
it). Continue to push cable into cone until cable dielectric bottoms
against cone dielectric. Center conductor should be visible in pin
inspection hole.
PIN/CONE
ASSY
BODY ASSY
2. Strip cable as shown and flare braid to allow free entry of cone
(Lateral slits 180° apart may be required for very inflexible jacket
materials).
.158
CABLE STRIPPING
1
CENTER
CONDUCTOR
CABLE DIELECTRIC
FLARE
PIN/CONE ASSY
2. Solder center conductor into pin.
Step 3
SOLDER
1. Bring clamp nut up onto tapered portion of cable.
2. Assemble body and engage with clamp nut.
3. Wrench tighten to 25-30 inch-pounds torque.
Notes: For Illustration purposes only. Not intended to replace actual installation instructions.
72
CLAMP NUT
BODY ASSY
Appendix
73
Cable Group Table Notes
If your cable group is not listed, contact customer service for assistance.
Trompeter provides cable connectors with configurations
designed to provide tough, durable terminations on specific
cables. Cable connector part numbers reference a specific
cable group number for a specific cable type, model, and/or
manufacturer. This ensures that the connector fits your cable and
provides the toughest termination available in the industry.
If you know the part number and manufacturer of your cable, you
can locate the cable's assigned cable group number using the
cable group table in the following pages.
If you have a Trompeter connector, you can determine the cable
group number by the last hyphenated suffix, (usually 1 to 3 digits).
Example: UPL220-026 = cable group number -026
Note: All dimensions in the proceeding Cable Group Table are in thousandths of
an inch.
If you cannot satisfy your connector requirements with the
standard cable group number, or have a special requirement,
contact your local Trompeter representative listed on the back
inside cover of this catalog, or you can visit our website at www.
EmersonConnectivity.com to find the sales rep nearest you.
Contact customer service for more information.
Note: Cables of the same type and specification may vary from
manufacturer to manufacturer. Always verify the cable group
number for your connector type and manufacturer.
The symbol after the part numbers listed in this catalog
indicates that you should refer to the cable group table in the
proceeding pages.
Wrench style = Wrench Crimp
Crimp style = Tool Crimp
APPENDIX
For a complete listing please refer to the online catalog.
APPENDIX
74
Cable Group Table
CABLE MANUFACTURER
CABLE NUMBER
CABLE TYPE
WRENCH STYLE
CRIMP STYLE
JACKET SIZE
CONDUCTOR
IMPEDANCE
ALCATEL
0960 WL
COAX
_
-004
0.093
0.011
75
ALCATEL
ASNE 0690 WL
COAX
_
-004
0.093
0.011
75
ALCATEL
CDE 003
TWINAX
*
-204
0.140
0.024
77
ALPHA
8620
COAX
-41
-020
0.270
0.041
75
ALPHA
9059
COAX
-2
-013
0.242
0.026
75
ALPHA
9102
COAX
*
-023
0.212
0.032
75
ALPHA
9108
TWINAX
-55
*
0.210
0.038
78
ALPHA
9109
TWINAX
_
-213
0.252
0.037
100
ALPHA
9158
COAX
-21
*
0.165
0.035
53
ALPHA
9174
COAX
-5
-003
0.100
0.021
50
ALPHA
9316
COAX
-5
-003
0.098
0.021
50
ALPHA
9807
COAX
-51
-016
0.304
0.032
75
ALPHA
9817
TWINAX
-8
_
0.327
0.038
100
ALPHA
9830
COAX
-2
-013
0.242
0.025
75
ALPHA
9840
COAX
-2
-013
0.240
0.025
80
ALPHA
9847
COAX
_
-053
0.405
0.064
75
ALPHA
9850
TRIAX
-13
TOO LARGE
0.314
0.032
75
ALPHA
9858
COAX
-1
-011
0.193
0.036
50
ALPHA
2834/2
TWINAX
-45
_
0.137
0.032
600V
ALPHA
9058C
COAX
-1
-011
0.194
0.038
50
ALPHA
9179B
COAX
-5
-004
0.101
0.012
75
ALPHA
9180B
COAX
-4
*
0.140
0.038
95
ALPHA
9187A
COAX
-36
-004
0.105
0.010
75
ALPHA
9196A
COAX
-44
-1
0.070
0.011
50
ALPHA
9804C
COAX
-41
-020
0.275
0.040
75
ALPHA
9814C
TWINAX
*
-213
0.244
0.038
75
ALPHA
9818C
TWINAX
-8
_
0.330
0.037
100
ALPHA
9825C
COAX
-6A
_
0.400
0.064
75
ALPHA
9861C
COAX
-1
-011
0.192
0.038
_
ALPHA
9871F
COAX
*
-011
0.182
0.037
50
ALPHA WIRE
2821/2
TWINAX
-27
_
0.138
0.024
600V
AMPHENOL
82-5588
TWINAX
-8
_
0.330
00.39
_
AMPHENOL CNDA
21-1060
COAX
-6
-016
_
_
_
AT&T (LUCENT)
733
COAX
_
-027
_
_
75
AT&T (LUCENT)
1735A
COAX
_
-026
0.128
0.016
75
AT&T (LUCENT)
2735A
COAX
-22
-026
0.140
0.015
75
AT&T (LUCENT)
734D
COAX
-63
-025
0.236
0.031
75
AT&T (LUCENT)
735A
COAX
*
-026
0.125
0.016
75
AT&T (LUCENT)
NSI 4609 805 13019
COAX
-37
*
0.166
0.016
_
AT&T (LUCENT)
724
COAX
-6
-016
0.304
0.033
_
AT&T (LUCENT)
728
COAX
-6
-016
0.304
0.033
75
AT&T (LUCENT)
731
COAX
-2
-015
0.248
0.023
75
AT&T (LUCENT)
730A
COAX
-2B
-015
0.255
0.025
AT&T (LUCENT)
734A
COAX
-63
-025
0.236
0.031
75
AT&T (LUCENT)
KS-19224L2
COAX
-31
*
0.116
0.011
_
AT&T (W.E.CO)
16PEVL
TWINAX
-12
_
0.460
0.051
_
AT&T (W.E.CO)
754E
TWINAX
-10
_
0.420
0.040
_
AT&T (W.E.CO)
760A
TWINAX
-11
TOO LARGE
0.308
0.025
_
AT&T (W.E.CO)
761A
TWINAX
-30
0.215
0.021
_
BELDEN
8208
TWINAX
-25
_
0.257
0.047
300V
BELDEN
8212
COAX
-2
-014
0.242
0.032
75
BELDEN
8213
COAX
-6A
-053
0.405
0.064
75
BELDEN
8215
COAX
-6E
-017
0.332
0.028
75
BELDEN
8216
COAX
-5
-003
0.103
0.020
50
Note: * = Special contact customer service
For a complete listing please refer to the online catalog.
Cable Group Table
CABLE NUMBER
CABLE TYPE
WRENCH STYLE
CRIMP STYLE
JACKET SIZE
CONDUCTOR
IMPEDANCE
BELDEN
8218
COAX
-22
-009
0.150
0.017
75
BELDEN
8219
COAX
-1
-011
0.195
0.037
52
BELDEN
8221
COAX
-2
-013
0.242
0.025
80
BELDEN
8227
TWINAX
-8
_
0.330
0.039
_
BELDEN
8232
TRIAX
-13A
TOO LARGE
0.312
0.032
75
BELDEN
8233
TRIAX
-14
_
0.475
0.064
75
BELDEN
8237
COAX
-6A
_
0.405
0.085
50
BELDEN
8238
COAX
-6A
_
0.405
0.048
75
BELDEN
8240
COAX
-1
-021
0.195
0.032
51.5
BELDEN
8241
COAX
-2
-013
0.242
0.025
75
BELDEN
8259
COAX
-1
-011
0.195
0.040
50
BELDEN
8261
COAX
-6A
_
0.405
0.049
75
BELDEN
8262
COAX
-1
-011
0.192
0.038
50
BELDEN
8263
COAX
-2
-013
0.242
0.023
75
BELDEN
8267
COAX
-6A
_
0.405
0.086
50
BELDEN
8268
COAX
-6B
TOO LARGE
0.425
0.089
50
BELDEN
8279
COAX
-2A
-022
0.220
0.025
75
BELDEN
8281
COAX
-6
-016
0.307
0.030
75
BELDEN
8422
TWINAX
-9
_
0.231
0.025
1000V
BELDEN
8441
TWP
30
_
0.210
0.025
300V
BELDEN
8450
TWINAX
-27
_
0.121
0.025
200V
BELDEN
8451
TWINAX
-23
-210
0.140
0.031
300V
BELDEN
9011
COAX
-6A
-053
0.405
0.064
75
BELDEN
9054
COAX
-2
-014
0.242
0.032
75
BELDEN
9060
COAX
-41
*
0.284
0.040
75
BELDEN
9064
COAX
-6A
_
0.400
0.064
75
BELDEN
9066
COAX
-41
-020
0.275
0.041
75
BELDEN
9068
COAX
-22
-009
0.146
0.016
75
BELDEN
9100
COAX
-2
-014
0.237
0.032
75
BELDEN
9104
COAX
-2A
*
0.243
0.032
75
BELDEN
9108
COAX
*
-014
0.237
0.032
75
BELDEN
9110
COAX
-2
-014
0.242
0.032
75
BELDEN
9112
COAX
-2
0.242
0.032
_
BELDEN
9114
COAX
-41
-020
0.270
0.040
75
BELDEN
9116
COAX
-41
-020
0.278
0.038
75
BELDEN
9141
COAX
-6
-016
0.304
0.033
75
BELDEN
9146
COAX
4
_
_
_
_
BELDEN
9165
COAX
-2
-013A
0.242
0.030
75
BELDEN
9167
COAX
-2
-014
0.243
0.032
75
BELDEN
9168
COAX
-41
-020
0.275
0.040
75
BELDEN
9169
COAX
-2B
-015
0.249
0.025
93
BELDEN
9170
COAX
-4
*
0.140
0.022
75
BELDEN
9171
COAX
-2
-013A
0.242
0.030
75
BELDEN
9201
COAX
-1
-021
0.193
0.033
52
BELDEN
9203
COAX
-1
-021
0.195
0.035
50
BELDEN
9204
COAX
_
-013
0.241
0.025
75
BELDEN
9207
TWINAX
-8
_
0.330
0.039
100
BELDEN
9209
COAX
-63
-019
0.226
0.022
75
BELDEN
9212
COAX
-6A
_
0.405
0.048
75
BELDEN
9221
COAX
-5
-004
0.102
0.012
75
BELDEN
9222
TRIAX
-7
-306
0.239
0.040
50
BELDEN
9223
COAX
-1
*
0.195
0.030
50
BELDEN
9228
COAX
-2
-013
0.242
0.025
93
BELDEN
9231
COAX
-6
-016
0.304
0.032
75
Note: * = Special contact customer service
For a complete listing please refer to the online catalog.
APPENDIX
CABLE MANUFACTURER
75
APPENDIX
76
Cable Group Table
CABLE MANUFACTURER
CABLE NUMBER
CABLE TYPE
WRENCH STYLE
CRIMP STYLE
JACKET SIZE
CONDUCTOR
IMPEDANCE
BELDEN
9239
COAX
-5
-003
0.104
0.019
50
BELDEN
9240
COAX
-2
-014
0.241
0.032
75
BELDEN
9243
COAX
-2
-014
0.242
0.032
_
BELDEN
9244
COAX
-2
-013
0.242
0.025
73
BELDEN
9248
COAX
-41
-020
0.270
0.036
75
BELDEN
9250
TWINAX
-10
_
0.420
0.046
95
BELDEN
9251
COAX
-6A
_
0.405
0.085
52
BELDEN
9252
COAX
*
-010
0.160
0.030
50
BELDEN
9254
COAX
-22
-009
0.142
0.019
75
BELDEN
9259
COAX
-2A
-023
0.234
0.030
75
BELDEN
9265
COAX
-2
-014
0.242
0.031
75
BELDEN
9266
COAX
-2
-013A
0.245
0.031
_
BELDEN
9268
COAX
*
-018
0.260
0.025
93
BELDEN
9272
TWINAX
-9
-213
0.242
0.037
78
BELDEN
9273
COAX
-3
-012
0.216
0.035
50
BELDEN
9274
COAX
-2
-014
0.242
0.032
75
BELDEN
9275
COAX
-2
-14
0.242
0.032
75
BELDEN
9284
COAX
-41
-020
0.275
0.040
_
BELDEN
9291
COAX
-2
-013
0.242
0.025
80
BELDEN
9292
COAX
-6A
-053
0.405
0.064
75
BELDEN
9310
COAX
*
-011
0.194
0.035
50
BELDEN
9311
COAX
-1
-011
0.193
0.037
52
BELDEN
9386
COAX
-41
-020
0.275
0.040
_
BELDEN
9448
COAX
-2
-013
0.242
0.025
_
BELDEN
9463
TWINAX
-9
-213
0.240
0.037
78
BELDEN
9555
COAX
-2
-013
0.242
0.023
75
BELDEN
9587
COAX
-41
-020
0.275
0.040
75
BELDEN
9589
COAX
-2
_
0.242
0.032
_
BELDEN
9659
COAX
-2
-013A
0.242
0.030
75
BELDEN
9764
COAX
-6A
_
0.405
0.064
75
BELDEN
9815
TWINAX
-8
_
0.330
0.037
100
BELDEN
9841
TWINAX
-9
-215
0.256
0.025
120
BELDEN
9850
COAX
-6B
_
0.425
0.048
75
BELDEN
9857
COAX
-6A
_
0.405
0.025
125
BELDEN
9859
TWINAX
*
-213
0.243
0.038
78
BELDEN
9860
TWINAX
-46
_
0.440
0.051
124
BELDEN
9861
COAX
-6E
_
0.332
0.057
50
BELDEN
9880
COAX
-48
_
0.405
0.086
50
BELDEN
9907
COAX
-1
-011
0.185
0.037
50
BELDEN
46899
COAX
-1
*
0.199
0.024
75
BELDEN
81553
TWINAX
-47
-201
0.129
0.024
77
BELDEN
82120
COAX
-34
-024
0.244
0.040
75
BELDEN
82121
COAX
-52
-024
0.240
0.040
75
BELDEN
82907
COAX
-21
*
0.163
0.036
50
BELDEN
83241
COAX
*
-011
0.187
0.037
50
BELDEN
83242
COAX
-1
-012
0.193
0.039
50
BELDEN
83264
COAX
-5
-004
0.100
0.012
75
BELDEN
83265
COAX
-5A
-001
0.071
0.010
50
BELDEN
83266
COAX
-22
-008
0.141
0.012
95
BELDEN
83267
COAX
-36
-004
0.110
0.012
75
BELDEN
83269
COAX
-5
-003
0.100
0.018
50
BELDEN
83284
COAX
-5
-003
0.100
0.021
50
BELDEN
83303
COAX
-44
_
0.075
0.019
600V
BELDEN
83310
TWINAX
-29
-207
0.120
0.031
Note: * = Special contact customer service
For a complete listing please refer to the online catalog.
Cable Group Tables
CABLE NUMBER
CABLE TYPE
WRENCH STYLE
CRIMP STYLE
JACKET SIZE
CONDUCTOR
IMPEDANCE
BELDEN
83317
TWINAX
*
-223
0.112
0.019
600V
BELDEN
83318
TWINAX
-29
-204
0.132
0.025
600V
BELDEN
83319
TWINAX
*
-221
0.139
0.032
NC
BELDEN
84142
COAX
-1
-021
0.195
0.037
50
BELDEN
84303
COAX
-21
-011
0.170
0.037
50
BELDEN
86262
COAX
-2A
-022
0.220
0.025
93
BELDEN
87108
COAX
-2A
-023
_
_
_
BELDEN
87120
COAX
-52
-024
0.256
0.040
75
BELDEN
88281
COAX
-41
*
0.270
0.031
75
BELDEN
89108
COAX
-2A
-023
0.218
0.032
75
BELDEN
89120
COAX
-52
*
0.235
0.041
75
BELDEN
89162
COAX
-2A
-019
_
_
75
BELDEN
89182
TWINAX
-54
0.307
0.031
150
BELDEN
89248
COAX
-52
*
0.222
0.040
75
BELDEN
89269
COAX
-2A
-022
0.222
0.025
93
BELDEN
89272
TWINAX
-55
*
0.220
0.039
78
BELDEN
89292
COAX
*
-052
0.348
0.064
75
BELDEN
89555
COAX
-53
-019
0.230
0.023
75
BELDEN
89880
COAX
-50
_
0.375
0.086
50
BELDEN
89907
COAX
-21 (20/90)
*
0.160
0.037
50
BELDEN
513945
COAX
_
-052
0.405
0.064
75
BELDEN
533945
COAX
-41
-020
0.266
0.041
75
BELDEN
549945
COAX
_
-023
0.232
0.032
75
BELDEN
551945
COAX
_
-023
0.232
0.030
75
BELDEN
568937
COAX
-36
-027
0.123
0.016
75
BELDEN
573945
COAX
-22
-009
0.146
0.018
75
BELDEN
613948
COAX
_
-025
0.348
0.064
75
BELDEN
1151A
COAX
-2
-013A
0.247
0.032
75
BELDEN
1152A
COAX
-41
*
0.280
0.040
75
BELDEN
1162A
TWINAX
-8
_
0.330
0.037
100
BELDEN
1163A
COAX
-6
-016
_
_
100
BELDEN
1164B
COAX
-22
-009
0.145
0.019
75
BELDEN
1167A
COAX
-22
-009
0.152
0.020
75
BELDEN
1167B
COAX
-22
-009
0.146
0.019
75
BELDEN
1168A
COAX
-141
0.141
0.037
_
BELDEN
1223A
COAX
-41
-020
0.275
0.040
75
BELDEN
1263A
COAX
*
-009
0.160
0.021
75
BELDEN
1406B
COAX
-22
-009
0.146
0.019
75
BELDEN
1407B
COAX
-22
-009
0.146
0.019
75
BELDEN
1417B
COAX
_
-009
0.150
0.018
75
BELDEN
1418B
COAX
-22
-009
0.150
0.015
75
BELDEN
1426A
COAX
-2
-014
0.242
0.032
75
BELDEN
1505A
COAX
-2
-025
0.234
0.032
75
BELDEN
1505F
COAX
-2
_
0.242
0.034
75
BELDEN
1520A
COAX
-5
-004
0.102
0.012
75
BELDEN
1521A
COAX
_
-004
0.560
0.012
75
BELDEN
1522A
COAX
-36
-004
0.107
0.012
75
BELDEN
1523A
COAX
-6A
-053
0.400
0.064
75
BELDEN
1525A
COAX
-6A
TOO LARGE
0.404
0.064
75
BELDEN
1530A
COAX
-41
-020
0.270
0.040
75
BELDEN
1547A
COAX
-41
-020
0.275
0.040
75
BELDEN
1617A
COAX
-6B
TOO LARGE
0.407
0.064
75
BELDEN
1671A
COAX
-86
-003
0.087
0.020
50
BELDEN
1671J
COAX
-31
_
0.127
0.020
50
Note: * = Special contact customer service
For a complete listing please refer to the online catalog.
APPENDIX
CABLE MANUFACTURER
77
APPENDIX
78
Cable Group Table
CABLE MANUFACTURER
CABLE NUMBER
CABLE TYPE
WRENCH STYLE
CRIMP STYLE
JACKET SIZE
CONDUCTOR
IMPEDANCE
BELDEN
1672A
COAX
-86
-004
0.087
0.011
75
BELDEN
1672J
COAX
-31
-027
0.127
0.011
75
BELDEN
1694A
COAX
-41
-020
0.282
0.040
75
BELDEN
1696A
TWINAX
*
-215
0.240
0.031
110
BELDEN
1800A
TWINAX
*
-212
0.184
0.024
110
BELDEN
1800B
TWINAX
*
-212
0.180
0.024
110
BELDEN
1800F
TWINAX
-30
_
0.216
0.024
110
BELDEN
1807A
COAX
-5
-004
0.110
0.012
75
BELDEN
1808A
COAX
-5
-004
0.110
0.012
75
BELDEN
1809A
COAX
-63
-025
0.234
0.032
75
BELDEN
1829A
COAX
-41
-020
0.270
0.040
75
BELDEN
1865A
COAX
-22
-09
0.152
0.020
75
BELDEN
1880A
TWINAX
*
-212
0.184
0.024
_
BELDEN
3092A
COAX
-51
*
0.298
0.040
75
BELDEN
4-27046-3265
TWINAX
*
_
0.200
0.023
_
BELDEN
5339b5
COAX
_
-020
0.266
0.040
75
BELDEN
5339Q5
COAX
_
-016
0.298
0.040
75
BELDEN
5399B5
COAX
_
-020
0.270
0.040
75
BELDEN
5539Y5
COAX
_
-022
0.232
0.025
93
BELDEN
6139B8
COAX
_
-052
0.348
0.064
75
BELDEN
6339Q8
COAX
_
-024
0.248
0.040
75
BELDEN
6439Q8
COAX
_
-023
0.230
0.032
75
BELDEN
734D()
COAX
_
-025
_
_
75
BELDEN
734D()T
COAX
_
-025
_
_
75
BELDEN
734D1
COAX
_
-025
0.235
0.032
75
BELDEN
735A()
COAX
*
-026
_
_
75
BELDEN
735A()T
COAX
*
-026
_
_
75
BELDEN
735A1
COAX
*
-026
0.129
0.016
75
BELDEN
7700A
COAX
-5
-004
0.107
0.012
75
BELDEN
7710A
COAX
-41
-020
0.275
0.040
75
BELDEN
7713A
COAX
-41
-020
0.275
0.040
75
BELDEN
7731A
COAX
-6A
-053
0.405
0.064
75
BELDEN
7788A
COAX
-4
-009
0.159
0.023
75
BELDEN
7794A
COAX
-023
0.235
0.032
75
BELDEN
7805A
COAX
-5
-003
0.105
0.018
50
BELDEN
7806A
COAX
-1
-011
0.195
0.037
50
BELDEN
7807A
COAX
-1
_
0.195
0.044
50
BELDEN
8232A
TRIAX
-13A
TOO LARGE
0.315
0.032
75
BELDEN
8233A
TRIAX
-14
_
0.475
0.048
75
BELDEN
8241A
COAX
-2
-013
0.242
0.025
75
BELDEN
8241B
COAX
-2
-013
0.242
0.023
75
BELDEN
8241F
COAX
-2
-013A
0.242
0.030
75
BELDEN
8281B
COAX
-6
-016
0.307
0.030
75
BELDEN
8281F
COAX
-51
-016
0.300
0.033
75
BELDEN
9062A
COAX
-2
-013
0.242
0.025
93
BELDEN
9269_
COAX
-2
-013
0.242
0.025
93
BELDEN
97300 2802
TWINAX
*
-050
0.94
0.012
_
BELDEN
9913F
COAX
*
-050
0.408
0.108
50
BELDEN
M9100
COAX
-2
-014
0.240
0.032
_
BELDEN
M9815
TWINAX
-8
_
_
_
_
BELDEN
PD7163
COAX
-004
0.100
0.010
75
BELDEN
SS895
COAX
-36
-027
0.123
0.016
75
BELDEN
YM23969
COAX
-34
*
0.244
0.033
_
BELDEN
YQ10474
TWINAX
-25
_
0.268
0.032
_
Note: * = Special contact customer service
For a complete listing please refer to the online catalog.
Cable Group Table
CABLE NUMBER
CABLE TYPE
WRENCH STYLE
CRIMP STYLE
JACKET SIZE
CONDUCTOR
IMPEDANCE
BELDEN
YQ28763
TWINAX
-55
_
0.200
_
_
BELDEN
YQ40343
COAX
-5
-004
0.95
0.012
75
BELDEN
YQ41416
TRIAX
-10
TOO LARGE
0.410
0.063
75
BELDEN
YQ44343
COAX
_
-009
0.142
0.019
75
BELDEN
YR-14910
TWINAX
-29
-202
0.150
0.024
78
BELDEN
YR-15161
TWINAX
-29
_
_
_
_
BELDEN
YR16411
TWINAX
-9
_
0.247
0.023
_
BELDEN
YR-19218
TWINAX
-29
-203
0.150
0.012
124
BELDEN
YR23023
COAX
*
-009
0.160
0.020
75
BELDEN
YR23930
COAX
-2
-014
0.242
0.032
75
BELDEN
YR27110
COAX
-22
-009
0.162
0.021
75
BELDEN
YR27543
TWINAX
-27
*
0.117
0.012
_
BELDEN
YR28296
TWINAX
_
-203
0.162
0.012
_
BELDEN
YR28314
COAX
*
-009
0.162
0.019
75
BELDEN
YR28365
COAX
-2
-013
0.245
0.025
100
BELDEN
YR39667
COAX
-22
-009
0.152
0.020
75
BELDEN
YR40974
COAX
-36
-007
0.113
0.012
75
BELDEN
YR41007
COAX
-63
-025
0.235
0.032
75
BELDEN
YR41039
COAX
-22
-009
0.155
0.020
75
BELDEN
YR41679
COAX
_
-014
0.242
0.032
75
BELDEN
YR45056
COAX
*
-026
0.131
0.017
75
BELDEN
YR45301
COAX
*
-026
0.131
0.017
75
BELDEN
YR46359
COAX
_
-023
0.235
0.034
75
BELDEN
YR46400
COAX
-2A
-014
0.242
0.033
75
BELDEN
YR46844
COAX
_
-009
0.155
0.020
75
BRAND REX
T-14670
TWINAX
*
-215
0.237
0.030
_
BRAND REX
T18-11222-24-2/G-0
TWINAX
-27
-223
0.112
0.023
_
BRAND-REX
A-779
COAX
-5
-004
0.090
0.010
_
BRAND-REX
B-749
COAX
-44
105-1940 (220)
0.080
0.012
_
BRAND-REX
M17/183-00001
COAX
-1
-011
0.195
0.035
50
BRAND-REX
T- 378
COAX
-6
-016
0.312
0.031
_
BRAND-REX
T-10971
TWINAX
-24
-221
0.161
0.024
_
BRAND-REX
T-14018
TRIAX
-25A
_
0.250
0.030
_
BRAND-REX
T-2948
TRIAX
-26
_
0.165
0.012
_
BRAND-REX
T-385
COAX
-44
*
0.80
0.012
_
CANFORD
PSF 1/3
COAX
-2B
-015
0.250
0.024
75
COMMSCOPE
5905
COAX
-6A
-051
0.405
0.048
75
COMMSCOPE
222
COAX
-4
-009
0.155
0.024
75
COMMSCOPE
232
COAX
-4
-009
0.155
0.024
75
COMMSCOPE
242
COAX
-6A
0.415
0.064
75
COMMSCOPE
322
COAX
*
-009
0.160
0.020
_
COMMSCOPE
332
COAX
-4
-009
0.155
0.024
75
COMMSCOPE
356
COAX
-6A
_
0.415
0.064
75
COMMSCOPE
357
COAX
-024
0.260
0.040
75
COMMSCOPE
358
COAX
-41
-020
0.280
0.040
75
COMMSCOPE
401
COAX
-22
-009
0.155
0.020
75
COMMSCOPE
2035
COAX
*
-026
0.127
0.016
75
COMMSCOPE
3104
COAX
-1
-011
0.188
0.037
50
COMMSCOPE
3130
COAX
-1
-021
0.201
0.032
50
COMMSCOPE
3135
COAX
-1
-021
0.199
0.035
50
COMMSCOPE
3136
COAX
-1
-011
0.199
0.037
50
COMMSCOPE
3139
COAX
-1
-021
0.202
0.031
50
COMMSCOPE
3140
COAX
-1
-021
0.195
0.033
50
COMMSCOPE
3141
COAX
-41
-020
0.272
0.040
75
Note: * = Special contact customer service
For a complete listing please refer to the online catalog.
APPENDIX
CABLE MANUFACTURER
79
APPENDIX
80
Cable Group Table
CABLE MANUFACTURER
CABLE NUMBER
CABLE TYPE
WRENCH STYLE
CRIMP STYLE
JACKET SIZE
CONDUCTOR
IMPEDANCE
COMMSCOPE
3222
COAX
*
TOO LARGE
0.412
0.106
50
COMMSCOPE
3226
COAX
*
TOO LARGE
0.412
0.106
50
COMMSCOPE
3246
COAX
-6B
_
0.418
0.086
50
COMMSCOPE
3247
COAX
-6B
_
0.418
0.086
50
COMMSCOPE
3249
COAX
-6B
_
0.413
0.086
50
COMMSCOPE
3250
COAX
-48
TOO LARGE
0.413
0.086
50
COMMSCOPE
5060
COAX
-6
*
0.308
0.040
75
COMMSCOPE
5061
COAX
-41
*
0.264
0.040
75
COMMSCOPE
5065
COAX
_
-009
0.160
0.020
92
COMMSCOPE
5535
COAX
*
-026
0.128
0.017
75
COMMSCOPE
5550
COAX
-2
-013
0.242
0.025
75
COMMSCOPE
5551
COAX
-2
-015
0.250
0.025
75
COMMSCOPE
5553
COAX
-2
-014
0.250
0.032
75
COMMSCOPE
5554
COAX
-2
-014
0.250
0.032
75
COMMSCOPE
5555
COAX
-2
-015
0.250
0.025
80
COMMSCOPE
5559
COAX
-2
-013
0.242
0.025
75
COMMSCOPE
5560
COAX
-2
-015
0.250
0.025
73
COMMSCOPE
5563
COAX
-2
-013
0.250
0.023
75
COMMSCOPE
5565
COAX
-2
-014
0.242
0.032
75
COMMSCOPE
5567
COAX
-2
-014
0.250
0.032
75
COMMSCOPE
5569
COAX
-2
-014
0.250
0.032
75
COMMSCOPE
5571
COAX
-2
-014
0.248
0.032
75
COMMSCOPE
5572
COAX
-2
-014
0.248
0.032
75
COMMSCOPE
5573
COAX
-2
-014
0.246
0.032
75
COMMSCOPE
5574
COAX
-2
-014
0.248
0.032
75
COMMSCOPE
5575
COAX
-2
-014
0.246
0.032
75
COMMSCOPE
5585
COAX
-2
-014
0.242
0.032
75
COMMSCOPE
5586
COAX
-2
-014
0.247
0.032
75
COMMSCOPE
5589
COAX
-2A
-022
0.235
0.025
75
COMMSCOPE
5700
COAX
-41
-020
0.280
0.040
75
COMMSCOPE
5701
COAX
-41
-020
0.280
0.040
75
COMMSCOPE
5702
COAX
-41
-020
0.280
0.040
75
COMMSCOPE
5714
COAX
-41
-020
0.280
0.040
75
COMMSCOPE
5715
COAX
-41
-020
0.280
0.040
75
COMMSCOPE
5720
COAX
-41
-020
0.280
0.040
75
COMMSCOPE
5721
COAX
-41
-020
0.272
0.040
75
COMMSCOPE
5723
COAX
-41
-020
0.272
0.040
75
COMMSCOPE
5725
COAX
-41
-020
0.276
0.040
75
COMMSCOPE
5727
COAX
-41
-020
0.280
0.040
75
COMMSCOPE
5728
COAX
-41
-020
0.280
0.040
75
COMMSCOPE
5729
COAX
-41
-020
0.280
0.040
75
COMMSCOPE
5730
COAX
-41
-020
0.280
0.040
75
COMMSCOPE
5731
COAX
-41
-020
0.272
0.040
75
COMMSCOPE
5737
COAX
-41
-020
0.280
0.040
75
COMMSCOPE
5738
COAX
-41
-020
0.272
0.040
75
COMMSCOPE
5740
COAX
-6
*
0.308
0.040
75
COMMSCOPE
5742
COAX
-6
*
0.308
0.040
75
COMMSCOPE
5750
COAX
-6
*
0.308
0.040
75
COMMSCOPE
5765
COAX
-41
-020
0.280
0.040
75
COMMSCOPE
5781
COAX
-6
*
0.306
0.040
75
COMMSCOPE
5782
COAX
-6
*
0.308
0.040
75
COMMSCOPE
5786
COAX
-41
-020
0.280
0.040
75
COMMSCOPE
5787
COAX
-41
-020
0.272
0.040
75
COMMSCOPE
5788
COAX
-41
-020
0.280
0.40
75
Note: * = Special contact customer service
For a complete listing please refer to the online catalog.
Cable Group Table
CABLE NUMBER
CABLE TYPE
WRENCH STYLE
CRIMP STYLE
JACKET SIZE
CONDUCTOR
IMPEDANCE
COMMSCOPE
5789
COAX
-41
-020
0.272
0.040
75
COMMSCOPE
5790
COAX
-41
-020
0.272
0.040
75
COMMSCOPE
5901
COAX
-6A
-053
0.405
0.064
75
COMMSCOPE
5902
COAX
-6A
_
0.415
0.064
75
COMMSCOPE
5903
COAX
-6A
-053
0.405
0.064
75
COMMSCOPE
5904
COAX
-6A
-053
0.405
0.064
75
COMMSCOPE
5906
COAX
-6A
-053
0.405
0.064
75
COMMSCOPE
5908
COAX
-6A
-051
0.405
0.048
75
COMMSCOPE
5909
COAX
-6A
-051
0.405
0.048
75
COMMSCOPE
5910
COAX
-6A
-052
0.395
0.064
75
COMMSCOPE
5912
COAX
-6A
-052
0.395
0.064
75
COMMSCOPE
5913
COAX
-6A
-053
0.405
0.064
75
COMMSCOPE
5914
COAX
-6A
-053
0.405
0.064
75
COMMSCOPE
5914
COAX
-6A
_
0.415
0.064
75
COMMSCOPE
5915
COAX
-6A
-053
0.405
0.064
75
COMMSCOPE
5916
COAX
-6A
-053
0.405
0.064
75
COMMSCOPE
5917
COAX
-6A
-053
0.405
0.064
75
COMMSCOPE
5918
COAX
-6A
_
0.412
0.064
75
COMMSCOPE
5920
COAX
-6A
-053
0.405
0.064
75
COMMSCOPE
5920
COAX
-6A
_
0.415
0.064
75
COMMSCOPE
5940
COAX
-6A
-053
0.405
0.064
75
COMMSCOPE
5950
COAX
-6A
-053
0.415
0.064
75
COMMSCOPE
5950
COAX
-6A
-053
0.405
0.064
75
COMMSCOPE
5951
COAX
-6A
_
0.405
0.064
75
COMMSCOPE
5952
COAX
-6A
_
0.415
0.064
75
COMMSCOPE
5953
COAX
-6A
_
0.415
0.064
75
COMMSCOPE
6200
COAX
-2
-015
0.242
0.025
92
COMMSCOPE
6201
COAX
-2
-013
0.242
0.025
93
COMMSCOPE
6205
COAX
*
-018
0.260
0.025
93
COMMSCOPE
6605
COAX
*
-018
0.267
0.025
93
COMMSCOPE
6608
COAX
-2
-015A
0.249
0.025
93
COMMSCOPE
6609
COAX
-2
-015A
0.249
0.025
93
COMMSCOPE
6611
COAX
-2
-015A
0.242
0.025
93
COMMSCOPE
6612
COAX
-2
-015A
0.242
0.025
93
COMMSCOPE
6615
COAX
-2
-015A
0.249
0.025
93
COMMSCOPE
7500
COAX
-6
-016
0.304
0.032
75
COMMSCOPE
7501
COAX
-6
-016
0.304
0.032
75
COMMSCOPE
7503
COAX
-6
-016
0.304
0.032
75
COMMSCOPE
7505
COAX
-6
-016
0.305
0.032
75
COMMSCOPE
7506
COAX
-6
-016
0.304
0.033
75
COMMSCOPE
7510
COAX
-6
-016
0.304
0.031
75
COMMSCOPE
7530
COAX
_
-054
0.318
0.051
75
COMMSCOPE
7536
COAX
-4
-009
0.150
0.023
75
COMMSCOPE
7537
COAX
-4
-009
0.154
0.023
75
COMMSCOPE
7538
COAX
-37
-009
0.159
0.022
75
COMMSCOPE
7551
COAX
-41
-020
0.272
0.040
75
COMMSCOPE
7573
COAX
-2A
-022
0.220
0.027
75
COMMSCOPE
7713
COAX
-6A
_
0.413
0.086
50
COMMSCOPE
7714
COAX
-6B
TOO LARGE
0.425
0.089
75
COMMSCOPE
7714
COAX
-6B
_
0.432
0.088
50
COMMSCOPE
7715
COAX
-6B
_
0.432
0.088
50
COMMSCOPE
7723
COAX
-3
-012
0.212
0.036
50
COMMSCOPE
7725
COAX
*
-023
0.220
0.036
50
COMMSCOPE
7726
COAX
-3
-012
0.220
0.036
50
Note: * = Special contact customer service
For a complete listing please refer to the online catalog.
APPENDIX
CABLE MANUFACTURER
81
APPENDIX
82
Cable Group Table
CABLE MANUFACTURER
CABLE NUMBER
CABLE TYPE
WRENCH STYLE
CRIMP STYLE
JACKET SIZE
CONDUCTOR
IMPEDANCE
COMMSCOPE
7810
TRIAX
*
TOO LARGE
0.325
0.032
75
COMMSCOPE
9012
TWINAX
-9
_
0.241
0.037
78
COMMSCOPE
57603
COAX
-41
-020
0.272
0.040
75
COMMSCOPE
57604
COAX
-41
-020
0.272
0.040
75
COMMSCOPE
57605
COAX
-41
-020
0.272
0.040
75
COMMSCOPE
72001
COAX
-22
-009
0.155
0.020
75
COMMSCOPE
72012
COAX
-22
-009
0.155
0.020
75
COMMSCOPE
72312
COAX
*
-026
0.127
0.016
75
COMMSCOPE
73501
COAX
*
-026
0.130
0.016
75
COMMSCOPE
73502
COAX
*
-026
0.130
0.016
75
COMMSCOPE
73503
COAX
*
-026
0.130
0.016
75
COMMSCOPE
73506
COAX
*
-026
0.127
0.016
75
COMMSCOPE
73508
COAX
*
-026
0.127
0.016
75
COMMSCOPE
73509
COAX
*
-026
0.127
0.016
75
COMMSCOPE
73512
COAX
*
-026
0.126
0.015
75
COMMSCOPE
75603
COAX
_
-009
0.150
0.022
75
COMMSCOPE
75604
COAX
_
-009
0.150
0.022
75
COMMSCOPE
556510
COAX
-2
-014
0.242
0.032
75
COMMSCOPE
576503
COAX
-41
-020
0.272
0.040
75
COMMSCOPE
576504
COAX
-41
-020
0.272
0.040
75
COMMSCOPE
576505
COAX
-41
-020
0.272
0.040
75
COMMSCOPE
753603
COAX
-4
-009
0.150
0.022
75
COMMSCOPE
753604
COAX
-4
-009
0.150
0.022
75
COMMSCOPE
753605
COAX
-4
-009
0.150
0.022
75
COMMSCOPE
0132K
COAX
*
-024
0.242
0.040
75
COMMSCOPE
0132V
COAX
*
-024
0.242
0.040
75
COMMSCOPE
0219K
COAX
-1
-012
0.200
0.036
50
COMMSCOPE
0247K
COAX
-41
-020
0.268
0.040
75
COMMSCOPE
0247V
COAX
-41
-020
0.268
0.040
75
COMMSCOPE
0359K
COAX
*
-024
0.241
0.041
75
COMMSCOPE
0359K
COAX
*
-024
0.241
0.041
75
COMMSCOPE
2022K
COAX
-2
-023
0.239
0.032
75
COMMSCOPE
2022V
COAX
-2
-23
0.239
0.032
75
COMMSCOPE
2068K
COAX
-63
-025
0.219
0.032
_
COMMSCOPE
2100K
COAX
-21
*
0.169
0.032
50
COMMSCOPE
2100V
COAX
-21
*
0.169
0.032
53
COMMSCOPE
2125K
COAX
-1
-012
0.200
0.036
50
COMMSCOPE
2227K
COAX
-41
-020
0.264
0.040
75
COMMSCOPE
2227V
COAX
-41
*
0.264
0.040
75
COMMSCOPE
2229V
COAX
-41
-020
0.268
0.040
75
COMMSCOPE
2274V
COAX
*
-024
0.241
0.040
75
COMMSCOPE
2275K
COAX
*
-024
0.241
0.040
75
COMMSCOPE
2275V
COAX
*
-024
0.241
0.040
75
COMMSCOPE
2276V
COAX
*
-024
0.241
0.040
75
COMMSCOPE
2278K
COAX
*
-024
0.242
0.040
75
COMMSCOPE
2291K
TWINAX
-25
_
0.260
0.039
100
COMMSCOPE
2525K
COAX
*
-016
0.290
0.031
75
COMMSCOPE
2527K
COAX
-41
*
0.279
0.032
75
COMMSCOPE
425-0256
COAX
_
-025
0.240
0.033
75
COMMSCOPE
5060F
COAX
-6
*
0.308
0.040
75
COMMSCOPE
5060R
COAX
-6
*
0.308
0.040
75
COMMSCOPE
5550M
COAX
-2
-013A
0.242
0.030
75
COMMSCOPE
5568M
COAX
*
-025
0.240
0.033
_
COMMSCOPE
5726R
COAX
-41
-020
0.276
0.041
75
Note: * = Special contact customer service
For a complete listing please refer to the online catalog.
Cable Group Table
CABLE NUMBER
CABLE TYPE
WRENCH STYLE
CRIMP STYLE
JACKET SIZE
CONDUCTOR
IMPEDANCE
COMMSCOPE
5740F
COAX
-6
*
0.308
0.038
75
COMMSCOPE
5740H1
COAX
-6
*
0.308
0.040
75
COMMSCOPE
5740R
COAX
-6
*
0.308
0.040
75
COMMSCOPE
5913R
COAX
-6A
_
0.415
0.064
75
COMMSCOPE
5916R
COAX
-6A
TOO LARGE
0.415
0.064
75
COMMSCOPE
720T1
COAX
-22
-009
0.155
0.020
75
COMMSCOPE
720T2
COAX
-22
-009
0.155
0.020
75
COMMSCOPE
734C()
COAX
-63
-025
0.236
0.032
75
COMMSCOPE
734C1H
COAX
-63
-025
0.236
0.032
75
COMMSCOPE
734C1P
COAX
-63
*
0.219
0.032
75
COMMSCOPE
734S( )
COAX
-63
-025
0.236
0.032
75
COMMSCOPE
734S1H
COAX
-63
-025
0.236
0.032
75
COMMSCOPE
734ST
COAX
-63
-025
0.236
0.032
75
COMMSCOPE
734STH
COAX
-63
-025
0.236
0.032
75
COMMSCOPE
735(#)
COAX
*
-026
0.130
0.016
75
COMMSCOPE
735()H
COAX
*
-026
0.129
0.016
75
COMMSCOPE
735()P
COAX
*
-026
0.127
0.016
75
COMMSCOPE
73501B
COAX
_
-026
0.137
0.016
75
COMMSCOPE
73501H
COAX
*
-026
0.127
0.016
75
COMMSCOPE
73502H
COAX
*
-026
0.127
0.016
75
COMMSCOPE
735T()H
COAX
*
-026
0.129
0.016
75
COMMSCOPE
735T2
COAX
*
-026
0.126
0.016
75
COMMSCOPE
F1160BV
COAX
-6A
*
0.395
0.064
75
COMMSCOPE
F1160BVV
COAX
-6A
*
0.395
0.064
75
COMMSCOPE
F11SSEF
COAX
-6A
_
0.405
0.064
75
COMMSCOPE
F11SSVV
COAX
-6A
TOO LARGE
0.395
0.064
_
COMMSCOPE
F5967BVM
COAX
-2
-014
0.240
0.032
75
COMMSCOPE
F5967BVV
COAX
-2
-014
0.240
0.032
75
COMMSCOPE
F660BVV
COAX
-41
-020
0.272
0.040
75
COMMSCOPE
F6SSEF
COAX
-6
*
0.300
0.040
75
COMMSCOPE
F6SSVM-APDI-22-APD
COAX
_
-020
0.281
0.040
75
COMMSCOPE
OP73801DB
COAX
-6
*
0.290
0.040
75
COMMSCOPE
VDM230
COAX
_
-009
0.171
0.023
75
COMMSCOPE
WBC-300(R)
COAX
-6
*
0.070
0.070
50
COMMSCOPE
5726
COAX
-41
-020
0.272
0.040
74
COMPOSITE VIDEO
VA-2/2
COAX
_
-009
_
_
75
COMPREHENSIVE VIDEO
CVC-59STXF
COAX
-2
-023
0.236
0.031
75
CONSOLIDATED
4459
COAX
-5
-003
0.105
0.019
50
CONSOLIDATED
4462
TRIAX
*
_
0.485
0.091
50
DRAKA
0.6/3.7
COAX
_
-022
0.237
0.024
75
DRAKA
IMAGE720
COAX
_
-019
0.232
0.031
75
DRAKA-HELEX
32448A
COAX
_
-030
_
_
75
DRAKE
IMAGE1000
COAX
_
-020
0.268
0.039
75
ESSEX
1000
COAX
-6A
_
0.405
0.085
_
ESSEX
21-004
COAX
-6A
_
0.405
0.085
_
ESSEX
21-025
COAX
-2
_
0.242
0.025
_
ESSEX
21-204
TRIAX
-42
_
0.285
0.036
_
ESSEX
21-529
TRIAX
-14
_
0.460
0.049
_
ESSEX
21-537
COAX
-1
-011
0.195
0.036
_
ESSEX
21-541
COAX
-2
-013
0.242
0.025
_
ESSEX
21-583
TRIAX
-15
TOO LARGE
0.490
0.085
53
ESSEX
21-597
COAX
-22
-009
0.150
0.017
_
ESSEX
21-780
COAX
-6B
_
0.420
0.087
_
ESSEX
21-795
COAX
-2
_
0.242
0.023
_
Note: * = Special contact customer service
For a complete listing please refer to the online catalog.
APPENDIX
CABLE MANUFACTURER
83
APPENDIX
84
Cable Group Table
CABLE MANUFACTURER
CABLE NUMBER
CABLE TYPE
WRENCH STYLE
CRIMP STYLE
JACKET SIZE
CONDUCTOR
IMPEDANCE
ESSEX
421-098
COAX
-22
-008
0.145
0.012
_
ESSEX
421-111
COAX
-22
-008
0.155
0.012
_
ESSEX
421-176
COAX
-1
_
0.195
0.039
_
ESSEX
621-100
COAX
-6A
_
0.405
0.064
_
ESSEX
621-106
TRIAX
-7
_
0.242
0.025
_
ESSEX
621-243
COAX
-41
_
0.270
0.040
_
ESSEX
621-284
COAX
-41
_
0.270
0.040
_
ESSEX
621-715
COAX
-1
*
0.195
0.025
_
FILOTEX
63247
TWINAX
_
-212
0.179
0.025
_
FILOTEX
96770
TWINAX
-47
_
0.142
0.024
_
FILOTEX
374693
COAX
-22
-009
0.149
0.020
_
FILOTEX
ET39110ED2
TRIAX
-15
TOO LARGE
0.490
0.064
_
FILOTEX
L910/39
COAX
-22
-009
0.155
0.020
_
FILOTEX
L910-42
COAX
-22
-009
0.155
0.020
_
FILOTEX
SP714
TRIAX
-23
_
0.138
0.012
75
GEPCO
7174
COAX
-5
-003
0.101
0.019
50
GEPCO
7537
COAX
-4
-009
0.160
0.023
75
75
GEPCO
7538
COAX
-37
-009
0.159
0.023
GEPCO
LVT61811
TRIAX
-15
TOO LARGE
0.516
0.068
75
GEPCO
RGB6000
COAX
-6
-016
0.304
0.032
75
GEPCO
RGB809
COAX
-22
-009
0.150
0.021
75
GEPCO
RGBS809
COAX
-22
-009
0.150
0.021
75
GEPCO
RGBSC809
COAX
-22
-009
0.150
0.021
75
GEPCO
V61859M
COAX
-2
_
0.242
0.030
75
GEPCO
V618J59
COAX
-2
-013
0.242
0.023
75
GEPCO
V618M59
COAX
-2
-013
0.242
0.023
75
GEPCO
VDFM809
COAX
-22
-009
0.150
0.021
75
GEPCO
VE61859
COAX
-2
-013A
0.242
0.030
75
GEPCO
VE61859M
COAX
-2
-013A
0.242
0.030
75
GEPCO
VFM809
COAX
-22
-009
0.150
0.022
75
GEPCO
VP6000
COAX
-6
-016
0.304
0.032
75
GEPCO
VP618PE/AP
COAX
-6
-016
0.304
0.032
75
GEPCO
VP618PE01
COAX
-6
-016
0.304
0.031
75
GEPCO
VP618PVC
COAX
-6
-016
0.304
0.032
75
GEPCO
VP618TK
COAX
-41
*
0.276
0.032
75
GEPCO
VPM1000
COAX
-2
-013
0.242
0.023
75
GEPCO
VPM2000
COAX
-2
-014
0.242
0.032
75
GEPCO
VPM618
COAX
-2A
-022
0.220
0.027
75
GEPCO
VS102000
COAX
-2
-014
0.243
0.032
75
GEPCO
VSD2001
COAX
-41
-020
0.273
0.040
75
GEPCO
VSM618
COAX
-22
-009
0.150
0.017
75
GEPCO
VT61811
TRIAX
-14
TOO LARGE
0.474
0.065
75
GORE
03352/CX
TRIAX
_
-303
0.150
0.012
_
GORE
C06C032
COAX
-5A
-001
0.075
0.019
_
GORE
CXA-8220
TRIAX
-60
-305
0.187
0.025
_
GORE
CXN-1352B
COAX
-44
*
0.078
0.016
_
GORE
CXN-1362
COAX
-36
_
0.101
0.031
_
GORE
CXN-1388
COAX
-5
-003
0.110
0.020
_
GORE
CXN-1456
COAX
-44
_
0.74
0.019
_
GORE
CXN-1722
COAX
-86
*
0.086
0.012
_
GORE
CXN-1939
COAX
-44
*
0.78
0.010
93
GORE
CXN-2223
TWINAX
-24
_
0.141
0.025
_
GORE
CXN-2268
TWINAX
_
-204
0.135
0.025
_
GORE
CXN-2363
TWINAX
_
-221
0.166
0.025
_
Note: * = Special contact customer service
For a complete listing please refer to the online catalog.
Cable Group Table
CABLE MANUFACTURER
CABLE NUMBER
CABLE TYPE
WRENCH STYLE
CRIMP STYLE
JACKET SIZE
CONDUCTOR
IMPEDANCE
GORE
CXN-2702
TWINAX
_
-221
0.166
0.025
100
GORE
CXN-3101
COAX
-5
-004
0.93
0.012
75
GORE
CXN-3162
TWINAX
*
-223
0.112
0.021
100
GORE
CXN-3194
TWINAX
_
-204
0.138
0.024
80
GORE
CXN3268
TRIAX
-27 (150)
_
0.100
0.012
50
GORE
DXSN-1747
COAX
-44
-001
0.080
0.011
_
GORE
DXSN-1888
TWINAX
_
-203
0.148
0.015
150
GORE
DXSN1892
COAX
-36
*
0.103
0.018
_
GORE
GBL-075-024
TWINAX
-29
-204
0.132
0.025
_
GORE
GCX-075-26-REV A
COAX
-36
*
0.099
0.019
_
GORE
GSC 03-2236-00
COAX
_
-004
0.092
0.012
75
GORE
GSC-01-81457-00
TWINAX
-27
-209
0.118
0.016
120
GORE
GSC-05-80583-00
TWINAX
_
-202
0.145
0.021
_
GORE
GSC-12-1381-01
TWINAX
-45
_
0.160
0.024
_
GRUMMAN
GC875ACH1
TWINAX
*
-224
0.190
0.024
98
GRUMMAN
GC875GBI
TRIAX
-57
-302
0.164
0.033
_
GRUMMAN
GC875GC1
TRIAX
-56
-301
0.164
0.012
_
GRUMMAN
GC875GP1
COAX
-31
-006
0.128
0.020
_
GRUMMAN
GC875LNI
TWINAX
59
_
0.167
0.020
_
GRUMMAN
GC875PD1
COAX
-5A
_
0.063
0.012
_
GRUMMAN
GC875RM1
TWINAX
-45
-204
0.144
0.025
_
GRUMMAN
GC875RR1
QUADRAX
-33
-220
0.179
0.025
_
GRUMMAN
GC875TM24H
TRIAX
-58
-221
0.160
0.025
_
GRUMMAN
GC875TMH
TWINAX
-45
-204
0.146
0.025
_
H.P.
TXA114-P
TRIAX
*
*
0.217
0.021
_
HEWLETT PACKARD
8120-0049
COAX
-4
-008
0.155
0.010
_
HEWLETT PACKARD
8120-0552-1
COAX
-5B
*
0.110
0.015
50
HEWLETT PACKARD
8120-0789
COAX
-5B
_
0.110
0.015
_
HEWLETT PACKARD
8120-1105
COAX
-5B
-002
0.110
0.015
_
HEWLETT PACKARD
8120-1289
COAX
-2B
-015
0.255
0.025
_
HEWLETT PACKARD
8120-4461
COAX
-5
-003
0.093
0.018
50
HEWLETT PACKARD
8120-9026
COAX
-5B
_
0.110
0.015
_
HEWLETT PACKARD
A-8120-9077-1
COAX
-5
*
0.110
0.015
_
HITACHI
HCM-39441/1
COAX
*
-027
0.128
0.016
75
HITACHI
HCM-9441/12
COAX
*
-026
0.133
0.016
75
HITEMP
117P80660
COAX
-50
_
0.375
0.086
_
HITEMP
RD1152
COAX
*
-026
0.132
0.016
75
HITEMP
RD1152-2
COAX
-22
*
0.143
0.016
75
JUDD
740
COAX
_
-004
0.080
0.010
75
JUDD
735S01
COAX
*
-026
0.134
0.018
75
JUDD
C1401053
COAX
-63
-025
0.232
0.031
75
JUDD
C1401064
COAX
*
-026
0.132
0.016
75
JUDD
C1401741
COAX
_
-004
0.099
0.010
75
JUDD WIRE INC
SS502401
COAX
-5
-003
_
_
_
KEITHLEY
SC-22
TRIAX
-23
*
0.145
0.024
40
KEITHLEY
SC-9
COAX
-1
-021
0.195
0.035
50
LUCENT
407529262
COAX
-5
-004
0.106
0.010
75
LUCENT
848068607
COAX
-37
*
0.166
0.016
75
LUCENT
106 309 206 (2734A)
COAX
_
-025
0.225
0.031
75
LUCENT
1928 001A 1C/36
COAX
*
-026
0.133
0.015
75
LUCENT
735C
COAX
*
-026
0.139
0.016
75
LUCENT
KS23918 L2
COAX
_
-004
0.089
0.013
75
WP91681 L2
COAX
_
-004
0.089
0.013
75
2250-E82832
COAX
-53
-022
_
_
_
Note: * = Special contact customer service
For a complete listing please refer to the online catalog.
APPENDIX
LUCENT
M/A-COM
85
APPENDIX
86
Cable Group Table
CABLE MANUFACTURER
CABLE NUMBER
CABLE TYPE
WRENCH STYLE
CRIMP STYLE
JACKET SIZE
CONDUCTOR
IMPEDANCE
MADISON
022H22BZID
TWINAX
-9
_
0.250
0.038
100
MADISON
12CFE00002
COAX
_
-009
0.158
0.020
75
MADISON
12EEK00001
COAX
_
-026
0.132
0.016
75
MADISON CABLE CORP
6096
COAX
-21
*
0.158
0.037
_
MICRODOT
202-3927-0000
TWINAX
-27
-208
0.110
0.011
117
MICRODOT
202-3934-0000
TWINAX
-24
-211
0.145
0.013
160
MICRODOT
202-3942-0000
TWINAX
-27
-209
0.207
0.025
110
MICRODOT
202-4547
TWINAX
-24
-211
0.098
0.020
160
MICRODOT
250-3833-0000
TRIAX
*
-303
0.270
0.030
_
MICRODOT
250-3834-0000
COAX
-5A
-001
0.400
0.095
50
MICRODOT
250-3902-0000
COAX
-5A
-001
0.141
0.036
50
MICRODOT
250-3908-0000
COAX
-5A
-001
0.128
0.012
50
MICRODOT
250-3909-0000
COAX
-44
*
0.087
0.021
50
MICRODOT
250-3920-0000
COAX
-5A
-001
0.087
0.021
50
MICRODOT
250-3967-0000
COAX
-5
-003
0.087
0.021
50
MICRODOT
250-4021-0000
COAX
-31
*
0.245
0.035
50
MICRODOT
250-4044-0000
TRIAX
-43
_
0.245
0.033
50
MICRODOT
250-4045-0000
TRIAX
-43
-302
0.500
0.089
50
MICRODOT
250-4070-0000
TRIAX
-56
-302
0.500
0.081
50
MICRODOT
250-4172-0000
COAX
*
_
0.500
0.089
50
MICRODOT
250-4180-0000
COAX
-5
-003
0.500
0.081
50
MICRODOT
250-4804-0000
TRIAX
-32
-203
0.105
0.012
50
MICRODOT
250-4816-0009
TRIAX
-27
_
0.145
0.013
50
MICRODOT
275-3930-000
TRIAX
_
_
0.102
0.021
75
MICRODOT
275-3933-0000
COAX
-4
-009
0.120
0.021
75
MICRODOT
275-3991
COAX
-36
*
0.200
0.038
75
MICRODOT
293-3902
COAX
*
-026
0.160
0.031
93
MICRODOT
293-3922-0000
TRIAX
-60
-305
0.200
0.039
93
MICRODOT
293-3930-0000
TRIAX
-43
_
0.336
0.057
100
MICRODOT
293-3968-0000
COAX
-22
-008
0.412
0.090
93
MICRODOT
295-3801-0000
COAX
-22
-008
0.432
0.090
95
MICRODOT
295-3802-0000
COAX
-22
*
0.432
0.090
95
MICRODOT
295-3950-0000
TRIAX
-43
_
0.216
0.036
95
MICRODOT
295-3952-0000
TRIAX
-43
_
0.075
0.013
95
MICRODOT
295-3992-000
COAX
-36
-007
0.288
0.060
95
MICRODOT
295-3993-0000
TRIAX
-64
-303
0.102
0.021
95
MILESTEK
30-01010
COAX
-2
-013
0.195
0.013
75
MIL-SPEC
2C2219EXJ
TWINAX
-47
-206
0.336
0.029
_
MIL-SPEC
M17/015-RG022
TWINAX
-10
_
0.475
0.048
95
MIL-SPEC
M17/094-RG179
COAX
-5
-004
0.105
0.013
75
MIL-SPEC
M17/095-RG180
COAX
-22
-008
0.145
0.013
95
MIL-SPEC
M17/113-RG316
COAX
-5
-003
0.098
0.020
50
0.141
0.036
50
*
0.087
0.021
50
MIL-SPEC
M17/130-RG402
COAX
-141
MIL-SPEC
M17/133-00002
COAX
-86
MIL-SPEC
M17/133-RG405
COAX
-86
*
0.087
0.021
50
MIL-SPEC
M17/134-00001
TRIAX
-7
-306
0.245
0.035
50
50
MIL-SPEC
M17/134-00002
TRIAX
-7
-306
0.245
0.033
MIL-SPEC
M17/135-00001
TRIAX
-14A
TOO LARGE
0.500
0.089
50
MIL-SPEC
M17/135-00003
TRIAX
-14A
_
0.500
0.081
50
MIL-SPEC
M17/135-00004
TRIAX
-14A
TOO LARGE
0.500
0.089
50
MIL-SPEC
M17/135-00005
TRIAX
-14A
TOO LARGE
0.500
0.081
50
MIL-SPEC
M17/135-00006
TRIAX
-14A
TOO LARGE
0.500
0.081
50
MIL-SPEC
M17/136-00001
COAX
-5
-004
0.105
0.012
75
MIL-SPEC
M17/137-00001
COAX
-22
-008
0.145
0.013
95
Note: * = Special contact customer service
For a complete listing please refer to the online catalog.
Cable Group Table
CABLE MANUFACTURER
CABLE NUMBER
CABLE TYPE
WRENCH STYLE
CRIMP STYLE
JACKET SIZE
CONDUCTOR
IMPEDANCE
MIL-SPEC
M17/138-00001
COAX
-5
-003
0.102
0.021
50
MIL-SPEC
M17/152-00001
COAX
-5
-006
0.120
0.021
50
MIL-SPEC
M17/155-00001
COAX
-1
-011
0.200
0.038
50
MIL-SPEC
M17/157-00001
COAX
-4
-010
0.160
0.031
50
MIL-SPEC
M17/158-00001
COAX
-1
-012
0.200
0.039
50
MIL-SPEC
M17/162-00001
COAX
-6E
_
0.336
0.057
50
MIL-SPEC
M17/163-00001
COAX
-6A
_
0.412
0.090
50
MIL-SPEC
M17/164-00001
COAX
-6B
_
0.432
0.090
50
MIL-SPEC
M17/164-00002
COAX
-6B
_
0.432
0.090
50
MIL-SPEC
M17/167-00001
COAX
-3
-012
0.216
0.036
50
MIL-SPEC
M17/169-00001
COAX
-5A
-001
0.075
0.013
50
MIL-SPEC
M17/170-00001
COAX
-21
-011
0.175
0.038
50
MIL-SPEC
M17/171-00001
COAX
-41
_
0.288
0.060
50
MIL-SPEC
M17/172-00001
COAX
-5
-003
0.102
0.021
50
MIL-SPEC
M17/173-00001
COAX
-5
-003
0.100
0.019
50
MIL-SPEC
M17/174-00001
COAX
-6A
_
0.400
0.090
50
MIL-SPEC
M17/175-00001
COAX
-1
-012
0.200
0.039
50
MIL-SPEC
M17/176-00002
TWINAX
-47
-201
0.134
0.024
77
MIL-SPEC
M17/177-00001
TRIAX
-60
-305
0.189
0.013
95
MIL-SPEC
M17/179-00001
TRIAX
*
-305
0.195
0.013
75
MIL-SPEC
M17/180-00001
COAX
-6E
-017
0.336
0.029
75
MIL-SPEC
M17/181-00001
COAX
-6A
_
0.412
0.050
75.E
MIL-SPEC
M17/184-00001
COAX
-2
-013
0.246
0.024
75
MIL-SPEC
M17/186-00001
TWINAX
-9 ***
-213
0.245
0.040
78
MIL-SPEC
M17/187-00001
COAX
-4
*
0.160
0.031
50
MIL-SPEC
M17/189-00001
COAX
-6A
_
0.412
0.090
50
MIL-SPEC
M17/190-00001
COAX
-6B
TOO LARGE
0.432
0.089
50
MIL-SPEC
M17/196-00001
COAX
-5
*
0.115
0.019
50
MIL-SPEC
M17/200-00001
COAX
-3
-012
0.216
0.036
50
MIL-SPEC
M17/29-RG59
COAX
-2
-013
0.245
0.023
75
MIL-SPEC
M17/2-RG6
COAX
-6E
-017
0.336
0.029
75
MIL-SPEC
M17/30-RG062
COAX
-2B
-013
0.250
0.025
93
MIL-SPEC
M17/31-RG63
COAX
-6A
_
0.415
0.026
125
MIL-SPEC
M17/45-RG108
TWINAX
-9
-213
0.235
0.038
78
MIL-SPEC
M17/47-RG114
COAX
-6A
_
0.415
0.08
185
MIL-SPEC
M17/60-RG142
COAX
-1
-012
0.200
0.040
50
MIL-SPEC
M17/62-RG144
COAX
-6B
TOO LARGE
0.412
0.0525
75
MIL-SPEC
M17/6-RG11
COAX
-6A
-053
0.412
0.050
75
MIL-SPEC
M17/77-RG216
COAX
-6B
_
0.432
0.050
75
MIL-SPEC
M17/84-RG223
COAX
-3
-012
0.216
0.035
50
MIL-SPEC
M17/86-00001
COAX
-6B
_
0.440
0.094
50
MIL-SPEC
M17/90-RG71
COAX
-2B
-015A
0.250
0.025
93
MIL-SPEC
M17/97-RG210
COAX
-2B
-013B
0.250
0.026
93
MIL-SPEC
M27500-22TE2T14
TWINAX
-45
-210
0.137
0.032
_
MIL-SPEC
M27500-22TN2N06
TWINAX
-29
-201
0.134
0.029
_
MIL-SPEC
M27500-24S82T23
TWINAX
_
-208
0.101
0.021
78
MONTROSE
9835-735
COAX
*
-026
0.135
0.015
75
MONTROSE
CDT 735A
COAX
_
-026
0.129
0.016
75
MONTROSE
IFX4385
COAX
_
-004
0.100
0.013
75
MONTROSE/CDT
CBL 1225
TWINAX
_
-225
0.200
0.022
124
MONTROSE/CDT
CBL 1233
COAX
-2A
-025
0.225
0.033
75
MONTROSE/CDT
CBL 1235
COAX
-2A
-025
0.235
0.031
75
CBL 1288-()
COAX
_
-026
0.129
0.016
75
CBL 2108
COAX
-2A
-025
0.235
0.031
75
APPENDIX
MONTROSE/CDT
MONTROSE/CDT
Note: * = Special contact customer service
For a complete listing please refer to the online catalog.
87
APPENDIX
88
Cable Group Table
CABLE MANUFACTURER
CABLE NUMBER
CABLE TYPE
WRENCH STYLE
CRIMP STYLE
JACKET SIZE
CONDUCTOR
IMPEDANCE
MONTROSE/CDT
CBL 2109
COAX
-2A
-025
0.241
0.034
75
MONTROSE/CDT
CBL 2721
TRIAX
-7
-306
0.250
0.037
50
MONTROSE/CDT
CBL 2726
COAX
*
-026
0.133
0.016
75
MONTROSE/CDT
CBL 7820
COAX
-21
*
0.165
0.035
_
MONTROSE/CDT
CBL 9835-735
COAX
*
-026
0.136
0.014
75
MONTROSE/CDT
CBL 9956
TWINAX
-56
*
0.170
0.037
78
MONTROSE/CDT
CBL3340
COAX
_
-004
0.077
0.011
75
NATIONAL WIRE & CABLE
S10-9723
TWINAX
-55
-214
0.226
0.021
_
NAVAIR
67A37A130
COAX
-4
*
0.140
0.031
_
NAVSEA
6322369
TRIAX
-60
_
0.188
0.029
50
NORTHERN TELECOM
NT-734
COAX
_
-025
_
_
_
NORTHERN TELECOM
NT-735
COAX
*
-026
0.130
0.016
75
PIC WIRE
L8620TX
TRIAX
-60
_
0.178
0.035
_
PIC WIRE & CABLE
L2201TX
TRIAX
-25A
-306
0.250
0.038
50
PIC WIRE & CABLE
S33141
COAX
-41
_
0.272
0.067
_
RAYCHEM
EPD49311Q
COAX
-1
-021
0.197
0.035
50
RAYCHEM
10584
TRIAX
-24A
_
0.148
0.012
_
RAYCHEM
10586
TRIAX
-24A
_
0.148
0.012
_
RAYCHEM
10595
TWINAX
*
-204
0.133
0.025
_
RAYCHEM
10599
TWINAX
-24
-210
0.145
0.031
_
RAYCHEM
10600
TWINAX
*
-213
0.216
0.032
_
RAYCHEM
10602
TWINAX
-45
-204
0.144
0.025
_
RAYCHEM
10606
TWINAX
*
-223
0.117
0.021
75
RAYCHEM
10612
TWINAX
*
-204
0.128
0.025
77
RAYCHEM
10613
TWINAX
*
-222
0.154
0.025
77
RAYCHEM
10614
TWINAX
-24
-221
0.161
0.025
77
RAYCHEM
0024A0024
TWINAX
-24
-217
0.152
0.025
100
RAYCHEM
0528A0424
TWINAX
-47
_
0.116
0.015
105
RAYCHEM
10598-30-9X
TRIAX
*
-303
0.148
0.012
_
RAYCHEM
10612-24-9
TWINAX
*
-204
0.132
0.027
77
RAYCHEM
1301-TZD 101 06 UX
TWINAX
-55
-204
0.217
0.024
_
RAYCHEM
2524A0424
TWINAX
*
-212
0.172
0.025
125
RAYCHEM
2524E0311-9
TWINAX
*
-224
0.201
0.025
125
RAYCHEM
2524F0524
TWINAX
*
-218
0.148
0.025
125
RAYCHEM
2524K0524
TWINAX
-55
-224
0.194
0.025
125
RAYCHEM
2526D1114
TWINAX
*
-219
0.144
0.019
125
RAYCHEM
2526E1114
TWINAX
-24
-219
0.147
0.019
125
RAYCHEM
2530A0314
TWINAX
-27
-208
0.105
0.012
125
RAYCHEM
2530A1317
COAX
-63
_
0.203
0.013
125
RAYCHEM
44M9996-20-2/6-0
TWINAX
-24
*
0.157
0.039
_
RAYCHEM
5012A3311
COAX
-50
_
0.350
0.088
50
RAYCHEM
5012W5812
TRIAX
-61
*
0.437
0.089
50
RAYCHEM
5020A1311
COAX
-4
*
0.155
0.040
50
RAYCHEM
5020A1811
COAX
-21
*
0.165
0.039
50
RAYCHEM
5021D1331
COAX
*
-021
0.188
0.035
50
RAYCHEM
5021H5331
TRIAX
-25A
_
0.258
0.035
50
RAYCHEM
5022D5112
TRIAX
-43
_
0.175
0.032
50
RAYCHEM
5022D5311
TRIAX
-43
_
0.175
0.032
50
RAYCHEM
5022E5111
TRIAX
-57
-302
0.164
0.033
50
RAYCHEM
5024A1311
COAX
-36
*
0.104
0.025
50
RAYCHEM
5024A1661
TWINAX
-27
*
0.108
0.025
50
RAYCHEM
5024A3111
COAX
-5
-003
0.113
0.019
50
RAYCHEM
5026A1111
COAX
-44
_
0.080
0.019
50
RAYCHEM
5026A1614
COAX
-44
_
0.080
0.019
50
Note: * = Special contact customer service
For a complete listing please refer to the online catalog.
Cable Group Table
CABLE NUMBER
CABLE TYPE
WRENCH STYLE
CRIMP STYLE
JACKET SIZE
CONDUCTOR
IMPEDANCE
RAYCHEM
5026A1664
TWINAX
-49
*
0.085
0.019
50
RAYCHEM
5026D5314
TRIAX
-23
_
0.132
0.019
50
RAYCHEM
5028A2211-9
COAX
-44
_
_
0.013
50
RAYCHEM
5028A3318
COAX
-5B
-004
0.090
0.014
50
RAYCHEM
5030A1114
COAX
-5A
-001
0.061
0.012
50
RAYCHEM
5030A1214
COAX
-5A
_
0.061
0.012
50
RAYCHEM
5030A1314
COAX
-5A
_
0.063
0.012
50
RAYCHEM
5030A1318
COAX
-5A
_
0.063
0.012
_
RAYCHEM
5030A1411
COAX
-5A
_
0.066
0.012
50
RAYCHEM
5030A1511
COAX
-5A
_
0.066
0.012
50
RAYCHEM
55A1121-24
TWINAX
-27
-223
0.107
0.025
_
RAYCHEM
55A1122-26
TWINAX
*
-223
0.102
0.021
_
RAYCHEM
7028A5518
TRIAX
-26
_
0.143
0.015
70
RAYCHEM
7520A1311
COAX
-52
-024
0.241
0.040
75
RAYCHEM
7522A1311
COAX
_
-023
_
_
75
RAYCHEM
7522D5311
TRIAX
-25A
_
0.269
0.031
75
RAYCHEM
7523D1331
COAX
-2
-013
0.246
0.023
75
RAYCHEM
7524A1311
COAX
-21
_
0.160
0.025
75
RAYCHEM
7524A1312
COAX
-22
_
0.152
0.025
75
RAYCHEM
7524A1811
COAX
-37
_
0.152
0.025
75
RAYCHEM
7524D5811
TRIAX
_
-306
0.243
0.025
_
RAYCHEM
7526A5311
TRIAX
-60
_
0.215
0.019
75
RAYCHEM
7526D5318
TWINAX
-59
_
0.167
0.020
75
RAYCHEM
7526J1660
TWINAX
-47
_
0.115
0.019
75
RAYCHEM
7528A1114
COAX
-36
-004
0.100
0.015
75
RAYCHEM
7528A1317
COAX
-5
-004
0.102
0.015
75
RAYCHEM
7528A5314
TRIAX
-64
-303
0.148
0.015
75
RAYCHEM
7528F5614
TRIAX
*
-303
0.141
0.015
75
RAYCHEM
7528G1312-7
COAX
-36
*
0.110
0.015
_
RAYCHEM
7720C8662
TWINAX
-213
_
0.020
77
RAYCHEM
7722C2664
TWINAX
-24
-210
0.143
0.032
77
RAYCHEM
7722C3661
TWINAX
-24
*
0.178
0.032
77
RAYCHEM
7722C3861
TWINAX
*
-215
0.232
0.031
77
RAYCHEM
7724C1664-9
TWINAX
*
-204
0.127
0.023
77
RAYCHEM
7724C3864
TWINAX
*
-212
0.200
0.024
77
RAYCHEM
7724C8664
TWINAX
*
-221
0.155
0.025
_
RAYCHEM
7724G3664
TWINAX
-45
-222
0.154
0.025
77
RAYCHEM
7724N0664
TWINAX
-45
-204
0.144
0.025
78
RAYCHEM
7726D066A
TWINAX
-27
-223
0.112
0.020
77
RAYCHEM
7824E0422
TWINAX
-29
-204
0.135
0.025
78
RAYCHEM
7826D0130
TWINAX
-29
-206
0.120
0.025
78
RAYCHEM
9324D0130
TWINAX
*
212
0.167
0.025
93
RAYCHEM
9528A1317
COAX
*
-026
0.137
0.015
95
RAYCHEM
9528A1417
COAX
*
-026
0.137
0.015
95
RAYCHEM
9528A1517
COAX
*
-026
0.137
0.015
95
RAYCHEM
9528D5114
TRIAX
-60
-305
0.177
0.015
95
RAYCHEM
9530A5117
TRIAX
-24A
_
0.149
0.012
_
RAYCHEM
9530D5117
TRIAX
-56
-301
0.164
0.013
95
RAYCHEM
9530D5317
TRIAX
-59
_
0.170
0.012
95
RAYCHEM
9530H1118
COAX
-36
_
0.108
0.013
95
RAYCHEM
9532A5114
TRIAX
-23
_
0.140
0.008
95
RAYCHEM
9532A5314
TRIAX
-23
_
0.130
0.008
95
RAYCHEM
EPC29116C
TRIAX
-32
-309
0.152
0.017
_
RAYCHEM
EPD 60441
TRIAX
-25A
TOO LARGE
0.256
0.035
50
Note: * = Special contact customer service
For a complete listing please refer to the online catalog.
APPENDIX
CABLE MANUFACTURER
89
APPENDIX
90
Cable Group Table
CABLE MANUFACTURER
CABLE NUMBER
CABLE TYPE
WRENCH STYLE
CRIMP STYLE
JACKET SIZE
CONDUCTOR
IMPEDANCE
RAYCHEM
EPD22030E
TWINAX
*
-224
0.209
0.026
_
RAYCHEM
EPD22030F
TWINAX
_
-215
0.251
0.025
_
RAYCHEM
EPD22188B
TWINAX
_
-218
0.150
0.025
_
RAYCHEM
EPD26467Q
TRIAX
-23
-303
0.136
0.012
_
RAYCHEM
EPD27364A
TWINAX
-11
TOO LARGE
0.311
0.038
77
RAYCHEM
EPD29102A
COAX
-2
-013
0.243
0.023
75
RAYCHEM
EPD30653Q
TWINAX
*
-217
0.150
0.025
_
RAYCHEM
EPD33017Q
COAX
-5
-003
0.106
0.020
_
RAYCHEM
EPD33698Q
TRIAX
-32
_
0.142
0.015
_
RAYCHEM
EPD33727Q
TRIAX
-33
_
0.185
0.012
_
RAYCHEM
EPD38474Q
TRIAX
-13
TOO LARGE
0.330
0.022
_
RAYCHEM
EPD44692
TWINAX
-29
-217
0.146
0.025
77
RAYCHEM
EPD46270Q
TRIAX
-9
-306
0.260
0.037
_
RAYCHEM
EPD49317Q
COAX
-63
_
0.228
0.025
75
RAYCHEM
EPD49334Q
TRIAX
-8
TOO LARGE
0.322
0.023
75
RAYCHEM
EPD49336Q
TRIAX
-13A
TOO LARGE
0.322
0.023
_
RAYCHEM
EPD49338Q
TWINAX
-9
_
_
_
_
RAYCHEM
EPD60947Q
TRIAX
-7
_
0.260
0.042
_
RAYCHEM
EPD6314
TWINAX
-29
-201
0.136
0.025
77
RAYCHEM
EPD647100-01
COAX
-6B
TOO LARGE
0.433
0.088
50
RAYCHEM
EPD7246Q
COAX
-6A
TOO LARGE
0.406
0.048
75
RAYCHEM
EPD76761
TWINAX
_
-212
0.177
0.024
77
RAYCHEM
EPD8274-1
TRIAX
-13
TOO LARGE
0.314
_
_
RAYCHEM
M27500-22ML2TO8
TWINAX
-45
-204
0.134
0.028
_
RAYCHEM
M27500-22RC2S06
TWINAX
*
-217
0.145
0.025
_
RAYCHEM
M27500-26RC2S06
TWINAX
-47
-223
0.110
0.019
_
RAYCHEM
M27500-26RC2S09
TWINAX
-27
_
0.110
0.018
_
RAYCHEM
URM54
TRIAX
-13
_
0.327
0.023
_
SEIMENS
2YCYCY 0.63/3.7-75
TRIAX
-13A
TOO LARGE
0.307
0.025
75
SUHNER
G 04233 D-10
COAX
-2B
*
0.256
0.023
75
SUHNER
G01330HT
TRIAX
-56
_
0.177
0.016
_
SUHNER
G02262
COAX
-5
-003
0.110
0.019
_
SUHNER
G02332
TRIAX
-26
_
0.167
0.035
_
SUHNER
G02333
TRIAX
-59
_
0.169
0.010
_
SUHNER
G03233D
COAX
-3
_
0.212
0.017
_
SUHNER
GX03272D-06
COAX
-3
-012
0.213
0.035
_
SUHNER
S02223
COAX
_
-004
0.100
0.04
75
SUHNER
S04233
COAX
-2B
-014
0.243
0.034
75
SUMIRE
4C-HEB-NL
COAX
_
-25
0.236
0.035
75
SUMITOMO
2.5C
COAX
-22
-008
0.154
0.015
_
SUMITOMO
2C
COAX
*
-008
0.147
0.012
_
SUPERIOR
FVP224
TWINAX
-9
-214
0.242
0.021
_
SUPERIOR ESSEX
SERIES 11
COAX
-6A
-052
0.400
0.060
75
TENSOLITE
8712812
TWINAX
-47
-201
_
_
_
TENSOLITE
10047-9219-01
TRIAX
-32
-302
0.166
0.031
_
TENSOLITE
1936-TX-10C2SW
TWINAX
-47
-201
0.129
0.024
_
TENSOLITE
24453/42810 Q-2
QUADRAX
-58
-217
0.145
0.025
_
TENSOLITE
24499/898X2
TWINAX
-24
-204
0.125
0.025
_
TENSOLITE
26433/9P175T-2
TWINAX
-27
-205
0.090
0.019
_
TENSOLITE
26840/9D099LV-2
TWINAX
*
-223
0.110
0.019
_
TENSOLITE
28883/31169Q-1
TRAIX
-23
_
0.135
0.015
75
TENSOLITE
28883/T290TX-1
TRIAX
-23
_
0.135
0.015
75
TENSOLITE
30852/9B2581V-1
28GA
COAX
-5A
-001
0.079
0.010
_
TENSOLITE
30880/4119X-1
COAX
-44
*
0.073
0.011
_
Note: * = Special contact customer service
For a complete listing please refer to the online catalog.
Cable Group Table
CABLE MANUFACTURER
CABLE NUMBER
CABLE TYPE
WRENCH STYLE
CRIMP STYLE
JACKET SIZE
CONDUCTOR
IMPEDANCE
TENSOLITE
30895/25L-1
TRIAX
60
_
_
_
_
TENSOLITE
5M2397-002
TRIAX
-23
-303
0.136
0.014
_
TENSOLITE
S280W502
TWINAX
-24
-218
0.154
0.023
_
TENSOLITE
ST5M1284-001
TWINAX
*
-212
0.180
0.024
96
TENSOLITE
STME637-2
TWINAX
_
-206
_
_
_
TEXAS INSTRUMENTS
417889-2
TRIAX
*
-307
0.185
0.012
93
TEXAS INSTRUMENTS
802857-1
TWINAX
-24
*
0.162
0.031
70
THERMATICS
11079
TWINAX
-29
-204
0.130
0.025
_
THERMATICS
11421
TWINAX
_
-223
0.104
0.019
_
THERMATICS
11421
TWINAX
_
-223
_
_
_
THERMATICS
425-1680-030VW-1
COAX
_
-013
_
_
_
THERMATICS
5M2022-003
TWINAX
*
-204
0.130
0.024
_
THERMATICS
8712812 (A/F DWG)
TWINAX
-47
-201
0.125
0.023
_
THERMATICS
NEC725-2(G)
COAX
53
_
_
_
_
THERMAX
68-1938TF(2)SXE
TWINAX
_
-223
0.104
0.019
_
THERMAX
77-1936TF(2)TFPA
TWINAX
-47
-201
0.125
0.024
77
THERMAX
983-495
COAX
-4
*
0.144
0.024
75
THERMAX
985-495
COAX
-4
*
0.144
0.024
75
THERMAX
M27500-22TG2T14
TWINAX
-29
_
0.132
0.031
_
THERMAX
RG58/BLACK
COAX
-1
-011
_
_
50
THERMAX
RGS-316
COAX
-5
-003
0.102
0.020
50
THERMAX
RGS-316
COAX
-5
-003
0.102
0.020
50
TIMES
2382
COAX
-6A
_
0.400
0.064
75
TIMES
2391
COAX
-41
-020
0.273
0.041
75
TIMES
2560
COAX
-41
_
0.271
0.040
_
TIMES
8712812
TWINAX
-47
-201
_
_
_
TIMES
100A
COAX
-5
-003
0.105
0.018
50
TIMES
2260V
COAX
-6
*
0.296
0.040
75
TIMES
2360V
COAX
-41
-020
0.273
0.040
75
TIMES
25B3M
COAX
-2
-014
0.242
0.031
_
TIMES
65555-RD316
COAX
-5
-003
0.113
0.021
_
TIMES
AA-2317
TRIAX
-24A
*
0.169
0.025
50
TIMES
AA-2325
TRIAX
*
-308
0.215
0.020
95
TIMES
AA-2511
COAX
-2A
_
0.220
0.020
_
TROMPETER
TWCH-78-1
TWINAX
-29
-202
0.155
0.022
78
TROMPETER
TWCH-78-2
TWINAX
-9
-213
0.247
0.037
78
TROMPETER
TWCN-124-1A
TWINAX
-29
-203
_
_
_
TROMPETER
TWCP-124-2
TWINAX
-9
-214
0.250
0.024
124
TROMPETER
TWCP-124-3
TWINAX
-55
-224
0.215
0.024
124
TROMPETER
TWCP-124-5
TWINAX
*
-226 (70MC)
0.335
0.048
124
TROMPETER
TWCP-78-1
TWINAX
-47
_
0.155
0.019
78
TROMPETER
TWCP-78-2
TWINAX
-9
-213
0.247
0.037
78
APPENDIX
Note: * = Special contact customer service
For a complete listing please refer to the online catalog.
91
Notes
92
Index
Part Number
Page Part Number
AD1(W)................................................. 47
(U)AD48................................................ 33
(U)AD95................................................ 38
AD131................................................... 39
AD1300................................................. 39
ADAPTERS............................................. 58
ADAPTER TABLE................................ 58-61
AD1WHD............................................... 47
ADH1(W)............................................... 47
ADM1.................................................... 50
ADM2.................................................... 50
(U)AD228.............................................. 27
(U)AD48................................................. 33
AD78 (TL/FL)............................................ 6
(U)AD95................................................ 38
AD158(FL).............................................. 20
(U)ADI95................................................ 38
AD378...................................................... 6
AD3158.................................................. 20
ADMW12............................................... 47
ADRMF70(TL/FL)..................................... 6
ADRMF370.............................................. 6
(U)ADRMF220........................................ 27
APPENDIX......................................... 66-91
BCS/C24T3D.......................................... 62
BCS/C24T3W.......................................... 62
(U)BJ20.................................................. 28
(U)BJ20SL............................................... 28
(U)BJ21.................................................. 28
(U)BJ23.................................................. 28
(U)BJ24.................................................. 28
(U)BJ26.................................................. 28
(U)BJ27.................................................. 28
(U)BJ28.................................................. 28
(U)BJ29.................................................. 28
BJ30....................................................... 25
BJ31....................................................... 25
BJ38 ...................................................... 25
BJ39....................................................... 25
(U)BJ40.................................................. 34
(U)BJ41.................................................. 34
(U)BJ46.................................................. 34
(U)BJ47.................................................. 34
(U)BJ48.................................................. 33
(U)BJ49................................................... 34
BJ50........................................................ 42
BJ57........................................................ 42
BJ58....................................................... 42
BJ59........................................................ 42
BJ72(TL/FL) .............................................. 7
BJ73HS................................................... 16
BJ73(TL/FL)............................................... 7
BJ74(TL/FL)............................................... 7
BJ74C....................................................... 7
BJ74C(TL/FL)............................................. 7
BJ75(TL/FL)............................................... 7
BJ76(TL/FL)............................................... 7
BJ77(TL/FL) .............................................. 7
BJ77HS................................................... 16
BJ78(TL/FL)............................................... 7
BJ78HS................................................... 16
BJ79(TL/FL)............................................... 7
Page Part Number
BJ79C(TL/FL)............................................. 7
BJ79HS................................................... 16
BJ80....................................................... 24
BJ88....................................................... 24
BJ89....................................................... 24
BJ89F...................................................... 24
(U)BJ95................................................... 38
(U)BJ98-2............................................... 38
(U)BJ120................................................ 35
(U)BJ120SL............................................. 35
BJ150(FL).................................................19
BJ152(FL).................................................19
BJ153(FL).................................................19
BJ154AC(FL)............................................ 19
BJ157(FL).................................................19
BJ157F(FL)...............................................19
BJ157FLHS...............................................16
BJ157HS.................................................. 16
BJ158(FL)................................................ 19
BJ159..................................................... 18
BJ159AC................................................. 18
BJ159ACFL.............................................. 18
BJ159FL.................................................. 18
(U)BJ220................................................. 27
(U)BJ224................................................. 28
(U)BJ224-RIA.......................................... 28
(U) BJ227................................................ 28
(U)BJ228................................................. 28
BJ249..................................................... 34
BJ3459AC (P/S)....................................... 23
BJ372........................................................ 7
BJ373........................................................ 7
BJ73HS.................................................... 16
BJ374........................................................ 7
BJ374C..................................................... 7
BJ375....................................................... 7
BJ376....................................................... 7
BJ376HS................................................. 16
BJ377........................................................ 7
BJ378....................................................... 7
BJ378HS................................................. 16
BJ379....................................................... 7
BJ379C..................................................... 7
BJ380...................................................... 24
BJ388...................................................... 24
BJ389(F)................................................. 24
BJ450P(P/S)............................................ 22
BJ450R(P/S)............................................ 22
BJ450W(P/S)........................................... 22
BJ450FL(P/S)........................................... 22
BJ457P(P/S)............................................ 22
BJ457R(P/S)............................................ 22
BJ457W(P/S)........................................... 22
BJ457FL(P/S)........................................... 22
BJ459ACFL(P/S)...................................... 23
BJ459ACP (P/S)....................................... 23
BJ459ACR (P/S)....................................... 23
BJ459ACW (P/S)...................................... 23
BJ770(GL)................................................. 7
BJ803..................................................... 24
BJ833..................................................... 24
BJ88....................................................... 24
Page
BJ883...................................................... 24
BJ893...................................................... 24
BJ893F..................................................... 24
BJ3150.................................................... 19
BJ3150HS................................................ 16
BJ3150SHS.............................................. 16
BJ3152.................................................... 19
BJ3153.................................................... 19
BJ3154AC............................................... 19
BJ3157................................................... 19
BJ3157F.................................................. 19
BJ3158.................................................... 19
BJ3159................................................... 18
BJ3159AC............................................... 18
BJ3450.................................................... 22
BJ3457.................................................... 22
BJ3459AC(P/S)........................................ 23
(U)BN23................................................. 27
BN73(TL/FL)............................................. 9
BN83...................................................... 24
BN153(FL).............................................. 20
BN373..................................................... 9
BN383.................................................... 24
BN833................................................... 24
BN3153................................................. 20
BNC Coax Connector.............................. 26
BNC Coax Tester..................................... 64
BNC TOOL/WRENCH CRIMP ASSEMBLY
ILLUSTRATIONS...................................... 72
CABLE ASSEMBLY TESTER....................... 64
CABLE CUTTING TOOL............................ 62
CABLE DISTRIBUTION PANELS................. 52
CABLE GROUP TABLE.......................... 74-91
CABLE STRIPPERS................................... 62
CBBJ26................................................... 31
(U)CBBJ29.............................................. 31
CBBJ74..................................................... 8
CBBJ79..................................................... 8
CBBJ79 (TL/FL).......................................... 8
CBBJ379................................................... 8
(U)CBBJR26(RC)...................................... 31
(U)CBBJR29(RC)...................................... 31
CBBJR39A............................................... 25
(U)CBBJR46(A)........................................ 34
(U)CBBJR49............................................ 34
CBBJR74................................................... 8
CBBJR74 (TL/FL)....................................... 8
CBBJR79................................................... 8
CBBJR79 (TL/FL)........................................ 8
CBBJR159................................................ 20
CBBJR374................................................. 8
CBBJR379................................................. 8
(U)CBJR20A............................................ 30
(U)CBJR220............................................ 30
CBJ157(FL)............................................. 20
CBJ20..................................................... 30
CBJ22..................................................... 30
CBJ70(TL/FL)............................................. 8
CBJ70A..................................................... 8
CBJ370..................................................... 8
CBJ3157................................................. 20
CBJE130-1, -2, -3.................................... 39
93
INDEX
Index
Part Number
Page Part Number
CBJR12.................................................... 31
CBJR157 (FL)........................................... 20
CBJR3157............................................... 20
CBJR70(A)................................................. 8
(U)CJ20................................................... 27
(U)CJ40.................................................. 33
(U)CJ50.................................................. 42
CJ50FL.................................................... 42
CJ70(TL/FL).............................................. 6
CJ70C(TL/FL)........................................... 6
CJ80....................................................... 24
CJ150..................................................... 18
CJ150AC................................................ 18
CJ150ACFL............................................. 18
CJ150FL...................................................18
(U)CJ220................................................. 27
(U)CJ240................................................. 33
CJ350...................................................... 42
CJ370........................................................ 6
CJ370C..................................................... 6
CJ380...................................................... 24
CJ450ACP(P/S)....................................... 23
CJ450ACR(P/S)....................................... 23
CJ450ACW(P/S)...................................... 23
CJ450ACFL(P/S)...................................... 23
CJ803..................................................... 24
CJ3150.................................................... 18
CJ3150AC............................................... 18
CJ3450AC(P/S)....................................... 23
COAX 20/220 SERIES......................... 30-31
COAX PATCH JACKS................................ 45
COAX RFI CAPS & TERMINATIONS........... 57
CONCENTRIC TWINAX 450 SERIES..... 22-23
CONNECTOR COMPATABILITY TABLES... 69-70
CRIMP TOOLS......................................... 63
CT5........................................................ 63
CUSTOM CABLE ASSEMBLIES.................. 56
D HOLES................................................. 54
DIN CONNECTORS............................ 36-37
DISTRIBUTION PANELS........................... 52
F CONNECTORS................................. 39-40
HDVDP/HDVDPM SERIES........................ 43
HDVDPT................................................. 43
HDVDP................................................... 43
HDVDPMT.............................................. 43
HDVDPM................................................ 43
HDVDPMN............................................. 44
HDVDPN................................................ 43
HERMETICALLY SEALED CONNECTORS... 16
HIGH FREQUENCY VIDEO PATCHING...... 44
HP250.................................................... 51
HP304.................................................... 51
HP375.................................................... 51
HP500.................................................... 51
IMPEDANCE MATCHING ADAPTER.......... 59
J3D(WD)................................................. 46
J3E(WE).................................................. 46
J3(W)...................................................... 46
J5(W)...................................................... 46
J8(FL)...................................................... 50
J8D......................................................... 50
J9............................................................ 46
94
Page Part Number
J11MW................................................... 48
J11MWL................................................. 48
J11D....................................................... 48
J12.......................................................... 48
J13-R...................................................... 46
J13H-R................................................... 46
J13W-R................................................... 46
J13WH-R................................................ 46
J24WMSTHF-75..................................... 45
J72.......................................................... 11
J72D....................................................... 11
J72L........................................................ 12
J72S........................................................ 11
J74-2T-R.................................................. 13
J74MST-R................................................ 13
J74T-R..................................................... 13
J94.......................................................... 41
(U)J95..................................................... 38
J150........................................................ 14
J152(FL).................................................. 14
J158........................................................ 14
J308........................................................ 50
J74 SERIES............................................... 13
JSISM-120............................................... 12
LOW VSWR CONNECTORS...................... 41
LPH-50................................................... 41
LPLTR-50................................................. 15
LPLTR-75................................................. 15
LPLTRA-50.............................................. 15
LPLTRA-75.............................................. 15
LPLTRAL-50............................................. 15
LPLTRAL-75............................................. 15
LPLTW-124............................................. 15
LPLTW2TP-124....................................... 15
LPLTW2TP-78......................................... 15
LPLTW-78............................................... 15
LPLTWA-124........................................... 15
LPLTWA-78............................................. 15
LPLTWAL-124.......................................... 15
LPLTWAL-78............................................ 15
LPM-50................................................... 50
LPM-75................................................... 50
LPTR-50.................................................. 15
LPTR-75.................................................. 15
LPTRA-50................................................ 15
LPTRA-75................................................ 15
LPTRAL-50.............................................. 15
LPTRAL-75.............................................. 15
LPTRL....................................................... 2
LPTRL-50................................................ 15
LPTRL-75................................................ 15
LPTW-124.............................................. 15
LPTW2TP-78.......................................... 15
LPTW2TP-124........................................ 15
LPTW2TPL-78......................................... 15
LPTW2TPL-124....................................... 15
LPTW-78................................................ 15
LPTWA-124............................................ 15
LPTWA-78.............................................. 15
LPTWAL-124........................................... 15
LPTWAL-78............................................. 15
LPTWL-124............................................. 15
Page
LPTWL-78............................................... 15
M22520/5-01......................................... 63
M22520/5-01/CD5#............................... 63
MIL-C-49142 QPL...................................... 5
MINIATURE COAX 20/220 SERIES....... 27-31
MINIATURE COAX 250 SERIES................. 32
MINI WECO COAX CIRCUIT BOARDS JACKS.. 31
MINI-WECO COAX PATCH JACKS............. 48
MINI-WECO COAX PATCH PLUGS............ 47
MINIATURE COAX THREADED
40-240 SERIES................................... 33-34
MINIATURE PATCHING & CABLE
ASSEMBLIES....................................... 11,12
MINIATURE NORMAL-THRU
PATCH JACKS.......................................... 13
N CONNECTORS..................................... 38
PATCH PLUGS......................................... 49
PATCHING PRODUCTS....................... 45-60
PCHY-L-50.............................................. 41
PCH-L-50................................................ 41
PC-L-Z..................................................... 55
PCM-L-50................................................ 50
PCM-L-75................................................ 50
PCMW-L-Z.............................................. 55
PCMX-L-50............................................. 50
(U)PCPX-L-Z........................................... 55
(U)PCPWX-L-Z........................................ 55
PCW-L-Z................................................. 55
(U)PCWX-L-Z.......................................... 55
(U)PCX-L-Z............................................. 55
(U)PCYC-L-Z............................................ 55
(U)PCY-L-Z.............................................. 55
PHENOLIC PANELS............................ 51-53
PL1C....................................................... 47
PL1MW................................................... 48
PL1MWLT................................................ 48
PL1WC................................................... 47
PL11C.................................................... 47
PL11SC.................................................. 47
PL11SCLT............................................... 47
(U)PL20.................................................. 27
(U)PL21.................................................. 27
PL30....................................................... 25
(U)PL40.................................................. 33
PL50....................................................... 42
PL50C..................................................... 42
PL71....................................................... 11
PL71L..................................................... 12
PL73......................................................... 6
PL73C...................................................... 6
PL74........................................................ 6
PL74C...................................................... 6
PL74MC(FL)............................................. 6
PL75(FL)................................................... 6
PL75C...................................................... 6
PL75CFL................................................... 6
PL75MC................................................... 6
PL80....................................................... 24
PL93....................................................... 41
PL94....................................................... 41
(U)PL95.................................................. 38
(U)PL121................................................ 35
Index
Part Number
Page Part Number
(U)PL121SL............................................ 35
(U)PL122................................................ 35
(U)PL123................................................ 35
PL130C................................................... 39
PL130SC................................................. 39
PL150.................................................10,14
PL153..................................................... 20
PL153AC................................................ 20
PL155..................................................... 18
PL155AC................................................ 18
PL155ACFL............................................. 18
PL155FL.................................................. 18
(U)PL220................................................ 27
(U)PL223................................................ 35
(U)PL240................................................ 33
(U)PL250................................................ 32
PL375....................................................... 6
PL375C..................................................... 6
PL375MC................................................. 6
PL380..................................................... 24
PL803..................................................... 24
PL3155................................................... 18
PL3155AC.............................................. 18
PL3455AC.............................................. 23
PL455ACP(P/S)....................................... 23
PL455ACR(P/S)....................................... 23
PL455ACW(P/S)..................................... 23
PL4455ACF(P/S)..................................... 23
PLR74C.................................................... 6
PLR75C.................................................... 6
PLR75CFL................................................. 6
PLR130SC............................................... 40
PLR155AC............................................... 18
PLR155ACFL ........................................... 18
(U)PLR220.............................................. 27
PLR375C................................................... 6
PLR455ACP(P/S)..................................... 22
PLR455ACR(P/S)..................................... 22
PLR455ACW(P/S).................................... 22
PLR455ACFL(P/S).................................... 22
PLR3155AC............................................. 18
PLR3455AC(P/S)..................................... 22
PN2........................................................ 45
PN2A...................................................... 45
PN2C...................................................... 45
PTR-L-W.................................................. 11
PTRM-L-Z................................................ 14
PTRMX-L-Z.............................................. 14
PTRMY-L-Z.............................................. 14
PTRS-L-Z................................................. 11
PTRX-L-Z................................................. 11
PTRYL-L-Z................................................ 12
PTRY-L-Z................................................. 11
PTW-L-Z................................................. 11
PTWM-L-Z.............................................. 14
PTWMX-L-Z............................................ 14
PTWMY-L-Z............................................ 14
PTWS-L-Z............................................... 11
PTWX-L-Z............................................... 11
PTWYL-L-Z.............................................. 12
PTWY-L-Z............................................... 11
PUSH-ON COAX 120 SERIES................... 35
Page Part Number
RFI CAPS & TERMINATIONS................10, 57
RFI 150-1................................................ 14
RFI 70-1.................................................. 11
RFI455(FL).............................................. 23
RFI3455.................................................. 23
RFI457(FL).............................................. 22
RFI3457.................................................. 22
RFI457(FL).............................................. 22
RT1L....................................................... 65
RT1XL..................................................... 65
RT1S....................................................... 65
RT1SS..................................................... 65
RT4L....................................................... 65
RT4S....................................................... 65
RTC-4L.................................................... 65
RTR-1L.................................................... 65
RTR-1XL.................................................. 65
SERIES INSTRUCTIONS 450/3450 SERIES..... 21
SPC8P-201.............................................. 17
SPC8S-201.............................................. 17
ST1......................................................... 62
STANDARD 19” PANELS..................... 53-54
STANDARD COAX PATCH JACKS............. 50
STANDARD COAX PATCHING &
LOOPING PLUGS..................................... 49
STANDARD & MINI-WECO COAX
PATCH PLUGS......................................... 46
STANDARD PANEL SPECIFICATIONS........ 51
STANDARD THREADED.......................... 24
STANDARD TWINAX/TRIAX
LOOPING PLUGS..................................... 15
STC-F....................................................... 62
STC-W..................................................... 62
SUBMINIATURE 150/3150 SERIES........... 20
SUBMINIATURE BULKHEAD JACKS.......... 19
SUBMINIATURE JACKS & PLUGS.............. 18
SUBMINIATURE TWINAX/TRIAX
LOOPING PLUGS..................................... 15
SUBMINIATURE PATCHING...................... 14
TBJ451P.................................................. 22
TBJ451FLP.............................................. 22
TBJ451P.................................................. 22
TBJ451S.................................................. 22
TBJ451FLS.............................................. 22
TBJ3451(P/S).......................................... 22
TN2.......................................................... 9
TN2 (TL/FL).............................................. 9
TN2 (TL/FL) A........................................... 9
TN2A....................................................... 9
TN2T........................................................ 9
TNG2-R.................................................... 8
TNG3-R.................................................... 9
TNG451FL(P/S)....................................... 23
TNG451P(S)........................................... 23
TNG3451(P/S)........................................ 23
TNGM1-1-R........................................... 14
TNM3-Z................................................. 14
TOOLS & ACCESSORIES..................... 62-64
TOOL KIT & BULK PACKAGING................. 65
TPW-1-R................................................. 47
TPT-1-R.............................................. 11,47
TROMPETER CABLE SPECS................. 66-67
Page
TWINAX/TRIAX CABLE ASSEMBLY
TESTER....................................................64
TWINAX/TRIAX CONNECTORS
70/370 SERIES....................................... 5-8
TWINAX/TRIAX CONNECTORS
150/3150 SERIES............................... 17-20
TWINAX/TRIAX CONNECTORS 450/3450
SERIES............................................... 21-23
TWINAX/TRIAX CONNECTORS 80/380
SERIES.............................................. 21, 24
TWINAX/TRIAX CONNECTORS 30
SERIES.............................................. 21, 25
TWINAX/TRIAX CONNECTORS/
MINIATURE PATCHING............................ 12
TWINAX/TRIAX CONNECTORS
SPECIFICATIONS.................................... 2,3
TWINAX/TRIAX:PLENUM/HALOGEN
FREE CABLE SPECS.................................. 68
TWO-PIN POLARIZED 30 SERIES,
TWBNC/TWTNC..................................... 25
UADF20M110........................................ 37
UADF1023M95....................................... 36
UADM20F110........................................ 37
UBJ110................................................... 37
UBJ1023................................................. 36
UCBJ20F................................................ 30
UCBJ29.................................................. 31
UCBJ223................................................ 30
UCBJ250(N/G)........................................ 32
UCBJE20-1.............................................. 29
UCBJE20-2.............................................. 29
UCBBJE20-1............................................ 29
UCBBJE20-2............................................ 29
UCBBJE20-3............................................ 29
UCBBJE20-4............................................ 29
UCBBJ1023............................................. 36
UCBJR250(N/G)...................................... 32
UJ9W...................................................... 46
UPL110................................................... 37
UPL250................................................... 32
UPL1023................................................. 36
UPLR1023............................................... 36
75 OHM MINI-WECO COAX
PATCH JACKS.......................................... 48
010-0097............................................... 63
010-0088............................................... 63
010-0123............................................... 64
010-0133............................................... 64
010-0208............................................... 64
105-1496............................................... 37
155-0830-1............................................ 12
305-0138................................................. 9
700-0024............................................... 62
95
96
TERMS & CONDITIONS
97
TERMS & CONDITIONS
About Emerson Network Power
Connectivity Solutions
Emerson Network Power
Connectivity Solutions
US Headquarters
3000 Lakeside Drive, Ste. 308N
Bannockburn, IL 60015, USA
Emerson Network Power Connectivity Solutions, an
Emerson business, serves the needs of wireless
communications, military, telephony and data networks,
CATV security systems, health care, military and industrial
facilities with a full spectrum of RF/microwave and fiber
optic connectivity products. For more information, visit
www.EmersonConnectivity.com
North America
299 Johnson Avenue, Ste. 100
Waseca, MN 56093, USA
Toll Free: 800.247.8256
Tel: 507.833.8822
Fax: 507.833.6287
[email protected]
About Emerson
Europe, Middle East, Africa
Emerson Network Power Connectivity Solutions, Ltd.
7-13 Russell Way
Widford Industrial Estate
Chelmsford, Essex CM1 3AA
Tel: +44 1245.359.515
Fax: +44 1245.358.938
[email protected]
Asia Pacific
Emerson Network Power Connectivity Solutions
(Shanghai) Co., Ltd.
Building 1, No. 800 ShenFu Road
XinZhliang Industry Park
Shanghai, China 201108
Tel: +86 21.5442.7668
Fax: +86 21.5442.7628
[email protected]
Emerson (NYSE: EMR), based in St. Louis, is a global leader
in bringing technology and engineering together to
provide innovative solutions to customers through its
network power, process management, industrial automation, climate technologies, and appliance and tools businesses. For more information, visit www.Emerson.com
www.EmersonNetworkPower.com/Connectivity
www.EmersonConnectivity.com
Emerson Network Power
The global leader in enabling business-critical continuity.
AC Power Systems
Connectivity
DC Power Systems
Embedded Power
Inbound Power
Integrated Cabinet
Outside Plant
Precision Cooling
Site Monitoring and Services
Emerson Network Power and the Emerson Network Power logo are trademarks and service marks of Emerson Electric Co. ©2010 Emerson Electric Co. TEI-T24, Rev. 03/12