DG17 sub-miniature pcb automotive relay • 15A continuous current capacity • AgSnOInO contacts for motor & lamp loads • open, dust cover and sealed versions • Automotive oriented design RoHS Compliant Contacts Contact number & arrangement SPST-NO (1 Form A); SPDT (1 Form C); SPST-NO-DM (1 Form U); SPDT-DB-DM (1 Form W) Contact material AgNi0.15; AgNi90/10; AgSnOInO; AgCdO Max. switching voltage DC Current dependent - see Fig 3 Min. switching current / voltage 0.1A/5VDC (AgNi0.15), 0.5A/5VDC (AgSnOInO) 1 Form C 1 Form A Max. continuous current DC1 Max. switching current Make 15A 60A NC 10A 60A (100A AgSnOInO) (100A AgSnOInO) 20A 20A Break Initial resistance NO 15A 12A 10A 1 Form U 2 x 10A 2 x 40A See coil table 1 See coil table 1 Rated power consumption 2 x 15A DC 1.1W approx. Insulation Insulation resistance Dielectric strength 100MΩ at 500VDC, 50%RH coil to contact 500Vrms, 1 min. General Data Operating time (typical) mS 3 Release time (typical) mS 1.5 Electrical Life ops 2 x 105 (see Note 2) Mechanical life ops 1 x 107 Dimensions Weight L x W x H 17.7 x 15.2 x 19.7 (covered - excluding terminals) open: 8g / covered: 12g approx. Ambient temperature storage -40 to 155°C operating -40 to 85°C (higher to special order) Shock resistance Functional: 10g 11mS; Destructive: 100g Vibration resistance Functional: NO 20g; NC 10g 10-200Hz Drop resistance 1M height drop on concrete in final enclosure Page 1 of 3 Ref: DG17 121713JHM www.aecsensors.com Sales Department Tel: (888) 847-6552 2 x 30A 2 x 20A DC 6, 12, 24V Operating range of supply voltage NC 2 x 5A (50A AgSnOInO) 100mΩ, max. at 0.1A/6VDC Must release voltage NO 2 x 7A (70A AgSnOInO) Coil Rated voltage 1 Form W 2 x 5A 2 x 5A DG17 sub-miniature pcb automotive relay Coil Data Table 1 Coil Voltage Code Nominal Voltage (VDC) Coil Resistance (Ω) ±10% 1006 6 28 1012 12 130 1024 24 520 Must Operate Voltage Max. (VDC) Must release voltage min. (VDC) 1 Form A/C/U 1 Form W Allowable Voltage (VDC)* 3.75 4.5 8 0.7 7.50 9.0 16 1.4 15.00 18.0 31 2.8 1 Form A/C/U/W * At ambient temperature of 85’C, maximum allowable voltage should be reduced to 72% Ordering codes Contact material Type D G 1 7 Contact arrangement - Cover protection and mounting - 5 Coil code - - Contact material 10 - AgCdO 20 - AgNi (90/10) 70 - AgSnOInO 80 - AgNi 0.15 See coil table 1 Contact arrangement 11 - SPDT (1 C/O, 1 Form C) 21 - SPST-NO (1N/O, 1 Form A) 8U - SPST-NO-DM (1 Form U) 8W - SPDT-DB-DM (1 Form W) Cover protection category 1 - no cover, IP00 3 - in cover, sealed - IP67 7 - in cover, dust cover - IP54 Connection mode 5 - for PCB Coil Options Nil - No options F - UL Class F insulation for high ambient temperatures H - UL Class H insulation for high ambient temperatures Page 2 of 3 Ref: DG17 121713JHM www.aecsensors.com Sales Department Tel: (888) 847-6552 Options DG17 sub-miniature pcb automotive relay Overall Dimensions Fig. 1 Open Frame Covered Dimensions in mm PCB Mounting Dimensions (Bottom View) Wiring Diagrams Fig. 2 Reference Curves 1 Form A (SPST-NO) 1 Form C (SPDT) 1 Form U (SPST-NO-DM) 1 Form W (SPDT-DB-DM) Wiring Diagrams (Bottom View) Notes: 1: All parameters, unless otherwise specified, are measured at ambient temperature of 23ºC. 2: Electrical life obtained at resistive or inductive load at 10A, 15VDC for 1 Form A/C/U/ and 7A, 15VDC for 1 Form W, with suitable arc suppression circuit attached and with operating frequency of 1 op/sec. 3: Maximum make current refers to lamp load inrush current. 4: For optimum electrical life, please remove the knock off nib of the sealed version after cleaning process. Specifications are subject to change without notice. E&OE. Page 3 of 3 Ref: DG17 121713JHM American Electronic Components Inc., 1101 Lafayette St. Elkhart, IN46516 www.aecsensors.com Sales Department Tel: (888) 847-6552 Fig. 3