Voice: 800.729.2099 Fax: 678.560.9304 ICE Components, Inc. [email protected] www.icecomponents.com Gate Drive Transformer GTO2 Series Features Applications • Low Profile - 3mm • Gate Drive Transformer • Designed for Frequencies from 75 kHz to over 1 MHz • AC/DC and DC/DC Converters • Suiteable for Pick and Place applications • Pulse/Signal Transformers Packaging: Reel diameter: 13”, Reel width: 16 mm, Pieces/reel: 1500 Mechanical Recommended PCB Layout Dot for pin 1 1.27 1 6 2 6.8 5 max XXX-XXX YYWW 3 0.76 3.0 max 1 6 2 5 3 4 1.52 4 Schematic N1 1 N2 6 N1 1 N2 3 N3 5 3 4 2 4 6 2.54 (X4) 5.71 8.6 max Top View units: mm Electrical Specifications Part Number Turns Ratio Inductance1 DCR2 Lkg. Ind. E-T Prod5 Hi-Pot Schematic N1:N2:N3 (µH, min.) (mΩ, max.) (µH, max.) (V-µs) (Vdc) GT02-110-006 1:1 135 225:225 0.2 6.9 1500 A GT02-110-010 1:1 290.4 320:320 0.2 10.2 1500 A GT02-110-019 1:1 785 600:520 0.36 19.4 1500 A GT02-120-006 1:2.5 21.6 110:320 0.1 6.9 1500 A GT02-120-014 1:2.5 86.4 190:410 0.15 13.8 1500 A GT02-111-006 1:1:1 135 230:230 0.1 6.9 1500 B GT02-122-006 1:2.5:2.5 21.6 110:230 0.1 6.9 1500 B GT02-122-008 1:2:2 48.6 160:260 0.15 8.3 1500 B Specifications subject to change without notice. 1. Tested at 100kHz, 0.1Vrms. 2. Electrical specifications at 25ºC. 3. Operating range: -40 ºC to +130 ºC. 4. Meets UL 94V-0. 5. E-T product rating is for secondary (gate) windings and is based upon a flux density of 2200 Gaussat 25 ºC in a bipolar drive application. (05/07) GT02-1