Keysight E36103A Programmable dc power supply Datasheet

Keysight Technologies
E36100 Series
Programmable DC Power Supplies
Data Sheet
02 | Keysight | E36100 Series Programmable DC Power Supplies - Data Sheet
Power Forward
A
Designs change—and so should your DC power supply. Meet the
E36100, engineered by Keysight to power your designs safely and
quietly during manual tests or automated sequences. From every
angle — size, display, and I/O — the E36100 will impress you.
Add one to your bench and power forward.
C
B
D
–– Choose the best model for your needs: five models offer up to
5 A or 100 V
–– Save space on your bench, 2U ¼-form factor
–– Connect for computer control with standard LAN (LXI Core)
and USB connectivity
–– Perform manual tasks quickly with the intuitive on-screen
menu system
–– Easily view the high-contrast OLED display from anywhere
on your bench, even from a sharp angle
–– Protect your device under test (DUT) with overvoltage and
over-current detection
–– Power your DUT with confidence through excellent accuracy
in programming and readback
–– Quiet operation
E
F
I
J
H
G
K
A
Tough carrying handle
B
Information-packed, high-contrast OLED display; easily viewable
even from sharp angles
C
Rotary knob for quick and easy configuration
Accurate, Reliable Power
D
Fast voltage/current setting and front-panel electronic calibration
E
Menu key opens intuitive user interface
The E36100 Series is the latest addition to Keysight’s industry
standard family of bench power supplies, backed with Keysight’s
standard 3-year warranty.
F
Front-panel lock prevents accidental changes during tests
G
Output enable/disable switch to protect your DUT quickly
H
Dual-position power switch
I
Sense terminals
J
Output terminals
K
Earth ground reference point
Power your DUT with excellent voltage and current programming
and readback accuracy. Use the power supply’s highly accurate
low-current measurement feature for demanding measurements.
Protect your DUT with built-in overvoltage and overcurrent
protection, and count on the built-in overtemperature protection
to keep your power supply safe.
Excellent Front-Panel Usability
The clean design of the E36100 Series front-panel lets you
become productive with the unit very quickly. The easy-to-use
rotary knob and keypad interface allows you to set the output
at your desired resolution quickly and easily, with digit-by-digit
control. You can store and recall up to 10 complete power supply
setups from non-volatile memory in order to quickly change
instrument states. The output on/off key quickly turns the output
on and off.
Fast, Industry-Standard Programming
Every E36100 Series model ships standard with both LAN (LXI
Core) and USB (TMC488). The easy-to-use SCPI (Standard
Commands for Programmable Instruments) programming
language lets you create fast and simple programs with transient
response faster than 50 μs and fast command processing time–
less than 10 ms. You can also program the instrument with the
power supply’s Interchangeable Virtual Instruments (IVI) driver.
Use the Keysight IO Libraries Suite (www.keysight.com/find/iosuite)
to accelerate your programming. The IO Libraries’ instrumentcentric view and auto-discovery of instruments get you connected
to your instrument quickly
03 | Keysight | E36100 Series Programmable DC Power Supplies - Data Sheet
Simple, Powerful Soft Front Panel
Easy Power and I/O Connection
When you cannot be near your DUT, open your browser and control
the instrument via the power supply’s bullt-in Web interface, with
a look and feel that replicates the front-panel experience.
Connect for computer control with standard LAN (LXI Core)
and USB connectivity. Use the security slot to keep the supply
on your bench.
BenchVue Control and Visualization
Do you need to convert the power supply for different mains
power? The two switches on the bottom of the instrument
make it straightforward. See the product manual for details.
BenchVue software for the PC makes it simple to connect,
control, and view Keysight power supplies simultaneously with
other Keysight bench instruments without programming.
–– Visualize the outputs of multiple power supplies
simultaneously
–– Log data, capture screen shots, and save a system state
–– Recall a past state of your bench to replicate results
–– Export measurement data in desired format fast
–– Quickly access manuals, drivers, FAQs and videos
–– Monitor and control bench from mobile devices
The power supply app within BenchVue lets you control power
supplies, visualize voltage and current output, log data, and
annotate captured data (included in BV0000A, available as a free
download at www.keysight.com/find/BenchVue). Upgrade to the
Pro version (BV0003A) for unrestricted data logging with limit
checking and status alerts. Use the companion BenchVue Mobile
app to monitor and respond to long-running tests from anywhere.
Option J01 recessed binding posts
04 | Keysight | E36100 Series Programmable DC Power Supplies - Data Sheet
Performance Specifications
Tolerance %
E36102A
E36103A
E36104A
E36105A
E36106A
Max. voltage
6V
20 V
35 V
60 V
100 V
Max. current
5A
2A
1A
0.6 A
0.4 A
DC output rating (0 to 40 °C)
Load regulation ± (% of output + offset)
Voltage
<0.01% +
2 mV
3 mV
6 mV
10 mV
20 mV
Current
<0.02% +
250 µA
100 µA
50 µA
30 µA
20 µA
Voltage
<0.01% +
1 mV
2 mV
4 mV
7 mV
12 mV
Current
<0.02% +
250 µA
100 µA
50 µA
30 µA
20 µA
RMS
350 µV
2 mV
4 mV
5 mV
15 mV
Pk-Pk
10 mV
30 mV
60 mV
100 mV
150 mV
Voltage
0.05% +
3 mV
8 mV
12 mV
20 mV
40 mV
Current
0.05% +
5 mA
1 mA
0.6 mA
0.4 mA
0.3 mA
Voltage
0.05% +
3 mV
5 mV
8 mV
12 mV
20 mV
Current
0.05% +
4 mA
1 mA
0.5 mA
0.3 mA
0.2 mA
0.25% +
40 µA
(0-20 mA)
40 µA
(0-8 mA)
40 µA
(0-4 mA)
40 µA
(0-3 mA)
40 µA
(0-2 mA)
Line regulation ± (% of output + offset)
Output ripple and noise (20 Hz to 20 MHz)
Voltage
Accuracy 12 months (23 °C ± 5 °C)
Programming accuracy ± (% of output + offset)
Readback accuracy ± (% of output + offset)
Small Current
Load transient recovery time
(Time to recover to within the settling band following a load change from 50% to 100% and from 100% to 50% of full load)
Voltage settling band
15 mV
50 mV
87.5 mV
150 mV
250 mV
Time
<50 μs
<50 μs
<50 μs
<50 μs
<50 μs
05 | Keysight | E36100 Series Programmable DC Power Supplies - Data Sheet
Typical Characteristics
E36102A
E36103A
E36104A
E36105A
E36106A
Voltage
360 µV
1.2 mV
2.1 mV
3.6 mV
6.0 mV
Current
300 µA
120 µA
60 µA
36 µA
24 µA
Voltage
240 µV
800 µV
1.4 mV
2.4 mV
4 mV
Current
200 µA
80 µA
40 µA
24 µA
16 µA
Resolution
Program (Average)
Readback
Small current
5 µA
960 nA
280 nA
180 nA
120 nA
Program (Meter)
Minimum perceivable change
Voltage
1 mV
1 mV
2 mV
3 mV
6 mV
Current
1 mA
1 mA
1 mA
1 mA
1 mA
Readback (Meter)
Voltage
1 mV
1 mV
1 mV
3 mV
6 mV
Current
1 mA
1 mA
1 mA
1 mA
1 mA
Small current
1 µA
1 µA
1 µA
1 µA
1 µA
RMS
2 mA
1 mA
400 μA
200 μA
160 μA
0.5 V
1.5 V
3V
5V
8V
Output ripple and noise (20 Hz to 20 MHz)
Overvoltage protection (OVP) ± (% of output + offset)
Accuracy
0.20%
Activation time (average time for the output to start to drop after OVP or OCP condition occurs)
Overvoltage (OVP)
< 1.5 ms when the trip voltage is greater than or equal to 3 V
Overcurrent (OCP)
< 1.5 ms
Command processing time
< 10 ms
Programming temperature coefficient per ºC (% of output + offset)
Voltage
0.005%
180 µV
600 µV
1.05 mV
1.8 mV
3.0 mV
Current
0.01%
250 µA
100 µA
50 µA
60 µA
40 µA
Readback temperature coefficient per ºC (% of output + offset)
Voltage
0.005%
12 µV
40 µV
70 µV
120 µV
200 µV
Current
0.01%
250 µA
100 µA
50 µA
30 µA
20 µA
Up, full load
25 ms
50 ms
50 ms
50 ms
100 ms
Up, no load
25 ms
50 ms
50 ms
50 ms
100 ms
Down, full load
25 ms
25 ms
25 ms
30 ms
35 ms
Down, no load
100 ms
150 ms
150 ms
250 ms
300 ms
Remote sense (max. voltage in load lead)
Output can function as described with up to a 1-V drop per load lead
Up/down programming settling time to within 1% of total excursion
I/O Interfaces
LAN (LXI Core) and USB 2.0 FS (TMC488)
06 | Keysight | E36100 Series Programmable DC Power Supplies - Data Sheet
Typical Characteristics
E36102A
E36103A
E36104A
E36105A
Environmental conditions
Operating environment
Indoor use, installation category II (for AC input), pollution degree 2
Operating temperature range
0 °C to 40 °C
Storage temperature
–20 to 70 °C
Relative humidity
Up to 95%
Altitude
Up to 2000 meters
Electromagnetic compatibility
Compliant with EMC Directive (2004/108/EC)
IEC 61326-1:2012/EN 61326-1:2013 Group 1 Class A
Canada: ICES-001:2004
Australia/New Zealand: AS/NZS
South Korea KC mark
Safety
UL 61010-1 3rd edition, CAN/CSA-C22.2 No. 61010-1-12, IEC 61010-1:2010 3rd edition
AC input
100, 115, or 230 V input (± 10%), 47 to 63 Hz, 200 VA
Net weight
3.7 kg or 8.1 lbs. (approx.)
Dimensions
2U, ¼ rack (98.5 mm (H), 106.4 mm (W), 367.7 mm (D))
E36106A
07 | Keysight | E36100 Series Programmable DC Power Supplies - Data Sheet
Ordering Information
Keysight E36100 Series Power Supplies
E36102A
DC power supply, single-output, 6 V, 5 A, 30 W
E36103A
DC power supply, single-output, 20 V, 2 A, 40 W
E36104A
DC power supply, single-output, 35 V, 1 A, 35 W
E36105A
DC power supply, single-output, 60 V, 0.6 A, 36 W
E36106A
DC power supply, single-output, 100 V, 0.4 A, 40 W
Standard Shipped Accessory
AC power cord (based on destination country)
Ordering Options
Opt. 0E3
230 VAC ± 10%
Opt. 0EM
115 VAC ± 10%
Opt. 0E9
100 VAC ± 10%
Opt. UK6
Commercial calibration with test result data
Opt. J01
Recessed binding posts
J1520AC
Universal shelf rack
J1526AC
Metal sliding shelf
08 | Keysight | E36100 Series Programmable DC Power Supplies - Data Sheet
From Hewlett-Packard through Agilent to Keysight
For more than 75 years, we‘ve been helping you unlock measurement insights. Our
unique combination of hardware, software and people can help you reach your next
breakthrough. Unlocking measurement insights since 1939.
1939
THE FUTURE
myKeysight
www.keysight.com/find/mykeysight
A personalized view into the information most relevant to you.
Three-Year Warranty
www.keysight.com/find/ThreeYearWarranty
Keysight’s committed to superior product quality and lower total cost
of ownership. Keysight is the only test and measurement company with
three-year warranty standard on all instruments, worldwide. And, we provide
a one-year warranty on many accessories, calibration devices, systems and
custom products.
Keysight Assurance Plans
www.keysight.com/find/AssurancePlans
Up to ten years of protection and no budgetary surprises to ensure your
instruments are operating to specification, so you can rely on accurate
measurements.
Keysight Infoline
www.keysight.com/find/service
Keysight’s insight to best in class information management. Free access to
your Keysight equipment company reports and e-library.
Keysight Channel Partners
www.keysight.com/find/channelpartners
Get the best of both worlds: Keysight’s measurement expertise and product
breadth, combined with channel partner convenience.
www.keysight.com/find/e36100
For more information on Keysight
Technologies’ products, applications or
services, please contact your local Keysight
office. The complete list is available at:
www.keysight.com/find/contactus
Americas
Canada
Brazil
Mexico
United States
(877) 894 4414
55 11 3351 7010
001 800 254 2440
(800) 829 4444
Asia Pacific
Australia
China
Hong Kong
India
Japan
Korea
Malaysia
Singapore
Taiwan
Other AP Countries
1 800 629 485
800 810 0189
800 938 693
1 800 11 2626
0120 (421) 345
080 769 0800
1 800 888 848
1 800 375 8100
0800 047 866
(65) 6375 8100
Europe & Middle East
Austria
Belgium
Finland
France
Germany
Ireland
Israel
Italy
Luxembourg
Netherlands
Russia
Spain
Sweden
Switzerland
United Kingdom
0800 001122
0800 58580
0800 523252
0805 980333
0800 6270999
1800 832700
1 809 343051
800 599100
+32 800 58580
0800 0233200
8800 5009286
800 000154
0200 882255
0800 805353
Opt. 1 (DE)
Opt. 2 (FR)
Opt. 3 (IT)
0800 0260637
For other unlisted countries:
www.keysight.com/find/contactus
(BP-02-10-16)
DEKRA Certified
ISO9001 Quality Management System
www.keysight.com/go/quality
Keysight Technologies, Inc.
DEKRA Certified ISO 9001:2015
Quality Management System
This information is subject to change without notice.
© Keysight Technologies, 2016
Published in USA, February 17, 2016
5992-0914EN
www.keysight.com
Similar pages