OPTEK OUE8A405Y1 Ultraviolet (uv) metal can led Datasheet

Ultraviolet (UV) Metal Can LED
OUE8A Series
Features:
•
•
•
•
•
•
Peak Wavelengths from 380 nm to 425 nm
Uniform Optical Light Pattern
High Pulse Current
Hermetic TO-46 Metal Can Package
RoHs Compliant—No Mercury
ESD Protected
The OUE8A Series offers an energy-efficient hermetic TO-46 metal can packaged UV LED source providing a
uniform optical light pattern, high current pulse capability, ESD protection and a long operating lifespan. Devices
have a 18o typical emission angle with peak wavelengths from 375 nm to 425 nm. In order to meet critical
wavelength requirements of the industry, the OUE8A Series is divided into groups each with a total wavelength
range of only 5 nm. Each wavelength range is subdivided into optical power output ranges from a minimum of 1.8
mW to over 17.0 mW based on power out specifications listed below.
Applications:
•
•
•
•
•
Adhesive-Ink Photo Catalyst Curing
Currency / Passport Validation
Spectroscopy
Forensic
Medical
Part Number
Emission
Angle
Peak Wavelength (nm)
IF = 100 mA
Optical Power Output (mW)
IF = 100 mA
Range
Minimum
Maximum
OUE8A380Y1
375 to 380
1.8
8.1
OUE8A385Y1
380 to 385
1.8
8.1
OUE8A390Y1
385 to 390
1.8
8.1
OUE8A395Y1
390 to 395
3.1
9.8
395 to 400
5.8
13.4
OUE8A405Y1
400 to 405
5.8
13.4
OUE8A410Y1
405 to 410
5.8
13.4
OUE8A415Y1
410 to 415
7.3
15.4
OUE8A420Y1
415 to 420
7.3
15.4
OUE8A425Y1
420 to 425
7.3
15.4
OUE8A400Y1
18
Part Number Guide
OUE8 A XXX Y 1
Optek UV TO-46 LED Series
Sequence Numbers (A→Z)
ESD Level ≥ 8,000 V
RoHs
Packaging 1 – Tray Pack
Power Output (mW) - A through J
Wavelength (nm) Identifier
Warnings and Handling Instructions
UV-LEDs emit invisible ultraviolet radiation when in operation,
which may be harmful to eyes or skin, even for brief periods.
Do NOT look directly into the UV-LED during operation.
Be sure that you and all persons in the vicinity wear
adequate “UV” Safety protection for eyes and skin.
If you incorporate a UV-LED into a product,
be sure to provide appropriate WARNING labels.
OPTEK reserves the right to make changes at any time in order to improve design and to supply the best product possible.
OPTEK Technology Inc. — 1645 Wallace Drive, Carrollton, Texas 75006
Phone: (972) 323-2200 or (800) 341-4747
FAX: (972) 323-2396 [email protected] www.optekinc.com
Issue A.2 07/09
Page 1 of 8
Ultraviolet (UV) Metal Can LED
OUE8A Series
Absolute Maximum Ratings (TA=25°C unless otherwise noted)
-40o C to +125o C
Storage Temperature Range
Operating Temperature Range
-40o C to +85o C
Allowable Reverse Current (IR)
85 mA
Continuous Forward Current
100 mA
Peak Pulsed Forward Current (Pulse Width 100 usec @ 10% duty cycle)
1.6 A
Lead Soldering Temperature [1/16 inch (1.6 mm) from case for 5 seconds with soldering iron]
260° C(1)
Power Dissipation
370 mW
Notes:
1. RMA flux is recommended. Duration can be extended to 10 seconds maximum when wave soldering.
Electrical & Optical Characteristics (TA = 25°C unless otherwise noted)
SYMBO
L
VF
ΔVF/ΔT
PARAMETER
Forward Voltage
MIN
TYP
MAX
UNITS
3.0
3.3
3.7
V
VF Temperature Co-efficient
mV/oC
-4.8
Spectral Half Width
-
12
-
nm
∆λP /∆T
Peak Spectral Shift with Temperature
-
0.035
-
nm/°C
ΔPo/ΔT
Power Output Drop Temperature Co-efficient
-
-0.2
-
%/oC
Emission Angle at Half Power Points
-
18
-
Degree
∆λP
θHP
TEST CONDITIONS
IF = 100 mA
IF = 20 mA
Pin 1
Pin 2
[13.20]
0.520
Pin 1
Cathode
Pin 2
Anode
Part Number
Date Code
Dimensions are in inches [ mm]
OPTEK reserves the right to make changes at any time in order to improve design and to supply the best product possible.
Issue A.2
Page 2 of 8
07/09
OPTEK Technology Inc. — 1645 Wallace Drive, Carrollton, Texas 75006
Phone: (972) 323-2200 or (800) 341-4747
FAX: (972) 323-2396 [email protected] www.optekinc.com
Ultraviolet (UV) Metal Can LED
OUE8A Series
Standard Optical Power Bins
• Devices are sorted to Optical Power Out (mW) as shown below.
• Unless designated, orders may be filled with any or all bins contained.
Power Bin
Identification
•
•
Optical Power Out (mW)
IF = 100 mA @ 25oC
Bin Minimum
Bin Maximum
OUE8AxxxA
0.5
2.0
OUE8AxxxB
1.8
3.5
OUE8AxxxC
3.1
4.9
OUE8AxxxD
4.5
6.5
OUE8AxxxE
5.8
8.1
OUE8AxxxF
7.3
9.8
OUE8AxxxG
8.8
11.5
OUE8AxxxH
10.4
13.4
OUE8AxxxI
12.1
15.4
OUE8AxxxJ
13.9
17.6
Where xxx = Part Number Wavelength (nm) on page 1
Parts for a specific Power Bin are subject to availability.
Spatial Intensity Distribution
TA = 25°C
IF = 20 mA
18 degrees Typical
Normalized Spectral Intensity vs. Angular Displacement
OPTEK reserves the right to make changes at any time in order to improve design and to supply the best product possible.
OPTEK Technology Inc. — 1645 Wallace Drive, Carrollton, Texas 75006
Phone: (972) 323-2200 or (800) 341-4747
FAX: (972) 323-2396 [email protected] www.optekinc.com
Issue A.2 07/09
Page 3 of 8
Ultraviolet (UV) Metal Can LED
OUE8A Series
Junction Temperature vs. Maximum
Allowable Forward Current
Relative Power Output vs Junction
Temperature
1.2
Maximum Allowable Forward Current IF [mA]
120
Relative Power Output (mW)
1.0
0.8
0.6
0.4
0.2
100
80
60
40
20
0
0.0
0
20
40
60
80
0
100
20
o
60
Normalized Peak Spectral Responses
6,000
383nm
Peak Response (W/nm)
391nm
399nm
407nm
409nm
0.6
0.4
0.2
0
350
TA = 25°C
Allowable Pulsed Forward Current [mA]
386nm
0.8
100
Duty Ratio vs. Allowable Forward Current
T = 1 ms & variable PW
380nm
1
80
Junction Temperature, TJ [°C]
Junction Temperature ( C)
1.2
40
5,000
4,000
3,000
2,000
1,000
-
400
450
Wavelength (nm)
1
10
100
Duty Ratio (%)
OPTEK reserves the right to make changes at any time in order to improve design and to supply the best product possible.
Issue A.2
Page 4 of 8
07/09
OPTEK Technology Inc. — 1645 Wallace Drive, Carrollton, Texas 75006
Phone: (972) 323-2200 or (800) 341-4747
FAX: (972) 323-2396 [email protected] www.optekinc.com
Ultraviolet (UV) Metal Can LED
OUE8A Series
Peak Wavelength vs Junction
Temperature
1.010
Forward Voltage vs. Forward Current
400
* no rmalized to 25°C
** peak wavelength = wavelength o f part
multiplied by y-axis scale
TA = 25°C
350
300
FP
[mA]
1.006
1.004
1.002
Linear (390 nm)
Linear (410 nm)
1.000
Forward Current I
Peak Wavelength λ [nm] **
1.008
250
200
150
100
0.998
50
0.996
0
0
20
40
60
80
100
120
2.5
2.7
Junction Temperature TA [°C]
2.9
Typical Power Out vs. Forward Current
3.3
3.5
3.7
Typical Peak Wavelength vs. Forward
Current
2.0
1.0020
TA = 25°C
* no rmalized to 100 mA
** peak wavelength = wavelength o f
part multiplied by y-axis scale
1.8
1.0015
1.6
Typ. Peak Wavelength [nm] **
Normalized Power Out [W]
3.1
Forw ard Voltage V F [V]
1.4
1.2
1.0
0.8
0.6
0.4
1.0010
Linear (410 nm)
Linear (390 nm)
1.0005
1.0000
0.9995
0.9990
0.9985
0.2
0.9980
0.0
0
50
100
150
Forward Current [mA]
200
0
50
100
150
200
Forw ard Current [m A]
OPTEK reserves the right to make changes at any time in order to improve design and to supply the best product possible.
OPTEK Technology Inc. — 1645 Wallace Drive, Carrollton, Texas 75006
Phone: (972) 323-2200 or (800) 341-4747
FAX: (972) 323-2396 [email protected] www.optekinc.com
Issue A.2 07/09
Page 5 of 8
Ultraviolet (UV) Metal Can LED
OUE8A Series
Reliability Test
ITEM
CONDITION
NOTE
FAILURES
Life Test
TA = RT, IF = 20 mA
1000 hrs
0/22
Temperature Humidity
Operating
TA = RT, IF = 20 mA, RH = 90%
1000 hrs
0/22
High Temperature
Operating
TA = 80ºC, IF = 5 mA
1000 hrs
0/22
Low Temperature
Operating
TA = -40ºC, IF =20 mA
1000 hrs
0/22
Thermal Shock
TA = -40ºC (30 min) to +85ºC (30 min)
[Transfer Time: 5 sec, 1 cycle = 1hr]
100 cycles
0/22
Resistance to
Soldering Heat
Ts = 260 ± 5ºC, Time = 5 ± 1 sec
1 time
0/11
High Temperature
Storage
TA = +100ºC
1000 hrs
0/22
Low Temperature
Storage
TA = -40ºC
1000 hrs
0/22
Criteria for judging damage
CRITERIA FOR JUDGEMENT
ITEM
SYMBOL
MEASURING CONDITION
Minimum
Maximum
Forward Voltage
VF
IF = 20 mA
-
USL X 1.1
Optical Power
Output
PO
IF = 20 mA
LSL X 0.5
-
Notes:
1.
2.
3.
4.
5.
6.
7.
IF = Forward Current
LSL = Lower Specification Limit
RH = Relative humidity
RT = Room Temperature ~ 25°C
TA = Ambient Temperature
TS = Solder Temperature
USL = Upper Specification Limit
OPTEK reserves the right to make changes at any time in order to improve design and to supply the best product possible.
Issue A.2
Page 6 of 8
07/09
OPTEK Technology Inc. — 1645 Wallace Drive, Carrollton, Texas 75006
Phone: (972) 323-2200 or (800) 341-4747
FAX: (972) 323-2396 [email protected] www.optekinc.com
Ultraviolet (UV) Metal Can LED
OUE8A Series
Stress results
Test
Operating Life
Samples
Test conditions
Total assembly
hours
Failures
22
1008 hours, TA @ 25ºC, 100mW
operation, IF = 27.7mA
22,176
0/22
D&O 380nm UVLED Build 1 - 100mW burn-in
Group H
Tested at IF = 350 mA, T A = 25°C
25.00
Pt/mW
20.00
average
15.00
min
max
+3σ
10.00
-3σ
5.00
0.00
0
200
400
600
800
1000
1200
hours
OPTEK reserves the right to make changes at any time in order to improve design and to supply the best product possible.
OPTEK Technology Inc. — 1645 Wallace Drive, Carrollton, Texas 75006
Phone: (972) 323-2200 or (800) 341-4747
FAX: (972) 323-2396 [email protected] www.optekinc.com
Issue A.2 07/09
Page 7 of 8
Ultraviolet (UV) Metal Can LED
OUE8A Series
Shipping Information:
Optek UV LEDs are shipped in either of the below noted conductive trays made for ESD sensitive devices.
Each tray contains up to 100 pieces and is then sealed in a plastic ESD bag. Tray dimensions are in inches
(mm).
14.76
4X 0.500 [12.70]
100X 0.250
100X 0.190
13.0
100X 0.250
100X 1.320
POCKET DETAIL
OPTEK reserves the right to make changes at any time in order to improve design and to supply the best product possible.
Issue A.2
Page 8 of 8
07/09
OPTEK Technology Inc. — 1645 Wallace Drive, Carrollton, Texas 75006
Phone: (972) 323-2200 or (800) 341-4747
FAX: (972) 323-2396 [email protected] www.optekinc.com
Similar pages