Z ibo Seno Electronic Engineering Co., Ltd. HER101 – HER108 1.0A HIGH EFFICIENCY RECTIFIER Features ! ! ! ! ! Diffused Junction Low Forward Voltage Drop High Current Capability High Reliability High Surge Current Capability A B A Mechanical Data ! ! ! ! ! ! ! C Case: Molded Plastic Terminals: Plated Leads Solderable per MIL-STD-202, Method 208 Polarity: Cathode Band Weight: 0.34 grams (approx.) Mounting Position: Any Marking: Type Number Lead Free: For RoHS / Lead Free Version D DO-41 Max Dim Min 24.5 — A 4.06 5.21 B 0.60 0.80 C 2.00 3.00 D All Dimensions in mm Maximum Ratings and Electrical Characteristics @TA=25°C unless otherwise specified Single Phase, half wave, 60Hz, resistive or inductive load. For capacitive load, derate current by 20%. Characteristic Peak Repetitive Reverse Voltage Working Peak Reverse Voltage DC Blocking Voltage RMS Reverse Voltage Average Rectified Output Current (Note 1) @TA = 55°C Symbol HER 101 HER 102 HER 103 HER 104 HER 105 HER 106 HER 107 HER 108 Unit VRRM VRWM VR 50 100 200 300 400 600 800 1000 V VR(RMS) 35 70 140 210 280 420 560 700 V IO 1.0 A Non-Repetitive Peak Forward Surge Current 8.3ms Single half sine-wave superimposed on rated load (JEDEC Method) IFSM 30 A Forward Voltage @IF = 1.0A VFM @TA = 25°C @TA = 100°C IRM Peak Reverse Current At Rated DC Blocking Voltage 1.0 1.3 1.7 5.0 100 V µA Reverse Recovery Time (Note 2) trr 50 75 nS Typical Junction Capacitance (Note 3) Cj 20 15 pF Operating Temperature Range Tj -65 to +150 °C TSTG -65 to +150 °C Storage Temperature Range *Glass passivated forms are available upon request Note: 1. Leads maintained at ambient temperature at a distance of 9.5mm from the case 2. Measured with IF = 0.5A, IR = 1.0A, IRR = 0.25A. See figure 5. 3. Measured at 1.0 MHz and applied reverse voltage of 4.0V D.C. HER101 – HER108 1 of 2 www.senocn.com Alldatasheet Z ibo Seno Electronic Engineering Co., Ltd. 1.00 IF, INSTANTANEOUS FORWARD CURRENT (A) I(AV), AVERAGE FWD RECTIFIED CURRENT (A) HER101 – HER108 Single phase half wave Resistive or Inductive load 0.75 0.50 0.25 0 0 25 50 75 100 125 150 Tj = 25°C Pulse width = 300µs 10 0.1 HER106- HER108 0.01 0 175 TA, AMBIENT TEMPERATURE (°C) Fig. 1 Forward Current Derating Curve 0.2 0.4 0.6 0.8 1.0 1.2 1.4 VF, INSTANTANEOUS FORWARD VOLTAGE (V) Fig. 2 Typical Forward Characteristics 30 100 Tj = 25°C f = 1.0MHz Pulse width 8.3 ms single half-sine-wave (JEDEC method) Cj, CAPACITANCE (pF) IFSM, PEAK FORWARD SURGE CURRENT (A) HER105 HER101 - HER104 1.0 20 10 HER101 - HER105 10 HER106- HER108 1 0 1 10 NUMBER OF CYCLES AT 60Hz Fig. 3 Peak Forward Surge Current 1 100 10 100 VR, REVERSE VOLTAGE (V) Fig. 4 Typical Junction Capacitance trr +0.5A 50Ω NI (Non-inductive) 10Ω NI Device Under Test (-) 0A (+) Pulse Generator (Note 2) 50V DC Approx (-) 1.0Ω NI Oscilloscope (Note 1) -0.25A (+) Notes: 1. Rise Time = 7.0ns max. Input Impedance = 1.0MΩ, 22pF. 2. Rise Time = 10ns max. Input Impedance = 50Ω. -1.0A Set time base for 5/10ns/cm Fig. 5 Reverse Recovery Time Characteristic and Test Circuit HER101 – HER108 2 of 2 www.senocn.com Alldatasheet