Kemet B45196H Tantalum chip capacitors standard / highcap Datasheet

Tantalum Chip Capacitors
Standard / HighCap
Series/Type:
Date:
B45196E, B45198E,
B45196H, B45198H
July 2006
© KEMET 2006. Reproduction, publication and dissemination of this publication, enclosures hereto and the
information contained therein without KEMET's prior express consent is prohibited.
Tantalum chip capacitors
B45196E, B45198E, B45196H, B45198H
Standard / HighCap
Construction
Polar tantalum capacitors with solid
electrolyte
Conventional TaMnO2 technology
Flame-retardant plastic case (UL 94 V-0)
Optionally tinned or gold-plated terminals
Features
Ultra-high volumetric efficiency
Excellent solderability
Stable temperature and frequency characteristics
Low leakage current, low dissipation factor
Low self-inductance
High resistance to shock and vibration
Suitable for use without series resistor (special operating conditions recommended)
Lead-free and material content compatible with RoHS
Some partnumbers are only available in M (±20%) tolerance; these types have a maximum
capacitance drift at +125 °C of +20%
Applications
Telecommunications (e.g. mobile phones, infrastructure)
Data processing (e.g. laptops, mainframes)
Measuring and control engineering (e.g. voltage regulators)
Automotive electronics (e.g. safety applications e.g airbags, ABS, motor management)
Medical engineering
DC/DC converters
Soldering
Suitable for reflow soldering (IR and vapor phase, in compliance with JEDEC J-STD-020 C) and
wave soldering
Delivery mode
Taped and reeled in accordance with IEC 60286-3
Please read Important notes and
Cautions and warnings at the end of this document.
Page 2 of 20
Tantalum chip capacitors
B45196E, B45198E, B45196H, B45198H
Standard / HighCap
Dimensional drawing
➀ Encapsulation: molded epoxy resin
➁ NiFe; tinned surface Sn100 or gold-plated
➂ Reduced slot length for case size A
Dimensions
Case size
KEMET EIA/IECQ
A
3216-18
B
3528-21
C
6032-28
D
7343-31
E
7343-44
Dimensions in mm (inches)
L
3.2 ±0.2
(.126
±0.008)
3.5 ±0.2
(.138
±0.008)
6.0 ±0.3
(.236
±0.012)
7.3 ±0.3
(.287
±0.012)
7.3 ±0.3
(.287
±0.012)
W
1.6 ±0.2
(.063
±0.008)
2.8 ±0.2
(.110
±0.008)
3.2 ±0.3
(.126
±0.012)
4.3 ±0.3
(.169
±0.012)
4.3 ±0.3
(.169
±0.012)
Please read Important notes and
Cautions and warnings at the end of this document.
H
1.6 ±0.2
(.063
±0.008)
1.9 ±0.2
(.075
±0.008)
2.5 ±0.3
(.098
±0.012)
2.8 ±0.3
(.110
±0.012)
4.1 ±0.3
(.161
±0.012)
Page 3 of 20
L2 typ. W2 ±0.1
H2 typ. P ±0.3
±(.004)
±(.012)
3.2
1.2
1.3
0.8
(.126) (.047)
(.051) (.031)
3.5
2.2
(.138) (.087)
1.4
0.7
(.055) (.027)
6.1
2.2
(.240) (.087)
1.8
1.3
(.071) (.051)
7.3
2.4
(.287) (.094)
1.8
1.3
(.071) (.051)
7.3
2.4
(.287) (.094)
1.8
1.3
(.071) (.051)
Tantalum chip capacitors
B45196E, B45198E, B45196H, B45198H
Standard / HighCap
Marking
Case size A
Case size B
Case sizes C, D, E
Voltage coding for case size A
Rated voltage
4
6.3 10
16
20
25
35
50
Code letter
G
J
C
D
E
V
T
A
Capacitance coding
1st and 2nd digit
Capacitance in pF
3rd digit
Multiplier:
6 = 106 pF
7 = 107 pF
8 = 108 pF
Date coding
Year
Month
S = 2004
T = 2005
U = 2006
V = 2007
W = 2008
X = 2009
1 = January
2 = February
3 = March
4 = April
5 = May
6 = June
7 = July
8 = August
9 = September
O = October
N = November
D = December
Please read Important notes and
Cautions and warnings at the end of this document.
Page 4 of 20
Tantalum chip capacitors
B45196E, B45198E, B45196H, B45198H
Standard / HighCap
Specifications and characteristics for Standard series in brief
Series
Ordering code
Standard
B45196E
B45198E
Technology
Ta-MnO2
Ta-MnO2
Terminals
Tinned
Gold-plated
Rated voltage
(up to 85 °C)
VR
4 ... 50
VDC
Rated capacitance
(20 °C, 120 Hz)
CR
0.10 ... 100
µF
±20%, ±10%
Capacitance tolerance
Maximum impedance
(20 °C, 100 kHz)
Operating temperature range
Failure rate
(1 fit = 110-9 failures/h)
CR VR ≤ 330 µF V
CR VR > 330 µF V
Service life
Leakage current
Zmax
0.8 ... 28
Ω
Top
55 ... +125
°C
(at 40 °C; ≤ VR,
RS ≥ 3 Ω/V)
fit
≤3
≤10
(VR, 5 min, 20 °C)
Ileak
Detail specification
Climatic category
(to IEC 60068-1)
>500000
10
CECC 30801-801
(55 °C/+125 °C/56
days damp heat test)
Please read Important notes and
Cautions and warnings at the end of this document.
Page 5 of 20
55/125/56
h
nA/µC
Tantalum chip capacitors
B45196E, B45198E, B45196H, B45198H
Standard / HighCap
Specifications and characteristics for HighCap series in brief
Series
Ordering code
HighCap
B45196H
B45198H
Technology
Ta-MnO2
Ta-MnO2
Terminals
Tinned
Gold-plated
Rated voltage
(up to 85 °C)
VR
4 ... 50
VDC
Rated capacitance
(20 °C, 120 Hz)
CR
0.15 ... 1500
µF
±20%, ±10%
Capacitance tolerance
Maximum impedance
(20 °C, 100 kHz)
Operating temperature range
Failure rate
(1 fit = 110-9 failures/h)
CR VR ≤ 330 µF V
CR VR > 330 µF V
Service life
Leakage current
Zmax
0.4 ... 22
Ω
Top
55 ... +125
°C
(at 40 °C; ≤ VR,
RS ≥ 3 Ω/V)
fit
≤8
≤24
(VR, 5 min, 20 °C)
Ileak
Detail specification
Climatic category
(to IEC 60068-1)
>500000
10
CECC 30801-802
(55 °C/+125 °C/56
days damp heat test)
Please read Important notes and
Cautions and warnings at the end of this document.
Page 6 of 20
55/125/56
h
nA/µC
Tantalum chip capacitors
B45196E, B45198E, B45196H, B45198H
Standard / HighCap
Overview of types
(VDC)
(up to 85 °C)
CR (µF)
4
6.3
10
16
20
25
35
50
0.10
A
0.15
A
A
B
0.22
A
A
B
0.33
A
0.47
0.68
A
1.0
2.2
A
A
A
A
A
A
3.3
A
A
4.7
A
A
6.8
A
15
A
B
A
B
A
B
A
B
A
B
A
B
A
A
B
A
B
A
B
A
B
B
A
A
B
B
C
C
A B C
C
D
B
A B C
C
D
C
D
A B C
E
A B C A B C A B C B C D
C
D
D
E
47
A B C A B C D B C D
C
D
68
A B C D A B C D B C D
C
D
100
A B C D B C D B C D C D E
150
B C D B C D C D E
220
B C D C D E C D E
330
C D E C D E
D
E
470
C D E
D
E
D
E
1000
E
E
1500
E
E
D
D
A B C A B C A B C D B C D
E
C
D
A B C A B C A B C B C D B C D
D
B
C
33
E
B
A
A B C A B C A B C D
A B C A B C A B C B C D B C D
D
A
A B C A B C B C D
22
680
A
A
1.5
10
B
A
D
E
D
E
E
E
Upon request
Please read Important notes and
Cautions and warnings at the end of this document.
Page 7 of 20
C
D
C D E
C
D
C D E
D
E
D
E
E
D
E
E
E
C
D
D
E
D
E
E
E
Tantalum chip capacitors
B45196E, B45198E, B45196H, B45198H
Standard / HighCap
Ordering code structure
B45
196E
0
685
Tantalum
capacitor
Series
196E = Standard, tinned terminals
198E = Standard, gold-plated terminals
196H = HighCap, tinned terminals
198H = HighCap, gold-plated terminals
Rated voltage
0 = 4 V, 1 = 6.3 V, 2 = 10 V, 3 = 16 V, 4 = 20 V, 5 = 25 V,
6 = 35 V, 7 = 50 V
Rated capacitance + exponent
C [pF] 10x
E.g.: 686 = 68 pF 106 = 68 µF, 157 = 15 pF 107 = 150 µF
Capacitance tolerance
M = ±20%, K = ±10%
Case size
10 = A
20 = B
30 = C
40 = D
50 = E
Reel diameter
9 = 180 mm, 6 = 330 mm
Please read Important notes and
Cautions and warnings at the end of this document.
Page 8 of 20
+
10
*
Tantalum chip capacitors
B45196E, B45198E, B45196H, B45198H
Standard / HighCap
Technical data and ordering codes
CR
Case size
(20 °C, 120 Hz)
µF
DFmax
Ileak,max
(20 °C, 120 Hz) (20 °C, VR,
5 min)
%
µA
VR (up to 85 °C) = 4 VDC, VR (up to 125 °C) = 2.5 VDC
3.3
A
0.5
6
4.7
A
0.5
6
6.8
A
0.5
6
A
0.5
10
6
B
0.5
10
6
A
0.6
15
6
B
0.6
15
6
A
0.9
22
8
B
0.9
22
6
C
0.9
22
6
A
1.3
33
8
B
1.3
33
6
C
1.3
33
6
A
1.9
47
10
B
1.9
47
6
C
1.9
47
6
A
2.7
68
30
B
2.7
68
6
C
2.7
68
6
D
2.7
68
6
A
4.0
100
30
B
4.0
100
8
C
4.0
100
8
D
4.0
100
8
B
6.0
150
10
C
6.0
150
8
D
6.0
150
8
B
8.8
220
20
C
8.8
220
15
D
8.8
220
8
C
13.2
330
15
D
13.0
330
10
Zmax
(20 °C,
100 kHz)
Ω
9.0
7.0
6.0
4.5
4.5
4.0
3.5
3.5
3.0
2.4
3.0
2.5
2.0
2.8
2.3
1.6
4.0
1.8
1.5
1.1
4.0
1.6
1.4
0.8
1.5
1.3
0.8
1.5
1.2
0.8
1.2
0.9
● Preliminary Data
*=
Code number for reel diameter
6 = 330-mm reel
9 = 180-mm reel
Please read Important notes and
Cautions and warnings at the end of this document.
+ = Capacitance tolerance
M = ±20%
K = ±10%
Page 9 of 20
Ordering code
B45196E0335+10*
B45196E0475+10*
B45196H0685+10*
B45196H0106+10*
B45196E0106+20*
B45196H0156+10*
B45196E0156+20*
B45196H0226+10*
B45196H0226+20*
B45196E0226+30*
B45196H0336+10*
B45196H0336+20*
B45196E0336+30*
B45196H0476+10*
B45196H0476+20*
B45196H0476+30*
B45196H0686M10* ●
B45196H0686+20*
B45196H0686+30*
B45196E0686+40*
B45196H0107M10* ●
B45196H0107+20*
B45196H0107+30*
B45196E0107+40*
B45196H0157+20* ●
B45196H0157+30*
B45196H0157+40*
B45196H0227M20* ●
B45196H0227+30*
B45196H0227+40*
B45196H0337+30* ●
B45196H0337+40*
Tantalum chip capacitors
B45196E, B45198E, B45196H, B45198H
Standard / HighCap
CR
Case size
(20 °C, 120 Hz)
DFmax
Ileak,max
(20 °C, 120 Hz) (20 °C, VR,
5 min)
µF
%
µA
E
13.0
330
8
C
14.2
470
20
D
19.0
470
10
E
19.0
470
8
D
27.2
680
12
E
27.0
680
12
E
40.0
1000
15
E
60.0
1500
25
VR (up to 85 °C) = 6.3 VDC, VR (up to 125 °C) = 4 VDC
2.2
A
0.5
6
3.3
A
0.5
6
4.7
A
0.5
6
6.8
A
0.5
6
6.8
B
0.5
6
A
0.6
10
6
B
0.6
10
6
A
0.9
15
6
B
0.9
15
6
C
1.0
15
6
A
1.4
22
8
B
1.4
22
6
C
1.4
22
6
A
2.1
33
10
B
2.1
33
6
C
2.1
33
6
A
3.0
47
15
B
3.0
47
6
C
3.0
47
6
D
3.0
47
6
A
4.3
68
15
B
4.3
68
8
C
4.3
68
6
D
4.3
68
6
B
6.3
100
12
Zmax
(20 °C,
100 kHz)
Ω
0.8
1.2
0.9
0.6
0.9
0.6
0.6
0.6
Ordering code
10.0
7.0
5.5
4.5
4.5
4.0
3.5
3.8
3.0
2.4
3.0
2.5
2.0
2.8
2.2
1.6
3.5
2.0
1.5
1.1
3.5
1.8
1.4
0.8
1.6
B45196E1225+10*
B45196E1335+10*
B45196H1475+10*
B45196H1685+10*
B45196E1685+20*
B45196H1106+10*
B45196E1106+20*
B45196H1156+10*
B45196H1156+20*
B45196E1156+30*
B45196H1226+10*
B45196H1226+20*
B45196E1226+30*
B45196H1336+10*
B45196H1336+20*
B45196H1336+30*
B45196H1476M10* ●
B45196H1476+20*
B45196H1476+30*
B45196E1476+40*
B45196H1686M10* ●
B45196H1686+20*
B45196H1686+30*
B45196E1686+40*
B45196H1107+20*
● Preliminary Data
*=
Code number for reel diameter
6 = 330-mm reel
9 = 180-mm reel
Please read Important notes and
Cautions and warnings at the end of this document.
+ = Capacitance tolerance
M = ±20%
K = ±10%
Page 10 of 20
B45196H0337+50*
B45196H0477+30* ●
B45196H0477+40*
B45196H0477+50*
B45196H0687+40*
B45196H0687+50*
B45196H0108+50* ●
B45196H0158+50* ●
Tantalum chip capacitors
B45196E, B45198E, B45196H, B45198H
Standard / HighCap
CR
Case size
(20 °C, 120 Hz)
DFmax
Ileak,max
(20 °C, 120 Hz) (20 °C, VR,
5 min)
µF
%
µA
C
6.3
100
8
D
6.3
100
8
B
9.5
150
15
C
9.5
150
8
D
9.5
150
8
C
14.0
220
10
D
14.0
220
8
E
14.0
220
12
C
20.8
330
15
D
21.0
330
8
E
21.0
330
8
D
30.0
470
15
E
30.0
470
8
D
42.8
680
20
E
43.0
680
15
E
63.0
1000
20
E
60.0
1500
25
VR (up to 85 °C) = 10 VDC, VR (up to 125 °C) = 6.3 VDC
1.5
A
0.5
6
2.2
A
0.5
6
3.3
A
0.5
6
4.7
A
0.5
6
4.7
B
0.5
6
6.8
A
0.7
6
6.8
B
0.7
6
A
1.0
10
6
B
1.0
10
6
C
1.0
10
6
A
1.5
15
6
B
1.5
15
6
C
1.5
15
6
A
2.2
22
8
B
2.2
22
6
C
2.2
22
6
Zmax
(20 °C,
100 kHz)
Ω
1.2
0.8
1.5
1.3
0.8
1.2
0.8
0.8
0.5
0.8
0.6
0.9
0.6
0.5
0.6
0.6
0.6
Ordering code
10.0
7.0
5.5
4.5
4.5
4.0
3.5
3.8
3.0
2.4
3.2
2.5
2.0
3.2
2.3
1.6
B45196E2155+10*
B45196E2225+10*
B45196H2335+10*
B45196H2475+10*
B45196E2475+20*
B45196H2685+10*
B45196E2685+20*
B45196H2106+10*
B45196H2106+20*
B45196E2106+30*
B45196H2156+10*
B45196H2156+20*
B45196E2156+30*
B45196H2226+10*
B45196H2226+20*
B45196H2226+30*
● Preliminary Data
*=
Code number for reel diameter
6 = 330-mm reel
9 = 180-mm reel
Please read Important notes and
Cautions and warnings at the end of this document.
+ = Capacitance tolerance
M = ±20%
K = ±10%
Page 11 of 20
B45196H1107+30*
B45196H1107+40*
B45196H1157M20* ●
B45196H1157+30*
B45196H1157+40*
B45196H1227+30*
B45196H1227+40*
B45196H1227+50*
B45196H1337+30* ●
B45196H1337+40*
B45196H1337+50*
B45196H1477+40*
B45196H1477+50*
B45196H1687+40* ●
B45196H1687+50*
B45196H1108+50* ●
B45196H1158+50* ●
Tantalum chip capacitors
B45196E, B45198E, B45196H, B45198H
Standard / HighCap
CR
Case size
(20 °C, 120 Hz)
DFmax
Ileak,max
(20 °C, 120 Hz) (20 °C, VR,
5 min)
µF
%
µA
A
3.3
33
10
B
3.3
33
6
C
3.0
33
6
D
3.3
33
6
B
4.7
47
8
C
4.7
47
6
D
4.7
47
6
B
6.8
68
8
C
6.8
68
6
D
6.8
68
6
B
10.0
100
12
C
10.0
100
8
D
10.0
100
8
C
15.0
150
10
D
15.0
150
8
E
15.0
150
8
C
22.0
220
10
D
22.0
220
10
E
22.0
220
8
D
33.0
330
12
E
33.0
330
10
D
47.0
470
15
E
47.0
470
12
E
68.0
680
15
VR (up to 85 °C) = 16 VDC, VR (up to 125 °C) = 10 VDC
1.0
A
0.5
4
1.5
A
0.5
6
2.2
A
0.5
6
3.3
A
0.5
6
3.3
B
0.6
6
4.7
A
0.8
6
4.7
B
0.8
6
6.8
A
1.1
6
6.8
B
1.1
6
Zmax
(20 °C,
100 kHz)
Ω
3.0
2.0
1.5
1.1
1.6
1.4
0.8
1.2
1.2
0.8
1.2
1.2
0.8
1.0
0.8
0.8
0.9
0.8
0.6
0.9
0.6
0.5
0.6
0.6
Ordering code
10.0
8.0
6.5
5.0
5.0
4.0
3.5
3.8
3.0
B45196E3105+10*
B45196E3155+10*
B45196H3225+10*
B45196H3335+10*
B45196E3335+20*
B45196H3475+10*
B45196E3475+20*
B45196H3685+10*
B45196H3685+20*
● Preliminary Data
*=
Code number for reel diameter
6 = 330-mm reel
9 = 180-mm reel
Please read Important notes and
Cautions and warnings at the end of this document.
+ = Capacitance tolerance
M = ±20%
K = ±10%
Page 12 of 20
B45196H2336M10* ●
B45196H2336+20*
B45196H2336+30*
B45196E2336+40*
B45196H2476+20*
B45196H2476+30*
B45196E2476+40*
B45196H2686+20* ●
B45196H2686+30*
B45196H2686+40*
B45196H2107M20* ●
B45196H2107+30*
B45196H2107+40*
B45196H2157+30* ●
B45196H2157+40*
B45196H2157+50*
B45196H2227+30* ●
B45196H2227+40*
B45196H2227+50*
B45196H2337+40*
B45196H2337+50*
B45196H2477+40* ●
B45196H2477+50*
B45196H2687+50* ●
Tantalum chip capacitors
B45196E, B45198E, B45196H, B45198H
Standard / HighCap
CR
Case size
(20 °C, 120 Hz)
DFmax
Ileak,max
(20 °C, 120 Hz) (20 °C, VR,
5 min)
µF
%
µA
6.8
C
1.1
6
A
1.6
10
6
B
1.6
10
6
C
1.6
10
6
A
2.4
15
8
B
2.4
15
6
C
2.4
15
6
B
3.5
22
6
C
3.5
22
6
D
3.6
22
6
B
5.3
33
8
C
5.3
33
6
D
5.3
33
6
C
7.5
47
6
D
7.5
47
6
C
11.0
68
6
D
11.0
68
6
C
16.0
100
10
D
16.0
100
8
E
16.0
100
8
D
24.0
150
10
E
24.0
150
8
D
35.2
220
15
E
35.0
220
10
E
52.8
330
12
VR (up to 85 °C) = 20 VDC, VR (up to 125 °C) = 13 VDC
0.68
A
0.5
4
A
0.5
1
4
1.5
A
0.5
6
2.2
A
0.5
6
2.2
B
0.5
6
3.3
A
0.7
6
3.3
B
0.7
6
4.7
A
0.9
6
Zmax
(20 °C,
100 kHz)
Ω
2.4
3.0
2.5
2.0
3.5
2.3
1.6
2.6
1.5
1.1
2.1
1.4
1.0
1.4
0.8
1.2
0.8
1.0
0.8
0.8
0.9
0.6
0.9
0.9
0.4
Ordering code
12.0
9.0
8.0
6.0
6.0
4.0
4.5
3.5
B45196E4684+10*
B45196E4105+10*
B45196H4155+10*
B45196H4225+10*
B45196E4225+20*
B45196H4335+10*
B45196E4335+20*
B45196H4475+10*
● Preliminary Data
*=
Code number for reel diameter
6 = 330-mm reel
9 = 180-mm reel
Please read Important notes and
Cautions and warnings at the end of this document.
+ = Capacitance tolerance
M = ±20%
K = ±10%
Page 13 of 20
B45196E3685+30*
B45196H3106+10*
B45196H3106+20*
B45196E3106+30*
B45196H3156+10* ●
B45196H3156+20*
B45196H3156+30*
B45196H3226+20*
B45196H3226+30*
B45196E3226+40*
B45196H3336+20* ●
B45196H3336+30*
B45196E3336+40*
B45196H3476+30*
B45196H3476+40*
B45196H3686+30*
B45196H3686+40*
B45196H3107+30* ●
B45196H3107+40*
B45196H3107+50*
B45196H3157+40*
B45196H3157+50*
B45196H3227+40* ●
B45196H3227+50*
B45196H3337+50* ●
Tantalum chip capacitors
B45196E, B45198E, B45196H, B45198H
Standard / HighCap
CR
Case size
(20 °C, 120 Hz)
DFmax
Ileak,max
(20 °C, 120 Hz) (20 °C, VR,
5 min)
µF
%
µA
4.7
B
0.9
6
4.7
C
1.0
6
6.8
A
1.4
6
6.8
B
1.4
6
6.8
C
1.4
6
A
2.0
10
8
B
2.0
10
6
C
2.0
10
6
B
3.0
15
6
C
3.0
15
6
D
3.0
15
6
B
4.4
22
6
C
4.4
22
6
D
4.4
22
6
C
6.6
33
6
D
6.6
33
6
C
9.4
47
6
D
9.4
47
6
E
9.4
47
6
D
14.0
68
6
E
14.0
68
6
D
20.0
100
8
E
20.0
100
8
E
30.0
150
10
VR (up to 85 °C) = 25 VDC, VR (up to 125 °C) = 16 VDC
0.47
A
0.5
4
0.68
A
0.5
4
A
0.5
1
4
1.5
A
0.5
6
1.5
B
0.5
6
2.2
A
0.6
6
2.2
B
0.6
6
3.3
A
0.8
6
3.3
B
0.8
6
Zmax
(20 °C,
100 kHz)
Ω
3.0
2.4
3.0
2.5
2.0
4.0
2.3
1.6
2.5
1.5
1.2
2.5
1.4
1.0
1.5
0.8
0.9
0.8
0.8
0.9
0.8
0.9
0.8
0.4
Ordering code
13.0
10.0
8.0
7.0
7.0
7.0
5.0
3.7
4.0
B45196E5474+10*
B45196E5684+10*
B45196H5105+10*
B45196H5155+10*
B45196E5155+20*
B45196H5225+10*
B45196E5225+20*
B45196H5335+10* ●
B45196H5335+20*
● Preliminary Data
*=
Code number for reel diameter
6 = 330-mm reel
9 = 180-mm reel
Please read Important notes and
Cautions and warnings at the end of this document.
+ = Capacitance tolerance
M = ±20%
K = ±10%
Page 14 of 20
B45196H4475+20*
B45196E4475+30*
B45196H4685+10* ●
B45196H4685+20*
B45196E4685+30*
B45196H4106+10* ●
B45196H4106+20*
B45196H4106+30*
B45196H4156+20* ●
B45196H4156+30*
B45196E4156+40*
B45196H4226+20* ●
B45196H4226+30*
B45196E4226+40*
B45196H4336+30*
B45196H4336+40*
B45196H4476+30* ●
B45196H4476+40*
B45196H4476+50*
B45196H4686+40*
B45196H4686+50*
B45196H4107+40* ●
B45196H4107+50*
B45196H4157+50* ●
Tantalum chip capacitors
B45196E, B45198E, B45196H, B45198H
Standard / HighCap
CR
Case size
(20 °C, 120 Hz)
DFmax
Ileak,max
(20 °C, 120 Hz) (20 °C, VR,
5 min)
µF
%
µA
3.3
C
0.9
6
4.7
A
1.2
8
4.7
B
1.2
6
4.7
C
1.2
6
6.8
A
1.7
8
6.8
B
1.7
6
6.8
C
1.7
6
6.8
D
1.7
6
B
2.5
10
6
C
2.5
10
6
D
2.5
10
6
B
3.8
15
8
C
3.8
15
6
D
3.8
15
6
C
5.5
22
6
D
5.5
22
6
C
8.3
33
6
D
8.3
33
6
E
8.3
33
6
D
12.0
47
6
E
12.0
47
6
E
17.0
68
6
E
25.0
100
10
VR (up to 85 °C) = 35 VDC, VR (up to 125 °C) = 23 VDC
0.10
A
0.5
4
0.15
A
0.5
4
0.22
A
0.5
4
0.33
A
0.5
4
0.47
A
0.5
4
0.47
B
0.5
4
0.68
A
0.5
4
0.68
B
0.5
4
A
0.5
1
4
B
0.5
1
4
Zmax
(20 °C,
100 kHz)
Ω
2.8
4.0
3.2
2.3
4.0
2.8
2.0
1.8
2.5
1.6
1.2
2.5
1.5
1.0
1.4
0.8
0.9
0.8
0.8
0.8
0.8
0.9
0.4
Ordering code
28.0
23.0
19.0
15.0
11.0
11.0
8.0
8.0
7.0
7.0
B45196E6104+10*
B45196E6154+10*
B45196E6224+10*
B45196E6334+10*
B45196H6474+10*
B45196E6474+20*
B45196H6684+10*
B45196E6684+20*
B45196H6105+10*
B45196E6105+20*
● Preliminary Data
*=
Code number for reel diameter
6 = 330-mm reel
9 = 180-mm reel
Please read Important notes and
Cautions and warnings at the end of this document.
+ = Capacitance tolerance
M = ±20%
K = ±10%
Page 15 of 20
B45196E5335+30*
B45196H5475+10* ●
B45196H5475+20*
B45196E5475+30*
B45196H5685+10* ●
B45196H5685+20*
B45196H5685+30*
B45196E5685+40*
B45196H5106+20* ●
B45196H5106+30*
B45196E5106+40*
B45196H5156+20* ●
B45196H5156+30*
B45196E5156+40*
B45196H5226+30*
B45196H5226+40*
B45196H5336+30* ●
B45196H5336+40*
B45196H5336+50*
B45196H5476+40*
B45196H5476+50*
B45196H5686+50*
B45196H5107+50* ●
Tantalum chip capacitors
B45196E, B45198E, B45196H, B45198H
Standard / HighCap
CR
Case size
(20 °C, 120 Hz)
DFmax
Ileak,max
(20 °C, 120 Hz) (20 °C, VR,
5 min)
µF
%
µA
1.5
A
0.5
6
1.5
B
0.5
6
1.5
C
0.6
6
2.2
A
0.8
6
2.2
B
0.8
6
2.2
C
0.8
6
3.3
B
1.2
6
3.3
C
1.2
6
4.7
B
1.6
6
4.7
C
1.6
6
4.7
D
1.7
6
6.8
C
2.4
6
6.8
D
2.4
6
C
3.5
10
6
D
3.5
10
6
C
5.3
15
6
D
5.3
15
6
D
7.7
22
6
E
7.7
22
6
D
11.6
33
8
E
12.0
33
6
E
16.0
47
6
VR (up to 85 °C) = 50 VDC, VR (up to 125 °C) = 33 VDC
0.1
A
0.5
4
0.15
A
0.5
4
0.15
B
0.5
4
0.22
A
0.5
4
0.22
B
0.5
4
0.33
B
0.5
4
0.47
B
0.5
4
0.47
C
0.5
4
0.68
C
0.5
4
C
0.5
1
4
1.5
C
0.8
6
Zmax
(20 °C,
100 kHz)
Ω
7.5
6.0
4.8
4.5
4.0
3.2
3.5
2.4
3.1
2.0
1.5
1.8
1.2
1.6
1.0
1.4
0.8
0.8
0.8
0.9
0.8
0.9
Ordering code
27.0
22.0
22.0
18.0
18.0
14.0
9.0
7.2
6.4
4.8
4.4
B45196E7104+10*
B45196H7154+10*
B45196E7154+20*
B45196H7224+10*
B45196E7224+20*
B45196E7334+20*
B45196H7474+20*
B45196E7474+30*
B45196E7684+30*
B45196E7105+30*
B45196H7155+30*
● Preliminary Data
*=
Code number for reel diameter
6 = 330-mm reel
9 = 180-mm reel
Please read Important notes and
Cautions and warnings at the end of this document.
+ = Capacitance tolerance
M = ±20%
K = ±10%
Page 16 of 20
B45196H6155+10* ●
B45196H6155+20*
B45196E6155+30*
B45196H6225+10* ●
B45196H6225+20*
B45196E6225+30*
B45196H6335+20*
B45196E6335+30*
B45196H6475+20* ●
B45196H6475+30*
B45196E6475+40*
B45196H6685+30*
B45196E6685+40*
B45196H6106+30*
B45196E6106+40*
B45196H6156+30* ●
B45196H6156+40*
B45196H6226+40*
B45196H6226+50*
B45196H6336+40* ●
B45196H6336+50*
B45196H6476+50*
Tantalum chip capacitors
B45196E, B45198E, B45196H, B45198H
Standard / HighCap
CR
Case size
(20 °C, 120 Hz)
µF
1.5
2.2
2.2
3.3
3.3
4.7
6.8
6.8
10
10
15
D
C
D
C
D
D
D
E
D
E
E
DFmax
Ileak,max
(20 °C, 120 Hz) (20 °C, VR,
5 min)
%
µA
0.8
6
1.1
6
1.1
6
1.7
6
1.7
6
2.4
6
3.4
6
3.4
6
5.0
8
5.0
6
7.5
6
Zmax
(20 °C,
100 kHz)
Ω
4.0
3.2
2.8
2.5
1.6
1.2
0.8
0.8
0.8
0.8
0.9
● Preliminary Data
*=
Code number for reel diameter
6 = 330-mm reel
9 = 180-mm reel
Please read Important notes and
Cautions and warnings at the end of this document.
+ = Capacitance tolerance
M = ±20%
K = ±10%
Page 17 of 20
Ordering code
B45196E7155+40*
B45196H7225+30*
B45196E7225+40*
B45196H7335+30*
B45196E7335+40*
B45196E7475+40*
B45196H7685+40*
B45196H7685+50*
B45196H7106+40* ●
B45196H7106+50*
B45196H7156+50*
Tantalum chip capacitors
B45196E, B45198E, B45196H, B45198H
Standard / HighCap
Cautions and warnings
When using tantalum capacitors with a manganese dioxide coating, the following cautions and
warnings should be taken into account:
Polarity
Because tantalum capacitors are polar capacitors, it is important to observe their polarity
markings (positive pole on the anode, negative pole on the cathode). Any incorrect polarity
resulting from the sum of the AC and DC voltage components must be smaller than or equal to
the permitted polarity reversal voltage. To avoid reducing their reliability, this voltage may only
occur for a short time, at most five times for a duration of one minute per hour.
Voltage
The maximum continuous voltage depends on the ambient temperature. Within the temperature
range of 55 to +85 °C, the rated voltage is equal to the maximum continuous voltage. Between
+ 85 and + 125 °C the maximum continuous voltage must be reduced linearly from the full rated
voltage to 2/3 of it (derating). At 150 °C (only B4519*P series) the voltage must be reduced to 1/2
and at 175 °C (only B4519*T series) to 1/3 of the rated voltage. Operation below the maximum
continuous voltage has a positive effect on the capacitor’s failure rate. The maximum continuous
voltage must not be exceeded.
All unfavourable operating conditions (such as possible line overvoltages, unfavourable
tolerances of the transformation ratio of the line transformer in the equipment, repeated
overvoltages when the equipment is switched on, high ambient temperatures) must be taken into
account when determining the operating voltage.
The surge voltage is the maximum voltage (peak value) that may be applied to the capacitor for
short periods, at most five times for a total duration of up to 1 minute per hour. The surge voltage
must not be applied for periodic charging and discharging in the course of normal operation and
cannot be part of the operating voltage. The permissible surge voltage for all capacitors in this
data book is 1.3 x the rated voltage. The occurrence of voltage impulses (transient voltages) that
exceed the surge voltage may lead to irreparable damage.
Capacitance
The actual capacitance of a capacitor can deviate from the rated capacitance by as much as the
full magnitude of the tolerance at delivery. The capacitance varies with the temperature (at
+125 °C +12% up to +20%) and decreases with increasing frequency.
Please read Important notes and
Cautions and warnings at the end of this document.
Page 18 of 20
Tantalum chip capacitors
B45196E, B45198E, B45196H, B45198H
Standard / HighCap
Low-resistance applications and voltage networks
For low-resistance applications, KEMET recommends a maximum operating voltage of half the
permissible maximum continuous voltage, so that the capacitors have sufficient tolerance to
withstand voltage peaks. Depending on the conditions of use, the early failure rate is higher here
by a factor of 2 to 20 than in the range with a constant failure rate as specified in the data book.
When operated directly in a voltage network, the capacitor should be protected against
overvoltage, e.g. by a suppressor diode, and against polarity reversal by a diode. If a capacitor is
operated in an unprotected low-impedance circuit and fails because the permissible conditions for
the forward DC voltage, reverse DC voltage, surge current, power dissipation or temperature are
exceeded, the continued current flow through the overstressed capacitor may produce
overheating. The overheated capacitor may damage the surrounding components and the circuit
board.
Storage conditions
Capacitors with solid electrolyte may be stored at temperatures down to –80 °C. The upper
storage temperature must not exceed +85 °C (for blister tape the temperature limit is +40 °C).
The storage conditions should not exceed +40 °C and 70% R. H. A drypack is useful to prevent
the effects of humidity.
Please read Important notes and
Cautions and warnings at the end of this document.
Page 19 of 20
Important notes
The following applies to all products named in this publication:
1. Some parts of this publication contain statements about the suitability of our products for
certain areas of application. These statements are based on our knowledge of typical requirements that are often placed on our products in the areas of application concerned. We
nevertheless expressly point out that such statements cannot be regarded as binding
statements about the suitability of our products for a particular customer application.
As a rule, KEMET is either unfamiliar with individual customer applications or less familiar
with them than the customers themselves. For these reasons, it is always ultimately incumbent on the customer to check and decide whether a KEMET product with the properties described in the product specification is suitable for use in a particular customer application.
2. We also point out that in individual cases, a malfunction of passive electronic components or failure before the end of their usual service life cannot be completely ruled out
in the current state of the art, even if they are operated as specified. In customer applications requiring a very high level of operational safety and especially in customer applications
in which the malfunction or failure of a passive electronic component could endanger human
life or health (e.g. in accident prevention or life-saving systems), it must therefore be ensured
by means of suitable design of the customer application or other action taken by the customer
(e.g. installation of protective circuitry or redundancy) that no injury or damage is sustained by
third parties in the event of malfunction or failure of a passive electronic component.
3. The warnings, cautions and product-specific notes must be observed.
4. In order to satisfy certain technical requirements, some of the products described in this
publication may contain substances subject to restrictions in certain jurisdictions (e.g.
because they are classed as “hazardous”). Should you have any more detailed questions,
please contact our sales offices.
5. We constantly strive to improve our products. Consequently, the products described in this
publication may change from time to time. The same is true of the corresponding product
specifications. Please check therefore to what extent product descriptions and specifications
contained in this publication are still applicable before or when you place an order.
We also reserve the right to discontinue production and delivery of products. Consequently, we cannot guarantee that all products named in this publication will always be
available.
6. Unless otherwise agreed in individual contracts, all orders are subject to the current version of the “General Terms of Delivery for Products and Services in the Electrical Industry” published by the German Electrical and Electronics Industry Association
(ZVEI).
Page 20 of 20
Similar pages