IDT IDT74FCT573TQB Fast cmos octal transparent latch Datasheet

IDT54/74FCT573T/AT/CT
FAST CMOS OCTAL TRANSPARENT LATCH
MILITARY AND INDUSTRIAL TEMPERATURE RANGES
FAST CMOS OCTAL
TRANSPARENT LATCH
FEATURES:
•
•
•
•
•
•
•
•
•
IDT54/74FCT573T/AT/CT
DESCRIPTION:
Std., A, and C grades
Low input and output leakage ≤1µA (max.)
CMOS power levels
True TTL input and output compatibility:
– VOH = 3.3V (typ.)
– VOL = 0.3V (typ.)
High Drive outputs (-15mA IOH, 48mA IOL)
Meets or exceeds JEDEC standard 18 specifications
Military product compliant to MIL-STD-883, Class B and DESC
listed (dual marked)
Power off disable outputs permit "live insertion"
Available in the following packages:
– Industrial: SOIC, SSOP, QSOP, TSSOP
– Military: CERDIP, LCC
The FCT573Tis an octal transparent latch built using an advanced dual
metal CMOS technology. These octal latches have 3-state outputs and are
intended for bus oriented applications. The flip-flops appear transparent to
the data when Latch Enable (LE) is high. When LE is low, the data that meets
the set-up time is latched. Data appears on the bus when the Output Enable
(OE) is low. When OE is high, the bus output is in the high-impedance state.
FUNCTIONAL BLOCK DIAGRAM
D0
D2
D1
D
D3
D
D
O
D
O
G
D7
D
D
O
G
G
D6
D5
D
O
O
G
D4
D
O
O
G
O
G
G
G
LE
OE
O0
O1
O2
O3
The IDT logo is a registered trademark of Integrated Device Technology, Inc.
MILITARY AND INDUSTRIAL TEMPERATURE RANGES
O4
O5
O6
O7
JUNE 2002
1
© 2002 Integrated Device Technology, Inc.
DSC-5948/3
IDT54/74FCT573T/AT/CT
FAST CMOS OCTAL TRANSPARENT LATCH
MILITARY AND INDUSTRIAL TEMPERATURE RANGES
D0
2
19
O0
D1
3
18
O1
D2
4
17
O2
D3
5
16
D4
6
D5
INDEX
2
1
16
O3
O4
D5
7
15
O4
14
O5
D6
8
14
O5
8
13
O6
9
12
O7
10
11
LE
15
7
D6
D7
9
10
11
Description
PIN DESCRIPTION
Unit
VTERM(2) Terminal Voltage with Respect to GND
–0.5 to +7
V
VTERM(3) Terminal Voltage with Respect to GND
–0.5 to VCC+0.5
V
TSTG
Storage Temperature
–65 to +150
°C
IOUT
DC Output Current
–60 to +120
mA
Pin Names
Dx
LE
OE
Ox
NOTES:
1. Stresses greater than those listed under ABSOLUTE MAXIMUM RATINGS may cause
permanent damage to the device. This is a stress rating only and functional operation
of the device at these or any other conditions above those indicated in the operational
sections of this specification is not implied. Exposure to absolute maximum rating
conditions for extended periods may affect reliability. No terminal voltage may exceed
Vcc by +0.5V unless otherwise noted.
2. Inputs and Vcc terminals only.
3. Output and I/O terminals only.
Typ.
Max.
Dx
H
L
X
CIN
Input Capacitance
VIN = 0V
6
10
pF
Output Capacitance
VOUT = 0V
8
12
pF
Inputs
LE
H
H
X
NOTE:
1. H = HIGH Voltage Level
X = Don’t Care
L = LOW Voltage Level
Z = High Impedance
Unit
COUT
Description
Data Inputs
Latch Enable Input (Active HIGH)
Output Enable Input (Active LOW)
3-State Outputs
FUNCTION TABLE(1)
CAPACITANCE (TA = +25°C, F = 1.0MHz)
Conditions
13
LCC
TOP VIEW
Max
Parameter(1)
12
O6
6
O7
D4
O3
LE
O2
GND
17
D7
5
D3
ABSOLUTE MAXIMUM RATINGS(1)
Symbol
19
O1
CERDIP/ SOIC/ SSOP/ QSOP/ TSSOP
TOP VIEW
Symbol
20
18
D2
4
GND
3
O0
VCC
VCC
20
OE
1
D0
OE
D1
PIN CONFIGURATION
NOTE:
1. This parameter is measured at characterization but not tested.
2
OE
L
L
H
Outputs
Ox
H
L
Z
IDT54/74FCT573T/AT/CT
FAST CMOS OCTAL TRANSPARENT LATCH
MILITARY AND INDUSTRIAL TEMPERATURE RANGES
DC ELECTRICAL CHARACTERISTICS OVER OPERATING RANGE
Following Conditions Apply Unless Otherwise Specified:
Industrial: TA = –40°C to +85°C, VCC = 5.0V ±5%; Military: TA = –55°C to +125°C, VCC = 5.0V ±10%
Symbol
Test Conditions(1)
Parameter
Min.
Typ.(2)
Max.
Unit
VIH
Input HIGH Level
Guaranteed Logic HIGH Level
2
—
—
V
VIL
Input LOW Level
Guaranteed Logic LOW Level
—
—
0.8
V
IIH
Input HIGH Current(4)
VCC = Max.
VI = 2.7V
—
—
±1
µA
IIL
Input LOW Current(4)
VCC = Max.
VI = 0.5V
—
—
±1
µA
IOZH
High Impedance Output Current
VCC = Max
VO = 2.7V
—
—
±1
µA
IOZL
(3-State output pins)(4)
VO = 0.5V
—
—
±1
II
VIK
VH
Input HIGH Current(4)
Clamp Diode Voltage
Input Hysteresis
VCC = Max., VI = VCC (Max.)
VCC = Min, IIN = -18mA
—
—
—
—
–0.7
200
±1
–1.2
—
µA
V
mV
ICC
Quiescent Power Supply Current
VCC = Max., VIN = GND or VCC
—
0.01
1
mA
Min.
2.4
Typ.(2)
3.3
Max.
—
Unit
2
3
—
—
0.3
0.5
V
–60
–120
–225
mA
—
—
±1
µA
—
OUTPUT DRIVE CHARACTERISTICS
VOL
Output LOW Voltage
IOS
Short Circuit Current
Test Conditions(1)
VCC = Min
IOH = –6mA MIL
VIN = VIH or VIL
IOH = –8mA IND
IOH = –12mA MIL
IOH = –15mA IND
VCC = Min
IOL = 32mA MIL
VIN = VIH or VIL
IOL = 48mA IND
VCC = Max., VO = GND(3)
IOFF
Input/Output Power Off Leakage(5)
VCC = 0V, VIN or VO ≤ 4.5V
Symbol
VOH
Parameter
Output HIGH Voltage
V
NOTES:
1. For conditions shown as Min. or Max., use appropriate value specified under Electrical Characteristics for the applicable device type.
2. Typical values are at VCC = 5.0V, +25°C ambient.
3. Not more than one output should be tested at one time. Duration of the test should not exceed one second.
4. The test limit for this parameter is ±5µA at TA = –55°C.
5. This parameter is guaranteed but not tested.
3
IDT54/74FCT573T/AT/CT
FAST CMOS OCTAL TRANSPARENT LATCH
MILITARY AND INDUSTRIAL TEMPERATURE RANGES
POWER SUPPLY CHARACTERISTICS
Test Conditions(1)
Min.
Typ.(2)
Max.
Unit
—
0.5
2
mA
VIN = VCC
VIN = GND
—
0.15
0.25
mA/
MHz
VCC = Max.
Outputs Open
fi = 10MHz
50% Duty Cycle
OE = GND
LE = VCC
One Bit Toggling
VIN = VCC
VIN = GND
—
1.5
3.5
mA
VIN = 3.4V
VIN = GND
—
1.8
4.5
VCC = Max.
Outputs Open
fi = 2.5MHz
50% Duty Cycle
OE = GND
LE = VCC
Eight Bits Toggling
VIN = VCC
VIN = GND
—
3
6(5)
VIN = 3.4V
VIN = GND
—
5
14(5)
Symbol
Parameter
∆ICC
Quiescent Power Supply Current
TTL Inputs HIGH
VCC = Max.
VIN = 3.4V(3)
ICCD
Dynamic Power Supply
Current(4)
VCC = Max.
Outputs Open
OE = GND
One Input Toggling
50% Duty Cycle
Total Power Supply Current(6)
IC
NOTES:
1. For conditions shown as Min. or Max., use appropriate value specified under Electrical Characteristics for the applicable device type.
2. Typical values are at VCC = 5.0V, +25°C ambient.
3. Per TTL driven input; (VIN = 3.4V). All other inputs at VCC or GND.
4. This parameter is not directly testable, but is derived for use in Total Power Supply Calculations.
5. Values for these conditions are examples of ∆ICC formula. These limits are guaranteed but not tested.
6. IC = IQUIESCENT + IINPUTS + IDYNAMIC
IC = ICC + ∆ICC DHNT + ICCD (fCP/2+ fiNi)
ICC = Quiescent Current
∆ICC = Power Supply Current for a TTL High Input (VIN = 3.4V)
DH = Duty Cycle for TTL Inputs High
NT = Number of TTL Inputs at DH
ICCD = Dynamic Current caused by an Input Transition Pair (HLH or LHL)
fCP = Clock Frequency for Register Devices (Zero for Non-Register Devices)
fi = Output Frequency
Ni = Number of Outputs at fi
All currents are in milliamps and all frequencies are in megahertz.
4
mA
IDT54/74FCT573T/AT/CT
FAST CMOS OCTAL TRANSPARENT LATCH
MILITARY AND INDUSTRIAL TEMPERATURE RANGES
SWITCHING CHARACTERISTICS OVER OPERATING RANGE - INDUSTRIAL
74FCT573AT
Symbol
Parameter
74FCT573CT
Condition(1)
Min.(2)
Max.
Min.(2)
Max.
Unit
1.5
5.2
1.5
4.2
ns
2
8.5
2
5.5
ns
tPLH
Propagation Delay
CL = 50pF
tPHL
Dx to Ox
RL = 500Ω
tPLH
Propagation Delay
tPHL
LE to Ox
tPZH
Output Enable Time
1.5
6.5
1.5
5.5
ns
Output Disable Time
1.5
5.5
1.5
5
ns
2
—
2
—
ns
1.5
—
1.5
—
ns
5
—
5
—
ns
tPZL
tPHZ
tPLZ
tSU
Set-up Time, HIGH or LOW
Dx to LE
tH
Hold Time, HIGH or LOW
Dx to LE
tW
LE Pulse Width HIGH(3)
SWITCHING CHARACTERISTICS OVER OPERATING RANGE - MILITARY
54FCT573T
Symbol
Parameter
54FCT573AT
54FCT573CT
Condition(1)
Min.(2)
Max.
Min.(2)
Max.
Min.(2)
Max.
Unit
1.5
8.5
1.5
5.6
1.5
5.1
ns
2
15
2
9.8
2
8
ns
tPLH
Propagation Delay
CL = 50pF
tPHL
Dx to Ox
RL = 500Ω
tPLH
Propagation Delay
tPHL
LE to Ox
tPZH
Output Enable Time
1.5
13.5
1.5
7.5
1.5
6.3
ns
Output Disable Time
1.5
10
1.5
6.5
1.5
5.9
ns
2
—
2
—
2
—
ns
1.5
—
1.5
—
1.5
—
ns
6
—
6
—
6
—
ns
tPZL
tPHZ
tPLZ
tSU
Set-up Time, HIGH or LOW
Dx to LE
tH
Hold Time, HIGH or LOW
Dx to LE
tW
LE Pulse Width HIGH(3)
NOTES:
1. See test circuit and waveforms.
2. Minimum limits are guaranteed but not tested on Propagation Delays.
3. This limit is guaranteed but not tested.
5
IDT54/74FCT573T/AT/CT
FAST CMOS OCTAL TRANSPARENT LATCH
MILITARY AND INDUSTRIAL TEMPERATURE RANGES
TEST CIRCUITS AND WAVEFORMS
V CC
SWITCH POSITION
7.0V
500Ω
V OUT
VIN
Pulse
Generator
D.U.T
.
50pF
RT
500Ω
Test
Switch
Open Drain
Disable Low
Enable Low
Closed
All Other Tests
Open
DEFINITIONS:
CL = Load capacitance: includes jig and probe capacitance.
RT = Termination resistance: should be equal to ZOUT of the Pulse Generator.
CL
Octal link
Test Circuits for All Outputs
DATA
INPUT
tH
tSU
TIMING
INPUT
ASYNCHRONOUS CONTROL
PRESET
CLEAR
ETC.
SYNCHRONOUS CONTROL
PRESET
CLEAR
CLOCK ENABLE
ETC.
3V
1.5V
0V
3V
1.5V
0V
tREM
tSU
LOW-HIGH-LOW
PULSE
tW
3V
1.5V
0V
HIGH-LOW-HIGH
PULSE
3V
1.5V
0V
tH
1.5V
1.5V
Octal link
Pulse Width
Octal link
Set-Up, Hold, and Release Times
ENABLE
SAME PHASE
INPUT TRANSITION
tPLH
tPHL
OUTPUT
tPLH
OPPOSITE PHASE
INPUT TRANSITION
tPHL
3V
1.5V
0V
DISABLE
3V
1.5V
CONTROL
INPUT
OUTPUT
NORMALLY
LOW
3V
1.5V
0V
OUTPUT
NORMALLY
HIGH
Octal link
SWITCH
CLOSED
tPZH
SWITCH
OPEN
0V
tPLZ
tPZL
VOH
1.5V
VOL
3.5V
3.5V
1.5V
0.3V
VOL
tPHZ
0.3V
1.5V
0V
VOH
0V
Octal link
Propagation Delay
Enable and Disable Times
NOTES:
1. Diagram shown for input Control Enable-LOW and input Control Disable-HIGH.
2. Pulse Generator for All Pulses: Rate ≤ 1.0MHz; tF ≤ 2.5ns; tR ≤ 2.5ns.
6
IDT54/74FCT573T/AT/CT
FAST CMOS OCTAL TRANSPARENT LATCH
MILITARY AND INDUSTRIAL TEMPERATURE RANGES
ORDERING INFORMATION
XXXX
IDT
XX
FCT
Device Type
Temp. Range
XX
Package
X
Process
Blank
B
Industrial
MIL-STD-883, Class B
SO
PY
Q
PG
Industrial Options
Small Outline IC
Shrink Small Outline Package
Quarter-size Small Outline Package
Think Shrink Small Outline Package
D
L
Military Options
CERDIP
Leadless Chip Carrier
573T
573AT
573CT
Fast CMOS Octal Transparent Latch
54
74
– 55°C to +125°C
– 40°C to +85°C
DATA SHEET DOCUMENT HISTORY
6/24/2002 Updated as per PDNs Logic-00-07 and Logic-01-04
CORPORATE HEADQUARTERS
2975 Stender Way
Santa Clara, CA 95054
for SALES:
800-345-7015 or 408-727-6116
fax: 408-492-8674
www.idt.com
7
for Tech Support:
[email protected]
(408) 654-6459
Similar pages