5030 POWER INDUCTORS High-Reliability Power Inductors ML466PJB ■ High temperature materials allow operation in ambient temperatures up to 155°C. ■ Special construction allows it to pass vibration testing to 80 G and shock testing to 1000 G. Core material Ferrite Terminations Silver-palladium-platinum-glass frit Weight 226 – 244 mg Ambient temperature –55°C to +105°C with Irms current, +105°C to +155°C with derated current Storage temperature Component: –55°C to +155°C. Packaging: –55°C to +80°C Resistance to soldering heat Max three 40 second reflows at +260°C, parts cooled to room temperature between cycles Moisture Sensitivity Level (MSL) 1 (unlimited floor life at <30°C / 85% relative humidity) Enhanced crush-resistant packaging 750/7″reel Plastic tape: 12 mm wide, 0.32 mm thick, 8 mm pocket spacing, 3.1 mm pocket depth Recommended pick and place nozzle OD: 5 mm; ID: ≤ 2.5 mm Inductance2 Part number1 ±20% (µH) ML466PJB901MLZ 0.90 ML466PJB122MLZ 1.2 ML466PJB172MLZ 1.7 ML466PJB222MLZ 2.2 ML466PJB332MLZ 3.3 ML466PJB472MLZ 4.7 ML466PJB562MLZ 5.6 ML466PJB682MLZ 6.8 ML466PJB822MLZ 8.2 ML466PJB103MLZ 10.0 ML466PJB123MLZ 12.0 ML466PJB153MLZ 15.0 ML466PJB183MLZ 18.0 ML466PJB223MLZ 22.0 ML466PJB333MLZ 33.0 ML466PJB473MLZ 47.0 ML466PJB683MLZ 68.0 ML466PJB823MLZ 82.0 ML466PJB104MLZ 100 ML466PJB124MLZ 120 ML466PJB154MLZ 150 ML466PJB224MLZ 220 ML466PJB334MLZ 330 ML466PJB474MLZ 470 ML466PJB564MLZ 560 ML466PJB684MLZ 680 ML466PJB105MLZ 1000 ML466PJB155MLZ 1500 ML466PJB185MLZ 1800 ML466PJB225MLZ 2200 ML466PJB335MLZ 3300 ML466PJB475MLZ 4700 Isat (A)5 Irms (A)6 DCR 4 max3 SRF (MHz) 10% 20% 30% 20°C 40°C (Ohms) min typ drop drop drop rise rise 0.040 175 250 3.8 4.0 4.1 1.7 2.2 0.043 147 210 3.5 3.6 3.7 1.6 2.1 0.051 133 190 3.0 3.2 3.3 1.5 2.0 0.057 118 168 2.9 3.1 3.2 1.3 1.7 0.066 88 125 2.3 2.5 2.6 1.1 1.4 0.083 59 84 1.9 2.0 2.0 1.0 1.4 0.089 49 70 1.8 1.8 1.9 1.0 1.3 0.099 39 56 1.6 1.7 1.7 1.0 1.3 0.125 32 45 1.6 1.7 1.7 0.88 1.2 0.127 21 30 1.4 1.4 1.4 0.80 1.2 0.155 17 24 1.3 1.4 1.4 0.76 1.1 0.160 22 32 0.80 0.90 0.90 0.74 1.1 0.170 19 27 0.80 0.82 0.87 0.72 1.0 0.190 17 24 0.70 0.75 0.78 0.70 1.0 0.260 13 19 0.60 0.63 0.64 0.68 0.96 0.330 11.0 16 0.50 0.53 0.55 0.60 0.80 0.440 8.4 12 0.40 0.43 0.44 0.52 0.72 0.470 7.7 11 0.38 0.40 0.40 0.48 0.66 0.600 7.0 10 0.27 0.31 0.32 0.44 0.60 0.800 6.3 9.0 0.26 0.29 0.30 0.36 0.53 0.860 5.3 7.5 0.22 0.25 0.263 0.34 0.46 1.35 4.2 6.0 0.21 0.235 0.245 0.29 0.40 1.80 3.5 5.0 0.155 0.155 0.200 0.26 0.34 2.80 2.8 4.0 0.117 0.134 0.146 0.22 0.30 3.20 2.5 3.6 0.110 0.130 0.140 0.18 0.26 3.80 2.1 3.0 0.100 0.120 0.126 0.16 0.23 5.10 1.8 2.5 0.100 0.110 0.110 0.14 0.20 7.60 1.4 2.0 0.068 0.080 0.089 0.12 0.17 10.0 1.3 1.8 0.069 0.081 0.086 0.10 0.14 11.0 1.1 1.6 0.063 0.074 0.080 0.080 0.12 19.5 0.90 1.3 0.056 0.063 0.067 0.070 0.10 26.0 0.80 1.1 0.049 0.056 0.059 0.065 0.090 ® ML466PJB475MLZ Testing: Z = COTS H = Screening per Coilcraft CP-SA-10001 N = Screening per Coilcraft CP-SA-10004 2. Inductance tested at 100 kHz, 0.1 Vrms using an Agilent/HP 4192A. 3. DCR measured on a micro-ohmmeter. 4. SRF measured using an Agilent/HP 8753ES or equivalent. 5. Typical DC current that causes the specified inductance drop from its value without current. 6. Typical current that causes the specified temperature rise from 25°C ambient. 7. Electrical specifications at 25°C. Refer to Doc 362 “Soldering Surface Mount Components” before soldering. These parts are preproduction products for electrical evaluation only. Document ML581-1 Specification subject to change without notice. 1102 Silver Lake Road Cary IL 60013 © Coilcraft, Inc. 2011 1. When ordering, please specify testing code: Phone 800-981-0363 Fax 847-639-1508 Revised 07/18/11 E-mail [email protected] Web www.coilcraft-cps.com 5030 POWER INDUCTORS ML466PJB Series (5030) Typical L vs Frequency Typical L vs Current 10000 10000 3300 µH 3300 µH 1000 µH 330 µH 100 µH 100 1000 µH 1000 Inductance (µH) Inductance (µH) 1000 33 µH 10 µH 10 330 µH 100 µH 100 33 µH 10 µH 10 3.3 µH 3.3 µH 1 0.01 1 0.1 1 1 10 These parts are preproduction products for electrical evaluation only. Document ML581-2 Specification subject to change without notice. Revised 07/18/11 Frequency (MHz) 10 0.01 0.1 Current (A) Typical Current Derating Dimensions are in ® 1102 Silver Lake Road Cary IL 60013 © Coilcraft, Inc. 2011 inches mm Phone 800-981-0363 Fax 847-639-1508 E-mail [email protected] Web www.coilcraft-cps.com