ALUMINUM ELECTROLYTIC CAPACITORS LAS Expanded Snap-in Terminal Type, 105°C Permissible Abnormal Voltage, Smaller-sized Withstanding 2000 hours application of rated ripple current of 105°C. Addition of 450V rated voltage. Smaller case sizes and higher ripple current than LAQ. Improved safety features for abnormally excessive voltage. Ideally suited for the equipment used at voltage fluctuating area. Compliant to the RoHS directive (2011/65/EU). LAQ Smaller LAS Specifications Performance Characteristics Item Category Temperature Range –25 to +105°C Rated Voltage Range 400 • 420 • 450V Rated Capacitance Range 56 to3 390µF CV Capacitance Tolerance ± 20% 120Hz, 20°C 3 at CV 3 CV (µA) (After 5 minutes' application of rated voltage) [C : Rated Capacitance (µF) V : Voltage (V)] Leakage Current Tangent of loss angle (tan δ) 0.20MAX. 120Hz at 20°C Rated voltage(V) Impedance ratio (MAX) Z – 25°C/Z+20°C Stability at Low Temperature 400・420・450 8 Measurement frequency : 120Hz The specifications listed at right shall be met when the capacitors are restored to 20°C after D.C. bias plus rated ripple current is applied for 2000 hours at 105°C, the peak voltage shall not exceed the rated voltage. Capacitance change Endurance After storing the capacitors under no load at 105°C for 1000 hours and then performing voltage treatment based on JIS C 5101-4 clause 4.1 at 20°C, they shall meet the requirements listed at right. Capacitance change Shelf Life Safety Performance The pressure relief vent will operate in normal conditions, with no dangerous conditions such as flames, ignitions or dispersion of pieces of the capacitor and / or case. Rating Test conditions Voltage (V) Rated Capacitance (µF) Limited DC current Test voltage 2A 330 C < 100 100 C < 220 400 500VDC and 600VDC 4A 220 C < 470 7A 2A 330 C < 100 100 C < 220 520VDC and 630VDC 4A 420 7A 220 C < 470 2A 330 C < 100 100 C < 220 550VDC and 675VDC 4A 450 7A 220 C < 470 Marking Printed with white color letter on black sleeve Drawing tan δ Leakage current tan δ Leakage current Within ±20% of the initial capacitance value 200% or less than the initial specified value Less than or equal to the initial specified value Within ±15% of the initial capacitance value 150% or less than the initial specified value Less than or equal to the initial specified value Type numbering system (Example : 400V 100µF) Polarity bar Bottom plate (code ZB only) Sleeve (P.E.T.) 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 φD +1.5MAX. L AS 2 G 1 0 1 M E L Z 2 5 Bottom Plate Case length code L±2 4.0±0.5 Case dia. code （1 0） Configuration Capacitance tolerance (±20%) Pressure relief vent Rated capacitance (100µF) Rated voltage (400V) 4.0±0.5 （2.5） 0.8 +0.2 -0.1 Series name 0.8 Type Please contact to us if other configurations are required. 1.5 (PC board hole dimensions) .2 +0 .1 -0 +0.2 -0.1 (Terminal dimensions) Frequency coefficient of rated ripple current Coeff. Frequency (Hz) 400 · 420 · 450V φD 22 25 30 35 50 0.88 Minimum order quantity : 50pcs. Dimension table in next page. 60 0.9 120 1.00 1k 1.10 10k or more 1.15 Code Z A B C ZB code less With Bottom Plate Without Bottom Plate ALUMINUM ELECTROLYTIC CAPACITORS LAS Dimensions Cap. (µF) 56 68 82 100 120 150 180 Size φD × L(mm) 22 × 20 400V(2G) Ripple Leakage Current (mA) (mArms) 450 0.44 LAS2G560MELZ20 Cap. (µF) 56 68 Code 22 × 20 22 × 25 510 0.49 LAS2G680MELZ20 640 0.54 LAS2G820MELZ25 22 × 25 22 × 30 680 0.60 LAS2G101MELZ25 760 0.65 LAS2G121MELZ30 25 × 25 22 × 35 760 0.65 LAS2G121MELA25 880 0.73 LAS2G151MELZ35 25 × 30 30 × 25 880 0.73 LAS2G151MELA30 880 0.73 LAS2G151MELB25 22 × 40 25 × 30 950 0.80 LAS2G181MELZ40 950 0.80 LAS2G181MELA30 950 0.80 LAS2G181MELB25 1240 0.88 LAS2G221MELA35 30 × 30 25 × 40 1240 0.88 LAS2G221MELB30 1300 0.98 LAS2G271MELA40 30 × 35 30 × 35 1300 0.98 LAS2G271MELB35 330 1440 1.08 LAS2G331MELB35 390 30 × 40 1550 1.18 LAS2G391MELB40 220 270 30 × 25 25 × 35 82 100 120 150 180 220 270 330 390 Cap. (µF) 68 Size φD × L(mm) 22 × 25 450V (2W) Ripple Leakage Current (mA) (mArms) 600 0.52 Code LAS2W680MELZ25 22 × 30 650 0.57 LAS2W820MELZ30 25 × 25 610 0.57 LAS2W820MELA25 22 × 30 710 0.63 LAS2W101MELZ30 25 × 25 710 0.63 LAS2W101MELA25 22 × 35 770 0.69 LAS2W121MELZ35 25 × 30 760 0.69 LAS2W121MELA30 30 × 25 770 0.69 LAS2W121MELB25 25 × 35 880 0.77 LAS2W151MELA35 30 × 25 880 0.77 LAS2W151MELB25 180 30 × 30 970 0.85 LAS2W181MELB30 220 30 × 35 1300 0.94 LAS2W221MELB35 270 35 × 30 1300 1.04 LAS2W271MELC30 330 35 × 35 1400 1.15 LAS2W331MELC35 82 100 120 150 Rated ripple current (mArms) at 105°C 120Hz Size φD × L(mm) 22 × 25 420V(W6) Ripple Leakage Current (mA) (mArms) Code 380 0.46 LASW6560MELZ25 22 × 25 22 × 30 450 0.50 LASW6680MELZ25 640 0.55 LASW6820MELZ30 25 × 25 22 × 30 640 0.55 LASW6820MELA25 690 0.61 LASW6101MELZ30 25 × 25 22 × 35 690 0.61 LASW6101MELA25 750 0.67 LASW6121MELZ35 25 × 30 30 × 25 750 0.67 LASW6121MELA30 750 0.67 LASW6121MELB25 22 × 40 25 × 35 820 0.75 LASW6151MELZ40 820 0.75 LASW6151MELA35 30 × 25 25 × 40 820 0.75 LASW6151MELB25 900 0.82 LASW6181MELA40 30 × 30 35 × 25 900 0.82 LASW6181MELB30 900 0.82 LASW6181MELC25 25 × 45 30 × 35 1000 0.91 LASW6221MELA45 1000 0.91 LASW6221MELB35 35 × 30 30 × 40 1000 0.91 LASW6221MELC30 1100 1.01 LASW6271MELB40 35 × 30 30 × 45 1100 1.01 LASW6271MELC30 1200 1.11 LASW6331MELB45 1200 1.11 LASW6331MELC35 1300 1.21 LASW6391MELC45 35 × 35 35 × 45