Leaded Oscillator, VCXO, TTL / HC-MOS Metal Package, Full Size DIP and Half DIP I212 / I213 Series I203 Package 20.7 Product Features: Applications: CMOS/TTL Compatible Logic Levels Compatible with Leadfree Processing RoHS Compliant Server & Storage Sonet /SDH 802.11 / Wifi T1/E1, T3/E3 4 3 1 2 12.6 7.62 15.24 5.1 Max. 6 Min. Frequency 51.84 MHz to 170.000 MHz Output Level HC-MOS TTL ‘0’ = 0.1 Vcc Max., ‘1’ = 0.9 Vcc Min. ‘0’ = 0.4 VDC Max., ‘1’ = 2.4 VDC Min. Duty Cycle 50% ±5% Rise / Fall Time 10 nS Max.* Output Load HC-MOS TTL Fo < 50 MHz = 10 TTL, Fo > 50 MHz = 5 LSTTL 15 pF Frequency Stability See Frequency Stability Table Supply Voltage See Input Voltage Table, tolerance ±10 % Current 50 mA Max.* Control Voltage 1.65 VDC ±1.5 VDC for Vcc = 3.3 VDC, 2.5 VDC ±2.0 VDC for VCC = 5.0 VDC 0.048 0.36 I202 Package 12.6 4 3 1 2 12.6 7.62 7.62 5.1 Max. 6 Min. Slope Positive Operating See Operating Temperature Table in Part Number Guide Storage Package I212 I213 - 0.36 Dimension Units: mm Pin Connection 1 Control Voltage 2 GND 3 Output 4 Vcc -55° C to +125° C Part Number Guide Operating Temperature 0.48 Frequency Stability Sample Part Number: I212-1BC3-56.000 MHz Pullability Supply Voltage 1 = 0° C to +70° C F = ±20 ppm B = ±50 ppm min. 5 = 5.0 VDC 3 = -20° C to +70° C X = ±30 ppm C = ±100 ppm min. 3 = 3.3 VDC 4 = -30° C to +75° C B = ±50 ppm K = ±150 ppm min. 2 = -40° C to +85° C C = ±100 ppm L = ±200 ppm min. Frequency - 56.000 MHz NOTE: A 0.01 µF bypass capacitor is recommended between Vcc (pin 4) and GND (pin 2) to minimize power supply noise. * Frequency, supply, and load related parameters. ILSI America Phone: 775-851-8880 • Fax: 775-851-8882• e-mail: [email protected] • www.ilsiamerica.com 10/10 Specifications subject to change without notice Page 1 Leaded Oscillator, VCXO, TTL / HC-MOS Metal Package, Full Size DIP and Half DIP I212 / I213 Series Pb Free Solder Reflow Profile: Typical Application: *Units are backward compatible with 240C reflow processes Package Information: MSL = N.A. (package does not contain plastic, storage life is unlimited under normal room conditions). Termination = e4- (Sn / Cu / Ag over Ni over Kovar base metal). Environmental Specifications Thermal Shock Moisture Resistance Mechanical Shock Mechanical Vibration Resistance to Soldering Heat Hazardous Substance Solderability Terminal Strength Gross Leak Fine Leak Solvent Resistance MIL-STD-883, Method 1011, Condition A MIL-STD-883, Method 1004 MIL-STD-883, Method 2002, Condition B MIL-STD-883, Method 2007, Condition A J-STD-020C, Table 5-2 Pb-free devices (except 2 cycles max) Pb-Free / RoHS / Green Compliant JESD22-B102-D Method 2 (Preconditioning E) MIL-STD-883, Method 2004, Test Condition D MIL-STD-883, Method 1014, Condition C MIL-STD-883, Method 1014, Condition A2, R1=2x10-8 atm cc/s MIL-STD-202, Method 215 Marking Line 1: ILSI and Date Code Line 2: XXXX (Part Number detail = I203-XXXX-Freq.) Line 3: Frequency ILSI America Phone: 775-851-8880 • Fax: 775-851-8882• e-mail: [email protected] • www.ilsiamerica.com 10/10 Specifications subject to change without notice Page 2