HiRel Silicon Schottky Diode BAT 14 Features ¥ HiRel Discrete and Microwave Semiconductor ¥ Medium barrier diodes for detector and mixer applications ¥ Hermetically sealed microwave package ¥ qualified ¥ ESA/SCC Detail Spec. No.: 5106/014 ESD: Electrostatic discharge sensitive device, observe handling precautions! T T1 Type BAT 14-013 (ql) Marking - Ordering Code see below Pin Configuration Package T BAT 14-014 (ql) BAT 14-033 (ql) BAT 14-034 (ql) BAT 14-043 (ql) BAT 14-044 (ql) BAT 14-063 (ql) BAT 14-064 (ql) BAT 14-073 (ql) BAT 14-074 (ql) BAT 14-093 (ql) BAT 14-094 (ql) BAT 14-103 (ql) BAT 14-104 (ql) BAT 14-113 (ql) BAT 14-114 (ql) BAT 14-123 (ql) BAT 14-124 (ql) - see below see below see below see below see below see below see below see below see below see below see below see below see below see below see below see below see below see BAT14-013 see BAT14-013 see BAT14-013 see BAT14-013 see BAT14-013 see BAT14-013 see BAT14-013 see BAT14-013 see BAT14-013 see BAT14-013 see BAT14-013 see BAT14-013 see BAT14-013 see BAT14-013 see BAT14-013 see BAT14-013 see BAT14-013 T1 T T1 T T1 T T1 T T1 T T1 T T1 T T1 T T1 - (ql) Quality Level: P: Professional Quality, H: High Rel Quality, S: Space Quality, ES: ESA Space Quality, (see Chapter Order Instructions for ordering example) Semiconductor Group 1 Ordering Code: Q62702D1346 Ordering Code: on request Ordering Code: on request Ordering Code: Q62702D1345 Draft A03 1998-04-01 BAT 14 Table 1 Maximum Ratings Parameter Symbol Limit Values Unit Reverse voltage VR IF 3 V Forward current BAT14-013, -014, -033, -034 BAT14-043, -044, -063, -064 BAT14-073, -074, -093, -094 BAT14-103, -104, -113, -114 BAT14-123, -124 Power dissipation BAT14-013, -014, -033, -034 BAT14-043, -044, -063, -064 BAT14-073, -074, -093, -094 BAT14-103, -104, -113, -114 BAT14-123, -124 Ptot Operating temperature range Top Tstg Tsol EB mW 100 100 50 50 50 Storage temperature range Soldering temperature Burn-out energy 1) BAT14-013, -014, -033, -034 BAT14-043, -044, -063, -064 BAT14-073, -074, -093, -094 BAT14-103, -104, -113, -114 BAT14-123, -124 1) mA 100 100 50 50 50 - 55 to + 150 °C - 65 to + 175 °C + 220 °C Erg 5.0 5.0 2.0 2.0 1.0 Quoted for a single discharge of torry line during the first 2.4 ns current flow in the forward direction. General criterion for burn-out energy is a 3 dB increase in noise figure. Semiconductor Group 2 Draft A03 1998-04-01 BAT 14 Electrical Characteristics DC Characteristics at TA = 25 °C unless otherwise specified Table 2 Parameter Symbol Limit Values min. typ. max. Unit Breakdown voltage IR = 10 mA V(BR) 3 - - V Reverse current IR - - 1 mA VR = 2 V Forward voltage 1 VF1 V IF1 = 0.01 mA - BAT14-013, -014, -033, -034 BAT14-043, -044, -063, -064 BAT14-073, -074, -093, -094 BAT14-103, -104, -113, -114 BAT14-123, -124 Forward voltage 2 IF2 = 1 mA BAT14-013, -014, -033, -034 BAT14-043, -044, -063, -064 BAT14-073, -074, -093, -094 BAT14-103, -104, -113, -114 BAT14-123, -124 VF2 Series resistance 2) IF1 = 10 mA, IF2 = 50 mA BAT14-013, -014 BAT14-033, -034 BAT14-043, -044 BAT14-063, -064 BAT14-073, -074 BAT14-093, -094 BAT14-103, -104 BAT14-113, -114 BAT14-123, -124 RF 2) - 0.31 0.32 0.33 0.35 0.36 V - 0.42 0.44 0.45 0.46 0.48 0.44 0.45 0.46 0.48 0.50 W - 3.0 4.0 3.5 4.5 4.5 5.5 6.0 7.0 8.0 3.5 4.5 4.0 5.0 5.5 6.5 7.0 8.0 9.0 DV F -W R F = -----------------------Ð3 40 ´ 10 Semiconductor Group 3 Draft A03 1998-04-01 BAT 14 Table 3 AC Characteristics at TA = 25 °C unless otherwise specified Parameter Symbol Limit Values min. Total capacitance VR = 0 V, f = 1 MHz BAT14-013, -014, -033, -034 BAT14-043, -044, -063, -064 BAT14-073, -074, -093, -094 BAT14-103, -104, -113, -114 BAT14-123, -124 CT Noise figure I.F. = 30 MHz LO power = 0 dBm LO = 9.375 GHz BAT14-013, -014 BAT14-033, -034 BAT14-043, -044 BAT14-063, -064 BAT14-073, -074 BAT14-093, -094 BAT14-103, -104 BAT14-113, -114 BAT14-123, -124 NF Semiconductor Group typ. Unit max. pF - 0.35 0.30 0.27 0.23 0.20 0.60 0.35 0.30 0.25 0.22 dB - 4 5.3 6.3 5.3 6.3 5.3 6.3 5.7 7.2 8.0 5.5 6.5 5.5 6.5 5.5 6.5 6.0 7.5 9.0 Draft A03 1998-04-01 BAT 14 Order Instructions Full type variant including type variant and quality level must be specified by the orderer. For HiRel Discrete and Microwave Semiconductors the ordering code specifies device family and quality level only. Ordering Form: Ordering Code: QÉ BAT14- (x) (ql) (x): Type Variant (ql): Quality Level Ordering Example: Ordering Code: Q62702D1345 BAT14-014 ES For BAT14-014 in T1 Package; ESA Space Quality Level Further Information See our WWW-Pages: Ð Discrete and RF-Semiconductors (Small Signal Semiconductors) www.siemens.de/semiconductor/products/35/35.htm Ð HiRel Discrete and Microwave Semiconductors www.siemens.de/semiconductor/products/35/353.htm Please contact also our marketing division: Tel.: ++89 6362 4480 Fax.: ++89 6362 5568 e-mail: [email protected] Semiconductor Group 5 Draft A03 1998-04-01 BAT 14 Figure 1 T Package Symbol Millimetre min. max. A 1.30 1.45 B 1.15 1.35 C - 0.4 Semiconductor Group 6 Draft A03 1998-04-01 BAT 14 Figure 2 T1 Package Symbol Millimetre min. max. A 1.30 1.45 B 1.15 1.35 C - 0.40 D 0.10 0.50 E - 0.30 F 0.06 0.10 G 5.50 - H 0.40 0.60 Semiconductor Group 7 Draft A03 1998-04-01