Document 602-1 Shielded Power Inductor – FA2769-AL The FA2769-AL was developed for Enpirion for use in the second stage LC filter for the output of their 6A DC‑DC power modules EN5360D, EN5365Q and EN5366Q, and for their 3A DC-DC power modules EN5330D, EN5335Q, and EN5336Q. This part is designed for applications requiring high current handling capabilities and low DC resistance. Its compact size makes it an excellent choice for use in notebook computers, mobile phones, and other handheld products. For free evaluation samples, contact Coilcraft or order them on-line at www.coilcraft.com. DCR SRF Part Inductance2 max3 typ4 Isat5 Irms6 1 number ±30% (nH) (mOhms) (MHz) (A) (A) FA2769-AL_ 26.0 0.23 210 29 6.5 1. When ordering, please specify packaging code: FA2769-ALC C = 7″ machine-ready reel. EIA-481 embossed plastic tape (750 per full reel). B = Less than full reel. In tape, but not machine ready. To have a leader and trailer added ($25 charge), use code letter C instead. D = 13″ machine-ready reel. EIA-481 embossed plastic tape (3000 per full reel). Factory order only, not stocked. 2. Inductance tested at 500 kHz, 0.1 Vrms using an Agilent/HP 4284. 3. DCR is measured on a micro-ohmmeter at points indicated. Packaging: 4. SRF measured using an Agilent/HP 8753ES network analyzer or equivalent. 5. DC current at which the inductance drops 20% (typ) from its value without current. 6. Current that causes a 40°C temperature rise from 25°C ambient. 7. Ambient temperature range: –40°C to +85°C with Irms current +85°C to +125°C with derated current 8. Storage temperature range: Component: –40°C to +125°C Packaging: –40°C to +80°C 9. Electrical specifications at 25°C. Refer to Doc 362 “Soldering Surface Mount Components” before soldering. Dimensions are in Weight: Terminations: Tape and reel: inches mm 0.19 g Matte-tin over nickel over copper 750/7″ reel, 3000/13″ reel 16 mm tape width Document 602-1 Revised 01/13/15 Document 602-2 Shielded Power Inductor - FA2769-AL L vs Current Temperature Rise vs Current 80 Temperature rise (from 25°C) Inductance (nH) 100 10 1 0.1 10 1 Current (A) 100 70 60 50 40 30 20 10 0 0 1 2 3 4 5 6 7 8 9 10 Current (A rms) Irms Derating Document 602-2 Revised 01/13/15