MB2S thru MB10S(Thin Body) Glass Passivated Single Phase Bridge Rectifiers Reverse Voltage 200 to 1000V Forward Current 0.5 Amp Features Glass passivated die construction Ideal for automatic insertion Plastic material used carries UL flammability recognition 94V-0 High surge current capability y y - + Circuit 效 y y Mechanical Data Case: Molded plastic case Terminals: Plated leads solderable per MIL-STD-750, Method 2026 无 ~ VRRM VRSM 200V 400V 600V 800V 1000V 300V 500V 700V 900V 1100V 印 MB2S MB4S MB6S MB8S MB10S ~ Module Type TYPE Polarity: Marked on Body Mounting Position: Any Maximum Ratings and Thermal Characteristics (TA = 25℃ unless otherwise noted) Symbol Conditions Values 0.5 Maximum average forward output rectified current Tc =40℃ IF(AV) IFSM i2t Rating for fusing (t<8.3ms) a.c.50HZ;r.m.s.;1min 打 Visol Peak forward surge current single half sine-wave superimposed on rated load (JEDEC Method) RθJA RθJL Operating Junction and storage temperature range Electrical Characteristics (TA = 25℃ unless otherwise noted) Symbol Conditions VFM Maximum Instantaneous Forward Voltage per leg IR Maximum DC reverse current at rated DC blocking voltage per leg CJ Typical Junction Capacitance per leg Notes: A 30 A 3.7 A2s 2500 V (1) Typical thermal resistance per leg Tj, TSTG Units IFM =0.8A TA = 25℃ TA = 125℃ VR=4.0V 1.0MHZ 60 16(2) ℃/W -55 to +150 ℃ Values Units 1.1 V 5.0 500 µA 13 PF (1) Mounted on glass epoxy PC board with 1.3mm2 solder pad. (2) Mounted on aluminum substrate PC board with 1.3mm2 solder pad. Document Number: MB2S thru MB10S(Thin Body) Nov.30,2014 www.smsemi.com 1 MB2S thru MB10S(Thin Body) 打 印 无 效 Performance Curves Document Number: MB2S thru MB10S(Thin Body) Nov.30,2014 www.smsemi.com 2 MB2S thru MB10S(Thin Body) Package Outline Information 印 无 效 CASE: MBS-1 打 Dimensions in inches (mm) Document Number: MB2S thru MB10S(Thin Body) Nov.30,2014 www.smsemi.com 3