P-DUKE FDC05-12S33 5 watts dc-dc converter Datasheet

FDC05(W) SERIES
5 WATTS
DC-DC CONVERTER
FEATURES
• 5 WATTS OUTPUT POWER
• OUTPUT CURRENT UP TO 1000mA
• STANDARD 2.00 X 1.00 X 0.40 INCH PACKAGE
• HIGH EFFICIENCY UP TO 83%
• 2:1 AND 4:1 WIDE INPUT VOLTAGE RANGE
• SIX-SIDED CONTINUOUS SHIELD
• FIXED SWITCHING FREQUENCY
• UL60950-1, EN60950-1, & IEC60950-1 SAFETY APPROVALS
• CE MARKED
• COMPLIANT TO RoHS II & REACH
OPTIONS
Negative & Positive logic Remote On/Off
DESCRIPTION
APPLICATIONS
Wireless Network
Telecom/Datacom
Industry Control System
Measurement Equipment
Semiconductor Equipment
The FDC05 and FDC05-W series offer 5 watts of output power from a 2 x
1 x 0.4 inch package without derating to 71ºC ambient temperature.
FDC05 series have 2:1 wide input voltage of 9~18VDC, 18~36VDC and
36~75VDC. FDC05-W series have 4:1 ultra wide input voltage of
9~36VDC and 18~75VDC.
T E C H N I C A L S P E C I F I C AT I O N
All specifications are typical at nominal input, full load and 25ºC otherwise noted
OUTPUT SPECIFICATIONS
INPUT SPECIFICATIONS
Output power
Voltage accuracy
Minimum load
Line regulation
12VDC nominal input
9 ~ 18VDC
24VDC nominal input
18 ~ 36VDC
Input voltage range
48VDC nominal input
36 ~ 75VDC
FDC05-W 24VDC nominal input
9 ~ 36VDC
48VDC nominal input
18 ~ 75VDC
Input filter
Pi type
12VDC input
36VDC 100ms, max.
Input surge voltage
24VDC input
50VDC 100ms, max.
48VDC input
100VDC 100ms, max.
Input reflected ripple current
20mAp-p
Nominal input and
Start up time
Power up
450ms, max.
Constant resistive load
Remote ON/OFF (Option) (Note 6)
(Positive logic)
DC-DC ON
Open or 3.5V < Vr < 12V
Short or 0V < Vr < 1.2V
DC-DC OFF
Short or 0V < Vr < 1.2V
(Negative logic)
DC-DC ON
DC-DC OFF
Open or 3.5V < Vr < 12V
Input current of remote control pin
Nominal input
-0.5mA ~ +1mA
Remote off state input current
Nominal input
2.5mA
5 Watts, max.
± 1%
0%
LL to HL at Full Load
± 0.2%
Single
± 0.2%
Load regulation
No load to Full load
Dual
± 1%
Cross regulation (Dual) Asymmetrical load 25% / 100% FL
± 5%
Ripple and noise
20MHz bandwidth
See table
Temperature coefficient
±0.02% / ºC, max.
Transient response
25% load step change
Single 200µs
recovery time
FL to 1/2 FL ±1% error band
Dual 200µs
Over load protection
% of FL at nominal input
170%
Short circuit protection
Continuous, automatics recovery
GENERAL SPECIFICATIONS
Efficiency
Isolation Voltage
Isolation resistance
Input to Output
Input (Output) to Case
500VDC
Isolation capacitance
Switching frequency
Safety approvals
See table
1600VDC, min.1minute
1600VDC, min.1minute
9
10 ohms, min.
300pF, max.
Standard
300kHz±10%
“W” series
200kHz±10%
IEC60950-1, UL60950-1, & EN60950-1
Case material
Nickel-coated copper
Base material
Non-conducted black plastic
Potting material
Epoxy (UL94 V-0)
2.00 X 1.00 X 0.40 Inch
(50.8 X 25.4 X 10.2 mm)
27g (0.95oz)
Dimensions
Weight
MTBF (Note 1)
MIL-HDBK-217F
7.066 x 106 hrs
FDC05
ENVIRONMENTAL SPECIFICATIONS
Operating ambient
Standard
-25ºC ~ +85ºC (with derating)
temperature
M1 (Note 7)
-40ºC ~ +85ºC (non-derating)
(Reference derating curve) M2 (W series) -40ºC ~ +85ºC (with derating)
Maximum case temperature
+100ºC
Storage temperature range
-55ºC ~ +125ºC
Natural convection
12ºC/watt
Thermal impedance (Note 8)
Natural convection with Heat-sink 10ºC/watt
Thermal shock
MIL-STD-810F
Vibration
MIL-STD-810F
Relative humidity
5% to 95% RH
EMC CHARACTERISTICS
EMI
EN55022
ESD
EN61000-4-2
Radiated immunity
EN61000-4-3
Fast transient (Note 9) EN61000-4-4
Surge (Note 9)
Conducted immunity
Page 1 of 2
www.pduke.com
EN61000-4-5
EN61000-4-6
Class A
Class B
Air
Contact
± 8kV
Perf. Criteria B
± 6kV
10 V/m Perf. Criteria A
± 2kV Perf. Criteria B
± 1kV Perf. Criteria B
10 Vr.m.s Perf. Criteria A
2014/4/30
FDC05(W) SERIES
5 WATTS
Model
Number
Input
Range
Output
Voltage
FDC05-12S33
FDC05-12S05
FDC05-12S12
FDC05-12S15
FDC05-12D05
FDC05-12D12
FDC05-12D15
FDC05-24S33 (W)
FDC05-24S05 (W)
FDC05-24S12 (W)
FDC05-24S15 (W)
FDC05-24D05 (W)
FDC05-24D12 (W)
FDC05-24D15 (W)
FDC05-48S33 (W)
FDC05-48S05 (W)
FDC05-48S12 (W)
FDC05-48S15 (W)
FDC05-48D05 (W)
FDC05-48D12 (W)
FDC05-48D15 (W)
9 ~ 18 VDC
9 ~ 18 VDC
9 ~ 18 VDC
9 ~ 18 VDC
9 ~ 18 VDC
9 ~ 18 VDC
9 ~ 18 VDC
18 ~ 36 (9 ~ 36) VDC
18 ~ 36 (9 ~ 36) VDC
18 ~ 36 (9 ~ 36) VDC
18 ~ 36 (9 ~ 36) VDC
18 ~ 36 (9 ~ 36) VDC
18 ~ 36 (9 ~ 36) VDC
18 ~ 36 (9 ~ 36) VDC
36 ~ 75 (18 ~ 75) VDC
36 ~ 75 (18 ~ 75) VDC
36 ~ 75 (18 ~ 75) VDC
36 ~ 75 (18 ~ 75) VDC
36 ~ 75 (18 ~ 75) VDC
36 ~ 75 (18 ~ 75) VDC
36 ~ 75 (18 ~ 75) VDC
3.3 VDC
5 VDC
12 VDC
15 VDC
± 5 VDC
± 12 VDC
± 15 VDC
3.3 VDC
5 VDC
12 VDC
15 VDC
± 5 VDC
± 12 VDC
± 15 VDC
3.3 VDC
5 VDC
12 VDC
15 VDC
± 5 VDC
± 12 VDC
± 15 VDC
DC-DC CONVERTER
(2)
(3)
Output Current
Output
No load
Eff (4)
Min. load Full load Ripple & Noise Input Current (%)
0mA
0mA
0mA
0mA
0mA
0mA
0mA
0mA
0mA
0mA
0mA
0mA
0mA
0mA
0mA
0mA
0mA
0mA
0mA
0mA
0mA
1000mA
1000mA
470mA
400mA
± 500mA
± 230mA
± 190mA
1000mA
1000mA
470mA
400mA
± 500mA
± 230mA
± 190mA
1000mA
1000mA
470mA
400mA
± 500mA
± 230mA
± 190mA
50mVp-p
50mVp-p
50mVp-p
50mVp-p
50mVp-p
50mVp-p
50mVp-p
50mVp-p
50mVp-p
50mVp-p
50mVp-p
50mVp-p
50mVp-p
50mVp-p
50mVp-p
50mVp-p
50mVp-p
50mVp-p
50mVp-p
50mVp-p
50mVp-p
10mA
10mA
10mA
15mA
20mA
15mA
20mA
15(5mA)
15(5mA)
10(5mA)
20(5mA)
15(5mA)
20(5mA)
20(10mA)
5(5mA)
10(10mA)
10(10mA)
10(10mA)
10(5mA)
10(10mA)
10(10mA)
7.
8.
9.
3700µF
1700µF
290µF
188µF
± 850µF
± 140µF
± 47µF
3700µF
1700µF
290µF
188µF
± 850µF
± 140µF
± 47µF
3700µF
1700µF
290µF
188µF
± 850µF
± 140µF
± 47µF
FDC05-48S05 Derating Curve
Note
1.
2.
3.
4.
5.
6.
76
79
81
80
79
81
82
73 (77)
78 (80)
81 (82)
81 (81)
79 (80)
82 (82)
81 (83)
73 (73)
76 (76)
82 (82)
82 (81)
78 (78)
81 (81)
81 (81)
Capacitor
(5)
Load max
MIL-HDBK-217F @Ta=25 ºC, Full load.
Typical value at nominal input and full load. (20MHz BW.)
Typical value at nominal input and no load.
Typical value at nominal input and full load.
Test by minimum input and constant resistive load.
The CTRL pin voltage is referenced to -INPUT
To order positive logic ON/OFF control add the suffix-P (Ex: FDC05-48S05-P)
To order negative logic ON/OFF control add the suffix-N (Ex: FDC05-48S05-N)
M1 version is more efficient, therefore, it can be operated in a more extensive temperature range
than standard and M2 version.
Heat-sink is optional and P/N: 7G-0020C-F.
An external input filter capacitor is required if the module has to meet EN61000-4-4, EN61000-4-5.
The filter capacitor Power Mate suggest: Nippon chemi-con KY series, 220µF/100V.
FDC05-48S05 Derating Curve With Heat-sink (Note 8)
CAUTION: This power module is not internally fused. An input line fuse must always be used.
FDC05-48S05 Efficiency VS Output Load
83
85
81
80
79
75
EFFICIENCY(%)
EFFICIENCY(%)
FDC05-48S05 Efficiency VS Input Voltage
77
75
73
70
65
60
55
71
50
69
36
40
44
48
52
56
60
64
INPUT VOLTAGE(V)
68
72
75
10
20
30
40
50
60
70
% of FULL LOAD
80
90
100
PIN CONNECTION
PIN
1
2
3
4
5
6
SINGLE
+INPUT
-INPUT
+OUTPUT
NO PIN
-OUTPUT
CTRL (Option)
DUAL
+INPUT
-INPUT
+OUTPUT
COMMON
-OUTPUT
CTRL (Option)
1. All dimensions in Inch (mm)
Tolerance: X.XX±0.02 (X.X±0.5)
X.XXX±0.01 (X.XX±0.25)
2. Pin pitch tolerance ±0.01 (0.25)
3. Pin dimension tolerance ±0.004 (0.1)
Page 2 of 2
www.pduke.com
2014/4/30
Similar pages