UNISONIC TECHNOLOGIES CO., DTA114E PNP EPITAXIAL SILICON TRANSISTOR PNP DIGITAL TRANSISTOR (BUILT-IN RESISTORS) FEATURES 3 *Built-in bias resistors enable the configuration of an inverter circuit without connecting external input resistors (see the equivalent circuit). *The bias resistors consist of thin-film resistors with complete isolation to allow positive biasing of the input. They also have the advantage of almost completely eliminating parasitic effects. *Only the on / off conditions need to be set for operation, making device design easy. EQUIVALENT CIRCUIT PIN CONFIGURATION PIN NO. PIN NAME 1 GND 2 IN 3 OUT R2 GND(+) IN SOT-23 *Pb-free plating product number:DTA114EL OUT R1 IN 1 2 OUT GND(+) ORDERING INFORMATION Order Number Normal Lead free DTA114E-AE3-R DTA114EL-AE3-R Package Packing SOT-23 Tape Reel MARKING AB4 www.unisonic.com.tw Copyright © 2005 Unisonic Technologies Co., 1 QW-R206-046,B DTA114E PNP EPITAXIAL SILICON TRANSISTOR ABSOLUATE MAXIUM RATINGS (Ta = 25℃) PARAMETER Supply Voltage Input Voltage Output Current Power Dissipation Junction Temperature Storage Temperature SYMBOL VCC VIN IOUT(MAX) PD TJ TSTG RATINGS -50 -40 ~ +10 -100 200 150 -40 ~ +150 UNIT V V mA mW ℃ ℃ ELECTRICAL CHARACTERISTICS (Ta= 25℃, unless otherwise specified.) PARAMETER Input Voltage Output Voltage Input Current Output Current DC Current Gain Input Resistance Resistance Ratio Transition Frequency SYMBOL VIN(off) VIN(ON) VOUT(ON) IIN IOUT(off) GV R1 R2/R1 fT TEST CONDITIONS VCC= -5V, IOUT= -100μA VOUT= -0.3V, IOUT= -10mA IOUT/IIN= -10mA/-0.5 mA VIN= -5V VCC= -50V , VIN=0V VOUT= -5V, IOUT= -5mA VCE= -10 V, IE=5mA, f=100MHz UNISONIC TECHNOLOGIES CO., LTD www.unisonic.com.tw MIN TYP MAX -0.5 UNIT -0.3 -0.88 -0.5 V mA μA 13 1.2 kΩ -3 30 7 0.8 10 1 250 V MHz 2 QW-R206-046,C DTA114E ■ PNP EPITAXIAL SILICON TRANSISTOR TYPICAL CHARACTERICS Input Voltage vs.Output Current (ON Characterristics) Output Current vs Input Voltage (OFF Characterristics) -10m -100 VoUT=-0.3V Vcc=-5V -5m Output Current, IoUT (A) Input Voltage, VIN (ON) V -50 -20 -10 -5 -2 Ta= - 40℃ 25℃ 100℃ -1 -2m -1m -500μ Ta= 100℃ 25℃ -40℃ -200μ -100μ -50μ -20μ -10μ -500 m -5μ -200 m -2μ -100 m -100μ -200μ -500μ-1m -2m -5m -10m -20m -1μ 0 -50m -100m DC Current Gain vs. Output Current -1 VoUT=-5V Ta= 100℃ 25℃ -40℃ 200 100 50 20 10 -200 m lo UT/l IN=20 Ta= 100℃ 25℃ -40℃ -50m -20m -10m 2 -2m -10m -20m -3.0 -100 m -5m -5m -2.5 -500 m 5 1 -100μ -200μ -500μ-1m -2m -2.0 -1.5 Output Voltage vs. Output Current Output Voltage, VOUT (ON) (V) DC Current Gain, G V 500 -1.0 Input Voltage , VIN (OFF) (V) Output Current, IoUT (A) 1k -0.5 -50m -100m Output Current, IoUT (A) -1m -100μ-200μ -500 μ -1m -2m -5m -10m -20m -50m -100 m Output Current, IoUT (A) UTC assum es no responsibility for equipm ent failures that result from using products at v alues that ex ceed, ev en m om entarily, rated v alues (such as m ax im um ratings, operating condition ranges, or other param eters) listed in products specifications of any and all UT C products described or contained herein. UT C products are not designed for use in life support appliances, dev ices or system s where m alfunction of these products can be reasonably expected to result in personal injury. R eproduction in whole or in part is prohibited without the prior written consent of the copyright owner. T he inform ation presented in this docum ent does not form part of any quotation or contract, is believ ed to be accurate and reliable and m ay be changed without notice. UNISONIC TECHNOLOGIES CO., LTD www.unisonic.com.tw 3 QW-R206-046,C