Surface Mount Aluminum Electrolytic Capacitors RoHS Compliant FEATURES • CYLINDRICAL V-CHIP CONTRUCTION • LOW PROFILE, 4.6mm MAXIMUM HEIGHT • DESIGNED FOR REFLOW ..SOLDERING includes all homogeneous materials *See Part Number System for Details CHARACTERISTICS Rated Voltage Rating Rated Capacitance Range Operating Temperature Range Capacitance Tolerance Max. Leakage Current After 2 Minutes at 20°C Surge Voltage & Max. Tanδ Low Temperature Stability (Impedance Ratio @ 120Hz) Load Life Test at Rated W.V. 85°C 1,000 Hours 4 ~ 50Vdc 0.1 ~ 220µF -40° ~ +85°C ±20%(M) 0.01CV or 3µA, whichever is greater W.V. (Vdc) 4 6.3 10 16 25 35 50 S.V. (Vdc) 5 8.0 13 20 32 44 63 0.40 0.30 0.24 0.20 0.16 0.14 0.12 Tanδ @ 120Hz/20°C W.V. (Vdc) 4 6.3 10 16 25 35 50 Z-25°C/Z +20°C 7 4 3 2 2 2 2 Z-40°C/Z +20°C 15 10 8 6 4 4 4 Capacitance Change Within ±25% of initial measured value Less than 200% of specified value Tanδ Leakage Current Less than specified value MAXIMUM PERMISSIBLE RIPPLE CURRENT (mA rms AT 120Hz AND 85OC) Working Voltage (Vdc) Cap. (µF) 4 6.3 10 16 25 35 50 MAXIMUM ESR (Ω AT 120Hz AND 20OC) Working Voltage (Vdc) Cap. (µF) 4 6.3 10 16 25 35 50 0.1 - - - - - - 1.0 0.1 - - - - - - 1990 0.22 - - - - - - 2.0 0.22 - - - - - - 905 0.33 - - - - - - 2.8 0.33 - - - - - - 603 0.47 - - - - - - 4.0 0.47 - - - - - - 423 - - - - - - 199 1.0 - - - - - - 8.4 1.0 2.2 - - - - - - 14 2.2 - - - - - - 90.5 3.3 - - - - - - 17 3.3 - - - - - - 60.3 - - - - 56.5 49.4 42.3 4.7 - 10 - 22 - 33 28 47 33 - - 17 18 21 4.7 - - 23 27 29 33 10 - - - 33.2 26.5 23.2 19.0 28 33 37 47 49 - 22 - 22.6 18.1 15.1 12.1 10.8 - 37 41 51 57 - - 33 20.1 15.1 12.6 10.1 8.1 - - 45 53 61 - - - 47 14.1 10.6 8.5 7.1 - - - 6.6 5.0 3.98 - - - - 3.0 - - - - - - - NACP Series 100 56 70 74 - - - - 100 220 98 - - - - - - 220 RIPPLE CURRENT FREQUENCY CORRECTION FACTOR Cap. (µF) 0.47 ~ 4.7 10 ~ 33 47 ~ 220 10< f <1KHz 1.0 1.0 1.0 Frequency 1K< f <10KHz 10K< f >100KHz 1.3 1.5 1.2 1.3 1.1 1.2 >100KHz 2.0 1.45 1.3 PRECAUTIONS ® NIC COMPONENTS CORP. Please review the notes on correct use, safety and precautions found on pages T10 & T11 of NIC’s Electrolytic Capacitor catalog. Also found at www.niccomp.com/precautions If in doubt or uncertainty, please review your specific application - process details with NIC’s technical support personnel: [email protected] www.niccomp.com www.lowESR.com www.RFpassives.com www.SMTmagnetics.com 5 Surface Mount Aluminum Electrolytic Capacitors STANDARD PRODUCT AND CASE SIZE Dφ xL (mm) Working Voltage (Vdc) Cap. (µF) 4 6.3 10 16 25 35 50 0.1 - - - - - - 4x4.5 0.22 - - - - - - 4x4.5 0.33 - - - - - - 4x4.5 0.47 - - - - - - 4x4.5 1.0 - - - - - - 4x4.5 2.2 - - - - - - 4x4.5 3.3 - - - - - - 4x4.5 4.7 - - - - 4x4.5 4x4.5 5x4.5 10 - - - 4x4.5 5x4.5 5x4.5 6.3x4.5 22 - 4x4.5 5x4.5 5x4.5 33 4x4.5 5x4.5 5x4.5 47 4x4.5 5x4.5 100 5x4.5 220 6.3x4.5 - - Case Size Dφ±0.5 L max. A/B±0.2 I ± 0.2 W 4x5.5 4.0 5.5 4.3 1.8 0.5 ~ 0.8 5x5.5 5.0 5.5 5.3 2.1 0.5 ~ 0.8 6.3x5.5 6.3 5.5 6.6 2.5 0.5 ~ 0.8 + I I Dφ - A - - B - - - - - - - - - - - 6.3x4.5 6.3x4.5 P±0.2 1.0 1.4 2.2 W P 6.3x4.5 6.3x4.5 6.3x4.5 6.3x4.5 DIMENSIONS (mm) - 6.3x4.5 6.3x4.5 NACP Series 0.3mm max. L PART NUMBER SYSTEM NACP 470 M 16V 6.3x5.5 TR 13 F Series RoHS Compliant 97% Sn (min.), 3% Bi (max.) 330mm (13”) Reel Tape & Reel Size in mm Working Voltage Tolerance Code M=20%, K=10% Capacitance Code in µF, first 2 digits are significant Third digit is no. of zeros, “R” indicates decimal for values under 10µF ® 6 NIC COMPONENTS CORP. www.niccomp.com www.lowESR.com www.RFpassives.com www.SMTmagnetics.com