Renesas HD74LS54FPEL 4-wide 2-input, 3-input and-or-invert gate Datasheet

HD74LS54
4-wide 2-input, 3-input AND-OR-INVERT Gates
REJ03D0413–0200
Rev.2.00
Feb.18.2005
Features
• Ordering Information
Part Name
Package Type
Package Code
(Previous Code)
Package
Abbreviation
Taping Abbreviation
(Quantity)
HD74LS54FPEL
SOP-14 pin(JEITA)
PRSP0014DF-B
(FP-14DAV)
FP
EL (2,000 pcs/reel)
Note: Please consult the sales office for the above package availability.
Pin Arrangement
A
1
14
VCC
B
2
13
J
C
3
12
I
D
4
11
H
E
5
10
G
Y
6
9
F
GND
7
8
NC
(Top view)
Circuit Schematic
VCC
Inputs
20k
75
8k
4.5k
20k
3k
1.5k
Note:
Output
Y
GND
The schematic within the dashed line is included the half input terminals of HD74LS54.
Rev.2.00, Feb.18.2005, page 1 of 3
HD74LS54
Absolute Maximum Ratings
Item
Supply voltage
Input voltage
Power dissipation
Storage temperature
Symbol
VCC
VIN
PT
Tstg
Ratings
7
7
400
–65 to +150
Unit
V
V
mW
°C
Note: Voltage value, unless otherwise noted, are with respect to network ground terminal.
Recommended Operating Conditions
Item
Symbol
Vcc
IOH
IOL
Topr
Supply voltage
Output current
Operating temperature
Min
4.75
—
—
–20
Typ
5.00
—
—
25
Max
5.25
–400
8
75
Unit
V
µA
mA
°C
Electrical Characteristics
(Ta = –20 to +75 °C)
Item
Input voltage
Symbol
min.
typ.*
max.
Unit
VIH
VIL
2.0
—
2.7
—
—
—
—
—
—
—
—
0.8
—
0.5
0.4
V
V
V
II
—
—
—
—
—
—
20
–0.4
0.1
µA
mA
mA
VCC = 5.25 V, VI = 2.7 V
VCC = 5.25 V, VI = 0.4 V
VCC = 5.25 V, VI = 7 V
IOS
–20
—
–100
mA
VCC = 5.25 V
—
—
—
0.8
1.0
—
1.6
2.0
–1.5
mA
mA
V
VCC = 5.25 V
VCC = 5.25 V
VCC = 4.75 V, IIN = –18 mA
VOH
Output voltage
Input current
Short-circuit output
current
VOL
IIH
IIL
ICCH
ICCL
Input clamp voltage
VIR
Note: * VCC = 5 V, Ta = 25°C
Supply current
V
Condition
VCC = 4.75 V, VIL = 0.8 V, IOH = –400 µA
IOL = 8 mA
VCC = 4.75 V, VIH = 2 V
IOL = 4 mA
Switching Characteristics
(VCC = 5 V, Ta = 25°C)
Item
Propagation delay time
Symbol
tPLH
tPHL
min.
—
—
typ.
12
12.5
max.
20
20
Unit
ns
ns
Condition
CL = 15 pF, RL = 2 kΩ
Note: Refer to Test Circuit and Waveform of the Common Item "TTL Common Matter (Document No.: REJ27D00050100)".
Rev.2.00, Feb.18.2005, page 2 of 3
HD74LS54
Package Dimensions
JEITA Package Code
P-SOP14-5.5x10.06-1.27
RENESAS Code
PRSP0014DF-B
*1
Previous Code
FP-14DAV
D
MASS[Typ.]
0.23g
NOTE)
1. DIMENSIONS"*1 (Nom)"AND"*2"
DO NOT INCLUDE MOLD FLASH.
2. DIMENSION"*3"DOES NOT
INCLUDE TRIM OFFSET.
F
14
8
c
HE
*2
E
bp
Index mark
Reference
Symbol
Terminal cross section
( Ni/Pd/Au plating )
1
Z
*3
Nom
Max
D
10.06
10.5
E
5.50
A2
7
e
A1
bp
Dimension in Millimeters
Min
x
M
0.00
0.10
0.34
0.40
0.46
0.15
0.20
0.25
7.80
8.00
A
L1
0.20
2.20
bp
b1
c
A
c
A1
θ
y
L
Detail F
1
θ
0°
HE
7.50
e
1.27
x
0.12
y
0.15
1.42
Z
L
L
Rev.2.00, Feb.18.2005, page 3 of 3
8°
0.50
1
0.70
1.15
0.90
Sales Strategic Planning Div.
Nippon Bldg., 2-6-2, Ohte-machi, Chiyoda-ku, Tokyo 100-0004, Japan
Keep safety first in your circuit designs!
1. Renesas Technology Corp. puts the maximum effort into making semiconductor products better and more reliable, but there is always the possibility that trouble
may occur with them. Trouble with semiconductors may lead to personal injury, fire or property damage.
Remember to give due consideration to safety when making your circuit designs, with appropriate measures such as (i) placement of substitutive, auxiliary circuits,
(ii) use of nonflammable material or (iii) prevention against any malfunction or mishap.
Notes regarding these materials
1. These materials are intended as a reference to assist our customers in the selection of the Renesas Technology Corp. product best suited to the customer's
application; they do not convey any license under any intellectual property rights, or any other rights, belonging to Renesas Technology Corp. or a third party.
2. Renesas Technology Corp. assumes no responsibility for any damage, or infringement of any third-party's rights, originating in the use of any product data,
diagrams, charts, programs, algorithms, or circuit application examples contained in these materials.
3. All information contained in these materials, including product data, diagrams, charts, programs and algorithms represents information on products at the time of
publication of these materials, and are subject to change by Renesas Technology Corp. without notice due to product improvements or other reasons. It is
therefore recommended that customers contact Renesas Technology Corp. or an authorized Renesas Technology Corp. product distributor for the latest product
information before purchasing a product listed herein.
The information described here may contain technical inaccuracies or typographical errors.
Renesas Technology Corp. assumes no responsibility for any damage, liability, or other loss rising from these inaccuracies or errors.
Please also pay attention to information published by Renesas Technology Corp. by various means, including the Renesas Technology Corp. Semiconductor
home page (http://www.renesas.com).
4. When using any or all of the information contained in these materials, including product data, diagrams, charts, programs, and algorithms, please be sure to
evaluate all information as a total system before making a final decision on the applicability of the information and products. Renesas Technology Corp. assumes
no responsibility for any damage, liability or other loss resulting from the information contained herein.
5. Renesas Technology Corp. semiconductors are not designed or manufactured for use in a device or system that is used under circumstances in which human life
is potentially at stake. Please contact Renesas Technology Corp. or an authorized Renesas Technology Corp. product distributor when considering the use of a
product contained herein for any specific purposes, such as apparatus or systems for transportation, vehicular, medical, aerospace, nuclear, or undersea repeater
use.
6. The prior written approval of Renesas Technology Corp. is necessary to reprint or reproduce in whole or in part these materials.
7. If these products or technologies are subject to the Japanese export control restrictions, they must be exported under a license from the Japanese government and
cannot be imported into a country other than the approved destination.
Any diversion or reexport contrary to the export control laws and regulations of Japan and/or the country of destination is prohibited.
8. Please contact Renesas Technology Corp. for further details on these materials or the products contained therein.
http://www.renesas.com
RENESAS SALES OFFICES
Refer to "http://www.renesas.com/en/network" for the latest and detailed information.
Renesas Technology America, Inc.
450 Holger Way, San Jose, CA 95134-1368, U.S.A
Tel: <1> (408) 382-7500, Fax: <1> (408) 382-7501
Renesas Technology Europe Limited
Dukes Meadow, Millboard Road, Bourne End, Buckinghamshire, SL8 5FH, U.K.
Tel: <44> (1628) 585-100, Fax: <44> (1628) 585-900
Renesas Technology Hong Kong Ltd.
7th Floor, North Tower, World Finance Centre, Harbour City, 1 Canton Road, Tsimshatsui, Kowloon, Hong Kong
Tel: <852> 2265-6688, Fax: <852> 2730-6071
Renesas Technology Taiwan Co., Ltd.
10th Floor, No.99, Fushing North Road, Taipei, Taiwan
Tel: <886> (2) 2715-2888, Fax: <886> (2) 2713-2999
Renesas Technology (Shanghai) Co., Ltd.
Unit2607 Ruijing Building, No.205 Maoming Road (S), Shanghai 200020, China
Tel: <86> (21) 6472-1001, Fax: <86> (21) 6415-2952
Renesas Technology Singapore Pte. Ltd.
1 Harbour Front Avenue, #06-10, Keppel Bay Tower, Singapore 098632
Tel: <65> 6213-0200, Fax: <65> 6278-8001
© 2005. Renesas Technology Corp., All rights reserved. Printed in Japan.
Colophon .2.0
Similar pages