Fujitsu FTP-627MCL601 2â high speed thermal p rinter Datasheet

24V driveN, FTP-607 Series
2” high speed thermal printer
FTP-627MCL401/601
n Overview
The FTP-627 MCL Series are 24V driven high-speed printers
with a ultra low profile auto cutter and long life.
The FTP-627 MCL Series can be used for a variety of
applications, such as POS terminals, ticket vending machines,
label printers, banking terminals, and measurement and
medical equipment.
n HIGHLIGHTS
• Ultra low profile
Height 21.8 mm, width 81.2 mm, depth 42.2 mm
FTP-627MCL401/601
• High speed printing
It can print at 100/150 mm/s (800 dotlines/s) maximum by
using Fujitsu's unique head drive control.
• Auto Cutter
Long life and high reliable guilotine with dedicated motor.
• Easy paper setting
Our lever platen release mechanism allows a wide paper route, so paper can be easily inserted.
Conventional auto loading is also available.
• Multifunctional die-cast frame
Wide operating temperature range, long continuous printing, high ESD absorbtion and discharge of static electricity vibration and shock resistant.
FTP-627DSL291R
• RoHS compliant
FTP-627DSL601R
FTP-627MCL401/601
n part numbers
Part Number
Easy Load Model with low profile cutter
FTP-627MCL401
FTP-627MCL601
LSI for driving
MCL401
FTP-627CU301R
MCL601
FTP-627CU601R
MCL401
FTP-627DSL291R Parallel (Centronics) /Serial (RS-232C)
MCL601
FTP-627DSL603R (USB)
Interface
board for
Mech/Cutter
Cutter
supported
Interface
cables
Parallel (Centronics)
FTP-628Y202
Serial (RS232C)
FTP-628Y302
USB
FTP-629Y301
FTP-627DSL605R Serial (RS-232C)
n specifications
Item
Specifications
Part number
FTP-627MCL401/601
Printing method
Thermal-line dot method
Dot structure
432 dots/line
Dot pitch (Horizontal)
0.125 mm (8 dots/mm)—Dot density
Dot pitch (Vertical)
0.125 mm (8 dots/mm)—Line feed pitch
Effective printing area
54 mm
Number of columns
ANK 36 columns/line
(maximum 12/24 dot font)
Paper width 58 mm
Paper thickness
60 to 100 µ m (some paper in this range may not be
used because of paper characteristics)
Printing Speed
Character types
MCL401
MCL601
Maximum 100mm/sec. (800 dot line/sec.)
Maximum 150mm/sec. (1,200 dot line/sec.)
Alphanumeric, kana: International characters: JIS Kanji (Kanji CG loaded board):
159 types
195 types
about 6800 types
12
× 24 dots, (1.5 × 3.0 mm), 36 columns: ANK
Character, dimensions (W×H), number
24 × 24 dots, (3.0 × 3.0 mm), 18 columns: ANK
of columns
8 × 16 dots, (1.0 × 2.0 mm), 54 columns: ANK
16 × 16 dots, (2.0 × 2.0 mm), 27 columns: ANK
FTP-627MCL401/601
n specifications
Item
Specification
Iterface
Conforms to RS232C/Centronics / USB
Power supply
For print head
For motor
For cutter
Dimensions
Weight
Life
Detection
function
24 VDC average current, 0.38A (0.88A peak)
(print ratio: 12.5%, print speed 100mm/sec.)
MCL601
24 VDC average current TBD A (TBD A peak)
MCL401
24 VDC ±5%, 1 A maximum
MCL601
24 VDC ±5%, 1.1 A maximum
MCL401
24 VDC ±5%, 1 A maximum
MCL601
24 VDC ±5%, 1.1 A maximum
For logic
4.75 to 5.25 VDC ± 5%, 0.1 A maximum
Mechanism with cutter
81.2 x 42.2 x 21.8 mm (WxDxH)
Interface board
70 x 60 x 12 mm (WxDxH)
Mechanism with cutter
Approximately 97g
Interface board
Approximately 25g
Head
Cutter
Operating
environment
MCL401
Pulse resistance: 50 million pulses/dot (print ratio: 25%).
MCL401
Abrasion resistance: paper traveling distance 50km
MCL601
Abrasion resistance: paper traveling distance 100km
MCL401
500,000 cuts
MCL601
1,000,000 cuts
Platen
5,000 times (open/close)
Operating temperature*
0ºC to +50ºC
Operating humidity
20 to 85% RH (no condensation)
Storage temperature
-20ºC to +60ºC (paper not included)
Storage humidity
5 to 95% RH (no condensation)
Head temperature
detection
Detected by thermistor
Paper out/mark
detection
Detected by photo-interruptor
Platen release
Detected by sliding switch
Recommended thermal sensitive paper
High sensitive paper
TF50KS-E4 (Nippon paper)
Standard paper
TF60KS-E (Nippon paper),
FTP-020PU001 (58mm)
PD150R (Oji paper)
FTP-020PU701 (58mm)
Medium life storage
paper
TF60KS-F1 (Nippon paper)
FTP-020P0102 (58mm)
PD170R (Oji paper)
P220VBB-1 (Mitsubishi paper)
Long life storage
paper
PD160R (Oji paper)
AFP-235 (Mitsubishi paper)
TP50KJ-R (Nippon paper)
HA220AA (Nippon paper)
*+5˚C to +40˚C printing density assurance rance.
FTP-627MCL401/601
n function of interface board
Item
Item
1.
Test print function
8.
Cutter trouble detect
2.
Paper out detection
9.
Motor power saving function
3.
Paper near end detection
10.
Mark detection function
4.
Paten open detection
11.
MCU operation abnormality detection
5.
Thermal head temperature abnormality
detection
12.
Power ON/OFF sequence protection
6.
Blow-out fuse detection
13.
Motor over-current protection
7.
Head voltage abnormality detection
14.
Hardware timer
n dimensions
1. Printer mechanism
FTP-627MCL401/601
68.4
13.1
21.8
22.1
13.9 (14.4 MAX.)
25
44
27.7
(50~200)
1.6
28.3 (29.3MAX.)
5.4
Ø1.4
7.5
60
81.2
44
°
10.7
Unit: mm
Note: 1. Dimensions are nominal value (tolerance ±5 unless otherwise specified).
2. Platen unit (lever, platen, etc) moves by approximately 0.7mm toward paper insertion direction when platen is
open.
FTP-627MCL401/601
2. Interface board FTP-627DSL291R
(70.0)
63.5
3.25
3.25
50.5
1.45
1.0
4.0
25.5
24
CN4
30
29
2
3ѯ3.2
CN6
6
CN2
17.5
13.5
1.2
2.25
3.25
53.5
42.0
FG¯3.2
CN7
3.25
8
1.25
34.5
1.6
7
49.5
(60.0)
CN8
2
8
CN
Note: all dimensions are nominal value
() means just reference
The mounting height is the max.
Unit: mm
FTP-627MCL401/601
n INTERFACE board ftp-627dsl601 Series
Connectors on Control Board
Name
Functions
Remarks
Note
CN1 +24V power supply connector Connection for +24V power supply
CN2 RS-232C
Connection for serial interface
CN3 USB I/F connector
Connection for USB interface
CN4
Connection for thermal head + paper feed motor 2-inch, 30 pin
-
CN5 Cutter connector
Connection for paper cutter
CN6 Operation panel connector
Connection for operation panel
*1
CN7 Near end sensor connector
Connection for near end switch
*2
CN8
-
CN9 Logic power connector
CN10 Head/motor connector
Note:
Connection for +5V power Supply
Connection for thermal head & paper feed motor 2-inch, 24 pin
*1: Option
*2: Depends on specification
FTP-627MCL401/601
FTP-627MCL401
1. Connector (FPC) specification (CN3/CN10)
(1) Connector
Mechanical unit side:
FPC connector
Remote side (housing site):
52610-2490 (made by Molex)
(2) Pin assignment on the mechanical side
No
Signal
I/ O Content s
1
PH K
—
2
VSE N
I
Ground power supply for paper sensor
3
PH E
O
Photointerrupter (Emittor)
4
VH
I
Head drive power
5
DI
I
Data input
6
STB 2
I
Print enable signal 2
7
STB 3
I
Print enable signal 3
8
VD D
I
Logic Power
9
GN D
—
Head ground
10
GN D
—
Head ground
11
GN D
—
Head ground
12
TH
O
Thermistor
13
STB 1
I
Print enable signal 1
14
LAT
I
Data Latch
15
CL K
I
Clock
16
VH
I
Head drive power
17
VH
I
Head drive power
18
SW
—
Platen open switch
19
SW
—
Platen open switch
20
MT/ A
I
Motor excite signal A
21
MT/ A
I
Motor excite signal A
22
MT/ B
I
Motor excite signal B
23
MT/ B
I
Motor excite signal B
24
NC
—
Photointerrupter (Cathode)
Not connected
FTP-627MCL401/601
FTP-627MCL601
1. Connector (FPC) specification (CN4)
(1) Connector
Mechanical unit side:
FPC connector
Remote side (housing site):
52610-3071 (made by Molex)
(2) Pin assignment on the mechanical side
No.
Symbol
Signal Name
1
PHK
2
VSEN
3
PHE
4
VH
Head drive power
5
VH
Head drive power
6
VH
Head drive power
7
DI
Data in
8
STB2
Strobe 2
9
STB3
Strobe 3
Cathode for photo interrupter
Paper sensor power
Emitter for photo interrupter
10
Vdd
Logic power
11
GND
Head ground
12
GND
Head ground
13
GND
Head ground
14
GND
Head ground
15
GND
Head ground
16
GND
Head ground
17
TM
Thermistor
18
NC
NC
19
STB1
20
LAT
Data latch
21
CLK
Clock
22
VH
Head drive power
23
VH
Head drive power
24
VH
Head drive power
25
SW
Platen switch
26
SW
Platen switch
27
MT/A
Excitation signal A
28
MT/A
Excitation signal A
29
MT/B
Excitation signal B
30
MT/B
Excitation signal B
Strobe 1
FTP-627MCL401/601
Sensor (Photointerruptor)
Platen unit
Thermal head
Motor
FPC
Connect terminal:
surface side
Connector No
24, 23, .....................2,1
(FPC pin numbers)
2. Cutter (CN4/CN5)
Connector on control circuit side: 52610-0890 Molex or equivalent
No. Signal I/O
Contents
No. Signal
I/O
Contents
1
VSEN
I
Paper sensor power
2
PHE
O
Photo interruptor (emittor)
3
PH K
O
Photo interruptor (cathode)
4
MT/A
I
Motor excite signal A
5
MT/A
I
Motor excite signal A
6
MT/B
I
Motor excite signal B
7
MT/B
I
Motor excite signal B
8
NC
—
Not connected
Fujitsu Components International Headquarter Offices
Japan
Fujitsu Component Limited
Gotanda-Chuo Building
3-5, Higashigotanda 2-chome, Shinagawa-ku
Tokyo 141, Japan
Tel: (81-3) 5449-7010
Fax: (81-3) 5449-2626
Email: [email protected]
Web: www.fcl.fujitsu.com
Europe
Fujitsu Components Europe B.V.
Diamantlaan 25
2132 WV Hoofddorp
Netherlands
Tel: (31-23) 5560910
Fax: (31-23) 5560950
Email: [email protected]
Web: emea.fujitsu.com/components/
North and South America
Fujitsu Components America, Inc.
250 E. Caribbean Drive
Sunnyvale, CA 94089 U.S.A.
Tel: (1-408) 745-4900
Fax: (1-408) 745-4970
Email: [email protected]
Web: http://us.fujitsu.com/printers/
Asia Pacific
Fujitsu Components Asia Ltd.
102E Pasir Panjang Road
#01-01 Citilink Warehouse Complex
Singapore 118529
Tel: (65) 6375-8560
Fax: (65) 6273-3021
Email: [email protected]
Web: http://www.fujitsu.com/sg/services/micro/components/
©2007 Fujitsu Components America, Inc. All rights reserved. All trademarks or registered trademarks are the property of their respective
owners.
Fujitsu Components America or its affiliates do not warrant that the content of datasheet is error free. In a continuing effort to improve our
products Fujitsu Components America, Inc. or its affiliates reserve the right to change specifications/datasheets without prior notice.
Rev. December 21, 2007
Similar pages