DLFP Suppression Chokes https://www.schurter.com /PG81_82 Linear/Saturating Choke Approvals and Compliances Description - Linear/saturating choke - Flexible wire - Low noise development by using iron powder toroids instead of conventional iron lamination cores - Fully potted resign Applications - Phase angle control circuits with thyristors, triacs or transistors - The choke acts at its optimum when it is mounted directly at the interference originator (thyristor, triac) Weblinks pdf datasheet, html-datasheet, General Product Information, DistributorStock-Check, Detailed request for product Technical Data Rated voltage Rated Current Power Operating Frequency Terminal Type Weight Material: Housing Sealing Compound up to 440 VAC 5 - 45 A @ Ta 45 °C 50 Hz THT, Flexible wire 149 - 1423 g UL 94V-0 UL 94V-0 Isolation Voltage Climatic Category Allowable Operation Temp. 2 kV eff., winding to ambient 25/100/21 acc. to IEC 60068-1 -25 °C to 100 °C Approvals and Compliances Detailed information on product approvals, code requirements, usage instructions and detailed test conditions can be looked up in Details about Approvals Application standards Application standards where the product can be used Organization Design Standard Description Designed for applications acc. IEC/UL 60950 IEC 60950-1 includes the basic requirements for the safety of information technologyequipment. Details Initiator Description CE declaration of conformity SCHURTER AG The CE marking declares that the product complies with the applicable requirements laid down in the harmonisation of Community legislation on its affixing in accordance with EU Regulation 765/2008. RoHS SCHURTER AG EU Directive RoHS 2011/65/EU China RoHS SCHURTER AG The law SJ / T 11363-2006 (China RoHS) has been in force since 1 March 2007. It is similar to the EU directive RoHS. REACH SCHURTER AG On 1 June 2007, Regulation (EC) No 1907/2006 on the Registration, Evaluation, Authorization and Restriction of Chemicals 1 (abbreviated as "REACH") entered into force. Compliances The product complies with following Guide Lines Identification EMC Products 1 DLFP Suppression Chokes https://www.schurter.com /PG81_82 Dimension [mm] Case 25W Case 47W 50 200 10...20 40 50 32 40 30.8 4.8 (0.8) (0.8) 3.5 3.3 Case 32W 80 70.8 200 6.8 10...20 65 80 65 (0.8) 4.3 2 45.8 5.8 40 40 32 EMC Products 200 10...20 DLFP Suppression Chokes https://www.schurter.com /PG81_82 Diagrams 2) 2) 1) 1) Interference suppression with resistive load, 2-phase 1) Line 2) Load Interference suppression with resisitive load, 2-stage DFSG: Radio interference suppression saturation choke DFK: Radio interference suppression choke magnetically condensated 1) Line 2) Load 2) 2) 1) 1) 3) Interference suppression with resistive load, < 10A, e.g. dimmers circuit (DFSG) 1) Line 2) Load 3) only to protection class I Interference suppression with inductive load 1) Line 2) Load % of nominal current Derating Curves Allowed current versus ambient temperature All Variants In [A] Ln [mH] Inductance drop max [%] Rcu [mΩ] Tripped Power Dissipation fRES [MHz] Cx [µF] Copper ø [mm] Weight [g] Housings Packing unit [pcs.] 5 1 60 120 3 0.8 0.047 1 149 g 25W 10 Order Number DLFP-0125-0501 8 0.5 60 54 3.5 1.32 0.1 1.25 150 g 25W 10 DLFP-0125-08D5 45 0.2 70 6 12 1.1 1 5 1423 g 32W 2 DLFP-0132-45D2 12 0.5 60 38 5.5 1.16 0.1 1.7 350 g 47W 6 DLFP-0147-12D5 16 0.3 60 25 6.4 1.69 0.22 1.8 320 g 47W 6 DLFP-0147-16D3 25 0.15 60 10 6.3 2.5 0.47 2.36 350 g 47W 6 DLFP-0147-25D2 35 0.05 60 5.3 6.5 3.5 1.5 1.5 x 4.5 338 g 47W 6 DLFP-0147-35C5 █ █ Most Popular. EMC Products 3 DLFP In [A] Ln [mH] Suppression Chokes https://www.schurter.com /PG81_82 Inductance drop max [%] Rcu [mΩ] Tripped Power Dissipation fRES [MHz] Cx [µF] Copper ø [mm] Weight [g] Housings Packing unit [pcs.] Order Number Availability for all products can be searched real-time:https://www.schurter.com/en/Stock-Check/Stock-Check-SCHURTER 30.11.2017 Inductance drop at In 4 EMC Products The specifications, descriptions and illustrations indicated in this document are based on current information. All content is subject to modifications and amendments. Information furnished is believed to be accurate and reliable. However, users should independently evaluate the suitability and test each product selected for their own applications.