FEATURES ►SMD Package with Industry Standard Pinout ►Package Dimension: 15.3 x 8.0 x 7.1 mm (0.6”x 0.31”x 0.28”) ►High I/O-Isolation 3000 VDC ►Operating Temp. Range –40° to +85°C ►High Accuracy of Pin Planarity ►Qualified for lead-free reflow solder process according IPC/JEDEC J-STD-020D ►Tape & Reel Package available ►3 Year Product Warranty PRODUCT OVERVIEW The MSAU300 series is a range of 1W DC/DC converters in a SMD- Package featuring high I/O-isolation of 3000VDC.The small footprint makes this product the ideal solution for many applications where a voltage has to be isolated i.e for noise reduction, ground loop elimination, in digital interfaces or where a higher I/O isolation is required. An excellent efficiency allows an operating temperature range of–40°C to +85°C. These converters are fully qualified for the higher temperature profile used in lead-free reflow solder processes. For automated SMD production lines the product can also be supplied in tape& reel package. Model Selection Guide Model Input Output Number Voltage Voltage (Range) VDC MSAU301 MSAU303 MSAU304 MSAU306 MSAU308 MSAU309 MSAU311 MSAU313 MSAU314 MSAU316 MSAU318 MSAU319 MSAU321 MSAU323 MSAU324 MSAU326 MSAU328 MSAU329 5 (4.5 ~ 5.5) 12 (10.8 ~ 13.2) 24 (21.6 ~ 26.4) VDC 5 12 15 ±5 ±12 ±15 5 12 15 ±5 ±12 ±15 5 12 15 ±5 ±12 ±15 Output Current Input Current Max. Min. @Max. Load @No Load mA 200 84 67 ±100 ±42 ±34 200 84 67 ±100 ±42 ±34 200 84 67 ±100 ±42 ±34 mA 4 1.5 1 ±2 ±0.8 ±0.7 4 1.5 1 ±2 ±0.8 ±0.7 4 1.5 1 ±2 ±0.8 ±0.7 mA(typ.) 281 258 258 277 255 258 117 106 104 112 105 104 58 53 53 57 53 53 mA(typ.) Load Max. capacitive Regulation Load Efficiency (typ.) @Max. Load % (max.) 10 7 7 10 7 7 8 5 5 8 5 5 8 5 5 8 5 5 30 12 7 uF 33 4.7 4.7 10# 2.2# 2.2# 33 4.7 4.7 10# 2.2# 2.2# 33 4.7 4.7 10# 2.2# 2.2# # For each output % 71 78 78 72 78 79 71 79 80 74 80 81 71 78 79 72 79 80 Input Specifications Parameter Input Voltage Range Input Surge Voltage (1 sec. max.) Model Min. Typ. Max. 5V Input Models 4.5 5 5.5 12V Input Models 10.8 12 13.2 24V Input Models 21.6 24 26.4 5V Input Models -0.7 --- 9 12V Input Models -0.7 --- 18 24V Input Models -0.7 --- 30 --- --- 0.3 Reverse Polarity Input Current Input Filter Internal Power Dissipation In Total Power International, Inc All Models Unit VDC A Internal Capacitor --- Toll Free: 877-646-0900 --- 550 www.total-power.com mW MSAU300 SERIES Tota Total Power International, Inc. DC/DC CONVERTER 1W, SMD-Package, High Isolation Output Specifications Parameter Conditions Min. Typ. Max. --- ±1.5 ±4.0 % Dual Output, Balanced Loads --- ±0.1 ±1.0 % Line Regulation For Vin Change of 1% --- ±1.2 ±1.5 % Load Regulation Io=20% to 100% Output Voltage Accuracy Output Voltage Balance See Model Selection Guide Ripple & Noise (20MHz) Ripple & Noise (20MHz) Unit Over Line, Load & Temp. --- 75 100 mV P-P --- --- 150 mV P-P Ripple & Noise (20MHz) --- --- 15 mV rms Temperature Coefficient --- ±0.01 ±0.02 %/℃ Short Circuit Protection 0.5 Second Max. General Specifications Parameter Conditions Min. Typ. Max. Unit 60 Seconds 3000 --- --- VDC I/O Isolation Resistance 500 VDC 10 --- --- GΩ I/O Isolation Capacitance 100KHz, 1V I/O Isolation Voltage (rated) Switching Frequency MTBF (calculated) MIL-HDBK-217F@25℃, Ground Benign Moisture Sensitivity Level (MSL) --- 60 100 pF 50 100 150 KHz 2,000,000 --- --- Hours IPC/JEDEC J-STD-020D Level 3 Input Fuse 5V Input Models 500mA Slow-Blow Type 12V Input Models 200mA Slow-Blow Type 24V Input Models 100mA Slow-Blow Type Environmental Specifications Parameter Operating Temperature Range (with Derating) Case Temperature Storage Temperature Range Humidity (non condensing) Cooling Lead Temperature (1.5mm from case for 10Sec.) Conditions Ambient Min. -40 ---50 --Free-Air convection --- Max. +85 +90 +125 95 Unit ℃ ℃ ℃ % rel. H 300 ℃ Power Derating Curve 100 Natural convection 80 100LFM 200LFM 60 400LFM 40 20 0 ~ -40 0 20 40 60 80 100 110 Ambient Temperature ] Notes 1 Specifications typical at Ta=+25℃, resistive load, nominal input voltage and rated output current unless otherwise noted. 2 Ripple & Noise measurement bandwidth is 0-20MHz. 3 These power converters require a minimum output loading to maintain specified regulation, operation under no-load conditions will not damage these 4 All DC/DC converters should be externally fused at the front end for protection. 5 Other input and output voltage may be available, please contact factory. 6 Specifications subject to change without notice. modules; however they may not meet all specifications listed. In Total Power International, Inc Toll Free: 877-646-0900 www.total-power.com MSAU300 SERIES Tota Total Power International, Inc. DC/DC CONVERTER 1W, SMD-Package, High Isolation Package Specifications 8 7 1 5 6 3 5.08 [0.2] 2.54 [0.1] 2.54 [0.10] 1.7 [0.07] 10.8 [0.43] 0~ 5.08 [0.2] R 1.3 [0.05] 12.7 [0.50] 4 0. 5 2 11.2 [0.44] 12 11 10 0.25 [0.01] Connecting Pin Patterns 8.0 [0.31] Mechanical Dimensions ( Magnification of A ) 15.3 [0.6] 6.75 [0.27] 7.0 0.5 [0.28 0.02] 1.0 [0.04] S SEATING PLANE A 7.0 [0.28] 0.25 [0.01] 0.60 [0.02] 5.08 [0.20] 9.2 [0.36] 0.15 S ►All dimensions in mm (inches) ►Tolerance: X.X±0.25 (X.XX±0.01) X.XX±0.13 ( X.XXX±0.005) ►Pins ±0.05 (±0.002) Pin Connections Physical Characteristics Pin Single Output Dual Output 1 -Vin -Vin 2 +Vin +Vin 3 NA NA 5 -Vout Common 6 NA -Vout 7 NA NA 8 +Vout +Vout 10 NA NA 11 NA NA 12 NA NA Case Size : 15.3x8.0x6.75mm (0.60x0.31x0.27 Inches) Case Material : Molding (flammability to UL 94V-0 rated) Weight : 2.2g NA : Not Available for Electrical Connection In Total Power International, Inc Toll Free: 877-646-0900 www.total-power.com Tota Total Power International, Inc. MSAU300 SERIES DC/DC CONVERTER 1W, SMD-Package, High Isolation Test Configurations Input Reflected-Ripple Current Test Setup Input reflected-ripple current is measured with a inductor Lin (4.7uH) and Cin (220uF, ESR < 1.0Ω at 100 KHz) to simulate source impedance. Capacitor Cin, offsets possible battery impedance. Current ripple is measured at the input terminals of the module, measurement bandwidth is 0-500 KHz. To Oscilloscope + + Battery +Vin Lin DC / DC Converter Current Probe Cin +Out -Vin Load -Out Peak-to-Peak Output Noise Measurement Test Use a Cout 0.33uF ceramic capacitor. Scope measurement should be made by using a BNC socket, measurement bandwidth is 0-20 MHz. Position the load between 50 mm and 75 mm from the DC/DC Converter. +Vin +Out Copper Strip Single Output DC / DC Converter -Vin Cout -Out Scope Resistive Load Copper Strip Design & Feature Considerations Maximum Capacitive Load The MSAU300 series has limitation of maximum connected capacitance at the output. The power module may be operated in current limiting mode during start-up, affecting the ramp-up and the startup time. The maximum capacitance can be found in the data sheet. Input Source Impedance The power module should be connected to a low ac-impedance input source. Highly inductive source impedances can affect the stability of the power module. In applications where power is supplied over long lines and output loading is high, it may be necessary to use a capacitor at the input to ensure startup. Capacitor mounted close to the power module helps ensure stability of the unit, it is recommended to use a good quality low Equivalent Series Resistance (ESR < 1.0Ω at 100 KHz) capacitor of a 2.2uF for the 5V input devices, a 1.0uF for the 12V input devices and a 0.47uF for the 24V devices.. + DC Power Source +Vin + +Out DC / DC Converter Load Cin - -Vin -Out Output Ripple Reduction A good quality low ESR capacitor placed as close as practicable across the load will give the best ripple and noise performance. To reduce output ripple, it is recommended to use 1.0uF capacitors at the output. + +Vin DC Power Source - +Out Single Output DC / DC Converter -Vin Cout Load -Out Thermal Considerations Many conditions affect the thermal performance of the power module, such as orientation, airflow over the module and board spacing. To avoid exceeding the maximum temperature rating of the components inside the power module, the case temperature must be kept below 90℃. The derating curves are determined from measurements obtained in a test setup. Position of air velocity probe and thermocouple 50mm / 2in 15mm / 0.6in In Total Power International, Inc Air Flow DUT Toll Free: 877-646-0900 www.total-power.com