MPS45 45W S i n g l e Ou t p ut f or M edi c al Ty pe series Universal AC input Low leakage current ≤ 0.3mA Protections: Short circuit / Overload / Over voltage / Over temperature Fixed switching frequency at 45KHz Cooling by free air convection Model Number Output Volts MPS45-3.3 MPS45-5 MPS45-7.5 MPS45-12 MPS45-13.5 MPS45-15 MPS45-24 MPS45-27 MPS45-48 3.3 Volts(DC) 5 Volts(DC) 7.5 Volts(DC) 12 Volts(DC) 13.5 Volts(DC) 15 Volts(DC) 24 Volts(DC) 27 Volts(DC) 48 Volts(DC) SINGLE OUTPUT Output Amps 8.0 Amps 8.0 Amps 5.4 Amps 3.7 Amps 3.3 Amps 3.0 Amps 1.9 Amps 1.7 Amps 1.0 Amps WWW.ASTRODYNETDI.COM Ripple & Noise 80mV pk-pk 100mV pk-pk 100mV pk-pk 100mV pk-pk 100mV pk-pk 100mV pk-pk 100mV pk-pk 100mV pk-pk 100mV pk-pk Line Reg Load Reg Tolerance Min Load ±1.0% ±1.0% ±1.0% ±1.0% ±1.0% ±1.0% ±1.0% ±1.0% ±1.0% ±3.0% ±3.0% ±3.0% ±2.0% ±2.0% ±2.0% ±2.0% ±2.0% ±2.0% ±3.0% ±3.0% ±3.0% ±2.0% ±2.0% ±2.0% ±2.0% ±2.0% ±2.0% 0~10.7 Amps 0~10.5 Amps 0~7 Amps 0~4.4 Amps 0~3.9 Amps 0~3.5 Amps 0~2.2 Amps 0~1.95 Amps 0~1.1 Amps Efficiency 65% 72% 75% 76% 76% 77% 78% 78% 78% ASTRODYNE USA: 1-800-823-8082 ASTRODYNE PACIFIC: 886-2-26983458 MPS45 45W S i n g l e Ou t p ut f or M edi c al Ty pe INPUT SPECIFICATIONS Input Voltage Range Frequency Range Inrush Current, typ: (cold start) Input Current Leakage current 90-264VAC / 127-370 Volts(DC) 47-440 Hz 15 Amps @ 115VAC Input 30 Amps @ 230VAC 1.2 Amps max @ 115VAC 0.7 Amps max @ 230VAC < 0.3mA / 230VAC OUTPUT SPECIFICATIONS Voltage and Current Line Regulation Load Regulation Voltage Tolerance (Note 2) Ripple/Noise (Note 1) Hold Up Time @ FL Setup, Rise Time @ FL Over Temperature Protection Over Voltage Protection Over Current Protection DC Voltage Adjust See Selection Chart See Selection Chart See Selection Chart See Selection Chart See Selection Chart 50mS @ 230VAC 16mS @ 115VAC 800mS, 30mS/230VAC 1200mS. 30mS/115VAC Tj 135°C typ. (U1) detect on main conrol IC, auto recover 115~135% Hiccup mode, auto recover 53~75W rated output power 36~55W (3.3Volts DC) Hiccup mode, auto recover ±10% GENERAL SPECIFICATIONS Safety Insulation Resistance EMI Harmonic Current UL2601-1 TUV EN60601-1 IEC60601-1 approved ≥ 100MΩ / 500 Volts(DC) Compliance to EN55011 (CISPR11) Class B Compliance to EN61000-3-2,-3 series Efficiency See Selection Chart Isolation 4000VAC Input - Output 1500VAC Input - Ground 500VAC Output - Ground EMS Compliance to EN61000-4-2,3,4,5,6,8,11; ENV50204, EN55024, EN60601-1-2, medical level, criteria A ENVIRONMENTAL SPECIFICATIONS Oper. Temperature Storage Temperature Relative Humidity Temperature Coefficient MTBF Vibration -10°C to +60°C (See Derate Curve) -20°C to +85°C, 10~95% RH 20 to +90% RH non cond 0.04% / °C (0-50°C) 366.7KHrs min, MIL-HDBK-217F(25°C) 10~500Hz, 2G10min./1cycle, period for 60min. each along X, Y, Z axes PHYSICAL SPECIFICATIONS Size Millimeters 127 x 76 x 28 Inches 5” x 2.99” x 1.10” Weight 6.35 oz (180g) NOTE 1. Ripple and Noise are measured at 20MHz of bandwidth by using a 12” twisted pair-wire terminated with a 0.1uf & 47 uf parallel capacitor. 2. Tolerance: includes set up tolerance, line regulation and load regulation. 3. Mounting holes M1 and M2 should be grounded for EMI purposes. All specifications are typical at nominal input, full load, and 25°C unless otherwise noted WWW.ASTRODYNETDI.COM ASTRODYNE USA: 1-800-823-8082 ASTRODYNE PACIFIC: 886-2-26983458 45W S i n g l e Ou t p ut f or M edi c al Ty pe WWW.ASTRODYNETDI.COM MPS45 series ASTRODYNE USA: 1-800-823-8082 ASTRODYNE PACIFIC: 886-2-26983458 45W S i n g l e Ou t p ut f or M edi c al Ty pe WWW.ASTRODYNETDI.COM MPS45 series ASTRODYNE USA: 1-800-823-8082 ASTRODYNE PACIFIC: 886-2-26983458