Mean Well MES30A 16.5~30wac-dc single output and medical type desktop Datasheet

MES30A
16.5~30W AC-DC Single Output and Medical Type Desktop
series
Features :
Universal AC input / Full range
3 pole AC inlet IEC320-C14
Class power ( with earth pin)
Full output 3~48V safety approval
Protections: Short circuit / Overload / Over voltage / Over temp.
Fully enclosed plastic case
Fix switching frequency and regulation
Topology: Top switch circuit
LED indicator for power on
Approvals: UL / CUL / TUV / CB / CE
2 years warranty
EN 60601-1
IEC 60601-1
SPECIFICATION
ORDER NO.
MES30A-0P1J MES30A-1P1J MES30A-1-1P1J MES30A-2P1J MES30A-3P1J MES30A-4P1J MES30A-5P1J MES30A-6P1J MES30A-7P1J MES30A-8P1J
SAFETY MODEL NO.
DC VOLTAGE
OUTPUT
MES30A-0 MES30A-1 MES30A-1-1 MES30A-2 MES30A-3 MES30A-4 MES30A-5 MES30A-6 MES30A-7 MES30A-8
Note.2 3.3V
5V
7.5V
9V
12V
15V
18V
24V
28V
48V
5A
3.33A
3.33A
2.5A
2.0A
1.66A
1.25A
1.07A
0.62A
0 ~ 1.25A
0 ~ 1.07A
0 ~ 0.62A
30W
30W
30W
100mVp-p
100mVp-p
RATED CURRENT
5A
CURRENT RANGE
0 ~ 5A
0 ~ 5A
0 ~ 3.33A
0 ~3.33A
0 ~ 2.5A
0 ~ 2.0A
0 ~ 1.66A
RATED POWER
16.5W
25W
25W
30W
30W
30W
30W
30mVp-p
40mVp-p
50mVp-p
50mVp-p
60mVp-p
70mVp-p
80mVp-p
Fixed
VOLTAGE ADJ. RANGE
VOLTAGE TOLERANCE Note.4 8.0%
RIPPLE & NOISE (max.) Note.3 30mVp-p
5.0%
4.0%
4.0%
3.0%
2.0%
2.0%
2.0%
2.0%
2.0%
LINE REGULATION
Note.5
1.0%
1.0%
1.0%
1.0%
1.0%
1.0%
1.0%
1.0%
1.0%
1.0%
LOAD REGULATION
Note.6
8.0%
5.0%
4.0%
4.0%
3.0%
2.0%
2.0%
2.0%
2.0%
2.0%
SETUP, RISE, HOLD UP TIME 300ms, 50ms, 16ms at full load
INPUT
VOLTAGE RANGE
90 ~ 264VAC 135 ~ 370VDC
FREQUENCY RANGE
47 ~ 63Hz
EFFICIENCY (Typ.)
56%
AC CURRENT
INRUSH CURRENT (max.)
0.8A / 100VAC
LEAKAGE CURRENT (max.)
OVERLOAD
PROTECTION OVER VOLTAGE
OVER TEMPERATURE
WORKING TEMP.
WORKING HUMIDITY
ENVIRONMENT STORAGE TEMP., HUMIDITY
TEMP. COEFFICIENT
VIBRATION
SAFETY STANDARDS
WITHSTAND VOLTAGE
SAFETY &
ISOLATION RESISTANCE
EMC
EMI CONDUCTION & RADIATION
(Note. 7)
HARMONIC CURRENT
EMS IMMUNITY
MTBF
OTHERS
CONNECTOR
NOTE
DIMENSION
70%
72%
74%
76%
78%
78%
80%
80%
82%
35A / 230VAC
0.3mA / 240VAC
150~350% rated output power
112 ~ 250% rated output power
Protection type : Hiccup mode, recovers automatically after fault condition is removed
110 ~ 140% rated output voltage
Protection type : Hiccup mode, recovers automatically after fault condition is removed
Tj 135 typically (IC1) detect on main control IC
Protection type : Shut down o/p voltage, recovers automatically after temperature goes down
0 ~ +65 (Refer to output load derating curve)
20% ~ 90% RH non-condensing
-20 ~ +85
, 10 ~ 95% RH
0.03% / ( 0 ~ 50 )
10 ~ 500Hz, 2G 10min./1cycle, period for 60min. each along X, Y, Z axes
UL2601-1, IEC601-1, EN60601-1 approved
I/P-O/P: 5656VDC , I/P-FG: 2828VDC
I/P-O/P, I/P-FG:100M Ohms / 500VDC / 25
/ 70% RH
Compliance to EN55011(CISPR11) class B
Compliance to EN61000-3-2,3
Compliance to EN60601-1-2 (EN61000-4-2,3,4,5,6,8,11), ENV50204, light industry level, criteria A
400Khrs min.
MIL-HDBK-217F (25
)
108*67*36mm (L*W*H)
0.3kg ; 54pcs/ 20kg / CARTON
PACKING
PLUG
Standard type P1J: 2.1
CABLE
SPT-2 16AWG 4FT for 3.3 ~ 7.5V ; UL1185 18AWG 6FT for 9 ~48V
* 5.5
* 11mm, turning fork type, center positive for stock ; Other type available by customer requested
1.All parameters are specified at 230VAC input, rated load, 25 70% RH ambient.
2.DC voltage: The output voltage set at point measure by plug terminal & 50% load.
3.Ripple & noise are measured at 20MHz by using a 12" twisted pair terminated with a 0.1uf & 47uf capacitor.
4.Tolerence: includes set up tolerance, line regulation, load regulation.
5.Line regulation is measured from low line to high line at rated load.
6.Load regulation is measured from 0% to 100% rated load.
7.The power supply is considered a component which will be installed into a final equipment. The final equipment must be re-confirmed that it still meets
EMC directives.
File Name:MES30A-SPEC 2009-02-20
M
U SE PS -3202A5 sseerriiee ss
16.5~30W AC-DC Single Output and Medical Type Desktop
Mechanical Specification
Unit:mm
36
SPT-2 16AWG 4ft for 3.3V,5V,7.5V
UL 1185 18AWG 6ft for others
106
36
11
100 10mm
67
SWITCHING ADAPTOR
C"+"
POWER LED
ID 2.1 x OD 5.5
108
69.9
Plug Assignment
18
33.5
Standard plug: P1J (option)
3
67
42
45
P1J
R1
OUTPUT
CENTER
+
RUBBER FOOTX4
NAME PLATE
Static Characteristics
Derating Curve
100
LOAD (%)
100
LOAD (%)
P/N
50
0
15
30
40 45
Ta (
60
)
70
80
60
0
50
60
70
80
90 100
260
INPUT VOLTAGE
File Name:MES30A-SPEC 2009-02-20
Similar pages