NOD 5000 SERIES BROADBAND NOISE INSTRUMENTS 10HZ TO 18GHZ Description NOD Series Noise Instruments are portable, small and lightweight (less than 10 lbs.) and designed to provide accurate carrier-tonoise measurements in the lab, field or factory. An attenuator is included and calibrated at the connector, so there’s no need to compensate for external control components. Specifications NOD SERIES OUTPUT CHARACTERISTICS MODEL FREQUENCY FLATNESS VSWR RF OUTPUT POWER (dBm/Hz) (dBm) NOD-2000 1.8GHz-2.2GHz ±0.5 dB 2.0:1 -77 +10 NOD-5101 10Hz-20kHz ±0.5 dB 1.5:1 -33 +10 NOD-5102 NOD-5103 10Hz-100kHz 10Hz-500kHz ±0.5 dB ±0.5 dB 1.5:1 1.5:1 -40 -47 +10 +10 NOD-5104 100Hz-3MHz ±0.75 dB 1.5:1 -55 +10 NOD-5105 NOD-5106 100Hz-10MHz 100Hz-25MHz ±1.0 dB ±1.25 dB 1.5:1 1.5:1 -60 -64 +10 +10 NOD-5107 100Hz-100MHz ±1.5 dB 1.5:1 -70 +10 NOD-5108 NOD-5109 100Hz-300MHz 100Hz-500MHz ±2.0 dB ±2.0 dB 1.5:1 1.5:1 -75 -77 +10 +10 NOD-5110 300MHz-1GHz ±2.0 dB 1.5:1 -79 +10 NOD-5111 NOD-5112 1GHz-2GHz 10MHz-2GHz ±2.0 dB ±2.0 dB 2.0:1 2.0:1 -80 -83 +10 +10 NOD-5124 2GHz-4GHz ±2.0 dB 2.0:1 -103 -10 NOD-5200 NOD-5250 100Hz-1GHz 100Hz-1500MHz ±2.0 dB ±2.5 dB 2.0:1 2.2:1 -80 -83 +10 +10 NOD-5300 2GHz-18GHz ±3.0 dB 2.5:1 -112 -10 n Optional 2nd & 3rd Rotary Attenuators available n Calibration Services offered MICRONETICS / 26 HAMPSHIRE DRIVE / HUDSON, NH 03051 / TEL: 603-883-2900 / FAX: 603-882-8987 n Operating Temperature: 0 to +70 oC n Supply Voltage: 110 VAC/60 Hz or 220 VAC/50 Hz n Temperature Stability: .025 dB/o C n Output Impedance: 50 ohm n Peak Factor: 5:1 n Attenuation Range: 0 dB to 10 dB in 1 dB steps or 0 dB to 100 dB in 10 dB steps n Dimensions: 9.38”W x 3.96”H x 10.75”D Applications n Simulation of spread spectrum signals (CDMA) n Carrier-to-noise measurement n Bit error rate testing n Y Factor measurements n Modem testing WEB: WWW.MICRONETICS.COM