EMC Common Mode Choke& xDSL CO Transformer <SMD Type: CPFC Series> Type: CPFC85 ◆ Product Description ・9.3×8.2mm Max.(L×W), 5.5mm Max. Height . ◆ Feature ・Ideally used as EMC common mode choke and xDSL CO transformer. ・RoHS Compliance. ◆ Dimensions (mm) 6.9±0.3 0.5 9.1±0.2 7.2±0.1 1.8 5.5 MAX. 8.0±0.2 3.4±0.2 9.1±0.2 0.05±0.05 ◆ Land Pattern (mm) 1.5 ◆ Schematics (Bottom) 6.5 1.5 ② ③ ② ③ ① ④ ① ④ 2.0 2.5 3.0 MARK OF POLARITY 2.5 2.8 0.9 Mark of polarity For partname: CPFC85NP-100M03 CPFC85NP-100M10 For partname: CPFC85-1M15NP SILK SCREEN ◆ Specification (For xDSL CO Transformer Use) Core Part Name Material Stamp Impedance (KΩ)<Min.> <REF.> (1-4),(2-3) D.C.R. (mΩ)<Max.> (1-4),(2-3) Rated current (1-2)(A) ※1 (3-4) shorted CPFC85NP-100M03 Ni-Zn 0M03 0.3(@100MHz) 20 5.0 CPFC85NP-100M10 Ni-Zn 0M10 1.0(@100MHz) 25 3.0 ※ 1.Rated current: The DC current at which the temperature rise is △t＝40℃.(Ta＝20℃). Specification (For EMC Common Mode Choke Use) Core Part Name Material CPFC85-1M15NP Mn-Zn Stamp Inductance (1-4),(2-3) @ 100kHz 1M15 4.7mH±30% Within Common mode attenuation(1-4,2-3) D.C.R. (1-2) ※2 Isolation voltage (3-4), 1 minute 30dB(Typ.)@100kHz 2.0ΩMax. at 20℃ (3-4)shorted 500Vrms AC 43dB(Typ.)@1MHz 34dB(Typ.)@10MHz ※2. D.C.R. is measured by 2 lines as series because impedance will be deteriorated when D.C.R. is measured by 1 line. Please refer to the sales offices on our website for a representative near you www.sumida.com 1/1